Masahiro Furutani
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Masahiro Furutani has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
Wataru Usui
Department of Chemistry and Biology, National Institute of Technology, Fukui College
3 shared publicationsChiharu Nishibata
Department of Chemistry and Biology, National Institute of Technology, Fukui College
2 shared publicationsMiku Matsui
Department of Chemistry and Biology, National Institute of Technology, Fukui College
2 shared publicationsArata Tanaka
Department of Chemistry and Biology, National Institute of Technology, Fukui College
1 shared publicationHayaka Oto
Department of Chemistry and Biology, National Institute of Technology, Fukui College
1 shared publicationHiromitsu Ando
Development Engineering Office, Mitsubishi Motors Corporation
1 shared publication
Latest Publications
- 31 July 2026
- Published by Technical Association of Photopolymers, Japan in Journal of Photopolymer Science and Technology
- Vol. 39 (3) , 171-176
Fabrication of Photo-adhesive Materials Using a Bifunctional Dipyridyl Disulfide-derived Methacryl Monomer and a Reducer
Dipyridyl disulfide moieties are featured as one of chemical components of adhesives. By adding a reducer to dipyridyl disulfide-containing adhesive materials, 2-mercaptopyridyl groups are generated in situ to interact strongly with metallic surfaces. A bifunctional methacryl monomer that has a dipyridyl disulfide moiety is mixed with 2-hydroxyethyl methacrylate, a photo-radical initiator, and dithiothreitol, which forms an adhesive layer after 2 J/cm2 of UV irradiation at a wavelength of 365 nm. Shear stress of 3.4-10.5 MPa is recorded as the maximum value, in the experiment using glass-glass and glass-metal photo-adhesive samples. XPS analysis reveals that a part of dipyridyl disulfide moieties is reduced by dithiothreitol, leading to adaptation via subsequent tautomerization for adherent surfaces.
- 31 July 2026
- Published by Technical Association of Photopolymers, Japan in Journal of Photopolymer Science and Technology
- Vol. 39 (3) , 171-176
Fabrication of Photo-adhesive Materials Using a Bifunctional Dipyridyl Disulfide-derived Methacryl Monomer and a Reducer
Dipyridyl disulfide moieties are featured as one of chemical components of adhesives. By adding a reducer to dipyridyl disulfide-containing adhesive materials, 2-mercaptopyridyl groups are generated in situ to interact strongly with metallic surfaces. A bifunctional methacryl monomer that has a dipyridyl disulfide moiety is mixed with 2-hydroxyethyl methacrylate, a photo-radical initiator, and dithiothreitol, which forms an adhesive layer after 2 J/cm2 of UV irradiation at a wavelength of 365 nm. Shear stress of 3.4-10.5 MPa is recorded as the maximum value, in the experiment using glass-glass and glass-metal photo-adhesive samples. XPS analysis reveals that a part of dipyridyl disulfide moieties is reduced by dithiothreitol, leading to adaptation via subsequent tautomerization for adherent surfaces.
- Open Access
- 24 June 2025
- Published by Technical Association of Photopolymers, Japan in Journal of Photopolymer Science and Technology
- Vol. 38 (3) , 169-172
Fabrication of a Methacrylic Photo-adhesive Material Incorporating Hydroxypyridyl Groups
For preparation of our all-purpose photo-adhesive material, a methacrylic monomer bearing a hydroxypyridyl group was synthesized. Hydroxypyridyl groups take keto-enol tautomerization reactions according to their micro-environments, and adaptation of the molecular structures for strong interaction (or adhesion) would be expected. A photo-adhesive material was fabricated with the methacrylic monomer, 2-hydroxyethyl methacrylate, and a radical photo-initiator. Photo-adhesion experiments were performed by 2 J/cm2 of UV irradiation (50 mW/cm2) at a wavelength of 365 nm, resulting in higher values of shear stress in cases adding the monomer. It was found that a hydroxypyridyl group of the monomer existed mainly in the keto isomer in a solution of UV-Vis spectral measurements. On the other hand, results on XPS measurements suggested that a part of hydroxypyridyl groups could exist as the enol isomer in the adhesive residue.
- 24 June 2025
- Published by Technical Association of Photopolymers, Japan in Journal of Photopolymer Science and Technology
- Vol. 38 (3) , 169-172
Open AccessFabrication of a Methacrylic Photo-adhesive Material Incorporating Hydroxypyridyl Groups
For preparation of our all-purpose photo-adhesive material, a methacrylic monomer bearing a hydroxypyridyl group was synthesized. Hydroxypyridyl groups take keto-enol tautomerization reactions according to their micro-environments, and adaptation of the molecular structures for strong interaction (or adhesion) would be expected. A photo-adhesive material was fabricated with the methacrylic monomer, 2-hydroxyethyl methacrylate, and a radical photo-initiator. Photo-adhesion experiments were performed by 2 J/cm2 of UV irradiation (50 mW/cm2) at a wavelength of 365 nm, resulting in higher values of shear stress in cases adding the monomer. It was found that a hydroxypyridyl group of the monomer existed mainly in the keto isomer in a solution of UV-Vis spectral measurements. On the other hand, results on XPS measurements suggested that a part of hydroxypyridyl groups could exist as the enol isomer in the adhesive residue.
- Open Access
- 25 December 2024
- Published by Technical Association of Photopolymers, Japan in Journal of Photopolymer Science and Technology
- Vol. 37 (6) , 567
Retraction of “Synthesis of Monomers Having a 2-Hydroxypyridyl Group and Their Application to Photo-adhesive Materials” [J. Photopolym. Sci. Technol., 36 (2023) 267-270]
The authors noticed that structures of monomers 1 and 2 were incorrect after published in J. Photopolym. Sci. Technol., 36 (2023) 267-270. The correct structure of 1 (having a 2-hydroxy or 2-chloropyridyl group) cannot be decided without additional analyses (Fig. 1). On the other hand, the correct structure of 2 is shown in Fig. 2, found after additional MS measurements. Thus, the authors decided to retract the paper. The authors regret any confusion that this issue causes and apologize to the scientific community.
- 25 December 2024
- Published by Technical Association of Photopolymers, Japan in Journal of Photopolymer Science and Technology
- Vol. 37 (6) , 567
Open AccessRetraction of “Synthesis of Monomers Having a 2-Hydroxypyridyl Group and Their Application to Photo-adhesive Materials” [J. Photopolym. Sci. Technol., 36 (2023) 267-270]
The authors noticed that structures of monomers 1 and 2 were incorrect after published in J. Photopolym. Sci. Technol., 36 (2023) 267-270. The correct structure of 1 (having a 2-hydroxy or 2-chloropyridyl group) cannot be decided without additional analyses (Fig. 1). On the other hand, the correct structure of 2 is shown in Fig. 2, found after additional MS measurements. Thus, the authors decided to retract the paper. The authors regret any confusion that this issue causes and apologize to the scientific community.
- Open Access
- 25 December 2024
- Published by Technical Association of Photopolymers, Japan in Journal of Photopolymer Science and Technology
- Vol. 37 (6) , 569-572
Synthesis of Methacryl Monomer Having a 6-Chloropyridyl Group and Their Application to Photo-adhesive Material
Photo-adhesive materials for adhesion between dissimilar materials have been desired in industrial manufacturing. We designed and synthesized a methacryl monomer having a 6-chloropyridyl group. A photo-adhesive material was prepared with the monomer, 2-hydroxyethyl methacrylate and a photo-radical initiator. Photo-adhesion was performed between a glass substrate and another substrate (glass, metals, and polymers), with 2 J/cm2 of UV irradiation at a wavelength of 365 nm. Shear stress of 5-12 MPa was recorded, which would result from formation of cured adhesive layer in a radical UV curing process. XPS spectral measurement in the N1s region showed that 6-chloropyridyl group would interact with copper surface through nitrogen atom of the pyridine ring.
- 25 December 2024
- Published by Technical Association of Photopolymers, Japan in Journal of Photopolymer Science and Technology
- Vol. 37 (6) , 569-572
Open AccessSynthesis of Methacryl Monomer Having a 6-Chloropyridyl Group and Their Application to Photo-adhesive Material
Photo-adhesive materials for adhesion between dissimilar materials have been desired in industrial manufacturing. We designed and synthesized a methacryl monomer having a 6-chloropyridyl group. A photo-adhesive material was prepared with the monomer, 2-hydroxyethyl methacrylate and a photo-radical initiator. Photo-adhesion was performed between a glass substrate and another substrate (glass, metals, and polymers), with 2 J/cm2 of UV irradiation at a wavelength of 365 nm. Shear stress of 5-12 MPa was recorded, which would result from formation of cured adhesive layer in a radical UV curing process. XPS spectral measurement in the N1s region showed that 6-chloropyridyl group would interact with copper surface through nitrogen atom of the pyridine ring.
- Open Access
- 15 June 2023
- Published by Technical Association of Photopolymers, Japan in Journal of Photopolymer Science and Technology
- Vol. 36 (5) , 267-270
Retraction: Synthesis of Monomers Having a 2-Hydroxypyridyl Group and Their Application to Photo-adhesive Materials
A novel photo-adhesive material containing 2-hydroxypyridyl groups was prepared with a radical photo-initiator and a methacryl monomer having a 2-hydroxypyridyl group. The methacryl monomer was obtained as a stable colorless liquid. It seemed that 2-hydroxypyridyl group of the methacryl monomer took mainly the ractim-type structure in solution, resulting from its tautomerization reaction. Photo-adhesion was achieved between a glass substrate and another one (glass or dissimilar materials), after 1 J/cm2 of UV irradiation at a wavelength of 365 nm. Shear stress up to 6.2 MPa was recorded, and thermal dismantlement of the sample was also observed. Furthermore, using residue of the adhesive layer on each substrate, re-adhesion was performed with gentle heating.
- 15 June 2023
- Published by Technical Association of Photopolymers, Japan in Journal of Photopolymer Science and Technology
- Vol. 36 (5) , 267-270
Open AccessRetraction: Synthesis of Monomers Having a 2-Hydroxypyridyl Group and Their Application to Photo-adhesive Materials
A novel photo-adhesive material containing 2-hydroxypyridyl groups was prepared with a radical photo-initiator and a methacryl monomer having a 2-hydroxypyridyl group. The methacryl monomer was obtained as a stable colorless liquid. It seemed that 2-hydroxypyridyl group of the methacryl monomer took mainly the ractim-type structure in solution, resulting from its tautomerization reaction. Photo-adhesion was achieved between a glass substrate and another one (glass or dissimilar materials), after 1 J/cm2 of UV irradiation at a wavelength of 365 nm. Shear stress up to 6.2 MPa was recorded, and thermal dismantlement of the sample was also observed. Furthermore, using residue of the adhesive layer on each substrate, re-adhesion was performed with gentle heating.
- Open Access
- 16 December 2022
- Published by Technical Association of Photopolymers, Japan in Journal of Photopolymer Science and Technology
- Vol. 35 (4) , 337-340
Synthesis of a Dipyridyl Disulfide Cross-linking Reagent and Its Application to Photo-adhesion of Dissimilar Materials
Photo-adhesion of dissimilar materials was performed by using a diacrylate cross-linking reagent containing a 2,2'-dipyridyl disulfide moiety. Cross-linking reagent designed in this work was purified by recrystallization. UV-cured films were fabricated with the cross-linking reagent, 4-hydroxybutyl acrylate and a radical photo-initiator. Hydrophilicity of the film surface seemed to be changed larger than that of control samples. In photo-adhesion experiments, 0.3-2.5 MPa of shear stress was recorded after 1 J/cm2 of UV irradiation at a wavelength of 365 nm. Remarkable improvement of adhesive strength was observed when copper adherends were used, suggesting interaction between copper surface and sulfur atoms of the dipyridyl disulfide moieties in the adhesive layer.
- 16 December 2022
- Published by Technical Association of Photopolymers, Japan in Journal of Photopolymer Science and Technology
- Vol. 35 (4) , 337-340
Open AccessSynthesis of a Dipyridyl Disulfide Cross-linking Reagent and Its Application to Photo-adhesion of Dissimilar Materials
Photo-adhesion of dissimilar materials was performed by using a diacrylate cross-linking reagent containing a 2,2'-dipyridyl disulfide moiety. Cross-linking reagent designed in this work was purified by recrystallization. UV-cured films were fabricated with the cross-linking reagent, 4-hydroxybutyl acrylate and a radical photo-initiator. Hydrophilicity of the film surface seemed to be changed larger than that of control samples. In photo-adhesion experiments, 0.3-2.5 MPa of shear stress was recorded after 1 J/cm2 of UV irradiation at a wavelength of 365 nm. Remarkable improvement of adhesive strength was observed when copper adherends were used, suggesting interaction between copper surface and sulfur atoms of the dipyridyl disulfide moieties in the adhesive layer.
- 27 May 2022
- Published by Springer Nature in Journal of Polymer Research
- Vol. 29 (6) , 1-6
Role of dipyridyl disulfide cross-linking moieties in an acrylate photo-adhesive material
- 27 May 2022
- Published by Springer Nature in Journal of Polymer Research
- Vol. 29 (6) , 1-6
Role of dipyridyl disulfide cross-linking moieties in an acrylate photo-adhesive material
- 11 June 2021
- Published by Technical Association of Photopolymers, Japan in Journal of Photopolymer Science and Technology
- Vol. 34 (5) , 529-532
Synthesis of Amino Acid-derived Curing Reagents Containing a Disulfide Bond and Their Application to Anionic UV Curing Materials
Anionic UV curing has been applied for many kinds of industrial resins, because it overcomes technical problems in conventional radical and cationic UV curing. In this study, a cystine-based latent curing reagent was designed, and synthesized from l- and d-cysteine. The reagents showed not only good solubility toward organic media, but also good thermal decomposition behavior in the presence of basic species. Using them with a photo-base generator and an epoxy resin having a disulfide bond, UV-cured films of B-to-3B grade of pencil-hardness were fabricated successfully, after 10 J/cm2 of 365 nm-light irradiation and subsequent heating at 120-160°C for 30 min. Furthermore, two glass substrates were adhered by using this anionic UV curing system, and 1.6-3.7 MPa of shear stress was recorded in the photo-adhesion and re-adhesion experiments.
- 11 June 2021
- Published by Technical Association of Photopolymers, Japan in Journal of Photopolymer Science and Technology
- Vol. 34 (5) , 529-532
Synthesis of Amino Acid-derived Curing Reagents Containing a Disulfide Bond and Their Application to Anionic UV Curing Materials
Anionic UV curing has been applied for many kinds of industrial resins, because it overcomes technical problems in conventional radical and cationic UV curing. In this study, a cystine-based latent curing reagent was designed, and synthesized from l- and d-cysteine. The reagents showed not only good solubility toward organic media, but also good thermal decomposition behavior in the presence of basic species. Using them with a photo-base generator and an epoxy resin having a disulfide bond, UV-cured films of B-to-3B grade of pencil-hardness were fabricated successfully, after 10 J/cm2 of 365 nm-light irradiation and subsequent heating at 120-160°C for 30 min. Furthermore, two glass substrates were adhered by using this anionic UV curing system, and 1.6-3.7 MPa of shear stress was recorded in the photo-adhesion and re-adhesion experiments.
- Open Access
- 1 January 2017
- Published by Technical Association of Photopolymers, Japan in Journal of Photopolymer Science and Technology
- Vol. 30 (3) , 271-273
Photosensitivity Characteristics of Novel Resists Consisting of a Photobase Generator and an Epoxy Resin
- 1 January 2017
- Published by Technical Association of Photopolymers, Japan in Journal of Photopolymer Science and Technology
- Vol. 30 (3) , 271-273
Open AccessPhotosensitivity Characteristics of Novel Resists Consisting of a Photobase Generator and an Epoxy Resin
- 15 May 2013
- Published by Oxford University Press (OUP) in Chemistry Letters
- Vol. 42 (6) , 601-603
Transformation of Gold(I)–cyclo[–Met–Met–] Complex Supramolecular Fibers into Aligned Gold Nanoparticles
- 15 May 2013
- Published by Oxford University Press (OUP) in Chemistry Letters
- Vol. 42 (6) , 601-603
Transformation of Gold(I)–cyclo[–Met–Met–] Complex Supramolecular Fibers into Aligned Gold Nanoparticles