Yize Huang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yize Huang has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Xizhe Li
Research Institute of Petroleum Exploration and Development, PetroChina, Beijing 100083, China
4 shared publications - Chao Qian
Research Institute of Petroleum Exploration and Development, PetroChina, Beijing 100083, China
3 shared publications - Mengfei Zhou
Institute of Petroleum Exploration and Development, PetroChina Southwest Oil and Gas Field, Chengdu 610056, China
2 shared publications - Wei Lin
Institute of Geology and Paleontology, Linyi University, Linyi 276000, China
2 shared publications - Xiaohua Liu
PetroChina Research Institute of Petroleum Exploration & Development, Beijing 100083, China
2 shared publications Chang He
1 shared publication
Latest Publications
- Open Access
- 1 June 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (6)
CO2 injection-based enhanced methane recovery from carbonate gas reservoirs via deep learning
CO2 injection is a promising technology for enhancing gas recovery (CO2-EGR) that concomitantly reduces carbon emissions and aids the energy transition, although it has not yet been applied commercially at the field scale. We develop an innovative workflow using raw data to provide an effective approach in evaluating CH4 recovery during CO2-EGR. A well-calibrated three-dimensional geological model is generated and validated using actual field data—achieving a robust alignment between history and simulation. We visualize the spread of the CO2 plume and quantitatively evaluate the dynamic productivity to the single gas well. We use three deep learning algorithms to predict the time histories of CO2 rate and CH4 recovery and provide feedback on production wells across various injection systems. The results indicate that CO2 injection can enhance CH4 recovery in water-bearing gas reservoirs—CH4 recovery increases with injection rate escalating. Specifically, the increased injection rate diminishes CO2 breakthrough time while concurrently expanding the swept area. The increased injection rate reduces CO2 breakthrough time and increases the swept area. Deep learning algorithms exhibit superior predictive performance, with the gated recurrent unit model being the most reliable and fastest among the three algorithms, particularly when accommodating injection and production time series, as evidenced by its smallest values for evaluation metrics. This study provides an efficient method for predicting the dynamic productivity before and after CO2 injection, which exhibits a speedup that is 3–4 orders of magnitudes higher than traditional numerical simulation. Such models show promise in advancing the practical application of CO2-EGR technology in gas reservoir development.
- 1 June 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (6)
Open AccessCO2 injection-based enhanced methane recovery from carbonate gas reservoirs via deep learning
CO2 injection is a promising technology for enhancing gas recovery (CO2-EGR) that concomitantly reduces carbon emissions and aids the energy transition, although it has not yet been applied commercially at the field scale. We develop an innovative workflow using raw data to provide an effective approach in evaluating CH4 recovery during CO2-EGR. A well-calibrated three-dimensional geological model is generated and validated using actual field data—achieving a robust alignment between history and simulation. We visualize the spread of the CO2 plume and quantitatively evaluate the dynamic productivity to the single gas well. We use three deep learning algorithms to predict the time histories of CO2 rate and CH4 recovery and provide feedback on production wells across various injection systems. The results indicate that CO2 injection can enhance CH4 recovery in water-bearing gas reservoirs—CH4 recovery increases with injection rate escalating. Specifically, the increased injection rate diminishes CO2 breakthrough time while concurrently expanding the swept area. The increased injection rate reduces CO2 breakthrough time and increases the swept area. Deep learning algorithms exhibit superior predictive performance, with the gated recurrent unit model being the most reliable and fastest among the three algorithms, particularly when accommodating injection and production time series, as evidenced by its smallest values for evaluation metrics. This study provides an efficient method for predicting the dynamic productivity before and after CO2 injection, which exhibits a speedup that is 3–4 orders of magnitudes higher than traditional numerical simulation. Such models show promise in advancing the practical application of CO2-EGR technology in gas reservoir development.
- 1 March 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (3)
Physical simulation study on production characteristics and mechanism of connate water in gas reservoirs
The late-stage development of gas reservoirs often encounters the paradox of significant remaining formation pressure coupled with low wellhead pressure, which indicates small drainage volume, low gas production rate, and low recovery efficiency, reducing gas supply and economic benefit. Owing to the lack of experimental research, the reasons behind this contradiction between gas production and producing pressure differential are unclear. The key factors affecting the development outcomes are reservoir permeability and initial water saturation, while the evaluation parameters include gas and water production rates, reservoir pressure, and recovery efficiency. Based on the characteristic properties of typical gas fields, physical simulation experiments of constant-rate gas production are conducted on spliced long cores with average permeabilities of 2.300, 0.486, and 0.046 millidarcy (mD). Furthermore, leveraging the multi-point embedded pressure measurement technique, the pressure drawdown propagations and the macroscopic and microscopic characteristics of connate water production at the initial water saturations of 0%, 20%, 40%, and 55% are investigated. By connate water, we mean water that occurs naturally within the pores of rock. Pre- and post-experiment core weighing and nuclear magnetic resonance testing are performed. In addition to the mercury injection tests, the results indicate that during gas reservoir depletion, connate water primarily stems from macropores and mesopores, with micropores and nanopores capturing water through capillary imbibition. Moreover, lower permeability and higher initial water saturation lead to greater pressure gradients, increased connate water production, and reduced recovery efficiency. Reservoirs with permeabilities below 0.1 mD are significantly affected by connate water, exhibiting steep pressure profiles. Owing to connate water, the near-wellbore pressure quickly decreases, while distant reservoir pressure barely decreases, implying a limited drainage area. To enhance the recovery efficiency, measures like infill drilling and reservoir stimulation are recommended for low-permeability gas reservoirs.
- 1 March 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (3)
Physical simulation study on production characteristics and mechanism of connate water in gas reservoirs
The late-stage development of gas reservoirs often encounters the paradox of significant remaining formation pressure coupled with low wellhead pressure, which indicates small drainage volume, low gas production rate, and low recovery efficiency, reducing gas supply and economic benefit. Owing to the lack of experimental research, the reasons behind this contradiction between gas production and producing pressure differential are unclear. The key factors affecting the development outcomes are reservoir permeability and initial water saturation, while the evaluation parameters include gas and water production rates, reservoir pressure, and recovery efficiency. Based on the characteristic properties of typical gas fields, physical simulation experiments of constant-rate gas production are conducted on spliced long cores with average permeabilities of 2.300, 0.486, and 0.046 millidarcy (mD). Furthermore, leveraging the multi-point embedded pressure measurement technique, the pressure drawdown propagations and the macroscopic and microscopic characteristics of connate water production at the initial water saturations of 0%, 20%, 40%, and 55% are investigated. By connate water, we mean water that occurs naturally within the pores of rock. Pre- and post-experiment core weighing and nuclear magnetic resonance testing are performed. In addition to the mercury injection tests, the results indicate that during gas reservoir depletion, connate water primarily stems from macropores and mesopores, with micropores and nanopores capturing water through capillary imbibition. Moreover, lower permeability and higher initial water saturation lead to greater pressure gradients, increased connate water production, and reduced recovery efficiency. Reservoirs with permeabilities below 0.1 mD are significantly affected by connate water, exhibiting steep pressure profiles. Owing to connate water, the near-wellbore pressure quickly decreases, while distant reservoir pressure barely decreases, implying a limited drainage area. To enhance the recovery efficiency, measures like infill drilling and reservoir stimulation are recommended for low-permeability gas reservoirs.
- Open Access
Research on Productivity Evaluation Method Based on Shale Gas Well Early Flow Stage Data
Since the accurate early gas well production regime is related to the production period and final productivity, it is crucial to make better use of early flow stage production data for gas well productivity evaluation. Absolute open flow potential (AOF) and estimated ultimate recovery (EUR) are essential parameters for evaluating the productivity of shale gas wells. This study establishes new AOF calculation methods for the early production stage. The analytical model can calculate the AOF only by using stable pressure and production data in the flowback stage, which greatly improves the efficiency of productivity evaluation. Three methods have, respectively, calculated the productivity of the shale gas wells above 3500 m in the Luzhou block. The results show that well L2-3 has the highest AOF, averaging , whereas well Y2-8 has the lowest AOF, averaging . Different AOF calculation methods are identified for gas wells in different stages of production. For gas wells in the initial unstable flow stage, a pseudogas production index method is recommended. A water production index analysis method, with lower evaluation results, is proposed for gas wells in the flowback stage. A modern production decline analysis method is found to be preferred for calculating the EUR of deep shale gas wells. Well L2-3 has the highest average EUR of , whereas well Y2-8 has the lowest average EUR of . The Blasingame method is recommended for medium-to-high-production gas wells, whereas a normalized pressure integral method is suggested for low-production wells. A strong exponential quantitative link between the AOF and the EUR shows that a fracture system’s initial productivity has a significant impact on a well’s EUR. The findings of this study enrich the productivity evaluation system, increase the accuracy of productivity evaluation results, and provide theoretical support for deep shale gas wells.
Open AccessResearch on Productivity Evaluation Method Based on Shale Gas Well Early Flow Stage Data
Since the accurate early gas well production regime is related to the production period and final productivity, it is crucial to make better use of early flow stage production data for gas well productivity evaluation. Absolute open flow potential (AOF) and estimated ultimate recovery (EUR) are essential parameters for evaluating the productivity of shale gas wells. This study establishes new AOF calculation methods for the early production stage. The analytical model can calculate the AOF only by using stable pressure and production data in the flowback stage, which greatly improves the efficiency of productivity evaluation. Three methods have, respectively, calculated the productivity of the shale gas wells above 3500 m in the Luzhou block. The results show that well L2-3 has the highest AOF, averaging , whereas well Y2-8 has the lowest AOF, averaging . Different AOF calculation methods are identified for gas wells in different stages of production. For gas wells in the initial unstable flow stage, a pseudogas production index method is recommended. A water production index analysis method, with lower evaluation results, is proposed for gas wells in the flowback stage. A modern production decline analysis method is found to be preferred for calculating the EUR of deep shale gas wells. Well L2-3 has the highest average EUR of , whereas well Y2-8 has the lowest average EUR of . The Blasingame method is recommended for medium-to-high-production gas wells, whereas a normalized pressure integral method is suggested for low-production wells. A strong exponential quantitative link between the AOF and the EUR shows that a fracture system’s initial productivity has a significant impact on a well’s EUR. The findings of this study enrich the productivity evaluation system, increase the accuracy of productivity evaluation results, and provide theoretical support for deep shale gas wells.
- Open Access
- 24 May 2022
- Published by GeoScienceWorld in Lithosphere
- Vol. 2022 (Special 12)
Organic Matter Enrichment of Black Shale at the Turn of Ordovician-Silurian in the Paleosedimentary Center in Southern Sichuan Basin, Upper Yangtze Area
Herein, integrated vertical variation characteristic analysis was conducted by measuring total organic carbon (TOC), major and trace elements in Upper Ordovician-Lower Silurian (Wufeng-Longmaxi formations) black shale in Weiyuan, Luzhou, and Changning areas, southern Sichuan Basin to clarify the control of organic matter (OM) enrichment in different sublayers. According to the cycle boundary, it was divided into member 1 (submember 1 and submember 2) and member 2 from early to late Longmaxi formation, while it was divided into 4 sublayers from early to late during submember 1 depositional period. Under the warm and humid paleoclimate, high paleoproductivity, and gradually oxic paleoredox conditions, the TOC content (0.22-3.27 wt% in Luzhou area) in Wufeng formation increased gradually from early to late under the cocontrolling of tectonic framework and stagnant sea. After the glacial period, the warm and humid climate of Wufeng formation continued in Longmaxi formation, and TOC content reached the highest in sublayer 1 (2.02-4.02 wt%, 4.78 wt%, and 6.45 wt% in Weiyuan, Luzhou, and Changning areas, respectively), due to the high paleoproductivity and high sea level caused by melting glaciers, causing the extremely anoxic environment. The OM was preserved best. It remains higher in sublayer 2 (2.39 wt%, 3.69-4.18 wt%, and 3.5-3.86 wt% in three areas, respectively) because of the anoxic environment caused by deep water and the high paleoproductivity, but the temporary hot and dry environment has a certain negative impact on the OM preservation. Under the stable paleoproductivity, sublayer 3 has a character of water decreasing slowly, and the suboxic environment led to the decrease of TOC content (3.82-5.28 wt% and 3.77-4.13 wt% in Luzhou and Changning areas, respectively). Meanwhile, that in the yuan area became deeper and the TOC content became relatively higher (1.92-3.33 wt%). Under the open environment, sublayer 4 was controlled by lower sea level caused by regression, resulting in lower TOC content (1.31-4.57 wt%, 1.64-3.52 wt%, and 3.88-4.49 wt% in three areas, respectively). However, the global regression of the submember 2 period, high terrigenous debris dilution, and oxic environment lead to the no preservation of OM. Generally speaking, the enrichment of OM is not only affected by the changes of global sea level and paleoproductivity to some extent (Longmaxi shale) but also controlled by the tectonic framework in Sichuan Basin (Wufeng shale). The findings of this study can help for a better understanding of the OM enrichment mechanism and provide a theoretical basis for the evaluation of high-quality source rocks.
- 24 May 2022
- Published by GeoScienceWorld in Lithosphere
- Vol. 2022 (Special 12)
Open AccessOrganic Matter Enrichment of Black Shale at the Turn of Ordovician-Silurian in the Paleosedimentary Center in Southern Sichuan Basin, Upper Yangtze Area
Herein, integrated vertical variation characteristic analysis was conducted by measuring total organic carbon (TOC), major and trace elements in Upper Ordovician-Lower Silurian (Wufeng-Longmaxi formations) black shale in Weiyuan, Luzhou, and Changning areas, southern Sichuan Basin to clarify the control of organic matter (OM) enrichment in different sublayers. According to the cycle boundary, it was divided into member 1 (submember 1 and submember 2) and member 2 from early to late Longmaxi formation, while it was divided into 4 sublayers from early to late during submember 1 depositional period. Under the warm and humid paleoclimate, high paleoproductivity, and gradually oxic paleoredox conditions, the TOC content (0.22-3.27 wt% in Luzhou area) in Wufeng formation increased gradually from early to late under the cocontrolling of tectonic framework and stagnant sea. After the glacial period, the warm and humid climate of Wufeng formation continued in Longmaxi formation, and TOC content reached the highest in sublayer 1 (2.02-4.02 wt%, 4.78 wt%, and 6.45 wt% in Weiyuan, Luzhou, and Changning areas, respectively), due to the high paleoproductivity and high sea level caused by melting glaciers, causing the extremely anoxic environment. The OM was preserved best. It remains higher in sublayer 2 (2.39 wt%, 3.69-4.18 wt%, and 3.5-3.86 wt% in three areas, respectively) because of the anoxic environment caused by deep water and the high paleoproductivity, but the temporary hot and dry environment has a certain negative impact on the OM preservation. Under the stable paleoproductivity, sublayer 3 has a character of water decreasing slowly, and the suboxic environment led to the decrease of TOC content (3.82-5.28 wt% and 3.77-4.13 wt% in Luzhou and Changning areas, respectively). Meanwhile, that in the yuan area became deeper and the TOC content became relatively higher (1.92-3.33 wt%). Under the open environment, sublayer 4 was controlled by lower sea level caused by regression, resulting in lower TOC content (1.31-4.57 wt%, 1.64-3.52 wt%, and 3.88-4.49 wt% in three areas, respectively). However, the global regression of the submember 2 period, high terrigenous debris dilution, and oxic environment lead to the no preservation of OM. Generally speaking, the enrichment of OM is not only affected by the changes of global sea level and paleoproductivity to some extent (Longmaxi shale) but also controlled by the tectonic framework in Sichuan Basin (Wufeng shale). The findings of this study can help for a better understanding of the OM enrichment mechanism and provide a theoretical basis for the evaluation of high-quality source rocks.