Katerina Galantini Velarde
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Katerina Galantini Velarde has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Alexandre Almeida Del Savio
Carrera de Ingeniería Civil, Instituto de Investigación Científica, Universidad de Lima, Lima, Perú
6 shared publications - Ana Luna Torres
Scientific Research Institute (IDIC), Universidad de Lima, Lima 15023, Peru
2 shared publications - Lisette Abrahamzon Garcia
Universidad de Lima, Lima, Peru
2 shared publications - A. Pachas
Civil Engineering Program, Universidad de Lima, Lima, Peru
1 shared publication - Bertha Díaz
Faculty of Engineering and Architecture, Universidad de Lima, Lima 15102, Peru
1 shared publication - Edgar Valcárcel Pollard
Faculty of Engineering and Architecture, Universidad de Lima, Lima 15102, Peru
1 shared publication
Latest Publications
- Open Access
- 4 September 2026
- Published by International Association of Online Engineering (IAOE) in International Journal of Engineering Pedagogy (iJEP)
- Vol. 16 (5) , 80–111
Undergraduate Research Training and Generic Competencies in Engineering Graduates
Higher education programs are embracing curricular models that incorporate active teaching-learning methodologies to foster students’ active participation in knowledge building, based on competency-based training. Research-based learning (RBL) stands out as an active methodology that can be used at various academic levels, including undergraduate. In this context, the present research explores the contribution of undergraduate research training to the process of developing generic competencies in engineering students. The study focuses on the perceptions of a group of employers and graduates from a Peruvian higher education institution. A mixed-methods approach was adopted, as interviews and surveys were applied. The study had a descriptive purpose with a concurrent design. The findings suggest that undergraduate research training is perceived as supporting the development of generic competencies such as research, teamwork, effective communication, analytical and critical thinking, adaptability, digital literacy, intellectual curiosity, and lifelong learning (LL). Overall, the results highlight undergraduate research training, implemented through RBL, as an effective strategy associated with the development and strengthening of generic competencies and the alignment of Science, Technology, Engineering, and Mathematics (STEM) education with labor market demands, while underscoring the importance of consolidating an institutional research culture within competency-based curricula.
- 4 September 2026
- Published by International Association of Online Engineering (IAOE) in International Journal of Engineering Pedagogy (iJEP)
- Vol. 16 (5) , 80–111
Open AccessUndergraduate Research Training and Generic Competencies in Engineering Graduates
Higher education programs are embracing curricular models that incorporate active teaching-learning methodologies to foster students’ active participation in knowledge building, based on competency-based training. Research-based learning (RBL) stands out as an active methodology that can be used at various academic levels, including undergraduate. In this context, the present research explores the contribution of undergraduate research training to the process of developing generic competencies in engineering students. The study focuses on the perceptions of a group of employers and graduates from a Peruvian higher education institution. A mixed-methods approach was adopted, as interviews and surveys were applied. The study had a descriptive purpose with a concurrent design. The findings suggest that undergraduate research training is perceived as supporting the development of generic competencies such as research, teamwork, effective communication, analytical and critical thinking, adaptability, digital literacy, intellectual curiosity, and lifelong learning (LL). Overall, the results highlight undergraduate research training, implemented through RBL, as an effective strategy associated with the development and strengthening of generic competencies and the alignment of Science, Technology, Engineering, and Mathematics (STEM) education with labor market demands, while underscoring the importance of consolidating an institutional research culture within competency-based curricula.
- Open Access
- 10 October 2024
- Published by International Association of Online Engineering (IAOE) in International Journal of Engineering Pedagogy (iJEP)
- Vol. 14 (7) , 30-53
Research Training: Unraveling the Research Methodological Design Challenge in Engineering Programs
Research training stands out as a means to develop generic competencies, potentiate lifelong learning (LL), and integrate initiatives for compliance with the 17 Sustainable Development Goals (SDGs), contributing to the development of a resilient society. Therefore, the constant promotion of a research culture within higher education institutions is an essential task for reducing the gap between scientific productivity and industry challenges and proposing solutions to real-life challenges. One of the main stages involved in any research process is the proposition of a methodological design: a detailed plan conceived and later developed to answer the research questions. Nevertheless, within the engineering context, even though a wide range of methodological designs are considered, these are not always explicitly stated in research papers, so at the undergraduate level there is an absence of more precise guidelines that allow a more concise orientation. Consequently, at this level, a challenge in research training is perceived. This provided a motivation: the development of a framework for the actors involved in research training at the engineering undergraduate level so that they can easily define the methodological design. In this context, the present research proposes a framework organized upon the two main phases of every research process: design and execution. The framework is expected to promote the proper use of research methodology among engineering students. Furthermore, the methodological design from 140 selected civil engineering papers from seven different knowledge fields is analyzed. Results show that 94.29% of the papers did not explicitly present the methodological design. It was concluded that there is an absence of it within the engineering field. Thus, a methodological design framework proposal for engineering students was developed to overcome this situation.
- 10 October 2024
- Published by International Association of Online Engineering (IAOE) in International Journal of Engineering Pedagogy (iJEP)
- Vol. 14 (7) , 30-53
Open AccessResearch Training: Unraveling the Research Methodological Design Challenge in Engineering Programs
Research training stands out as a means to develop generic competencies, potentiate lifelong learning (LL), and integrate initiatives for compliance with the 17 Sustainable Development Goals (SDGs), contributing to the development of a resilient society. Therefore, the constant promotion of a research culture within higher education institutions is an essential task for reducing the gap between scientific productivity and industry challenges and proposing solutions to real-life challenges. One of the main stages involved in any research process is the proposition of a methodological design: a detailed plan conceived and later developed to answer the research questions. Nevertheless, within the engineering context, even though a wide range of methodological designs are considered, these are not always explicitly stated in research papers, so at the undergraduate level there is an absence of more precise guidelines that allow a more concise orientation. Consequently, at this level, a challenge in research training is perceived. This provided a motivation: the development of a framework for the actors involved in research training at the engineering undergraduate level so that they can easily define the methodological design. In this context, the present research proposes a framework organized upon the two main phases of every research process: design and execution. The framework is expected to promote the proper use of research methodology among engineering students. Furthermore, the methodological design from 140 selected civil engineering papers from seven different knowledge fields is analyzed. Results show that 94.29% of the papers did not explicitly present the methodological design. It was concluded that there is an absence of it within the engineering field. Thus, a methodological design framework proposal for engineering students was developed to overcome this situation.
- Open Access
- 5 August 2024
- Published by International Association of Online Engineering (IAOE) in International Journal of Engineering Pedagogy (iJEP)
- Vol. 14 (6) , 109-138
Embedding Building Information Modelling in the Construction Area: A Case within an Undergraduate Civil Engineering Program
Undergraduate programs face the challenge of staying up-to-date by responding to globalization, internationalization, and regionalization processes. Civil engineering programs should meet the requirements of the Architecture, Engineering, Construction, and Operation (AECO) industry. Building Information Modelling (BIM) is a methodology that involves shared digital representations of built assets to facilitate design, construction, and operation processes within the construction knowledge field. The present research describes a methodology with six mechanisms to develop and consolidate BIM-related competencies within the construction area from an undergraduate civil engineering program. It also explores students’ perceptions about the subjects within this area and their relationship with the training and reinforcement of the competencies. The study follows a descriptive scope with an action research design. The principal result is the methodology, which has six mechanisms: (1) BIM implementation into topics and syllabi; (2) use of collaborative platforms; (3) professor training programs; (4) establishment of student organizations; (5) development of a BIM application project; and (6) area and subject meetings. The validation process, which included professors, enrollment, employability and research rates, and the curricular proposal and students’ perceptions, revealed that the mechanisms could effectively support the development and reinforcement of BIM-related competencies.
- 5 August 2024
- Published by International Association of Online Engineering (IAOE) in International Journal of Engineering Pedagogy (iJEP)
- Vol. 14 (6) , 109-138
Open AccessEmbedding Building Information Modelling in the Construction Area: A Case within an Undergraduate Civil Engineering Program
Undergraduate programs face the challenge of staying up-to-date by responding to globalization, internationalization, and regionalization processes. Civil engineering programs should meet the requirements of the Architecture, Engineering, Construction, and Operation (AECO) industry. Building Information Modelling (BIM) is a methodology that involves shared digital representations of built assets to facilitate design, construction, and operation processes within the construction knowledge field. The present research describes a methodology with six mechanisms to develop and consolidate BIM-related competencies within the construction area from an undergraduate civil engineering program. It also explores students’ perceptions about the subjects within this area and their relationship with the training and reinforcement of the competencies. The study follows a descriptive scope with an action research design. The principal result is the methodology, which has six mechanisms: (1) BIM implementation into topics and syllabi; (2) use of collaborative platforms; (3) professor training programs; (4) establishment of student organizations; (5) development of a BIM application project; and (6) area and subject meetings. The validation process, which included professors, enrollment, employability and research rates, and the curricular proposal and students’ perceptions, revealed that the mechanisms could effectively support the development and reinforcement of BIM-related competencies.
- Open Access
- 5 June 2024
- Published by International Association of Online Engineering (IAOE) in International Journal of Engineering Pedagogy (iJEP)
- Vol. 14 (5) , 88-108
Augmented Reality for the Development and Reinforcement of Spatial Skills: A Case Applied to Civil Engineering Students
The architecture, engineering, construction, and operation (AECO) industry has brought transformations within the field. Despite the changes, traditional teaching methods such as analyzing two-dimensional plans and models are still being used in training processes, which do not effectively promote the development of spatial skills. In this context, augmented reality (AR) can be used as a tool to translate two-dimensional information into three-dimensional space. Thus, the present study explores the use of the VT-Platform AR tool to develop and reinforce spatial skills among undergraduate civil engineering students. The study follows a quantitative approach with a descriptive scope and an experimental design. Students in the sanitary engineering subject were divided into two groups: an experimental group and a control group. A short-term teaching-learning methodology was proposed for the experimental group using the VT-Platform AR tool. Both groups took the differential aptitude test (DAT) to measure their spatial skills. The experimental group showed a higher average score compared to the control group, with a difference of 29.8%. Furthermore, the use of the VT-Platform AR tool helped standardize the level of spatial skills within the experimental group. It was concluded that using the VT-Platform AR tool can effectively develop and reinforce spatial skills among students.
- 5 June 2024
- Published by International Association of Online Engineering (IAOE) in International Journal of Engineering Pedagogy (iJEP)
- Vol. 14 (5) , 88-108
Open AccessAugmented Reality for the Development and Reinforcement of Spatial Skills: A Case Applied to Civil Engineering Students
The architecture, engineering, construction, and operation (AECO) industry has brought transformations within the field. Despite the changes, traditional teaching methods such as analyzing two-dimensional plans and models are still being used in training processes, which do not effectively promote the development of spatial skills. In this context, augmented reality (AR) can be used as a tool to translate two-dimensional information into three-dimensional space. Thus, the present study explores the use of the VT-Platform AR tool to develop and reinforce spatial skills among undergraduate civil engineering students. The study follows a quantitative approach with a descriptive scope and an experimental design. Students in the sanitary engineering subject were divided into two groups: an experimental group and a control group. A short-term teaching-learning methodology was proposed for the experimental group using the VT-Platform AR tool. Both groups took the differential aptitude test (DAT) to measure their spatial skills. The experimental group showed a higher average score compared to the control group, with a difference of 29.8%. Furthermore, the use of the VT-Platform AR tool helped standardize the level of spatial skills within the experimental group. It was concluded that using the VT-Platform AR tool can effectively develop and reinforce spatial skills among students.
- Open Access
- 21 March 2023
- Published by International Association of Online Engineering (IAOE) in International Journal of Engineering Pedagogy (iJEP)
- Vol. 13 (2) , 64-85
Applying Project-Based Learning (PBL) for Teaching Virtual Design Construction (VDC)
Learning-centered models, which rely on active methodologies such as Project-Based Learning (PBL), should be adopted in undergraduate programs to potentiate the development of collaboration skills within future industry professionals like civil engineers. Thus, this study reports the implementation of PBL in two successive Virtual Design and Construction (VDC) courses from an undergraduate civil engineering program: 1) VDC I, in which the VDC methodology implementation was applied theoretically in an already-built project, and 2) VDC II, in which the VDC methodology implementation was applied in a currently-under-construction project. The study's objective is to identify students' perceptions of PBL influence on their learning experience, degree of acquisition of generic competencies, and project development under the VDC methodology. To assess the PBL and VDC implementation, a survey was applied to measure students' perceptions of the three mentioned variables. Results show an increase in their perceptions about the benefits of implementing VDC and PBL for the generic competencies acquisition process by more than a third, compared to other studies which implemented Building Information Modelling (BIM) with PBL. This is due to the theoretical background of the VDC methodology in terms of collaboration, processes, and tools. Besides, VDC II students' perceptions of the generic competencies' development process, degree of learning, and project development improved by 6.13%, 7.15%, and 3.44%, respectively, compared to VDC I students' perceptions, which is owed to the natural interaction between students and stakeholders of the projects adopted.
- 21 March 2023
- Published by International Association of Online Engineering (IAOE) in International Journal of Engineering Pedagogy (iJEP)
- Vol. 13 (2) , 64-85
Open AccessApplying Project-Based Learning (PBL) for Teaching Virtual Design Construction (VDC)
Learning-centered models, which rely on active methodologies such as Project-Based Learning (PBL), should be adopted in undergraduate programs to potentiate the development of collaboration skills within future industry professionals like civil engineers. Thus, this study reports the implementation of PBL in two successive Virtual Design and Construction (VDC) courses from an undergraduate civil engineering program: 1) VDC I, in which the VDC methodology implementation was applied theoretically in an already-built project, and 2) VDC II, in which the VDC methodology implementation was applied in a currently-under-construction project. The study's objective is to identify students' perceptions of PBL influence on their learning experience, degree of acquisition of generic competencies, and project development under the VDC methodology. To assess the PBL and VDC implementation, a survey was applied to measure students' perceptions of the three mentioned variables. Results show an increase in their perceptions about the benefits of implementing VDC and PBL for the generic competencies acquisition process by more than a third, compared to other studies which implemented Building Information Modelling (BIM) with PBL. This is due to the theoretical background of the VDC methodology in terms of collaboration, processes, and tools. Besides, VDC II students' perceptions of the generic competencies' development process, degree of learning, and project development improved by 6.13%, 7.15%, and 3.44%, respectively, compared to VDC I students' perceptions, which is owed to the natural interaction between students and stakeholders of the projects adopted.
- Open Access
- 29 November 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (23) , 12203
A Methodology for Embedding Building Information Modelling (BIM) in an Undergraduate Civil Engineering Program
Undergraduate programs face the permanent challenge of constantly transforming to keep an up-to-date curriculum according to globalization and internationalization processes. In the case of civil engineers, professional training should respond to the needs of the Architecture, Engineering, Construction, and Operation (AECO) industry. In this context, Building Information Modelling (BIM) constitutes a process involving shared digital representations of built assets to facilitate design, construction, and operations processes within the industry to form a reliable base for decision-making. The present research develops a methodology and a proposal to embed BIM in an undergraduate civil engineering competency-based curriculum. Mixed method research was applied with a descriptive approach and a concurrent design. The results show that it is possible to implement a curricular design to embed BIM transversally. The study concludes that this design was embraced by the AECO industry, as the number of students, the number of employed graduates, and institutional national and international agreements have positively increased from 2017, at the launch of the program, to 2022.
- 29 November 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (23) , 12203
Open AccessA Methodology for Embedding Building Information Modelling (BIM) in an Undergraduate Civil Engineering Program
Undergraduate programs face the permanent challenge of constantly transforming to keep an up-to-date curriculum according to globalization and internationalization processes. In the case of civil engineers, professional training should respond to the needs of the Architecture, Engineering, Construction, and Operation (AECO) industry. In this context, Building Information Modelling (BIM) constitutes a process involving shared digital representations of built assets to facilitate design, construction, and operations processes within the industry to form a reliable base for decision-making. The present research develops a methodology and a proposal to embed BIM in an undergraduate civil engineering competency-based curriculum. Mixed method research was applied with a descriptive approach and a concurrent design. The results show that it is possible to implement a curricular design to embed BIM transversally. The study concludes that this design was embraced by the AECO industry, as the number of students, the number of employed graduates, and institutional national and international agreements have positively increased from 2017, at the launch of the program, to 2022.