BSBrad Songer

Brad Songer

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Brad Songer has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Laboratory Development and Characterization of UHPC for the Repair of Navigation Structures

    by Brad Songer, Dylan Scott, Stephanie Wood, Eric Hackbarth, Thomas Mack, Alexander Tillotson, Kirk Walker

    Many US Army Corps of Engineers (USACE) concrete navigation structures are currently functioning beyond their designed service lives and suffer from damage and deterioration along guide walls and lock chamber wall surfaces. External damage from vessel contact and internal concrete deterioration mechanisms, such as freeze-thaw cycling, often develop a synergetic relationship, compounding the deleterious effects on concrete. Efforts have been made to improve lock wall durability. Ultra High Performance Concrete (UHPC) is a viable material alternative for lock wall repair and rehabilitation. Its high strength and density contribute to superior resistance to impact and abrasion as well as moisture ingress and transport that drive common concrete deterioration mechanisms. UHPC panels can be made significantly thinner than ordinary concrete panels, will eliminate the need for external steel armoring, and will reduce the amount of required steel reinforcement, thereby simplifying design, installation, and maintenance requirements. It is expected that introducing precast UHPC panels as a repair material will ultimately result in longterm cost savings to USACE Districts. An ultra-high-performance concrete (UHPC) using locally sourced materials, referred to as Lock-Tuf, has been designed for use in a precast environment with ambient curing methods and serves as a material proof-of-concept for future lock wall rehabilitations. Mechanical properties such as unconfined compressive strength, flexural response, tensile capacity, impact resistance, and abrasion resistance have been quantified experimentally. Overall, Lock-Tuf performed as well as, or better than, proprietary UHPC in the test methods used in this study while meeting strength and durability requirements for the intended application.

  • Laboratory Curing Protocols to Replicate Thermomechanical Behavior of High-Strength Concrete in Mass Placements

    by Ashley S. Carey, Isaac L. Howard, Jay Shannon, Dylan A. Scott, Brad Songer

    This paper outlines a framework for a potential testing protocol in which specimens are cast following typical industry practices, cured following a specific combination of insulting blocks and variable temperature boundary conditions, and then tested to approximate in-place mechanical properties. Protocols to cure specimens following a time–temperature profile of a high-strength concrete mass placement were developed so that mechanical properties can be measured directly. Findings showed that laboratory equipment was capable of replicating time–temperature profiles of mass concrete structures, and one protocol was recommended for a specific set of conditions. This framework is envisioned to be the foundational component of a standard method in which in-place properties of mass high-strength concrete placements can be predicted by a commercial testing laboratory that already conducts standard concrete tests. Future work is needed to extrapolate the proposed framework for different mixtures, placement sizes, and insulation types; this paper validates that the framework is possible.


  • New Energy Dissipation Mechanisms for Steel Fiber Reinforcement in Ultra High-Performance Concrete

    by Dylan A. Scott, Bradford P. Songer, Robert D. Moser, Zackery B. McClelland, Brian H. Green, Charles A. Weiss

    This research focused on improving ultra high-performance concrete (UHPC) toughness through the addition of annealed plain carbon steel fibers and stainless steel fibers that both exhibit increased ductility and strain hardening compared with conventional steel fibers used for concrete reinforcement. Implementing optimized heat treatments and selecting proper alternative alloys can improve the postyield carrying capacity of UHPCs through plastic deformations, phase transformations, and fiber pullout. This research focused on the flexural response and dynamic penetration resistance of a UHPC known as Cor-Tuf with three different steel fiber types: plain carbon steel, stainless steel that can exhibit phase transformation-induced plasticity, and annealed carbon steel with reduced tensile strength but increased ductility and strain hardening. Annealed carbon steel fibers were able to reduce mass loss by 0.8 % for 5-cm-thick dynamic impact panels. By using a phase-transformable stainless steel, the ultimate flexural strength increased from 32.0 to 42.5 MPa (33 % increase) and the postimpact velocity decreased an average of 31.5 m/s for 2.5 and 5-cm-thick dynamic impact panels. Phase transformations (austenitic to martensitic) were quantified in the stainless steel fibers of postyielded UHPC specimens using a vibrating sample magnetometer. Stainless steel fibers sampled from the postyielded tensile face of a flexural beam increased from 75 to 107 emu/g. The results of the study evidence improvements in tensile properties and toughness that can be accomplished by modifying the stress versus strain response of steel fiber reinforcement and including new energy dissipation mechanisms such as phase transformation.