Timothy Sands
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Timothy Sands has a total of 75 co-authors. Here are the top co-authors by number of shared publications:
Jae Jun Kim
6 shared publicationsBrij N. Agrawal
4 shared publications- Andre Pittella
Sibley School of Mechanical and Aerospace Engineering, Cornell University, Ithaca, NY 14850, USA
3 shared publications - Emily Kuck
Sibley School of Mechanical and Aerospace Engineering, Cornell University, Ithaca, NY 14853, USA
3 shared publications - Sung Mo Koo
Sibley School of Mechanical and Aerospace Engineering, Cornell University, Ithaca, NY 14853, USA
3 shared publications - Alex Rizzo
Department of Mechanical and Aerospace Engineering, Naval Postgraduate School, Monterey, CA 93943, USA
2 shared publications
Latest Publications
- Open Access
Autogenetic Gravity Center Placement
Operations by space drones mandate significant autonomy. This study experimentally evaluates key proposed applications of autonomy. Center of gravity auto-location is proposed using autonomous identification of mass properties, necessitating nonlinear state estimation. Nonlinear, coupled governing kinetics are strictly adopted as the control, and inversion provides closed-form estimates of mass properties. Seminally neglecting the diagonal inertia moments, the inertia cross-products are utilized to exactly find the mass center coordinates using the parallel axis theorem to parameterize the location coordinates. In December 2024, experiments were performed in space for hours, validating the approaches proposed. The findings indicate the longitudinal distribution was quite symmetric. Meanwhile, the lateral distribution was quite off-balance. Estimation convergence of the mass center coordinates was improved compared to the state-of-the-art comparative benchmark. In hundreds of days, the latter achieved millimeter convergence, while in minutes, the former achieved hundreds of millimeters convergence.
Open AccessAutogenetic Gravity Center Placement
Operations by space drones mandate significant autonomy. This study experimentally evaluates key proposed applications of autonomy. Center of gravity auto-location is proposed using autonomous identification of mass properties, necessitating nonlinear state estimation. Nonlinear, coupled governing kinetics are strictly adopted as the control, and inversion provides closed-form estimates of mass properties. Seminally neglecting the diagonal inertia moments, the inertia cross-products are utilized to exactly find the mass center coordinates using the parallel axis theorem to parameterize the location coordinates. In December 2024, experiments were performed in space for hours, validating the approaches proposed. The findings indicate the longitudinal distribution was quite symmetric. Meanwhile, the lateral distribution was quite off-balance. Estimation convergence of the mass center coordinates was improved compared to the state-of-the-art comparative benchmark. In hundreds of days, the latter achieved millimeter convergence, while in minutes, the former achieved hundreds of millimeters convergence.
- Open Access
- 12 June 2025
- Published by MDPI AG in Technologies
- Vol. 13 (6) , 246
Center of Mass Auto-Location in Space
Maintaining a spacecraft’s center of mass at the origin of a body-fixed coordinate system is often key to precision trajectory tracking. Typically, the inertia matrix is estimated and verified with preliminary ground testing. This article presents groundbreaking preliminary results and significant findings from on-orbit space experiments validating recently proposed methods as part of a larger study over multiple years. Time-varying estimates of inertia moments and products are used to reveal time-varying estimates of the location of spacecraft center of mass using geosynchronous orbiting test satellites proposing a novel two-norm optimal projection learning method. Using the parallel axis theorem, the location of the mass center is parameterized using the cross products of inertia, and that information is extracted from spaceflight maneuver data validating modeling and simulation. Mass inertia properties are discerned, and the mass center is experimentally revealed to be over thirty centimeters away from the assumed locations in two of the three axes. Rotation about one axis is found to be very well balanced, with the center of gravity lying on that axis. Two-to-three orders of magnitude corrections to inertia identification are experimentally demonstrated. Combined-axis three-dimensional maneuvers are found to obscure identification compared with single-axis maneuvering as predicted by the sequel analytic study. Mass center location migrates 36–95% and subsequent validating experiments duplicate the results to within 0.1%.
- 12 June 2025
- Published by MDPI AG in Technologies
- Vol. 13 (6) , 246
Open AccessCenter of Mass Auto-Location in Space
Maintaining a spacecraft’s center of mass at the origin of a body-fixed coordinate system is often key to precision trajectory tracking. Typically, the inertia matrix is estimated and verified with preliminary ground testing. This article presents groundbreaking preliminary results and significant findings from on-orbit space experiments validating recently proposed methods as part of a larger study over multiple years. Time-varying estimates of inertia moments and products are used to reveal time-varying estimates of the location of spacecraft center of mass using geosynchronous orbiting test satellites proposing a novel two-norm optimal projection learning method. Using the parallel axis theorem, the location of the mass center is parameterized using the cross products of inertia, and that information is extracted from spaceflight maneuver data validating modeling and simulation. Mass inertia properties are discerned, and the mass center is experimentally revealed to be over thirty centimeters away from the assumed locations in two of the three axes. Rotation about one axis is found to be very well balanced, with the center of gravity lying on that axis. Two-to-three orders of magnitude corrections to inertia identification are experimentally demonstrated. Combined-axis three-dimensional maneuvers are found to obscure identification compared with single-axis maneuvering as predicted by the sequel analytic study. Mass center location migrates 36–95% and subsequent validating experiments duplicate the results to within 0.1%.
- Open Access
- 30 April 2025
- Published by IntechOpen in AI, Computer Science and Robotics Technology
- Vol. 4
Editorial—Introducing Rising Stars 2025: A New Platform for Emerging Voices in AI, Computer Science, and Robotics
- 30 April 2025
- Published by IntechOpen in AI, Computer Science and Robotics Technology
- Vol. 4
Open AccessEditorial—Introducing Rising Stars 2025: A New Platform for Emerging Voices in AI, Computer Science, and Robotics
- Open Access
- 8 April 2025
- Published by MDPI AG in Technologies
- Vol. 13 (4) , 148
Autonomous Real-Time Mass Center Location and Inertia Identification for Grappling Space Robotics
Grappling actions by space robots for the purposes of stabilizing, refueling, repair, and equipment replacement necessitate the autonomous abilities of a single grappling space robot to rapidly contend with large variations in total system inertia rapidly shifting a system’s center of mass, as targets can be massive with possibly unknown or poorly known mass inertia properties. Grappling actions yield opportunities for a novel online calculation of the time-varying location of the combined system’s center of mass. Two-norm optimal nonlinear, projection regression-based learning is implemented and juxtaposed to a comparative benchmark both qualitatively and quantitatively supported by a comparison of enhancements of Luenberger observers. Analysis precedes modeling and simulation to verify the design, and then, spaceflight experiments are proposed for the sequel to validate the simulation results. Time-varying mass locations are discerned, and the time-varying location of the mass center is revealed to be 36–95 percent different than initially assumed, and 58–317 percent corrections to inertia identification are demonstrated. Combined three-dimensional maneuvers obscures identification compared to single-axis maneuvering.
- 8 April 2025
- Published by MDPI AG in Technologies
- Vol. 13 (4) , 148
Open AccessAutonomous Real-Time Mass Center Location and Inertia Identification for Grappling Space Robotics
Grappling actions by space robots for the purposes of stabilizing, refueling, repair, and equipment replacement necessitate the autonomous abilities of a single grappling space robot to rapidly contend with large variations in total system inertia rapidly shifting a system’s center of mass, as targets can be massive with possibly unknown or poorly known mass inertia properties. Grappling actions yield opportunities for a novel online calculation of the time-varying location of the combined system’s center of mass. Two-norm optimal nonlinear, projection regression-based learning is implemented and juxtaposed to a comparative benchmark both qualitatively and quantitatively supported by a comparison of enhancements of Luenberger observers. Analysis precedes modeling and simulation to verify the design, and then, spaceflight experiments are proposed for the sequel to validate the simulation results. Time-varying mass locations are discerned, and the time-varying location of the mass center is revealed to be 36–95 percent different than initially assumed, and 58–317 percent corrections to inertia identification are demonstrated. Combined three-dimensional maneuvers obscures identification compared to single-axis maneuvering.
- Open Access
- 20 March 2025
- Published by MDPI AG in Preprints.org
Autonomous Real–Time Mass Center Location and Inertia Identification for Grappling Space Robotics
Grappling actions by space robots for the purposes of stabilizing, refueling, repair, and equipment replacement necessitate autonomous abilities of a single grappling space robot to rapidly contend with large variations in total system inertia rapidly shifting system center of mass, as targets can be massive with possibly unknown or poorly known mass inertia properties. Proposing time–varying inertia identification yields opportunities for novel online calculation of time–varying location of the combined system’s center of mass. Two–norm optimal nonlinear, projection regression–based learning is implemented and juxtaposed to a comparative benchmark both qualitatively and quantitatively supported by a comparison of enhancements of Luenberger observers. Following analytical development, simulations are used to verify the design, and then spaceflight experiments are proposed for the sequel to validate the simulation results. Time–varying mass locations are discerned, and the time–varying location of the mass center is revealed to be 36–95 percent different than initially assumed, and 58–317 percent corrections to inertia identification is demonstrated. Combined three–dimensional maneuvers obscure identification compared to single–axis maneuvering.
- 20 March 2025
- Published by MDPI AG in Preprints.org
Open AccessAutonomous Real–Time Mass Center Location and Inertia Identification for Grappling Space Robotics
Grappling actions by space robots for the purposes of stabilizing, refueling, repair, and equipment replacement necessitate autonomous abilities of a single grappling space robot to rapidly contend with large variations in total system inertia rapidly shifting system center of mass, as targets can be massive with possibly unknown or poorly known mass inertia properties. Proposing time–varying inertia identification yields opportunities for novel online calculation of time–varying location of the combined system’s center of mass. Two–norm optimal nonlinear, projection regression–based learning is implemented and juxtaposed to a comparative benchmark both qualitatively and quantitatively supported by a comparison of enhancements of Luenberger observers. Following analytical development, simulations are used to verify the design, and then spaceflight experiments are proposed for the sequel to validate the simulation results. Time–varying mass locations are discerned, and the time–varying location of the mass center is revealed to be 36–95 percent different than initially assumed, and 58–317 percent corrections to inertia identification is demonstrated. Combined three–dimensional maneuvers obscure identification compared to single–axis maneuvering.
- Open Access
- 28 March 2024
- Published by MDPI AG in Micromachines
- Vol. 15 (4) , 455
Micro-Satellite Systems Design, Integration, and Flight
Within the past decade, the aerospace engineering industry has evolved beyond the constraints of using single, large, custom satellites. Due to the increased reliability and robustness of commercial, off-the-shelf printed circuit board components, missions have instead transitioned towards deploying swarms of smaller satellites. Such an approach significantly decreases the mission cost by reducing custom engineering and deployment expenses. Nanosatellites can be quickly developed with a more modular design at lower risk. The Alpha mission at the Cornell University Space Systems Studio is fabricated in this manner. However, for the purpose of development, the initial proof of concept included a two-satellite system. The manuscript will discuss system engineering approaches used to model and mature the design of the pilot satellite. The two systems that will be primarily focused on are the attitude control system of the carrier nanosatellite and the radio frequency communications on the excreted femto-satellites. Milestones achieved include ChipSat to ChipSat communication, ChipSat to ground station communication, packet creation, error correction, appending a preamble, and filtering the signal. Other achievements include controller traceability/verification and validation, software rigidity tests, hardware endurance testing, Kane damper, and inertial measurement unit tuning. These developments matured the technological readiness level (TRL) of systems in preparation for satellite deployment.
- 28 March 2024
- Published by MDPI AG in Micromachines
- Vol. 15 (4) , 455
Open AccessMicro-Satellite Systems Design, Integration, and Flight
Within the past decade, the aerospace engineering industry has evolved beyond the constraints of using single, large, custom satellites. Due to the increased reliability and robustness of commercial, off-the-shelf printed circuit board components, missions have instead transitioned towards deploying swarms of smaller satellites. Such an approach significantly decreases the mission cost by reducing custom engineering and deployment expenses. Nanosatellites can be quickly developed with a more modular design at lower risk. The Alpha mission at the Cornell University Space Systems Studio is fabricated in this manner. However, for the purpose of development, the initial proof of concept included a two-satellite system. The manuscript will discuss system engineering approaches used to model and mature the design of the pilot satellite. The two systems that will be primarily focused on are the attitude control system of the carrier nanosatellite and the radio frequency communications on the excreted femto-satellites. Milestones achieved include ChipSat to ChipSat communication, ChipSat to ground station communication, packet creation, error correction, appending a preamble, and filtering the signal. Other achievements include controller traceability/verification and validation, software rigidity tests, hardware endurance testing, Kane damper, and inertial measurement unit tuning. These developments matured the technological readiness level (TRL) of systems in preparation for satellite deployment.
- Open Access
- 12 February 2024
- Published by MDPI AG in Biomimetics
- Vol. 9 (2) , 108
Bio-Inspired Space Robotic Control Compared to Alternatives
Controlling robots in space with necessarily low material and structural stiffness is quite challenging at least in part due to the resulting very low structural resonant frequencies or natural vibration. The frequencies are sometimes so low that the very act of controlling the robot with medium or high bandwidth controllers leads to excitation of resonant vibrations in the robot appendages. Biomimetics or biomimicry emulates models, systems, and elements of nature for solving such complex problems. Recent seminal publications have re-introduced the viability of optimal command shaping, and one recent instantiation mimics baseball pitching to propose control of highly flexible space robots. The readership will find a perhaps dizzying array of thirteen decently performing alternatives in the literature but could be left bereft selecting a method(s) deemed to be best suited for a particular application. Bio-inspired control of space robotics is presented in a quite substantial (perhaps not comprehensive) comparison, and the conclusions of this study indicate the three top performing methods based on minimizing control effort (i.e., fuel) usage, tracking error mean, and tracking error deviation, where 96%, 119%, and 80% performance improvement, respectively, are achieved.
- 12 February 2024
- Published by MDPI AG in Biomimetics
- Vol. 9 (2) , 108
Open AccessBio-Inspired Space Robotic Control Compared to Alternatives
Controlling robots in space with necessarily low material and structural stiffness is quite challenging at least in part due to the resulting very low structural resonant frequencies or natural vibration. The frequencies are sometimes so low that the very act of controlling the robot with medium or high bandwidth controllers leads to excitation of resonant vibrations in the robot appendages. Biomimetics or biomimicry emulates models, systems, and elements of nature for solving such complex problems. Recent seminal publications have re-introduced the viability of optimal command shaping, and one recent instantiation mimics baseball pitching to propose control of highly flexible space robots. The readership will find a perhaps dizzying array of thirteen decently performing alternatives in the literature but could be left bereft selecting a method(s) deemed to be best suited for a particular application. Bio-inspired control of space robotics is presented in a quite substantial (perhaps not comprehensive) comparison, and the conclusions of this study indicate the three top performing methods based on minimizing control effort (i.e., fuel) usage, tracking error mean, and tracking error deviation, where 96%, 119%, and 80% performance improvement, respectively, are achieved.
- Open Access
Space Robot Sensor Noise Amelioration Using Trajectory Shaping
Robots in space are necessarily extremely light and lack structural stiffness resulting in natural frequencies of resonance so low as to reside inside the attitude controller’s bandwidth. A variety of input trajectories can be used to drive a controller’s attempt to ameliorate the control-structural interactions where feedback is provided by low-quality, noisy sensors. Traditionally, step functions are used as the ideal input trajectory. However, step functions are not ideal in many applications, as they are discontinuous. Alternative input trajectories are explored in this manuscript and applied to an example system that includes a flexible appendage attached to a rigid main body. The main body is controlled by a reaction wheel. The equations of motion of the flexible appendage, rigid body, and reaction wheel are derived. A benchmark feedback controller is developed to account for the rigid body modes. Additional filters are added to compensate for the system’s flexible modes. Sinusoidal trajectories are autonomously generated to feed the controller. Benchmark feedforward whiplash compensation is additionally implemented for comparison. The method without random errors with the smallest error is the sinusoidal trajectory method, which showed a 97.39% improvement when compared to the baseline response when step trajectories were commanded, while the sinusoidal method was inferior to traditional step trajectories when sensor noise and random errors were present.
Open AccessSpace Robot Sensor Noise Amelioration Using Trajectory Shaping
Robots in space are necessarily extremely light and lack structural stiffness resulting in natural frequencies of resonance so low as to reside inside the attitude controller’s bandwidth. A variety of input trajectories can be used to drive a controller’s attempt to ameliorate the control-structural interactions where feedback is provided by low-quality, noisy sensors. Traditionally, step functions are used as the ideal input trajectory. However, step functions are not ideal in many applications, as they are discontinuous. Alternative input trajectories are explored in this manuscript and applied to an example system that includes a flexible appendage attached to a rigid main body. The main body is controlled by a reaction wheel. The equations of motion of the flexible appendage, rigid body, and reaction wheel are derived. A benchmark feedback controller is developed to account for the rigid body modes. Additional filters are added to compensate for the system’s flexible modes. Sinusoidal trajectories are autonomously generated to feed the controller. Benchmark feedforward whiplash compensation is additionally implemented for comparison. The method without random errors with the smallest error is the sinusoidal trajectory method, which showed a 97.39% improvement when compared to the baseline response when step trajectories were commanded, while the sinusoidal method was inferior to traditional step trajectories when sensor noise and random errors were present.
- Open Access
- 3 January 2024
- Published by MDPI AG in Preprints.org
Bio–Inspired Space Robotics
Controlling robots in space with necessarily low material and structural stiffness is quite challenging at least in part due to the resulting very low structural resonant frequencies. The frequencies are sometimes so low, the vary act of controlling the robot with medium or high bandwidth controllers lead to excitation of resonant vibrations. Biomimetics or biomimicry emulates models, systems, and elements of nature for solving such complex problems. Recent seminal publications have re-introduced the viability of optimal command shaping, and one recent instantiation mimics baseball pitching to propose control of highly flexible space robots. The readership will find a perhaps dizzying array of thirteen decently performing alternatives in the literature but could be left bereft selecting a method(s) deemed to be best suited for a particular application. Bio–inspired control of space robotics is presented in a quite substantial (perhaps not comprehensive) comparison, and the conclusions of the study indicate the top three performing methods based on minimizing control effort (i.e., fuel) usage, tracking error mean, and tracking error deviation include.
- 3 January 2024
- Published by MDPI AG in Preprints.org
Open AccessBio–Inspired Space Robotics
Controlling robots in space with necessarily low material and structural stiffness is quite challenging at least in part due to the resulting very low structural resonant frequencies. The frequencies are sometimes so low, the vary act of controlling the robot with medium or high bandwidth controllers lead to excitation of resonant vibrations. Biomimetics or biomimicry emulates models, systems, and elements of nature for solving such complex problems. Recent seminal publications have re-introduced the viability of optimal command shaping, and one recent instantiation mimics baseball pitching to propose control of highly flexible space robots. The readership will find a perhaps dizzying array of thirteen decently performing alternatives in the literature but could be left bereft selecting a method(s) deemed to be best suited for a particular application. Bio–inspired control of space robotics is presented in a quite substantial (perhaps not comprehensive) comparison, and the conclusions of the study indicate the top three performing methods based on minimizing control effort (i.e., fuel) usage, tracking error mean, and tracking error deviation include.
- Open Access
Bilinear Interpolation of Three–Dimensional Gain–Scheduled Autopilots
Gain-scheduled autopilots have emerged as a dominant strategy to achieve adaptive control of coupled, non-linear engineering complexities, owing to an ability to adapt to changing operational conditions and uncertainties. This study focuses on utilizing bilinear interpolation of gain-scheduled autopilots, emphasizing enhanced system performance and robustness. Through a comprehensive investigation and comparative analysis using three disparate cases, advantages over conventional methods are revealed. Strengths and weaknesses of both simple and specialized variants (such as linear, and real-time gain-scheduling) are introduced. Three missile guidance case–studies utilize simulation time and miss distance figures of merit. Comparing the performance of bilinear interpolation and automatic instantiations to index–search, over comparable traveled distances, missile miss distances were improved 179% and 196% respectively with slightly improved computational burden.
Open AccessBilinear Interpolation of Three–Dimensional Gain–Scheduled Autopilots
Gain-scheduled autopilots have emerged as a dominant strategy to achieve adaptive control of coupled, non-linear engineering complexities, owing to an ability to adapt to changing operational conditions and uncertainties. This study focuses on utilizing bilinear interpolation of gain-scheduled autopilots, emphasizing enhanced system performance and robustness. Through a comprehensive investigation and comparative analysis using three disparate cases, advantages over conventional methods are revealed. Strengths and weaknesses of both simple and specialized variants (such as linear, and real-time gain-scheduling) are introduced. Three missile guidance case–studies utilize simulation time and miss distance figures of merit. Comparing the performance of bilinear interpolation and automatic instantiations to index–search, over comparable traveled distances, missile miss distances were improved 179% and 196% respectively with slightly improved computational burden.