Zhenhua Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zhenhua Zhang has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
Xing Jin
2 shared publicationsXiuFeng HUANG
2 shared publicationsXiufeng Huang
2 shared publicationsBangYi HAN
1 shared publication- Bangyi Han
College of Naval Architecture and Ocean, Naval University of Engineering, Wuhan 430033, China
1 shared publication BaoChong REN
1 shared publication
Latest Publications
- Open Access
- 21 August 2026
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 14 (16) , 1548
Circumferential Response Differences and Plastic Deformation Mechanisms of Ring-Stiffened Cylindrical Shells Subjected to Underwater Explosion Shock Waves
Ring-stiffened cylindrical shells are widely used as load-bearing components in submarine pressure-hull sections. Existing underwater explosion studies have mainly emphasized incident-face denting or global failure, leaving unresolved how circumferential shock-wave diffraction and internal structural load transfer produce different response sequences and plastic-strain accumulation at the incident, side, and rear faces. A mechanism-oriented underwater explosion model test was conducted using a 44 g TNT charge at a stand-off distance of 0.50 m, and a fluid–structure interaction model was established in MSC.Dytran using the general coupling method. The model incorporated the Cowper–Symonds strain-rate effect of 16MnR steel and was validated against the Cole empirical peak pressure and measured incident-face residual deformations. The calculated free-field peak pressure was 35.50 MPa, with an error of 0.65%, while the mean relative error of the six residual-deformation measurements was 13.50%. The shell plating between adjacent ring stiffeners exhibited higher velocity and acceleration peaks than the stiffeners, indicating the local constraint imposed by the ring stiffeners. The side-face nodes showed symmetric transverse expansion, and the corresponding elements exhibited no discernible equivalent plastic strain. The rear-face center displayed a delayed axial response, and its representative element reached a final equivalent plastic strain of approximately , compared with for the incident-face element. These results identify distinct circumferential response modes and show that macroscopic motion amplitude is not simply correlated with local plastic deformation.- 21 August 2026
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 14 (16) , 1548
Open AccessCircumferential Response Differences and Plastic Deformation Mechanisms of Ring-Stiffened Cylindrical Shells Subjected to Underwater Explosion Shock Waves
Ring-stiffened cylindrical shells are widely used as load-bearing components in submarine pressure-hull sections. Existing underwater explosion studies have mainly emphasized incident-face denting or global failure, leaving unresolved how circumferential shock-wave diffraction and internal structural load transfer produce different response sequences and plastic-strain accumulation at the incident, side, and rear faces. A mechanism-oriented underwater explosion model test was conducted using a 44 g TNT charge at a stand-off distance of 0.50 m, and a fluid–structure interaction model was established in MSC.Dytran using the general coupling method. The model incorporated the Cowper–Symonds strain-rate effect of 16MnR steel and was validated against the Cole empirical peak pressure and measured incident-face residual deformations. The calculated free-field peak pressure was 35.50 MPa, with an error of 0.65%, while the mean relative error of the six residual-deformation measurements was 13.50%. The shell plating between adjacent ring stiffeners exhibited higher velocity and acceleration peaks than the stiffeners, indicating the local constraint imposed by the ring stiffeners. The side-face nodes showed symmetric transverse expansion, and the corresponding elements exhibited no discernible equivalent plastic strain. The rear-face center displayed a delayed axial response, and its representative element reached a final equivalent plastic strain of approximately , compared with for the incident-face element. These results identify distinct circumferential response modes and show that macroscopic motion amplitude is not simply correlated with local plastic deformation. - Open Access
- 1 February 2026
- Published by Tsinghua University Press in Physics and Engineering
- Vol. 36 (1) , 206-211
EXPLORATION OF VISUAL TEACHING REFORM IN SHIP VIBRATION BASED ON MATHEMATICA SOFTWARE
Ship Vibration, as a compulsory course for undergraduate students majoring in Naval Architecture and Ocean Engineering, is highly theoretical and difficult. How to improve the teaching effectiveness of the course is an important practical problem that troubles the teaching team. This article is based on Mathematica mathematical software and explores the development of multiple vibration knowledge teaching demonstration cases, which have a high degree of visualization and can be used for classroom demonstrations as well as for students to self-study after class. After visualizing and programming the key and difficult knowledge of vibration one by one, students can intuitively experience vibration phenomena and understand the essence of vibration problems. This not only stimulates students' interest but also enriches teaching resources, while overcoming the drawbacks of traditional experimental teaching that cannot conduct vibration experiments without the laboratory.
- 1 February 2026
- Published by Tsinghua University Press in Physics and Engineering
- Vol. 36 (1) , 206-211
Open AccessEXPLORATION OF VISUAL TEACHING REFORM IN SHIP VIBRATION BASED ON MATHEMATICA SOFTWARE
Ship Vibration, as a compulsory course for undergraduate students majoring in Naval Architecture and Ocean Engineering, is highly theoretical and difficult. How to improve the teaching effectiveness of the course is an important practical problem that troubles the teaching team. This article is based on Mathematica mathematical software and explores the development of multiple vibration knowledge teaching demonstration cases, which have a high degree of visualization and can be used for classroom demonstrations as well as for students to self-study after class. After visualizing and programming the key and difficult knowledge of vibration one by one, students can intuitively experience vibration phenomena and understand the essence of vibration problems. This not only stimulates students' interest but also enriches teaching resources, while overcoming the drawbacks of traditional experimental teaching that cannot conduct vibration experiments without the laboratory.
- 21 August 2023
- Published by Elsevier in Composite Structures
- Vol. 323
Experimental study on the impact response of the polyurea-coated 3D auxetic lattice sandwich panels subjected to air explosion
- 21 August 2023
- Published by Elsevier in Composite Structures
- Vol. 323
Experimental study on the impact response of the polyurea-coated 3D auxetic lattice sandwich panels subjected to air explosion
- Open Access
Regulation Mechanism of the Shock Waves in a Pentamode Lattice-Ring Structure Subjected to Collision
This paper hopes to explore the application potential of pentamode materials in the field of shock protection. Hammer percussion tests revealed that the peak strain of the inner-ring front shock surface of the pentamode lattice-ring structure is 103.9% of that of the inner-ring rear shock surface. According to the simulation results, for a solid ring of equal mass made of the same base material, the ratio mentioned above reaches 3385.7%. Compared with the solid ring of equal mass made of the same base material, the pentamode lattice-ring structure saw a decline of 65.5% in the peak strain of its inner-ring front shock surface. The distribution laws of the group velocity characterizing energy-flow characteristics were discovered by calculating cell dispersion curves in various layers of the pentamode lattice-ring structure. The laws governing the effects of cellular structure parameters on group velocity anisotropy and pentamode characteristic parameters were also revealed. It was found that the deflection angle of the energy-flow vector is positively correlated with group velocity anisotropy and that the effects of pentamode characteristic parameters π and μ on the deflection angle of the energy-flow vector vary greatly in different value ranges. The deflection angle of the energy-flow vector has a decisive effect on the protection performance of the pentamode lattice-ring structure. The conclusions of this study can provide some theoretical support for the shock protection of submarine structures.
Open AccessRegulation Mechanism of the Shock Waves in a Pentamode Lattice-Ring Structure Subjected to Collision
This paper hopes to explore the application potential of pentamode materials in the field of shock protection. Hammer percussion tests revealed that the peak strain of the inner-ring front shock surface of the pentamode lattice-ring structure is 103.9% of that of the inner-ring rear shock surface. According to the simulation results, for a solid ring of equal mass made of the same base material, the ratio mentioned above reaches 3385.7%. Compared with the solid ring of equal mass made of the same base material, the pentamode lattice-ring structure saw a decline of 65.5% in the peak strain of its inner-ring front shock surface. The distribution laws of the group velocity characterizing energy-flow characteristics were discovered by calculating cell dispersion curves in various layers of the pentamode lattice-ring structure. The laws governing the effects of cellular structure parameters on group velocity anisotropy and pentamode characteristic parameters were also revealed. It was found that the deflection angle of the energy-flow vector is positively correlated with group velocity anisotropy and that the effects of pentamode characteristic parameters π and μ on the deflection angle of the energy-flow vector vary greatly in different value ranges. The deflection angle of the energy-flow vector has a decisive effect on the protection performance of the pentamode lattice-ring structure. The conclusions of this study can provide some theoretical support for the shock protection of submarine structures.
- Open Access
Study on the Bandgap Characteristics and Vibration-Reduction Mechanism of Symmetric Power-Exponent Prismatic Phononic Crystal Plates
In this paper, a symmetric power-exponent prismatic phononic crystal configuration was proposed for the vibration reduction of thin plate structures, and the mechanism of bandgap generation and the influencing factors of the band gaps were analyzed. The results showed that the proposed symmetric power-exponent prismatic phononic crystal structure has three complete band gaps of bending waves, where the width of the second band gap can go up to 1639 Hz. The band gaps of bending waves of the phononic crystal were verified using a combination of numerical simulations and experimental methods, and subsequently, the bandgap characteristics and energy-focusing effect of the phononic crystals were effectively used to suppress the bending vibration of the thin plate. With the increase in prismoid height of the structure, the width of the first band gap expanded, while the bandwidths of the other two band gaps narrowed down. It was observed that an increase in the power of the power-exponent prismoid would reduce the starting and ending frequencies of the band gaps, whereas an increase in the prismoid edge thickness would weaken the energy-focusing effect and narrow the band gaps gradually. Our research results provide a new technique and a pathway to realize vibration reduction in thin plate structures.
Open AccessStudy on the Bandgap Characteristics and Vibration-Reduction Mechanism of Symmetric Power-Exponent Prismatic Phononic Crystal Plates
In this paper, a symmetric power-exponent prismatic phononic crystal configuration was proposed for the vibration reduction of thin plate structures, and the mechanism of bandgap generation and the influencing factors of the band gaps were analyzed. The results showed that the proposed symmetric power-exponent prismatic phononic crystal structure has three complete band gaps of bending waves, where the width of the second band gap can go up to 1639 Hz. The band gaps of bending waves of the phononic crystal were verified using a combination of numerical simulations and experimental methods, and subsequently, the bandgap characteristics and energy-focusing effect of the phononic crystals were effectively used to suppress the bending vibration of the thin plate. With the increase in prismoid height of the structure, the width of the first band gap expanded, while the bandwidths of the other two band gaps narrowed down. It was observed that an increase in the power of the power-exponent prismoid would reduce the starting and ending frequencies of the band gaps, whereas an increase in the prismoid edge thickness would weaken the energy-focusing effect and narrow the band gaps gradually. Our research results provide a new technique and a pathway to realize vibration reduction in thin plate structures.
- Retracted
- 22 June 2022
- Published by Springer Nature in International Journal on Interactive Design and Manufacturing (IJIDeM)
- Vol. 20 (S1) , 1-11
RETRACTED ARTICLE: Study on mechanical properties of negative Poisson's ratio lattice single-cell structure under compressive loading
- 22 June 2022
- Published by Springer Nature in International Journal on Interactive Design and Manufacturing (IJIDeM)
- Vol. 20 (S1) , 1-11
RetractedRETRACTED ARTICLE: Study on mechanical properties of negative Poisson's ratio lattice single-cell structure under compressive loading
- 23 May 2022
- Published by Elsevier in Marine Structures
- Vol. 85
Study on the energy dissipation mechanism of the pyramidal lattice sandwich panel subjected to underwater explosion
- 23 May 2022
- Published by Elsevier in Marine Structures
- Vol. 85
Study on the energy dissipation mechanism of the pyramidal lattice sandwich panel subjected to underwater explosion
- 15 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 408-413
Online Inverse Identification of Noncooperative Dynamic Games
In this paper, the inverse optimization problem of discrete-time noncooperative dynamic games is investigated, where the cost functions of the dynamic games are required to be recovered based on the observation of open-loop Nash equilibrium trajectories. The solution to this problem allows the generation of a model to infer the interconnection pattern of a network system consisting of many dynamic agents. The inverse optimization problem (or the recovery of the cost functions) is solved by an online method which is derived from the necessary conditions of Nash equilibria. The proposed online calculation method can handle either finite or infinite-horizon problems, and the state and control input data are processed recursively. The performance of the proposed method is illustrated through numerical examples.
- 15 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 408-413
Online Inverse Identification of Noncooperative Dynamic Games
In this paper, the inverse optimization problem of discrete-time noncooperative dynamic games is investigated, where the cost functions of the dynamic games are required to be recovered based on the observation of open-loop Nash equilibrium trajectories. The solution to this problem allows the generation of a model to infer the interconnection pattern of a network system consisting of many dynamic agents. The inverse optimization problem (or the recovery of the cost functions) is solved by an online method which is derived from the necessary conditions of Nash equilibria. The proposed online calculation method can handle either finite or infinite-horizon problems, and the state and control input data are processed recursively. The performance of the proposed method is illustrated through numerical examples.
- 1 July 2021
- Published by Science China Press., Co. Ltd. in SCIENTIA SINICA Physica, Mechanica & Astronomica
- Vol. 51 (12)
舰艇抗爆抗冲击专题·编者按
舰艇的抗爆抗冲击能力是衡量其作战性能的重要指标,《中国科学:物理学 力学 天文学》特别组织“舰艇抗爆抗冲击专题”,邀请了长期致力于舰艇抗爆抗冲击研究的科研工作者撰写了14篇相关论文,其中4篇为综述论文,展现了本领域国内外最新的研究进展;其他10篇为研究论文,涵盖了爆炸载荷、舰艇结构、机械设备和人员等方面的抗爆抗冲击研究。本专题较为全面的反映了我国舰艇抗爆抗冲击领域的研究状况和进展。希望专题的内容能为相关领域的研究人员提供有益的帮助,并在一定程度上推动舰艇抗爆抗冲击领域的发展。
- 1 July 2021
- Published by Science China Press., Co. Ltd. in SCIENTIA SINICA Physica, Mechanica & Astronomica
- Vol. 51 (12)
舰艇抗爆抗冲击专题·编者按
舰艇的抗爆抗冲击能力是衡量其作战性能的重要指标,《中国科学:物理学 力学 天文学》特别组织“舰艇抗爆抗冲击专题”,邀请了长期致力于舰艇抗爆抗冲击研究的科研工作者撰写了14篇相关论文,其中4篇为综述论文,展现了本领域国内外最新的研究进展;其他10篇为研究论文,涵盖了爆炸载荷、舰艇结构、机械设备和人员等方面的抗爆抗冲击研究。本专题较为全面的反映了我国舰艇抗爆抗冲击领域的研究状况和进展。希望专题的内容能为相关领域的研究人员提供有益的帮助,并在一定程度上推动舰艇抗爆抗冲击领域的发展。
- 21 June 2021
- Published by Science China Press., Co. Ltd. in SCIENTIA SINICA Physica, Mechanica & Astronomica
- Vol. 51 (12) , 124606
The protective mechanism of pyramid lattice on submarine subjected to undex
- 21 June 2021
- Published by Science China Press., Co. Ltd. in SCIENTIA SINICA Physica, Mechanica & Astronomica
- Vol. 51 (12) , 124606
The protective mechanism of pyramid lattice on submarine subjected to undex