Yasutaka Suzuki
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yasutaka Suzuki has a total of 86 co-authors. Here are the top co-authors by number of shared publications:
- Jun Kawamata
Yamaguchi University
9 shared publications Jun Kawamata
Graduate School of Sciences and Technology for Innovation, Yamaguchi University , 1677-1 Yoshida, Yamaguchi, Yamaguchi 753-8512 , Japan
5 shared publications- Tomoyuki Akutagawa
Tohoku University
4 shared publications Teruyuki Nakato
Department of Applied Chemistry, Strategic Research Unit for Innovative Multiscale Materials, Kyushu Institute of Technology , 1-1 Sensui-cho, Tobata, Kitakyu-shu, Fukuoka 804-8550 , Japan
3 shared publications- Teruyuki Nakato
Department of Applied Chemistry, Kyushu Institute of Technology, 1-1 Sensui-cho, Tobata, Kitakyushu, Fukuoka 804-8550, Japan
3 shared publications Akira Ikeda
Graduate School of Sciences and Technology for Innovation, Yamaguchi University , 1677-1 Yoshida, Yamaguchi, Yamaguchi 753-8512 , Japan
2 shared publications
Latest Publications
- 18 August 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (41) , 44218-44227
Low-Symmetry Crown Ether Design for Coexisting Ferroelectricity and Ferromagnetism in a Two-Dimensional Molecular Crystal
Multiferroics combining ferroelectricity and ferromagnetism within a single phase are promising materials for magnetoelectric (ME) functionalities. Compared with oxide-based systems, molecular materials offer greater structural tunability for realizing coupled ferroic behavior. Here we report a low-symmetry crown ether design for constructing a layered molecular crystal of [(o-fluoroanilinium+)(benzo[18]crown-6)][MnIICrIII(oxalate)3]−, in which supramolecular ferroelectricity coexists with two-dimensional ferromagnetic layers. This compound undergoes a reversible, single-crystal-to-single-crystal phase transition driven by the reorientation and conformational change of the polar benzo[18]crown-6 molecule, involving a 180° in-plane rotation and transformation of a polar V-shaped conformation into a planar configuration. Single-crystal X-ray diffraction, dielectric measurements, pyroelectric current, P–E hysteresis loops, and magnetic susceptibility measurements support the coexistence of ferroelectricity and ferromagnetism. Density functional theory (DFT) calculations and structural analysis identify the noncollinear supramolecular geometry of benzo[18]crown-6 units, their tilted assemblies, and the bistable motion as the origin of spontaneous polarization. This work demonstrates the effectiveness of the low-symmetry crown ether in designing molecular multiferroics.
- 18 August 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (41) , 44218-44227
Low-Symmetry Crown Ether Design for Coexisting Ferroelectricity and Ferromagnetism in a Two-Dimensional Molecular Crystal
Multiferroics combining ferroelectricity and ferromagnetism within a single phase are promising materials for magnetoelectric (ME) functionalities. Compared with oxide-based systems, molecular materials offer greater structural tunability for realizing coupled ferroic behavior. Here we report a low-symmetry crown ether design for constructing a layered molecular crystal of [(o-fluoroanilinium+)(benzo[18]crown-6)][MnIICrIII(oxalate)3]−, in which supramolecular ferroelectricity coexists with two-dimensional ferromagnetic layers. This compound undergoes a reversible, single-crystal-to-single-crystal phase transition driven by the reorientation and conformational change of the polar benzo[18]crown-6 molecule, involving a 180° in-plane rotation and transformation of a polar V-shaped conformation into a planar configuration. Single-crystal X-ray diffraction, dielectric measurements, pyroelectric current, P–E hysteresis loops, and magnetic susceptibility measurements support the coexistence of ferroelectricity and ferromagnetism. Density functional theory (DFT) calculations and structural analysis identify the noncollinear supramolecular geometry of benzo[18]crown-6 units, their tilted assemblies, and the bistable motion as the origin of spontaneous polarization. This work demonstrates the effectiveness of the low-symmetry crown ether in designing molecular multiferroics.
- Open Access
- 12 August 2024
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 40 (34) , 18297-18304
Liquid-Crystalline Photonic Sandwich: Electroresponsive Colloids of Clay Nanosheets Loading Photofunctional Dyes
Colloidal clay nanosheets obtained by the delamination of layered crystals of smectite-type clay minerals in water form liquid crystals because of their shape anisotropy. Loading of organic dyes onto the liquid crystalline clay nanosheets will enable novel photonic materials, where photofunctions of the loaded dye are controlled by the liquid crystallinity of the clay nanosheets. However, adsorption of organic dyes onto the nanosheets renders the nanosheet surfaces hydrophobic, and consequently, colloidal stability of the nanosheets is lost. In this study, this drawback is overcome by sandwiching cationic stilbazolium dyes between a pair of synthetic fluorohectorite nanosheets. This is realized by the preparation of stilbazolium-clay second-stage intercalation compounds characterized by intercalation of dye cations into every other interlayer space of the hectorite clay, where nonintercalated interlayer spaces are occupied by Na+ ions. The second-stage intercalation compounds are obtained by partial ion exchange of mother clay mineral incorporating Na+ ions in all of the interlayer spaces and delaminated from the Na+-containing interlayer spaces to form clay nanosheets sandwiching the dye molecules. Aqueous colloids of the dye-sandwiching clay nanosheets form colloidal liquid crystals, and the dye-sandwiching liquid crystalline clay nanosheets respond to an applied AC electric field to be aligned parallel to the electric field. The assembled structure of the dye-sandwiching clay nanosheets under the electric field is characterized by aligned discrete clay platelets, which is somewhat different from that of a colloidal liquid crystal of clay nanosheets without dye loading characterized by macroscopic liquid crystalline domains up to submillimeters. The electric alignment of the clay nanosheets induces alteration of light absorption of the sandwiched stilbazolium molecules, which verifies a strategy of constructing stimuli-responsive photonic materials of clay-organic hybrids.
- 12 August 2024
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 40 (34) , 18297-18304
Open AccessLiquid-Crystalline Photonic Sandwich: Electroresponsive Colloids of Clay Nanosheets Loading Photofunctional Dyes
Colloidal clay nanosheets obtained by the delamination of layered crystals of smectite-type clay minerals in water form liquid crystals because of their shape anisotropy. Loading of organic dyes onto the liquid crystalline clay nanosheets will enable novel photonic materials, where photofunctions of the loaded dye are controlled by the liquid crystallinity of the clay nanosheets. However, adsorption of organic dyes onto the nanosheets renders the nanosheet surfaces hydrophobic, and consequently, colloidal stability of the nanosheets is lost. In this study, this drawback is overcome by sandwiching cationic stilbazolium dyes between a pair of synthetic fluorohectorite nanosheets. This is realized by the preparation of stilbazolium-clay second-stage intercalation compounds characterized by intercalation of dye cations into every other interlayer space of the hectorite clay, where nonintercalated interlayer spaces are occupied by Na+ ions. The second-stage intercalation compounds are obtained by partial ion exchange of mother clay mineral incorporating Na+ ions in all of the interlayer spaces and delaminated from the Na+-containing interlayer spaces to form clay nanosheets sandwiching the dye molecules. Aqueous colloids of the dye-sandwiching clay nanosheets form colloidal liquid crystals, and the dye-sandwiching liquid crystalline clay nanosheets respond to an applied AC electric field to be aligned parallel to the electric field. The assembled structure of the dye-sandwiching clay nanosheets under the electric field is characterized by aligned discrete clay platelets, which is somewhat different from that of a colloidal liquid crystal of clay nanosheets without dye loading characterized by macroscopic liquid crystalline domains up to submillimeters. The electric alignment of the clay nanosheets induces alteration of light absorption of the sandwiched stilbazolium molecules, which verifies a strategy of constructing stimuli-responsive photonic materials of clay-organic hybrids.
- 31 July 2024
- Published by Oxford University Press (OUP) in Bulletin of the Chemical Society of Japan
- Vol. 97 (8)
Optical manipulation of graphene oxide nanosheets toward arbitrary hetero-stacking of graphene and niobate and titanate nanosheets
The study explores a novel method for constructing hetero-stacked bilayers of graphene and various inorganic oxide nanosheets by utilizing optical manipulation technique. A graphene oxide (GO) is trapped by a laser beam, and the GO nanosheet is converted to reduced graphene oxide (rGO). The rGO pressed against the substrate, forming a hetero-stacked rGO–GO bilayer. Precise control over the relative location of the nanosheets is achieved by optically manipulating the rGO nanosheet. The technique is demonstrated with rGO-niobate and rGO-titanate bilayers, highlighting its simplicity and versatility.
- 31 July 2024
- Published by Oxford University Press (OUP) in Bulletin of the Chemical Society of Japan
- Vol. 97 (8)
Optical manipulation of graphene oxide nanosheets toward arbitrary hetero-stacking of graphene and niobate and titanate nanosheets
The study explores a novel method for constructing hetero-stacked bilayers of graphene and various inorganic oxide nanosheets by utilizing optical manipulation technique. A graphene oxide (GO) is trapped by a laser beam, and the GO nanosheet is converted to reduced graphene oxide (rGO). The rGO pressed against the substrate, forming a hetero-stacked rGO–GO bilayer. Precise control over the relative location of the nanosheets is achieved by optically manipulating the rGO nanosheet. The technique is demonstrated with rGO-niobate and rGO-titanate bilayers, highlighting its simplicity and versatility.
- 18 April 2024
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 40 (17) , 9189-9196
Real-Time Monitoring of Adsorption-Induced Scrolling of Colloidal Inorganic Nanosheets
Inorganic nanotubes have attracted much attention due to their unique physicochemical properties. Nanotubes can be prepared by scrolling exfoliated nanosheets under ambient conditions. However, how the nanosheet scrolled in its colloidal state has not been experimentally visualized. In this paper, we directly observed the scrolling process of nanosheets upon adsorption of organic cations. Exfoliated flat nanosheets of niobate and clay in aqueous colloids were found to scroll by adding organic cations, such as exfoliation reagents, to the colloids. Employment of cationic stilbazolium dye enabled in situ observation of the dye adsorption and scrolling by optical microscopy based on changes in color and morphology of the nanosheets. The scrolling was promoted for nanosheets adsorbed with a stilbazolium dye with a longer alkyl chain, suggesting that the interaction between the hydrophobic parts of the dye cations is the driving force of the scrolling. This finding should encourage research on the formation of nanotubes from nanosheets and also provides important guidelines for the selection of appropriate exfoliation reagents when exfoliating nanosheets from layered crystals.
- 18 April 2024
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 40 (17) , 9189-9196
Real-Time Monitoring of Adsorption-Induced Scrolling of Colloidal Inorganic Nanosheets
Inorganic nanotubes have attracted much attention due to their unique physicochemical properties. Nanotubes can be prepared by scrolling exfoliated nanosheets under ambient conditions. However, how the nanosheet scrolled in its colloidal state has not been experimentally visualized. In this paper, we directly observed the scrolling process of nanosheets upon adsorption of organic cations. Exfoliated flat nanosheets of niobate and clay in aqueous colloids were found to scroll by adding organic cations, such as exfoliation reagents, to the colloids. Employment of cationic stilbazolium dye enabled in situ observation of the dye adsorption and scrolling by optical microscopy based on changes in color and morphology of the nanosheets. The scrolling was promoted for nanosheets adsorbed with a stilbazolium dye with a longer alkyl chain, suggesting that the interaction between the hydrophobic parts of the dye cations is the driving force of the scrolling. This finding should encourage research on the formation of nanotubes from nanosheets and also provides important guidelines for the selection of appropriate exfoliation reagents when exfoliating nanosheets from layered crystals.
- Open Access
- 19 March 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 12 (15) , 5578-5586
Ferroelectricity of alkylamide-substituted triptycene derivatives
1,8,13-Tris(dodecyloxy)triptycene forms uniform two-dimensional (2D) thin films by self-assembly. We synthesized new 1,8,13- and 1,8-substituted triptycene derivatives in which the alkoxy chains were replaced with alkylamide chains capable of hydrogen-bonding and investigated their phase transition behaviors, molecular assembly structures, and dielectric properties. In the three-chain compounds, the formation of a tightly packed 2D structure dominated by one-dimensional (1D) intermolecular N–H⋯O hydrogen bonds was observed. In the two-chain compounds, the molecular arrangement and hydrogen bonding patterns were different from those of the three-chain molecules due to the decrease in the occupied volume of the alkyl chains and molecular symmetry, and the disorder in the molecular arrangement increased in the hydrophobic moiety. Both compounds exhibit solid-to-solid and solid-to-liquid phase transitions without forming a liquid-crystalline phase. In the temperature- and frequency-dependent dielectric constants, thermally activated dynamics of the polar amide groups with increasing temperature was observed at low frequencies, accompanied by a hysteresis in the polarization–electric field (P–E) curve above 400 K, which is a characteristic of ferroelectrics.
- 19 March 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 12 (15) , 5578-5586
Open AccessFerroelectricity of alkylamide-substituted triptycene derivatives
1,8,13-Tris(dodecyloxy)triptycene forms uniform two-dimensional (2D) thin films by self-assembly. We synthesized new 1,8,13- and 1,8-substituted triptycene derivatives in which the alkoxy chains were replaced with alkylamide chains capable of hydrogen-bonding and investigated their phase transition behaviors, molecular assembly structures, and dielectric properties. In the three-chain compounds, the formation of a tightly packed 2D structure dominated by one-dimensional (1D) intermolecular N–H⋯O hydrogen bonds was observed. In the two-chain compounds, the molecular arrangement and hydrogen bonding patterns were different from those of the three-chain molecules due to the decrease in the occupied volume of the alkyl chains and molecular symmetry, and the disorder in the molecular arrangement increased in the hydrophobic moiety. Both compounds exhibit solid-to-solid and solid-to-liquid phase transitions without forming a liquid-crystalline phase. In the temperature- and frequency-dependent dielectric constants, thermally activated dynamics of the polar amide groups with increasing temperature was observed at low frequencies, accompanied by a hysteresis in the polarization–electric field (P–E) curve above 400 K, which is a characteristic of ferroelectrics.
- 9 August 2023
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 39 (33) , 11646-11652
Noninvasive Three-dimensional Assessment of Single Molecular Crystals Using Multiphoton Microscopic Observation and Their Deformation-induced Emission Characteristics
Distinguishing the luminescence contribution from thesurface andbulk of a crystal is a long-standing challenge in crystal materials.Herein, three-dimensional, multiphoton, luminescence microscope imagingof the elastic molecular single crystal 1,4-bis(4-methylthien-2-yl)-2,3,5,6-tetrafluoro-benzene,was conducted. Further, the luminescence contribution from the surfaceand bulk of the crystal was experimentally distinguished. Strong luminescencewas observed only from the surface of the crystal, while the bulkdid not emit strongly. Furthermore, the surface and bulk luminescencebehavior responded well to the mechanical shape change of the crystal;i.e., strong luminescence was observed for the elongated side of thecrystal.
- 9 August 2023
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 39 (33) , 11646-11652
Noninvasive Three-dimensional Assessment of Single Molecular Crystals Using Multiphoton Microscopic Observation and Their Deformation-induced Emission Characteristics
Distinguishing the luminescence contribution from thesurface andbulk of a crystal is a long-standing challenge in crystal materials.Herein, three-dimensional, multiphoton, luminescence microscope imagingof the elastic molecular single crystal 1,4-bis(4-methylthien-2-yl)-2,3,5,6-tetrafluoro-benzene,was conducted. Further, the luminescence contribution from the surfaceand bulk of the crystal was experimentally distinguished. Strong luminescencewas observed only from the surface of the crystal, while the bulkdid not emit strongly. Furthermore, the surface and bulk luminescencebehavior responded well to the mechanical shape change of the crystal;i.e., strong luminescence was observed for the elongated side of thecrystal.
- 13 July 2023
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 23 (8) , 5889-5898
Chiral Plastic Crystal of Solid-State Dual Rotators
- 13 July 2023
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 23 (8) , 5889-5898
Chiral Plastic Crystal of Solid-State Dual Rotators
- 5 September 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (36) , 40481-40490
NIR-II-Excitable Dye-Loaded Nanoemulsions for Two-Photon Microscopy Imaging of Capillary Blood Vessels in the Entire Hippocampal CA1 Region of Living Mice
For in vivo two-photon fluorescence microscopy (2PM) imaging, the development of techniques that can improve the observable depth and temporal resolution is an important challenge to address biological and biomedical concerns such as vascular dynamics in the deep brain (typically the hippocampal region) of living animals. Improvements have been achieved through two approaches: an optical approach using a highly tissue-penetrating excitation laser oscillating in the second near-infrared wavelength region (NIR-II, 1100-1350 nm) and a chemical approach employing fluorescent probes with high two-photon brightness (characterized by the product of the two-photon absorption cross section, σ2, and the fluorescence quantum yield, Φ). To integrate these two approaches, we developed a fluorescent dye exhibiting a sufficiently high σ2Φ value of 68 Goeppert-Mayer units at 1100 nm. When a nanoemulsion encapsulating >1000 dye molecules per particle and a 1100 nm laser were employed for 2PM imaging, capillary blood vessels in almost the entire hippocampal CA1 region of the mouse brain (approximately 1.1-1.5 mm below the surface) were clearly visualized at a frame rate of 30 frames s-1 (averaged over eight frames, practically 3.75 frames s-1). This observable depth and frame rate are much higher than those in previous reports on 2PM imaging. Furthermore, this nanoemulsion allowed for the visualization of blood vessels at a depth of 1.8 mm, corresponding to the hippocampal dentate gyrus. These results highlight the advantage of combining bright probes with NIR-II lasers. Our probe is a promising tool for studying the vascular dynamics of living animals and related diseases.
- 5 September 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (36) , 40481-40490
NIR-II-Excitable Dye-Loaded Nanoemulsions for Two-Photon Microscopy Imaging of Capillary Blood Vessels in the Entire Hippocampal CA1 Region of Living Mice
For in vivo two-photon fluorescence microscopy (2PM) imaging, the development of techniques that can improve the observable depth and temporal resolution is an important challenge to address biological and biomedical concerns such as vascular dynamics in the deep brain (typically the hippocampal region) of living animals. Improvements have been achieved through two approaches: an optical approach using a highly tissue-penetrating excitation laser oscillating in the second near-infrared wavelength region (NIR-II, 1100-1350 nm) and a chemical approach employing fluorescent probes with high two-photon brightness (characterized by the product of the two-photon absorption cross section, σ2, and the fluorescence quantum yield, Φ). To integrate these two approaches, we developed a fluorescent dye exhibiting a sufficiently high σ2Φ value of 68 Goeppert-Mayer units at 1100 nm. When a nanoemulsion encapsulating >1000 dye molecules per particle and a 1100 nm laser were employed for 2PM imaging, capillary blood vessels in almost the entire hippocampal CA1 region of the mouse brain (approximately 1.1-1.5 mm below the surface) were clearly visualized at a frame rate of 30 frames s-1 (averaged over eight frames, practically 3.75 frames s-1). This observable depth and frame rate are much higher than those in previous reports on 2PM imaging. Furthermore, this nanoemulsion allowed for the visualization of blood vessels at a depth of 1.8 mm, corresponding to the hippocampal dentate gyrus. These results highlight the advantage of combining bright probes with NIR-II lasers. Our probe is a promising tool for studying the vascular dynamics of living animals and related diseases.
- 17 May 2022
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 38 (21) , 6647-6652
Formation of a Giant Anisotropically Ordered Assembled Structure of Inorganic Nanosheets through an Optically Induced Stream
Formation of a desirable submillimeter-scaled assembled structure of particles in the colloid is a difficult subject in colloidal chemistry. Herein, a submillimeter-scaled ordered assembled structure consisting of highly anisotropic two-dimensional plate-like particles, niobate nanosheets, was obtained through an optical manipulation technique that was assisted by a scattering-force-induced stream. A 532 nm continuous wave laser beam with a power of 400 mW was used to illuminate a liquid crystalline niobate nanosheet colloid from the bottom side of a sample cell, inducing the stream of oriented nanosheets toward the upper side of the sample cell. As a result, a 200 mu m ordered assembled structure consisting of oriented nanosheets was formed. The assembled structure was also characterized by two-dimensional anisotropy, reflecting that the highly anisotropic morphologies of each nanosheet and the shape of that structure were dependent on the polarization of incident illumination. This study has revealed a new noncontact and on-demand way to obtain submillimeter-scaled ordered anisotropic colloidal assembled structures of nanosized particles such as nanosheets, contributing to fundamental materials science and expanding the utilities of nanosheets.
- 17 May 2022
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 38 (21) , 6647-6652
Formation of a Giant Anisotropically Ordered Assembled Structure of Inorganic Nanosheets through an Optically Induced Stream
Formation of a desirable submillimeter-scaled assembled structure of particles in the colloid is a difficult subject in colloidal chemistry. Herein, a submillimeter-scaled ordered assembled structure consisting of highly anisotropic two-dimensional plate-like particles, niobate nanosheets, was obtained through an optical manipulation technique that was assisted by a scattering-force-induced stream. A 532 nm continuous wave laser beam with a power of 400 mW was used to illuminate a liquid crystalline niobate nanosheet colloid from the bottom side of a sample cell, inducing the stream of oriented nanosheets toward the upper side of the sample cell. As a result, a 200 mu m ordered assembled structure consisting of oriented nanosheets was formed. The assembled structure was also characterized by two-dimensional anisotropy, reflecting that the highly anisotropic morphologies of each nanosheet and the shape of that structure were dependent on the polarization of incident illumination. This study has revealed a new noncontact and on-demand way to obtain submillimeter-scaled ordered anisotropic colloidal assembled structures of nanosized particles such as nanosheets, contributing to fundamental materials science and expanding the utilities of nanosheets.