Claudia Veronica Ungureanu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Claudia Veronica Ungureanu has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
- Gabriela Elena Bahrim
Faculty of Food Science and Engineering, Dunărea de Jos University of Galati, 111 Domnească Street, 800201 Galati, Romania
5 shared publications - Lidia Favier
UMR 6226, ISCR (Institut des Sciences Chimiques de Rennes), CNRS, École Nationale Supérieure de Chimie de Rennes, Université Rennes, F-35000 Rennes, France
4 shared publications Adrian Cîrciumaru
“Dunarea de Jos” University of Galati, Research and Development Centre for Thermoset Matrix Composites, Cross-Border Faculty, Romania
2 shared publications- Dumitra Raducanu
Department of Biology, Faculty of Science, “Vasile Alecsandri” University of Bacau, 157 Calea Marasesti Street, 600115 Bacau, Romania
2 shared publications Vasile Bria
“Dunarea de Jos” University of Galati, Research and Development Centre for Thermoset Matrix Composites, Cross-Border Faculty, Romania
2 shared publicationsAbdeltif Amrane
Ecole Nationale Supérieure de Chimie de Rennes, CNRS, UMR 6226, France; Université Européenne de Bretagne, 11 Allée de Beaulieu CS 50837, 35708 Rennes Cedex 7, France
1 shared publication
Latest Publications
- Open Access
- 9 September 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (18) , 9274
Waste Valorisation in Floating Aquaculture Systems: Environmental Biotechnology Pathways and Engineering Integration for Circular Resource Recovery
The rapid expansion of aquaculture has led to a substantial increase in the generation of organic waste, nutrient-rich effluents, and residual biomass, creating significant environmental challenges while simultaneously providing opportunities for resource recovery within the circular bioeconomy. Environmental biotechnology offers a broad range of solutions for transforming these waste streams into valuable products, including renewable energy, fertilisers, biochar, microbial biomass, and other bio-based resources. However, the practical implementation of these technologies in floating aquaculture systems remains fragmented due to the lack of integrated engineering approaches. This review critically analyses the current state-of-the-art in environmental biotechnology pathways for aquaculture waste valorisation, covering biological, physicochemical, and thermochemical technologies applicable to floating production systems. The assessment covers anaerobic digestion, composting, insect bioconversion, microalgae cultivation, integrated multi-trophic aquaculture, nutrient recovery, hydrothermal carbonisation, and pyrolysis, together with their technological maturity, offshore applicability, and contribution to circular resource recovery. Beyond reviewing existing technologies, this paper proposes the “Circular Floating Aquaculture Systems Engineering Integration Framework” (CFAS-EIF), a systems engineering concept that integrates floating production infrastructure, waste collection, resource recovery technologies, digital management, and circular value chains into a unified architecture. The framework illustrates how environmental biotechnology can be implemented through coordinated engineering integration, enabling the transition from waste management to resource valorisation in offshore aquaculture. The proposed framework provides researchers, engineers, and industry stakeholders with a comprehensive reference for designing next-generation aquaculture platforms that support sustainable resource management, climate change mitigation, and a circular bioeconomy.
- 9 September 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (18) , 9274
Open AccessWaste Valorisation in Floating Aquaculture Systems: Environmental Biotechnology Pathways and Engineering Integration for Circular Resource Recovery
The rapid expansion of aquaculture has led to a substantial increase in the generation of organic waste, nutrient-rich effluents, and residual biomass, creating significant environmental challenges while simultaneously providing opportunities for resource recovery within the circular bioeconomy. Environmental biotechnology offers a broad range of solutions for transforming these waste streams into valuable products, including renewable energy, fertilisers, biochar, microbial biomass, and other bio-based resources. However, the practical implementation of these technologies in floating aquaculture systems remains fragmented due to the lack of integrated engineering approaches. This review critically analyses the current state-of-the-art in environmental biotechnology pathways for aquaculture waste valorisation, covering biological, physicochemical, and thermochemical technologies applicable to floating production systems. The assessment covers anaerobic digestion, composting, insect bioconversion, microalgae cultivation, integrated multi-trophic aquaculture, nutrient recovery, hydrothermal carbonisation, and pyrolysis, together with their technological maturity, offshore applicability, and contribution to circular resource recovery. Beyond reviewing existing technologies, this paper proposes the “Circular Floating Aquaculture Systems Engineering Integration Framework” (CFAS-EIF), a systems engineering concept that integrates floating production infrastructure, waste collection, resource recovery technologies, digital management, and circular value chains into a unified architecture. The framework illustrates how environmental biotechnology can be implemented through coordinated engineering integration, enabling the transition from waste management to resource valorisation in offshore aquaculture. The proposed framework provides researchers, engineers, and industry stakeholders with a comprehensive reference for designing next-generation aquaculture platforms that support sustainable resource management, climate change mitigation, and a circular bioeconomy.
- Open Access
Evaluation of Antibacterial Substances Through a 32 Factorial Design for the Treatment of Poultry Slaughterhouse Wastewater
Poultry farming is important from a food point of view, as it provides products for the population. Waste resulting from poultry farming and processing is environmentally sensitive, which is why treatment technologies are crucial for sustainability. Conventional pre-treated wastewater originating from the poultry sector, combined with innovative methods of using substances with antimicrobial effects constitute another approach to eliminating health risks. This research aimed to evaluate the behavior of bacterial strains isolated from water samples treated by reverse osmosis (RO), ultrafiltration (UF), and ultraviolet disinfection (UV). To choose our antimicrobial substances, we surveyed the population using the Google Forms platform and the official questionnaire. Using a factorial design, the concentration of antibiotic or antiseptic, as well as the duration of their action on bacterial strains isolated in pure culture, was varied. The optical densities of bacterial cultures reflect the efficiency of treatments with antibacterial or antiseptic substances. Factorial design, corroborating the experimental results, led to the following: 4.84 mg·L−1 antibiotic for 7.6 h and 4.23 mg·L−1 chloramine for 16.23 h. The results obtained from mathematical modeling correspond to a decrease in the bacterial population. In perspective, combining purification technologies with antimicrobial substances, adapted to the volume of water through mathematical modeling, will reduce the risk of microbiological contamination, with bacterial recovery rate values ranging between 0.58 and 1.21 in the case of antiseptic using, and between 0.60 and 0.92 in the case of antibiotic using.
Open AccessEvaluation of Antibacterial Substances Through a 32 Factorial Design for the Treatment of Poultry Slaughterhouse Wastewater
Poultry farming is important from a food point of view, as it provides products for the population. Waste resulting from poultry farming and processing is environmentally sensitive, which is why treatment technologies are crucial for sustainability. Conventional pre-treated wastewater originating from the poultry sector, combined with innovative methods of using substances with antimicrobial effects constitute another approach to eliminating health risks. This research aimed to evaluate the behavior of bacterial strains isolated from water samples treated by reverse osmosis (RO), ultrafiltration (UF), and ultraviolet disinfection (UV). To choose our antimicrobial substances, we surveyed the population using the Google Forms platform and the official questionnaire. Using a factorial design, the concentration of antibiotic or antiseptic, as well as the duration of their action on bacterial strains isolated in pure culture, was varied. The optical densities of bacterial cultures reflect the efficiency of treatments with antibacterial or antiseptic substances. Factorial design, corroborating the experimental results, led to the following: 4.84 mg·L−1 antibiotic for 7.6 h and 4.23 mg·L−1 chloramine for 16.23 h. The results obtained from mathematical modeling correspond to a decrease in the bacterial population. In perspective, combining purification technologies with antimicrobial substances, adapted to the volume of water through mathematical modeling, will reduce the risk of microbiological contamination, with bacterial recovery rate values ranging between 0.58 and 1.21 in the case of antiseptic using, and between 0.60 and 0.92 in the case of antibiotic using.
- Open Access
- 12 November 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (22) , 10103
Valorization of Pumpkin Seed Flour in Biscuit Production: Nutritional Enhancement and Sensory Acceptability
In the context of increasing interest in healthy and sustainable nutrition, the food industry is challenged to develop innovative products that combine high nutritional quality with consumer acceptance. This study evaluated the potential of pumpkin seed flour (PSF) as a natural ingredient in biscuit formulations. PSF was analyzed for its proximate composition, and biscuits were formulated by replacing rice flour with various concentrations of 10%, 20%, and 30%. The products were analyzed for moisture, protein, fat, fiber, and ash content, subjected to microbiological testing, and evaluated sensorially using a 9-point hedonic scale. Results showed that PSF incorporation in biscuits significantly increased protein content from 6.20% in the control to 9.80% and fiber content from 2.10% to 5.90% in the formulation containing 30% PSF. Lipid content also increased proportionally with PSF addition. All samples complied with microbiological safety standards, and sensory evaluation indicated that biscuits with 10 and 20% PSF achieved the highest acceptability, particularly in terms of taste and texture. Overall, the use of PSF improves the nutritional density of biscuits, enhances their nutritional value, and supports sustainable food production by valorizing underutilized plant resources, in alignment with the United Nations Sustainable Development Goals.
- 12 November 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (22) , 10103
Open AccessValorization of Pumpkin Seed Flour in Biscuit Production: Nutritional Enhancement and Sensory Acceptability
In the context of increasing interest in healthy and sustainable nutrition, the food industry is challenged to develop innovative products that combine high nutritional quality with consumer acceptance. This study evaluated the potential of pumpkin seed flour (PSF) as a natural ingredient in biscuit formulations. PSF was analyzed for its proximate composition, and biscuits were formulated by replacing rice flour with various concentrations of 10%, 20%, and 30%. The products were analyzed for moisture, protein, fat, fiber, and ash content, subjected to microbiological testing, and evaluated sensorially using a 9-point hedonic scale. Results showed that PSF incorporation in biscuits significantly increased protein content from 6.20% in the control to 9.80% and fiber content from 2.10% to 5.90% in the formulation containing 30% PSF. Lipid content also increased proportionally with PSF addition. All samples complied with microbiological safety standards, and sensory evaluation indicated that biscuits with 10 and 20% PSF achieved the highest acceptability, particularly in terms of taste and texture. Overall, the use of PSF improves the nutritional density of biscuits, enhances their nutritional value, and supports sustainable food production by valorizing underutilized plant resources, in alignment with the United Nations Sustainable Development Goals.
- Open Access
- 1 January 2023
- Published by Walter de Gruyter GmbH in Green Processing and Synthesis
- Vol. 12 (1)
Green “one-pot” fluorescent bis-indolizine synthesis with whole-cell plant biocatalysis
An efficient one-pot route leading to bis-indolizine symmetric compounds has been developed via a new approach from the dipyridinium heterocyclic compound, reactive halogenated derivative, and activated alkyne through biocatalysis. A set of local plants was evaluated for its catalytic potential in “one-pot” biocatalysis of these valuable fluorescent compound synthesis reactions. Most of these biocatalysts containing enzymes from the oxidoreductase class (peroxidase: 0.56–1.08 mmol purpurogallin‧g −1 fresh weight‧min −1 , polyphenol oxidase (PPO) : 27.19–48.95 PPO units‧mg tissue −1 , CAT: 3.27–21.71 µmol O 2 ‧g −1 fresh weight‧min −1 ), were used as green catalysts in the multi-component cycloaddition reaction, in an aqueous buffer solution, for the production of bis-indolizine compounds in moderate to excellent yields (45–85%). The horseradish root ( Armoracia rusticana ) has been selected as the most promising biocatalyst source among the evaluated plants, and the obtained yields were greater than in the conventional synthesis method. The structures of indolizine derivatives were confirmed by nuclear magnetic resonance spectra, elemental analyses, as well as Fourier transform-infrared spectra. The cytotoxicity of the latter obtained indolizine compounds on the growth of the model microorganism, Saccharomyces cerevisiae MIUG 3.6 yeast strain, was also evaluated. Various parameters (number of generations, growth rate, generation time, dry matter yield, the degree of the budding yeast cells, and the degree of yeast autolysis, fermentation intensity), which describe the yeast growth, suggest that the nutrient broth supplemented with different concentrations of bis-indolizine compounds (10 and 1 µM) had no toxic effect on the yeast strain growth, under submerged cultivation conditions.
- 1 January 2023
- Published by Walter de Gruyter GmbH in Green Processing and Synthesis
- Vol. 12 (1)
Open AccessGreen “one-pot” fluorescent bis-indolizine synthesis with whole-cell plant biocatalysis
An efficient one-pot route leading to bis-indolizine symmetric compounds has been developed via a new approach from the dipyridinium heterocyclic compound, reactive halogenated derivative, and activated alkyne through biocatalysis. A set of local plants was evaluated for its catalytic potential in “one-pot” biocatalysis of these valuable fluorescent compound synthesis reactions. Most of these biocatalysts containing enzymes from the oxidoreductase class (peroxidase: 0.56–1.08 mmol purpurogallin‧g −1 fresh weight‧min −1 , polyphenol oxidase (PPO) : 27.19–48.95 PPO units‧mg tissue −1 , CAT: 3.27–21.71 µmol O 2 ‧g −1 fresh weight‧min −1 ), were used as green catalysts in the multi-component cycloaddition reaction, in an aqueous buffer solution, for the production of bis-indolizine compounds in moderate to excellent yields (45–85%). The horseradish root ( Armoracia rusticana ) has been selected as the most promising biocatalyst source among the evaluated plants, and the obtained yields were greater than in the conventional synthesis method. The structures of indolizine derivatives were confirmed by nuclear magnetic resonance spectra, elemental analyses, as well as Fourier transform-infrared spectra. The cytotoxicity of the latter obtained indolizine compounds on the growth of the model microorganism, Saccharomyces cerevisiae MIUG 3.6 yeast strain, was also evaluated. Various parameters (number of generations, growth rate, generation time, dry matter yield, the degree of the budding yeast cells, and the degree of yeast autolysis, fermentation intensity), which describe the yeast growth, suggest that the nutrient broth supplemented with different concentrations of bis-indolizine compounds (10 and 1 µM) had no toxic effect on the yeast strain growth, under submerged cultivation conditions.
- 24 May 2022
- Published by Springer Nature
- p. 35-54
Biopolymers: Global Carbon Footprint and Climate Change
- 24 May 2022
- Published by Springer Nature
- p. 35-54
Biopolymers: Global Carbon Footprint and Climate Change
- Open Access
- 15 March 2022
- Published by Universitatea Dunarea de Jos din Galati in The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science
- Vol. 45 (1) , 46-52
Studies on Epoxy Resin Modified with Organic Agents
Epoxy composites are one of the most versatile thermosetting polymers widely used due to their strong soldering resistance, high insulation, and thermal resistance. A wide range of raw materials can be used for the preparation of epoxy resins, thus offering a variety of resins with highly controllable performance characteristics. Essentially, epoxy resins are low molecular weight liquids with two or more epoxide functional groups. To get superior properties of the composite material, a broad variety of inorganic and organic modification agents are used. For this study, two protein substances, gelatin, and wheat gluten were used to change the basic properties of three types of epoxy resins. The specific heat of modified epoxy resin materials was performed by using Differential Scanning Calorimetry (DSC) instrument. The thermal analysis was developed on two heatingcooling cycles and the specific heat was evaluated for each segment of the cycle analysis. Also, the mechanical behavior of organic modified polymers subjected to compression was studied using INSTRON compressive testing machine.
- 15 March 2022
- Published by Universitatea Dunarea de Jos din Galati in The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science
- Vol. 45 (1) , 46-52
Open AccessStudies on Epoxy Resin Modified with Organic Agents
Epoxy composites are one of the most versatile thermosetting polymers widely used due to their strong soldering resistance, high insulation, and thermal resistance. A wide range of raw materials can be used for the preparation of epoxy resins, thus offering a variety of resins with highly controllable performance characteristics. Essentially, epoxy resins are low molecular weight liquids with two or more epoxide functional groups. To get superior properties of the composite material, a broad variety of inorganic and organic modification agents are used. For this study, two protein substances, gelatin, and wheat gluten were used to change the basic properties of three types of epoxy resins. The specific heat of modified epoxy resin materials was performed by using Differential Scanning Calorimetry (DSC) instrument. The thermal analysis was developed on two heatingcooling cycles and the specific heat was evaluated for each segment of the cycle analysis. Also, the mechanical behavior of organic modified polymers subjected to compression was studied using INSTRON compressive testing machine.
- 17 October 2020
- Published by Wiley in Journal of the Science of Food and Agriculture
- Vol. 101 (7) , 2676-2686
Polymers and protein‐associated vesicles for the microencapsulation of anthocyanins from grape skins used for food applications
BACKGROUND: Anthocyanins were extracted from grape skins by a combination of ethanolic‐ultrasonic assisted methods and were then encapsulated by freeze‐drying in soy phosphatidylcholine vesicles with the addition of different polymers, such as pectin, acacia gum, and whey protein isolate. The goal of this research was to microencapsulate anthocyanin compounds extracted from grape skins, to characterize the stability and behavior of the vesicles and then to use them to obtain a new light formulated mayonnaise.RESULTS: The particle size ranged from 900 nm in the control condition to 250 nm in vesicles loaded with whey proteins. The powders showed higher encapsulation efficiency for all variants, ranging from 81 to 96%. Vibrational spectroscopy revealed better inclusion of anthocyanins in polysaccharide‐based coacervates, whereas in protein‐based coacervates a possible interaction of anthocyanins with amine groups was observed. The vesicles were tested for in vitro release, and the results confirmed the gradual release of the anthocyanins in both stages of digestion, with a residual content of about 50% in the vesicles. The powders displayed high stability during storage in the dark at 4 °C. The panelists appreciated the new light formulated mayonnaises enriched with 10% dried vesicles compared with the control sample, in particular samples with acacia gum.CONCLUSION: The study revealed that polymer‐loaded vesicles presented stability in simulated gastrointestinal fluids and have proved successful in obtaining new light enriched mayonnaises. © 2020 Society of Chemical Industry
- 17 October 2020
- Published by Wiley in Journal of the Science of Food and Agriculture
- Vol. 101 (7) , 2676-2686
Polymers and protein‐associated vesicles for the microencapsulation of anthocyanins from grape skins used for food applications
BACKGROUND: Anthocyanins were extracted from grape skins by a combination of ethanolic‐ultrasonic assisted methods and were then encapsulated by freeze‐drying in soy phosphatidylcholine vesicles with the addition of different polymers, such as pectin, acacia gum, and whey protein isolate. The goal of this research was to microencapsulate anthocyanin compounds extracted from grape skins, to characterize the stability and behavior of the vesicles and then to use them to obtain a new light formulated mayonnaise.RESULTS: The particle size ranged from 900 nm in the control condition to 250 nm in vesicles loaded with whey proteins. The powders showed higher encapsulation efficiency for all variants, ranging from 81 to 96%. Vibrational spectroscopy revealed better inclusion of anthocyanins in polysaccharide‐based coacervates, whereas in protein‐based coacervates a possible interaction of anthocyanins with amine groups was observed. The vesicles were tested for in vitro release, and the results confirmed the gradual release of the anthocyanins in both stages of digestion, with a residual content of about 50% in the vesicles. The powders displayed high stability during storage in the dark at 4 °C. The panelists appreciated the new light formulated mayonnaises enriched with 10% dried vesicles compared with the control sample, in particular samples with acacia gum.CONCLUSION: The study revealed that polymer‐loaded vesicles presented stability in simulated gastrointestinal fluids and have proved successful in obtaining new light enriched mayonnaises. © 2020 Society of Chemical Industry
- Open Access
- 15 September 2020
- Published by Universitatea Dunarea de Jos din Galati in The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science
- Vol. 43 (3) , 10-14
The Mechanical Properties of Organic Modified Epoxy Resin
Epoxy resins have been presenting a lot of scientific and technical interests and organic modified epoxy resins have recently receiving a great deal of attention. For obtaining the composite materials with good mechanical proprieties, a large variety of organic modification agents were used. For this study gluten and gelatin had been used as modifying agents thinking that their dispersion inside the polymer could increase the polymer biocompatibility. Equal amounts of the proteins were milled together and the obtained compound was used to form 1 to 5% weight ratios organic agents modified epoxy materials. To highlight the effect of these proteins in epoxy matrix mechanical tests as three-point bending and compression were performed.
- 15 September 2020
- Published by Universitatea Dunarea de Jos din Galati in The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science
- Vol. 43 (3) , 10-14
Open AccessThe Mechanical Properties of Organic Modified Epoxy Resin
Epoxy resins have been presenting a lot of scientific and technical interests and organic modified epoxy resins have recently receiving a great deal of attention. For obtaining the composite materials with good mechanical proprieties, a large variety of organic modification agents were used. For this study gluten and gelatin had been used as modifying agents thinking that their dispersion inside the polymer could increase the polymer biocompatibility. Equal amounts of the proteins were milled together and the obtained compound was used to form 1 to 5% weight ratios organic agents modified epoxy materials. To highlight the effect of these proteins in epoxy matrix mechanical tests as three-point bending and compression were performed.
- Open Access
- 15 August 2020
- Published by MDPI AG in Microorganisms
- Vol. 8 (8) , 1243
Improving Biodegradation of Clofibric Acid by Trametes pubescens through the Design of Experimental Tools
Clofibric acid (CLF) is the main pharmacologically active metabolite in composition of the pharmaceutical products used for controlling blood lipid content. This xenobiotic compound is highly persistent in the aquatic environment and passes unchanged or poorly transformed in wastewater treatment plants. A white-rot fungal strain of Trametes pubescens was previously selected, for its ability for clofibric acid biodegradation (up to 30%) during cultivation in submerged system under aerobic conditions at an initial CLF concentration of 15 mg L−1. Plackett-Burman design (PBD) and response surface methodology (RSM) were used for experimental planning, mathematical modelling and statistical analysis of data of the biotechnological process of CLF biotransformation by Trametes pubescens fungal strain. After optimization, the capacity of the selected Trametes pubescens strain to degrade CLF was increased by cultivation in a liquid medium containing 3 g·L−1 yeast extract, 15 g·L−1 peptone, 5 g·L−1 glucose and mineral salts, inoculated at 2% (v/v) vegetative inoculum and cultivated at pH 5.5, during 14 days at 25 °C and 135 rpm. In these optimized biotechnological conditions, the CLF biotransformation yield was 60%.
- 15 August 2020
- Published by MDPI AG in Microorganisms
- Vol. 8 (8) , 1243
Open AccessImproving Biodegradation of Clofibric Acid by Trametes pubescens through the Design of Experimental Tools
Clofibric acid (CLF) is the main pharmacologically active metabolite in composition of the pharmaceutical products used for controlling blood lipid content. This xenobiotic compound is highly persistent in the aquatic environment and passes unchanged or poorly transformed in wastewater treatment plants. A white-rot fungal strain of Trametes pubescens was previously selected, for its ability for clofibric acid biodegradation (up to 30%) during cultivation in submerged system under aerobic conditions at an initial CLF concentration of 15 mg L−1. Plackett-Burman design (PBD) and response surface methodology (RSM) were used for experimental planning, mathematical modelling and statistical analysis of data of the biotechnological process of CLF biotransformation by Trametes pubescens fungal strain. After optimization, the capacity of the selected Trametes pubescens strain to degrade CLF was increased by cultivation in a liquid medium containing 3 g·L−1 yeast extract, 15 g·L−1 peptone, 5 g·L−1 glucose and mineral salts, inoculated at 2% (v/v) vegetative inoculum and cultivated at pH 5.5, during 14 days at 25 °C and 135 rpm. In these optimized biotechnological conditions, the CLF biotransformation yield was 60%.