Ling Tao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ling Tao has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Hao Wang
School of Energy and Power Engineering, Nanjing University of Science and Technology, Nanjing 210094, China
2 shared publications Bao Rong
Institute of Launch Dynamics, Nanjing University of Science and Technology, Nanjing, People’s Republic of China
1 shared publicationChundong Hu
Chinese Academy of Sciences, Institute of Plasma Physics, Hefei, China, 230031
1 shared publication- Chundong Hu
Chinese Academy of Sciences
1 shared publication - Chunlei Jiang
School of Energy and Power Engineering, Nanjing University of Science and Technology, Nanjing, China
1 shared publication Guoping Wang
Institute of Launch Dynamics, Nanjing University of Science and Technology, Nanjing, People’s Republic of China
1 shared publication
Latest Publications
- Open Access
Effects of Initial Separation Conditions on Submunition Motion During Multi-Body Separation in Near Space
Focusing on the complex aerodynamic interference and attitude response during multibody separation in the low-pressure and low-density environment of near space, a numerical investigation of the effects of different initial separation conditions on submunition motion is conducted. A three-dimensional unsteady flow model is established by coupling the six-degree-of-freedom rigid-body equations with the overset mesh technique. The effects of the free stream Mach number, initial angle of attack, initial separation velocity, and separation altitude on the motion characteristics of the submunition are systematically analyzed. The results show that, compared with conventional low-altitude conditions, aerodynamic forces have a weaker corrective effect on the separation motion and attitude in near space, making the initial separation parameters more influential. Increasing the free stream Mach number and initial angle of attack enhances the radial separation capability but intensifies the attitude response. As the separation altitude increases, the aerodynamic forces weaken, and the displacement and attitude variations in the submunition decrease accordingly. The initial axial separation velocity Vx0 has relatively little influence on the radial separation distance and pitching response. Increasing the initial radial separation velocity Vy0 increases the radial separation distance and reduces pitch oscillations, whereas increasing the magnitude of the initial lateral separation velocity significantly amplifies the roll and yaw responses. The results provide a reference for the design of initial parameters for multi-body separation systems operating in near space.Open AccessEffects of Initial Separation Conditions on Submunition Motion During Multi-Body Separation in Near Space
Focusing on the complex aerodynamic interference and attitude response during multibody separation in the low-pressure and low-density environment of near space, a numerical investigation of the effects of different initial separation conditions on submunition motion is conducted. A three-dimensional unsteady flow model is established by coupling the six-degree-of-freedom rigid-body equations with the overset mesh technique. The effects of the free stream Mach number, initial angle of attack, initial separation velocity, and separation altitude on the motion characteristics of the submunition are systematically analyzed. The results show that, compared with conventional low-altitude conditions, aerodynamic forces have a weaker corrective effect on the separation motion and attitude in near space, making the initial separation parameters more influential. Increasing the free stream Mach number and initial angle of attack enhances the radial separation capability but intensifies the attitude response. As the separation altitude increases, the aerodynamic forces weaken, and the displacement and attitude variations in the submunition decrease accordingly. The initial axial separation velocity Vx0 has relatively little influence on the radial separation distance and pitching response. Increasing the initial radial separation velocity Vy0 increases the radial separation distance and reduces pitch oscillations, whereas increasing the magnitude of the initial lateral separation velocity significantly amplifies the roll and yaw responses. The results provide a reference for the design of initial parameters for multi-body separation systems operating in near space. - Open Access
- 31 July 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (15) , 6683
Aerodynamic Characteristics and Its Sensitivity Analysis of a Cylindrical Projectile at Different Incidences
The accurate evaluation of aerodynamic characteristics is a prerequisite and foundation for the design of high-performance aerodynamic shapes, navigation guidance, and strength of projectiles. The nonlinearity of aerodynamic calculations for a projectile is high, and the modeling and simulation are difficult, especially under the high-angle of attack flight conditions. Small variations in flight conditions, and structural parameters, etc., may cause large deviations in aerodynamic responses. Taking a small cylindrical projectile as an example, and to realize its attitude control, it is necessary to conduct aerodynamic characteristics analysis on it and analyze the main influencing factors of its aerodynamic characteristics parameters. In this paper, the finite volume method is used to solve the three-dimensional unsteady N-S equation, combined with the SST k-ω turbulence model, the overlapping grid technology, and the forced pitching vibration method, and the aerodynamic characteristics analysis model of the projectile is established, which realizes the accurate simulation of the surrounding flow field, aerodynamic coefficients, and dynamic derivative of the projectile under different flight conditions. On this basis, the Sobol global sensitivity analysis method based on the augmented radial basis function surrogate model of aerodynamics characteristics and Latin hypercube sampling is used to efficiently analyze and obtain the main influence parameters of cylindrical projectile aerodynamic characteristics. This paper provides a basic theory and fast algorithm for subsequent engineering system design, which has important theoretical and engineering value.
- 31 July 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (15) , 6683
Open AccessAerodynamic Characteristics and Its Sensitivity Analysis of a Cylindrical Projectile at Different Incidences
The accurate evaluation of aerodynamic characteristics is a prerequisite and foundation for the design of high-performance aerodynamic shapes, navigation guidance, and strength of projectiles. The nonlinearity of aerodynamic calculations for a projectile is high, and the modeling and simulation are difficult, especially under the high-angle of attack flight conditions. Small variations in flight conditions, and structural parameters, etc., may cause large deviations in aerodynamic responses. Taking a small cylindrical projectile as an example, and to realize its attitude control, it is necessary to conduct aerodynamic characteristics analysis on it and analyze the main influencing factors of its aerodynamic characteristics parameters. In this paper, the finite volume method is used to solve the three-dimensional unsteady N-S equation, combined with the SST k-ω turbulence model, the overlapping grid technology, and the forced pitching vibration method, and the aerodynamic characteristics analysis model of the projectile is established, which realizes the accurate simulation of the surrounding flow field, aerodynamic coefficients, and dynamic derivative of the projectile under different flight conditions. On this basis, the Sobol global sensitivity analysis method based on the augmented radial basis function surrogate model of aerodynamics characteristics and Latin hypercube sampling is used to efficiently analyze and obtain the main influence parameters of cylindrical projectile aerodynamic characteristics. This paper provides a basic theory and fast algorithm for subsequent engineering system design, which has important theoretical and engineering value.
- 18 June 2024
- Published by Springer Nature
- p. 2675-2688
Uncertainty Quantification in Impulse Thruster Performance Using Polynomial Chaos Expansion
- 18 June 2024
- Published by Springer Nature
- p. 2675-2688
Uncertainty Quantification in Impulse Thruster Performance Using Polynomial Chaos Expansion
- Open Access
Study on Mass Erosion and Surface Temperature during High-Speed Penetration of Concrete by Projectile Considering Heat Conduction and Thermal Softening
The mass erosion of the kinetic energy of projectiles penetrating concrete targets at high speed is an important reason for the reduction in penetration efficiency. The heat generation and heat conduction in the projectile are important parts of the theoretical calculation of mass loss. In this paper, theoretical models are established to calculate the mass erosion and heat conduction of projectile noses, including models of cutting, melting, the heat conduction of flash temperature, and the conversion of plastic work into heat. The friction cutting model is modified considering the heat softening of metal, and a model of non-adiabatic processes for the nose was established based on the heat conduction theory to calculate the surface temperature. The coupling numerical calculation of the erosion and heat conduction of the projectile nose shows that melting erosion is the main factor of mass loss at high-speed penetration, and the mass erosion ratio of melting and cutting is related to the initial velocity. Critical velocity without melting erosion and a constant ratio of melting and cutting erosion exists, and the critical velocities are closely related to the melting temperature. In the process of penetration, the thickness of the heat affected zone (HAZ) gradually increases, and the entire heat conduction zone (EHZ) is about 5~6 times the thickness of the HAZ.
Open AccessStudy on Mass Erosion and Surface Temperature during High-Speed Penetration of Concrete by Projectile Considering Heat Conduction and Thermal Softening
The mass erosion of the kinetic energy of projectiles penetrating concrete targets at high speed is an important reason for the reduction in penetration efficiency. The heat generation and heat conduction in the projectile are important parts of the theoretical calculation of mass loss. In this paper, theoretical models are established to calculate the mass erosion and heat conduction of projectile noses, including models of cutting, melting, the heat conduction of flash temperature, and the conversion of plastic work into heat. The friction cutting model is modified considering the heat softening of metal, and a model of non-adiabatic processes for the nose was established based on the heat conduction theory to calculate the surface temperature. The coupling numerical calculation of the erosion and heat conduction of the projectile nose shows that melting erosion is the main factor of mass loss at high-speed penetration, and the mass erosion ratio of melting and cutting is related to the initial velocity. Critical velocity without melting erosion and a constant ratio of melting and cutting erosion exists, and the critical velocities are closely related to the melting temperature. In the process of penetration, the thickness of the heat affected zone (HAZ) gradually increases, and the entire heat conduction zone (EHZ) is about 5~6 times the thickness of the HAZ.
- 3 November 2022
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 111 (1) , 39-66
Efficient dynamics modeling and analysis for probabilistic uncertain beam systems with geometric nonlinearity and thermal coupling effect
- 3 November 2022
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 111 (1) , 39-66
Efficient dynamics modeling and analysis for probabilistic uncertain beam systems with geometric nonlinearity and thermal coupling effect
- Open Access
Efficient Sensitivity Analysis for Enhanced Heat Transfer Performance of Heat Sink with Swirl Flow Structure under One-Side Heating
Excellent heat transfer performance has increasingly become a key issue that needs to be solved urgently in the development process of large-scale fusion equipment. The study of heat transfer performance improvement to scientifically and reasonably determine the design parameters of the high heat flow (HHF) components of fusion reactors based on the efficient in-depth analysis of the heat transfer mechanism and its sensitive factors is of great significance. In this paper, a liquid-vapor two-phase flow model with subcooled boiling for a large length-diameter ratio swirl tube structure in the HHF calorimeter component is proposed to analyze the effects of key design parameters (such as inlet temperature of cooling water flow, swirl tube structure parameters, etc.) on its heat transfer performance. Then, considering the high computational cost of the liquid-vapor two-phase flow model, and in order to improve the efficiency of the sensitivity analysis of these design parameters, the polynomial response surface surrogate model of heat transfer performance function was constructed based on Latin hypercube sampling. On this basis, by combining the proposed surrogate model, the sensitivity index of each design parameter could be obtained efficiently using the Sobol global sensitivity analysis method. This method could greatly improve the calculation efficiency of the design parameter sensitivity analysis of HHF components in the fusion reactor, which provides vital guidance for the subsequent rapid design optimization of related components.
Open AccessEfficient Sensitivity Analysis for Enhanced Heat Transfer Performance of Heat Sink with Swirl Flow Structure under One-Side Heating
Excellent heat transfer performance has increasingly become a key issue that needs to be solved urgently in the development process of large-scale fusion equipment. The study of heat transfer performance improvement to scientifically and reasonably determine the design parameters of the high heat flow (HHF) components of fusion reactors based on the efficient in-depth analysis of the heat transfer mechanism and its sensitive factors is of great significance. In this paper, a liquid-vapor two-phase flow model with subcooled boiling for a large length-diameter ratio swirl tube structure in the HHF calorimeter component is proposed to analyze the effects of key design parameters (such as inlet temperature of cooling water flow, swirl tube structure parameters, etc.) on its heat transfer performance. Then, considering the high computational cost of the liquid-vapor two-phase flow model, and in order to improve the efficiency of the sensitivity analysis of these design parameters, the polynomial response surface surrogate model of heat transfer performance function was constructed based on Latin hypercube sampling. On this basis, by combining the proposed surrogate model, the sensitivity index of each design parameter could be obtained efficiently using the Sobol global sensitivity analysis method. This method could greatly improve the calculation efficiency of the design parameter sensitivity analysis of HHF components in the fusion reactor, which provides vital guidance for the subsequent rapid design optimization of related components.
- 24 May 2022
- Published by Taylor & Francis in Fusion Science and Technology
- Vol. 78 (6) , 490-502
Design and Verification of Calorimeter for CFETR Neutral Beam Injection System Prototype with Negative Ion Source
Currently, a neutral beam injection (NBI) system prototype with a 200-keV negative ion source, called the negative neutral beam injection (NNBI) system, is under construction for the China Fusion Engineering Test Reactor Project. In the NNBI system, the calorimeter is an extremely important high-heat-flux component, and its panels have to withstand a heat flux density of up to dozens of MW/m2 under some extreme conditions; thus, its efficient heat transfer enhancement design and the corresponding supporting structural design are most important, especially under the condition of a 3600-s long pulse. According to the detailed design requirements of the NNBI system, an overall design scheme of the calorimeter based on the heat transfer enhancement structure of the swirl tube (SW for short) is proposed in this paper. By using the gas-liquid two-phase flow boiling model and the supporting structure’s finite element model, the heat transfer performance of the heat exchange module, the mass flow distribution and pressure drop of the entire cooling circuit of the component, and the strength of the support structure are evaluated to verify the feasibility of the design scheme. Finally, based on the proposed design scheme, the detailed design of the temperature monitor system, which has high reliability and economy, is completed. This research provides important theoretical and engineering support for the structural development of the calorimeter for the NNBI verification prototype and will also provide references for the design and development of other internal components of large-scale fusion devices.
- 24 May 2022
- Published by Taylor & Francis in Fusion Science and Technology
- Vol. 78 (6) , 490-502
Design and Verification of Calorimeter for CFETR Neutral Beam Injection System Prototype with Negative Ion Source
Currently, a neutral beam injection (NBI) system prototype with a 200-keV negative ion source, called the negative neutral beam injection (NNBI) system, is under construction for the China Fusion Engineering Test Reactor Project. In the NNBI system, the calorimeter is an extremely important high-heat-flux component, and its panels have to withstand a heat flux density of up to dozens of MW/m2 under some extreme conditions; thus, its efficient heat transfer enhancement design and the corresponding supporting structural design are most important, especially under the condition of a 3600-s long pulse. According to the detailed design requirements of the NNBI system, an overall design scheme of the calorimeter based on the heat transfer enhancement structure of the swirl tube (SW for short) is proposed in this paper. By using the gas-liquid two-phase flow boiling model and the supporting structure’s finite element model, the heat transfer performance of the heat exchange module, the mass flow distribution and pressure drop of the entire cooling circuit of the component, and the strength of the support structure are evaluated to verify the feasibility of the design scheme. Finally, based on the proposed design scheme, the detailed design of the temperature monitor system, which has high reliability and economy, is completed. This research provides important theoretical and engineering support for the structural development of the calorimeter for the NNBI verification prototype and will also provide references for the design and development of other internal components of large-scale fusion devices.