Andreas Wienke
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Andreas Wienke has a total of 103 co-authors. Here are the top co-authors by number of shared publications:
Marco Jupé
Leibniz University Hannover
23 shared publicationsDetlev Ristau
Leibniz University Hannover
20 shared publicationsMorten Steinecke
10 shared publications- Detlev Ristau
Laser Zentrum Hannover e.V. (Germany)
6 shared publications Gerd-Albert Hoffmann
Leibniz Universität Hannover
6 shared publicationsHolger Badorreck
Laser Zentrum Hannover e.V.
6 shared publications
Latest Publications
- 9 November 2026
- Published by SPIE-Intl Soc Optical Eng
- p. 23
Large area optical coatings and laser damage-measurements for high-power applications
Current applications for high-power lasers critically rely on high-quality optical coatings for the low-loss transport of cw and pulsed laser radiation. These coatings must exhibit exceptionally high quality regarding their material properties, defect class, and uniformity across large optical surfaces as well as high laser damage resistance. Fabrication and characterization of these coatings currently pose challenges that need to be addressed to enable demanding laser applications like advanced manufacturing, future inertial confinement fusion, and usage of directed energy for defense purposes. Therefore, coating research at LZH is currently focused on determining and increasing the cw and pulsed LIDT (laser-induced damage threshold) with innovative strategies for high-LIDT coatings and their characterization on optics with diameters up to 400 mm, as well as a novel concept to manufacture high-quality uniform coating of optics with diameters of up to two meters. This contribution will outline the current progress in these projects, featuring recent findings regarding optimized coating design approaches, as well as large-area coatings and LIDT metrology.
- 9 November 2026
- Published by SPIE-Intl Soc Optical Eng
- p. 23
Large area optical coatings and laser damage-measurements for high-power applications
Current applications for high-power lasers critically rely on high-quality optical coatings for the low-loss transport of cw and pulsed laser radiation. These coatings must exhibit exceptionally high quality regarding their material properties, defect class, and uniformity across large optical surfaces as well as high laser damage resistance. Fabrication and characterization of these coatings currently pose challenges that need to be addressed to enable demanding laser applications like advanced manufacturing, future inertial confinement fusion, and usage of directed energy for defense purposes. Therefore, coating research at LZH is currently focused on determining and increasing the cw and pulsed LIDT (laser-induced damage threshold) with innovative strategies for high-LIDT coatings and their characterization on optics with diameters up to 400 mm, as well as a novel concept to manufacture high-quality uniform coating of optics with diameters of up to two meters. This contribution will outline the current progress in these projects, featuring recent findings regarding optimized coating design approaches, as well as large-area coatings and LIDT metrology.
- 26 November 2025
- Published by Optica Publishing Group in Applied Optics
- Vol. 65 (5) , A147-A155
Optical interference coatings: measurement challenge 2025 [Invited]
The Optical Interference Coatings Measurement Challenge represents a distinctive occasion for the optical coatings community to benchmark and verify their test equipment and methodologies. In the 2025 Measurement Challenge, optical losses of high-reflecting mirrors (R>99.99%) for 1064 and 355 nm were to be determined.
- 26 November 2025
- Published by Optica Publishing Group in Applied Optics
- Vol. 65 (5) , A147-A155
Optical interference coatings: measurement challenge 2025 [Invited]
The Optical Interference Coatings Measurement Challenge represents a distinctive occasion for the optical coatings community to benchmark and verify their test equipment and methodologies. In the 2025 Measurement Challenge, optical losses of high-reflecting mirrors (R>99.99%) for 1064 and 355 nm were to be determined.
- 19 November 2025
- Published by Optica Publishing Group in Applied Optics
- Vol. 65 (5) , A130-A138
Investigating the impact of intermediate states in hafnia on nonlinear absorption
The trend of consistent increases in laser power is often limited by the laser-induced damage threshold (LIDT) of the optic. Existing models have shown a link between the nonlinearv ionization rate at high intensities and LIDT. These models are extended to account for the presence of intermediate states and compared to laser calorimetric absorption (LCA) measurements of samples prepared with varying densities of intermediate states. Hafnia is well established for use in high LIDT optics due to its large band gap and high refractive index; however, a number of defect states can be induced by oxygen sub- or super-stoichiometry. The extended model shows good correlation to measurements of samples prepared with different densities of intermediate states.
- 19 November 2025
- Published by Optica Publishing Group in Applied Optics
- Vol. 65 (5) , A130-A138
Investigating the impact of intermediate states in hafnia on nonlinear absorption
The trend of consistent increases in laser power is often limited by the laser-induced damage threshold (LIDT) of the optic. Existing models have shown a link between the nonlinearv ionization rate at high intensities and LIDT. These models are extended to account for the presence of intermediate states and compared to laser calorimetric absorption (LCA) measurements of samples prepared with varying densities of intermediate states. Hafnia is well established for use in high LIDT optics due to its large band gap and high refractive index; however, a number of defect states can be induced by oxygen sub- or super-stoichiometry. The extended model shows good correlation to measurements of samples prepared with different densities of intermediate states.
- 19 November 2025
- Published by Optica Publishing Group in Applied Optics
- Vol. 65 (5) , A139-A146
LIDT measurement routine to assist coating optimization studies of low defect density optics in the nanosecond pulse regime
A combined laser-induced damage threshold (LIDT) measurement routine is presented specifically for optics, which are subject of further optimization to nanosecond fusion laser optics. By extending a raster scan method with an R(S)-on-1 routine that has a last intact spot damage criterion, not only the current LIDT limited by the most critical defect is measured but also up to the intrinsic LIDT of the coating. This demonstrates how existing routines can be combined to distinguish between a defect-driven and an intrinsic damage threshold. During coating optimization studies, this allows to correlate specific coating process parameters directly to their influence on both the defect-driven and the intrinsic LIDT of the coating. A high-quality in situ microscopic imaging during the measurement routine is essential for the precise LIDT evaluation, and combined with high-precision ex situ measurement techniques, it allows an even more detailed investigation of participating damage mechanisms. An exemplary cross-sectional microstructure damage analysis showed that observed changes in color can be linked to a local delamination of the coatings top layer and a change in reflectivity.
- 19 November 2025
- Published by Optica Publishing Group in Applied Optics
- Vol. 65 (5) , A139-A146
LIDT measurement routine to assist coating optimization studies of low defect density optics in the nanosecond pulse regime
A combined laser-induced damage threshold (LIDT) measurement routine is presented specifically for optics, which are subject of further optimization to nanosecond fusion laser optics. By extending a raster scan method with an R(S)-on-1 routine that has a last intact spot damage criterion, not only the current LIDT limited by the most critical defect is measured but also up to the intrinsic LIDT of the coating. This demonstrates how existing routines can be combined to distinguish between a defect-driven and an intrinsic damage threshold. During coating optimization studies, this allows to correlate specific coating process parameters directly to their influence on both the defect-driven and the intrinsic LIDT of the coating. A high-quality in situ microscopic imaging during the measurement routine is essential for the precise LIDT evaluation, and combined with high-precision ex situ measurement techniques, it allows an even more detailed investigation of participating damage mechanisms. An exemplary cross-sectional microstructure damage analysis showed that observed changes in color can be linked to a local delamination of the coatings top layer and a change in reflectivity.
- Open Access
- 12 November 2025
- Published by IOP Publishing in Journal of Physics: Photonics
- Vol. 8 (1) , 015007
Efficient optical coating design using an autoencoder-based neural network model
Optical thin-film coatings are integral to modern photonics and in particular to ultrafast lasers, providing precise control of dispersion and reflectivity, thus enabling tailored pulse shaping. Designing these coatings represents an inverse problem, requiring the mapping of desired optical properties to physical designs, a task that poses major challenges for traditional heuristic methods, which often rely on time-consuming, expert-guided iteration and can be constrained by the choice of an initial starting point. Here, we present an artificial intelligence (AI) framework for optical thin-film coating design that accelerates the design process, achieving excellent performance characteristics without expert intervention. We discuss our AI approach and demonstrate the capabilities of our algorithm by designing a complex broadband high-reflectivity mirror with state-of-the-art performance characteristics including a − 200 fs 2 group delay dispersion covering a spectral range of 940 nm to 1120 nm.
- 12 November 2025
- Published by IOP Publishing in Journal of Physics: Photonics
- Vol. 8 (1) , 015007
Open AccessEfficient optical coating design using an autoencoder-based neural network model
Optical thin-film coatings are integral to modern photonics and in particular to ultrafast lasers, providing precise control of dispersion and reflectivity, thus enabling tailored pulse shaping. Designing these coatings represents an inverse problem, requiring the mapping of desired optical properties to physical designs, a task that poses major challenges for traditional heuristic methods, which often rely on time-consuming, expert-guided iteration and can be constrained by the choice of an initial starting point. Here, we present an artificial intelligence (AI) framework for optical thin-film coating design that accelerates the design process, achieving excellent performance characteristics without expert intervention. We discuss our AI approach and demonstrate the capabilities of our algorithm by designing a complex broadband high-reflectivity mirror with state-of-the-art performance characteristics including a − 200 fs 2 group delay dispersion covering a spectral range of 940 nm to 1120 nm.
- 6 November 2025
- Published by Optica Publishing Group in Applied Optics
- Vol. 65 (5) , A79-A86
Simulation of numerical optimizations to reduce the temperature shift of dielectric interference filters
A method of determining the thermal properties of optical thin-film filter materials from spectrophotometric measurements is proposed. Its feasibility is shown by extracting the material properties from simulated transmission spectra imprinted with real-world measurement errors. A Monte Carlo-based algorithm was implemented to optimize thin-film filter designs for thermal stability. This algorithm is used to explore the optimization possibilities of exemplary designs for differently behaving material combinations. It is demonstrated that designs can be optimized for use under different temperatures, where also the overall wavelength shift of a filter is modifiable.
- 6 November 2025
- Published by Optica Publishing Group in Applied Optics
- Vol. 65 (5) , A79-A86
Simulation of numerical optimizations to reduce the temperature shift of dielectric interference filters
A method of determining the thermal properties of optical thin-film filter materials from spectrophotometric measurements is proposed. Its feasibility is shown by extracting the material properties from simulated transmission spectra imprinted with real-world measurement errors. A Monte Carlo-based algorithm was implemented to optimize thin-film filter designs for thermal stability. This algorithm is used to explore the optimization possibilities of exemplary designs for differently behaving material combinations. It is demonstrated that designs can be optimized for use under different temperatures, where also the overall wavelength shift of a filter is modifiable.
- 21 October 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (22) , 45856-45868
Strip-loaded waveguides on thin-film lithium niobate realized via multi-photon lithography
Integrated photonics play a pivotal role in the advancement of photonic systems in the future. The key to this lies in the research and development of novel materials and fabrication techniques. Lithium niobate (LN) is a material of particular interest due to its advantageous second-order nonlinearity and electro-optical properties. Conventionally, LN waveguides have been fabricated through multi-step processes involving lithographic patterning and dry etching techniques, which are time-consuming and laborious. In this study, we demonstrate an etchless production approach for strip-loaded thin-film LN waveguides through multi-photon lithography. The propagation losses of the fabricated waveguides are as low as 0.15 dB/cm at a wavelength of 1550 nm, which is comparable to existing etching techniques. The manufacturing approach enables a significantly reduced production time and reuse of the thin-film LN substrate. Specifically, we demonstrate the capability of erasing and reprinting polymer strips, fostering a more sustainable practice in the development of LN-based photonic integrated circuits (PICs). The approach can be transferred to other thin-film platforms and enables easier access to waveguide development, which can propel material research in the context of PIC development.
- 21 October 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (22) , 45856-45868
Strip-loaded waveguides on thin-film lithium niobate realized via multi-photon lithography
Integrated photonics play a pivotal role in the advancement of photonic systems in the future. The key to this lies in the research and development of novel materials and fabrication techniques. Lithium niobate (LN) is a material of particular interest due to its advantageous second-order nonlinearity and electro-optical properties. Conventionally, LN waveguides have been fabricated through multi-step processes involving lithographic patterning and dry etching techniques, which are time-consuming and laborious. In this study, we demonstrate an etchless production approach for strip-loaded thin-film LN waveguides through multi-photon lithography. The propagation losses of the fabricated waveguides are as low as 0.15 dB/cm at a wavelength of 1550 nm, which is comparable to existing etching techniques. The manufacturing approach enables a significantly reduced production time and reuse of the thin-film LN substrate. Specifically, we demonstrate the capability of erasing and reprinting polymer strips, fostering a more sustainable practice in the development of LN-based photonic integrated circuits (PICs). The approach can be transferred to other thin-film platforms and enables easier access to waveguide development, which can propel material research in the context of PIC development.
- 13 September 2025
- Published by Elsevier in Surfaces and Interfaces
- Vol. 74
Optimizing large area homogeneity for Ion beam sputtering thin film deposition: A multifaceted approach
- 13 September 2025
- Published by Elsevier in Surfaces and Interfaces
- Vol. 74
Optimizing large area homogeneity for Ion beam sputtering thin film deposition: A multifaceted approach
- 11 June 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (12) , 26241-26256
Theoretical and experimental analysis of the stability of quantizing nanolaminates
Quantizing nanolaminates are an optical metamaterial that has been a prominent research topic in the community of thin film technology for several years. In previous works, the calculations for the theoretical description of the electronic properties were limited to a single quantum well with finite barriers, whereby interactions of several quantum wells or deviations of the potential form could not be taken into account. This paper presents a new theoretical foundation based on the matrix solution of the discretized Schrdinger equation, which allows the calculation of structures with up to 500 quantum wells and arbitrary potential shapes. Based on this model, the influence of the barrier thickness and the number of potential wells on the absorption edge of this metamaterial is analyzed. Furthermore, the influence of layer thickness errors is discussed and compared to experimental data. In addition, a study on the wavelength-dependent absorption as a function of the interfaces is presented. Lastly, future applications and further developments in coating technology for the efficient production of high-quality quantizing nanolaminate coatings are discussed.
- 11 June 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (12) , 26241-26256
Theoretical and experimental analysis of the stability of quantizing nanolaminates
Quantizing nanolaminates are an optical metamaterial that has been a prominent research topic in the community of thin film technology for several years. In previous works, the calculations for the theoretical description of the electronic properties were limited to a single quantum well with finite barriers, whereby interactions of several quantum wells or deviations of the potential form could not be taken into account. This paper presents a new theoretical foundation based on the matrix solution of the discretized Schrdinger equation, which allows the calculation of structures with up to 500 quantum wells and arbitrary potential shapes. Based on this model, the influence of the barrier thickness and the number of potential wells on the absorption edge of this metamaterial is analyzed. Furthermore, the influence of layer thickness errors is discussed and compared to experimental data. In addition, a study on the wavelength-dependent absorption as a function of the interfaces is presented. Lastly, future applications and further developments in coating technology for the efficient production of high-quality quantizing nanolaminate coatings are discussed.
- 19 March 2025
- Published by SPIE-Intl Soc Optical Eng
- Vol. 13382, 23-114
Miniaturized electro-optical modulator based on substrate-free thin films
We report on an integrable electro-optic modulator (EOM), exploiting the advantages of substrate-free thin film technology to achieve a small device footprint of less than 30µm along the beam propagation direction. By integrating an electrooptically active layer into a resonant Fabry-Perot (FP) structure with dielectric thin film mirrors, an EOM, which modulates the transmitted amplitude, is manufactured and characterized. We show results on electro-optically active polymers as the FP cavity material, which have revealed an electro-optic coefficient in the three-digit pm/V range at a wavelength of 980nm. Furthermore, we analyze the applicability of piezoelectric zinc oxide (ZnO) as the active layer material, which exhibits high transmission in the visible wavelength region. Fabrication of ZnO using magnetron sputtering under oblique angle deposition conditions has the potential to produce porous, inclined, crystalline thin films with an enhanced piezoelectric coefficient d33, which is otherwise only found in bulk ceramics like lead zirconate titanate. The use of such nanostructured ZnO thin films with an improved electro-mechanical coupling as active cavity layer fosters improved modulation while consuming less energy.
- 19 March 2025
- Published by SPIE-Intl Soc Optical Eng
- Vol. 13382, 23-114
Miniaturized electro-optical modulator based on substrate-free thin films
We report on an integrable electro-optic modulator (EOM), exploiting the advantages of substrate-free thin film technology to achieve a small device footprint of less than 30µm along the beam propagation direction. By integrating an electrooptically active layer into a resonant Fabry-Perot (FP) structure with dielectric thin film mirrors, an EOM, which modulates the transmitted amplitude, is manufactured and characterized. We show results on electro-optically active polymers as the FP cavity material, which have revealed an electro-optic coefficient in the three-digit pm/V range at a wavelength of 980nm. Furthermore, we analyze the applicability of piezoelectric zinc oxide (ZnO) as the active layer material, which exhibits high transmission in the visible wavelength region. Fabrication of ZnO using magnetron sputtering under oblique angle deposition conditions has the potential to produce porous, inclined, crystalline thin films with an enhanced piezoelectric coefficient d33, which is otherwise only found in bulk ceramics like lead zirconate titanate. The use of such nanostructured ZnO thin films with an improved electro-mechanical coupling as active cavity layer fosters improved modulation while consuming less energy.