Qiang Wu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Qiang Wu has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Bin Li
School of Electronic Information, Wuhan University, Wuhan, China
3 shared publications - Erdal Panayirci
Kadir Has University
3 shared publications - Huilin Jiang
Nanjing Xiaozhuang University, Nanjing, China
3 shared publications - Yulin Hu
Wuhan University
3 shared publications - Zhicheng Dong
Tibet University
3 shared publications - Binbin Jing
School of Transportation and Civil Engineering, Nantong University, Nantong, China
1 shared publication
Latest Publications
- 29 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 24 (11) , 9264-9281
Energy-Efficient Secure Design for IOS and AN Aided CF-mMIMO Network
Intelligent Omni-Surface (IOS) has attracted considerable attention for its advantages of high energy efficiency, which are similar to those of Reconfigurable Intelligent Surface (RIS), while also being able to overcome the limited scope of RIS services. In this paper, we provide a security energy efficiency (SEE) maximization design for IOS and artificial noise (AN) assisted cell-free massive MIMO (CF-mMIMO) networks, via jointly optimizing the transmission beamforming and AN covariance matrix of the AP, the reflection and transmission phase-shift matrices of the IOS, and the reflection-transmission power ratio of the IOS. To handle the formulated problem with non-convexity and high complexity, we first decouple it into two sub-problems. Then, we design low-complexity algorithms for each sub-problem i.e., an AP transmission beamforming and AN noise covariance matrix joint optimization algorithm based on the SSNCG-ALM, and an IOS reflection and transmission phase-shift matrix joint optimization algorithm based on the RPM-TR. Finally, a SEE maximization iterative algorithm based on block coordinate descent and successive convex approximation is established. The simulation results demonstrate that the proposed design significantly enhances the SEE of CF-mMIMO networks.
- 29 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 24 (11) , 9264-9281
Energy-Efficient Secure Design for IOS and AN Aided CF-mMIMO Network
Intelligent Omni-Surface (IOS) has attracted considerable attention for its advantages of high energy efficiency, which are similar to those of Reconfigurable Intelligent Surface (RIS), while also being able to overcome the limited scope of RIS services. In this paper, we provide a security energy efficiency (SEE) maximization design for IOS and artificial noise (AN) assisted cell-free massive MIMO (CF-mMIMO) networks, via jointly optimizing the transmission beamforming and AN covariance matrix of the AP, the reflection and transmission phase-shift matrices of the IOS, and the reflection-transmission power ratio of the IOS. To handle the formulated problem with non-convexity and high complexity, we first decouple it into two sub-problems. Then, we design low-complexity algorithms for each sub-problem i.e., an AP transmission beamforming and AN noise covariance matrix joint optimization algorithm based on the SSNCG-ALM, and an IOS reflection and transmission phase-shift matrix joint optimization algorithm based on the RPM-TR. Finally, a SEE maximization iterative algorithm based on block coordinate descent and successive convex approximation is established. The simulation results demonstrate that the proposed design significantly enhances the SEE of CF-mMIMO networks.
- 9 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 11 (24) , 40933-40950
Joint Resource Allocation in Multi-RIS and Massive MIMO-Aided Cell-Free IoT Networks
To meet the needs of high energy efficiency (EE) and various heterogeneous services for 6G, in this article, we probe into the EE of reconfigurable intelligent surfaces (RISs) subsurface (SSF) architecture-aided cell-free Internet of Things (CF-IoT) networks. Specifically, we jointly optimize the base station (BS)-RIS-IoT device (ID) joint associations, the RIS’s phase shift matrix (PSM), and the BS’s transmit power to enhance CF-IoT’s EE. The elevated complexity (NP-hard) and nonconvexity of the formulated problem pose significant challenges, making the solution highly difficult and intricate. To handle this challenging problem, we first develop an alternating optimization framework based on block coordinate descent, which can decouple the original problem into several subproblems. We then carefully design the corresponding low-complexity algorithm for each subproblem to solve it. Moreover, the proposed joint optimization framework serves as a versatile solution applicable to a wide range of scenarios aiming to maximize EE with the assistance of RISs. Simulations confirm that deploying RISs in CF-IoT scenarios is beneficial for improving the EE of the system, and the SSF architecture can further enhance the EE of the system.
- 9 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 11 (24) , 40933-40950
Joint Resource Allocation in Multi-RIS and Massive MIMO-Aided Cell-Free IoT Networks
To meet the needs of high energy efficiency (EE) and various heterogeneous services for 6G, in this article, we probe into the EE of reconfigurable intelligent surfaces (RISs) subsurface (SSF) architecture-aided cell-free Internet of Things (CF-IoT) networks. Specifically, we jointly optimize the base station (BS)-RIS-IoT device (ID) joint associations, the RIS’s phase shift matrix (PSM), and the BS’s transmit power to enhance CF-IoT’s EE. The elevated complexity (NP-hard) and nonconvexity of the formulated problem pose significant challenges, making the solution highly difficult and intricate. To handle this challenging problem, we first develop an alternating optimization framework based on block coordinate descent, which can decouple the original problem into several subproblems. We then carefully design the corresponding low-complexity algorithm for each subproblem to solve it. Moreover, the proposed joint optimization framework serves as a versatile solution applicable to a wide range of scenarios aiming to maximize EE with the assistance of RISs. Simulations confirm that deploying RISs in CF-IoT scenarios is beneficial for improving the EE of the system, and the SSF architecture can further enhance the EE of the system.
- 23 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 73 (3) , 3767-3785
Energy-Efficient Design for Reconfigurable Intelligent Surface Aided Cell-Free Ultra Dense HetNets
In this article, we investigate the energy efficiency (EE) of reconfigurable intelligent surfaces (RISs) aided cell-free ultra-dense HetNets (CFUDN). To maximize the EE of CFUDN, users (UEs) association and clustering, RISs subsurface (SSF) associations are carefully designed. Then, the phase shift matrix of RISs and transmission power of base stations (BSs) are jointly optimized. Due to the non-convexity and high complexity of the formulated problem, this jointly optimized problem is usually difficult to solve. At present, the most commonly adopted method to deal with joint optimization problems is the block coordinate descent (BCD) algorithm based on an alternative optimization framework. However, as we all know, the BCD algorithm has some degree of performance loss due to the alternate optimization of variables. To overcome this challenging issue, a novel joint optimization framework based on Riemannian product manifolds (RPM) is proposed, in which the phase shift matrix of RISs and transmission power of BSs can be simultaneously optimized rather than alternating ways. The simulation results and computational complexity analysis demonstrate that the joint optimization framework based on the RPM exhibits superior performance and lower complexity compared to the joint optimization algorithm based on the BCD.
- 23 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 73 (3) , 3767-3785
Energy-Efficient Design for Reconfigurable Intelligent Surface Aided Cell-Free Ultra Dense HetNets
In this article, we investigate the energy efficiency (EE) of reconfigurable intelligent surfaces (RISs) aided cell-free ultra-dense HetNets (CFUDN). To maximize the EE of CFUDN, users (UEs) association and clustering, RISs subsurface (SSF) associations are carefully designed. Then, the phase shift matrix of RISs and transmission power of base stations (BSs) are jointly optimized. Due to the non-convexity and high complexity of the formulated problem, this jointly optimized problem is usually difficult to solve. At present, the most commonly adopted method to deal with joint optimization problems is the block coordinate descent (BCD) algorithm based on an alternative optimization framework. However, as we all know, the BCD algorithm has some degree of performance loss due to the alternate optimization of variables. To overcome this challenging issue, a novel joint optimization framework based on Riemannian product manifolds (RPM) is proposed, in which the phase shift matrix of RISs and transmission power of BSs can be simultaneously optimized rather than alternating ways. The simulation results and computational complexity analysis demonstrate that the joint optimization framework based on the RPM exhibits superior performance and lower complexity compared to the joint optimization algorithm based on the BCD.
- Open Access
- 11 October 2023
- Published by Wiley in Journal of Advanced Transportation
- Vol. 2023 (1) , 1-15
Analysis of Injury Severity of Drivers Involved Different Types of Two-Vehicle Crashes Using Random-Parameters Logit Models with Heterogeneity in Means and Variances
This study proposes random-parameters multinomial logit models, with heterogeneity in means and variances, to explore the differences in the factors influencing injury severities of drivers involved in different types of two-vehicle crashes. The models are verified using crash data from the United Kingdom (UK) over three years (2016–2018). Three types of crashes are separately identified (car-car, car-truck, and truck-truck crashes). In this study, a wide variety of potential variables, including the driver, vehicle, road, and environmental characteristics, are considered, with two possible injury-severity outcomes: severe and slight injury. The results show that unobserved heterogeneity existed for young drivers in both car-car and truck-truck crash models and the 30 mph speed limit in the three separate models. Remarkably variations are observed in crashes involving different types of vehicles. The driver’s age and gender, speeding, sideswipes, presence of junctions, weekdays, unlit, and weather conditions significantly impact driver-injury severities in various types of vehicle crashes. These findings are expected to help policymakers seek to improve highway safety and implement proper safety countermeasures.
- 11 October 2023
- Published by Wiley in Journal of Advanced Transportation
- Vol. 2023 (1) , 1-15
Open AccessAnalysis of Injury Severity of Drivers Involved Different Types of Two-Vehicle Crashes Using Random-Parameters Logit Models with Heterogeneity in Means and Variances
This study proposes random-parameters multinomial logit models, with heterogeneity in means and variances, to explore the differences in the factors influencing injury severities of drivers involved in different types of two-vehicle crashes. The models are verified using crash data from the United Kingdom (UK) over three years (2016–2018). Three types of crashes are separately identified (car-car, car-truck, and truck-truck crashes). In this study, a wide variety of potential variables, including the driver, vehicle, road, and environmental characteristics, are considered, with two possible injury-severity outcomes: severe and slight injury. The results show that unobserved heterogeneity existed for young drivers in both car-car and truck-truck crash models and the 30 mph speed limit in the three separate models. Remarkably variations are observed in crashes involving different types of vehicles. The driver’s age and gender, speeding, sideswipes, presence of junctions, weekdays, unlit, and weather conditions significantly impact driver-injury severities in various types of vehicle crashes. These findings are expected to help policymakers seek to improve highway safety and implement proper safety countermeasures.
- Open Access
- 1 January 2022
- Published by Wiley in Discrete Dynamics in Nature and Society
- Vol. 2022 (1)
Interference Mitigation Based on Low Complexity Subspace Tracking Method for Vehicle Positioning
Advanced driver assistance systems and automatic driving have drawn lots of attentions due to user’s multiapplication needs. Among different technologies, the integration of Inertial Navigation System (INS) and Global Navigation Satellite System (GNSS) is a key technique with the decreasing costs of Inertial Measurement Unit (IMU) and the increasing deployment of GNSS for navigation applications. Although the integration may have immune ability to interference in a certain extent, interference suppression strategy applied on the integration system can greatly improve the performance. A complete framework including interference monitor, detection, and mitigation is provided jointly using subspace tracking method and Kalman filter measurements innovation of INS and GNSS. The proposed monitor is simple, efficient, and can decide when to start the interference mitigation procedure, which can reduce the computation complexity significantly; Subspace‐based method is introduced to track the interference basis matrix that can be feed to RootMUSIC to detect the frequency of interference, followed by the interference mitigation with a notch filter. The proposed framework has superior performance than the well‐known time‐frequency algorithm, such as short‐time Fourier transform (STFT) and smoothed pseudo Wigner‐Ville distribution (SPWVD), and can improve the performance of INS/GNSS system in the presence of interference with simulation verification.
- 1 January 2022
- Published by Wiley in Discrete Dynamics in Nature and Society
- Vol. 2022 (1)
Open AccessInterference Mitigation Based on Low Complexity Subspace Tracking Method for Vehicle Positioning
Advanced driver assistance systems and automatic driving have drawn lots of attentions due to user’s multiapplication needs. Among different technologies, the integration of Inertial Navigation System (INS) and Global Navigation Satellite System (GNSS) is a key technique with the decreasing costs of Inertial Measurement Unit (IMU) and the increasing deployment of GNSS for navigation applications. Although the integration may have immune ability to interference in a certain extent, interference suppression strategy applied on the integration system can greatly improve the performance. A complete framework including interference monitor, detection, and mitigation is provided jointly using subspace tracking method and Kalman filter measurements innovation of INS and GNSS. The proposed monitor is simple, efficient, and can decide when to start the interference mitigation procedure, which can reduce the computation complexity significantly; Subspace‐based method is introduced to track the interference basis matrix that can be feed to RootMUSIC to detect the frequency of interference, followed by the interference mitigation with a notch filter. The proposed framework has superior performance than the well‐known time‐frequency algorithm, such as short‐time Fourier transform (STFT) and smoothed pseudo Wigner‐Ville distribution (SPWVD), and can improve the performance of INS/GNSS system in the presence of interference with simulation verification.