Yunhuai Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yunhuai Zhang has a total of 78 co-authors. Here are the top co-authors by number of shared publications:
- Peng Xiao
College of Physics Chongqing University Chongqing China
9 shared publications Huihui Shi
College of Chemistry and Chemical Engineering, Chongqing University, Chongqing 401331, China
3 shared publicationsLu Huang
College of Chemistry and Chemical Engineering, Chongqing University, Chongqing 401331, China
3 shared publicationsPeng Xiao
College of Physics, Chongqing University, Chongqing 400044, China
3 shared publications- Xijun Wei
School of Materials and Chemistry Southwest University of Science and Technology Mianyang 621010 China
3 shared publications Yuli Xiong
College of Physics, Chongqing University, Chongqing, 401331, China
3 shared publications
Latest Publications
The Intrinsic Effect of Spontaneous Chemical Reduction on Phosphorus‐Doped Cobalt Toward Hydrazine Oxidation Reaction
Transition metals (TMs) have caught great attention as the promising electrocatalysts for hydrazine oxidation reaction (HzOR). However, the critical factor that determines the superior HzOR activity on TMs has not been understood in‐depth, which hampers the precise design for admirable electrocatalysts. Herein, phosphorus‐doped cobalt (P x /Co) have been designed and fabricated by a cyclic voltammetry (CV) approach to catalyze hydrazine oxidation. A spontaneous chemical reduction, which in situ recovers Co‐PO x to Co‐P x by hydrazine molecules has been confirmed in HzOR. A lower d band center and more charged Co sites in P x /Co was positively associated with a faster kinetics of spontaneous chemical reduction. We also found that the HzOR mechanism followed both the N─N bond breakage path and the traditional dehydrogenation path simultaneously on P x /Co in an alkaline environment. A rapid spontaneous chemical reduction was more inclined to drive the HzOR to proceed along N─N bond breakage path, which accelerated the HzOR kinetics and endowed the phosphorus‐doped cobalt with a higher electro‐catalytic performance. Our work provides a new perspective to understand the intrinsic correlation among the electronic state of active sites, the kinetics of spontaneous chemical reduction and the electro‐catalytic mechanism of HzOR on TMs.
The Intrinsic Effect of Spontaneous Chemical Reduction on Phosphorus‐Doped Cobalt Toward Hydrazine Oxidation Reaction
Transition metals (TMs) have caught great attention as the promising electrocatalysts for hydrazine oxidation reaction (HzOR). However, the critical factor that determines the superior HzOR activity on TMs has not been understood in‐depth, which hampers the precise design for admirable electrocatalysts. Herein, phosphorus‐doped cobalt (P x /Co) have been designed and fabricated by a cyclic voltammetry (CV) approach to catalyze hydrazine oxidation. A spontaneous chemical reduction, which in situ recovers Co‐PO x to Co‐P x by hydrazine molecules has been confirmed in HzOR. A lower d band center and more charged Co sites in P x /Co was positively associated with a faster kinetics of spontaneous chemical reduction. We also found that the HzOR mechanism followed both the N─N bond breakage path and the traditional dehydrogenation path simultaneously on P x /Co in an alkaline environment. A rapid spontaneous chemical reduction was more inclined to drive the HzOR to proceed along N─N bond breakage path, which accelerated the HzOR kinetics and endowed the phosphorus‐doped cobalt with a higher electro‐catalytic performance. Our work provides a new perspective to understand the intrinsic correlation among the electronic state of active sites, the kinetics of spontaneous chemical reduction and the electro‐catalytic mechanism of HzOR on TMs.
- 4 June 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 62 (54) , 13629-13633
Corrosion-assisted heterogeneous nucleation for CoNiFe layered double hydroxides toward high-current methanol oxidation
One-step corrosion-assisted nucleation of CoNiFe LDH electrodes enables ampere-level MOR as a promising alternative to OER with excellent stability.
- 4 June 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 62 (54) , 13629-13633
Corrosion-assisted heterogeneous nucleation for CoNiFe layered double hydroxides toward high-current methanol oxidation
One-step corrosion-assisted nucleation of CoNiFe LDH electrodes enables ampere-level MOR as a promising alternative to OER with excellent stability.
- 22 August 2025
- Published by Royal Society of Chemistry (RSC) in Inorganic Chemistry Frontiers
- Vol. 12 (24) , 8042-8054
Dual-functional zincophilic–hydrophobic interfacial layer enables highly stable Zn metal anodes
A zincophilic–hydrophobic STA-ZnO protective layer is in situ constructed on Zn surfaces to suppress water-induced side reactions and regulate Zn 2+ deposition behavior for achieving Zn anodes with high reversibility and stability.
- 22 August 2025
- Published by Royal Society of Chemistry (RSC) in Inorganic Chemistry Frontiers
- Vol. 12 (24) , 8042-8054
Dual-functional zincophilic–hydrophobic interfacial layer enables highly stable Zn metal anodes
A zincophilic–hydrophobic STA-ZnO protective layer is in situ constructed on Zn surfaces to suppress water-induced side reactions and regulate Zn 2+ deposition behavior for achieving Zn anodes with high reversibility and stability.
- Open Access
- 14 January 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 16 (7) , 3296-3306
Unravelling the pH-dependent mechanism of ferroelectric polarization on different dynamic pathways of photoelectrochemical water oxidation
Ferroelectric polarization is considered to be an effective strategy to improve the oxygen evolution reaction (OER) of photoelectrocatalysis. The primary challenge is to clarify how the polarization field controls the OER dynamic pathway at a molecular level. Here, electrochemical fingerprint tests were used, together with theoretical calculations, to systematically investigate the free energy change in oxo and hydroxyl intermediates on TiO2–BaTiO3 core–shell nanowires (BTO@TiO2) upon polarization in different pH environments. We demonstrate that the adsorbate evolution mechanism (AEM) dominated in acidic environments, and both positive and negative polarization resulted in a reduction in the oxo-free energy, which inhibited the reaction kinetics. In the oxide path mechanism (OPM) that occurs in alkaline conditions, the ferroelectric polarization exhibits repulsive adsorbate–adsorbate interaction for OH− coverage and free energy shift of the OH− groups. We elucidate that a weakly alkaline electrolyte is the optimal environment for ferroelectric polarization because the positive polarization promotes OH− coverage and facilitates reaction pathway transfer from AEM to OPM; therefore, BTO@TiO2 exhibited a record polarization enhancement to 0.52 mA cm−2 at 1.23 VRHE in pH = 11. This work provides a more accurate insight into the pH-dependent effect of ferroelectric polarization on the OER dynamic pathway than conventional models that are based solely on the regulation of band bending.
- 14 January 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 16 (7) , 3296-3306
Open AccessUnravelling the pH-dependent mechanism of ferroelectric polarization on different dynamic pathways of photoelectrochemical water oxidation
Ferroelectric polarization is considered to be an effective strategy to improve the oxygen evolution reaction (OER) of photoelectrocatalysis. The primary challenge is to clarify how the polarization field controls the OER dynamic pathway at a molecular level. Here, electrochemical fingerprint tests were used, together with theoretical calculations, to systematically investigate the free energy change in oxo and hydroxyl intermediates on TiO2–BaTiO3 core–shell nanowires (BTO@TiO2) upon polarization in different pH environments. We demonstrate that the adsorbate evolution mechanism (AEM) dominated in acidic environments, and both positive and negative polarization resulted in a reduction in the oxo-free energy, which inhibited the reaction kinetics. In the oxide path mechanism (OPM) that occurs in alkaline conditions, the ferroelectric polarization exhibits repulsive adsorbate–adsorbate interaction for OH− coverage and free energy shift of the OH− groups. We elucidate that a weakly alkaline electrolyte is the optimal environment for ferroelectric polarization because the positive polarization promotes OH− coverage and facilitates reaction pathway transfer from AEM to OPM; therefore, BTO@TiO2 exhibited a record polarization enhancement to 0.52 mA cm−2 at 1.23 VRHE in pH = 11. This work provides a more accurate insight into the pH-dependent effect of ferroelectric polarization on the OER dynamic pathway than conventional models that are based solely on the regulation of band bending.
- 1 March 2024
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 17 (9) , 2968-3003
Intrinsic carbon structure modification overcomes the challenge of potassium bond chemistry
The development of advanced anode materials to overcome the slow kinetic processes and severe volume expansion of potassium ion batteries (PIBs) is critical for their further application in large-scale energy storage. Carbon materials, with their low cost, superior electroconductibility, modifiability and flexibility, store potassium by the formation of potassium bonds through the process of K+ adsorption on their surfaces or insertion into their interlayers. Due to the large radius of K+ with slow reaction kinetics and poor cycling stability, it is difficult for carbon anodes to exhibit superior comprehensive potassium properties without modification. Therefore, the intrinsic structure modification of carbon materials to change the state of the potassium bond via heteroatom doping engineering has been widely applied. This modification can regulate the electronic structure and interface state by increasing active sites, increasing K+ adsorption energy, accelerating electron migration and K+ diffusion as well as accommodating the volume effect to improve potassium storage performance. This review not only summarizes the latest advancements of single/double/triple heteroatom-doping carbon materials in tunable design, controllable synthesis and electrochemical performance elevation, but also attempts to decipher the underlying potassium storage mechanism from the perspective of the potassium bond. Finally, critical issues, challenges, and perspectives are discussed to propose the future direction of heteroatom-doped carbon materials for state-of-the-art PIBs.
- 1 March 2024
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 17 (9) , 2968-3003
Intrinsic carbon structure modification overcomes the challenge of potassium bond chemistry
The development of advanced anode materials to overcome the slow kinetic processes and severe volume expansion of potassium ion batteries (PIBs) is critical for their further application in large-scale energy storage. Carbon materials, with their low cost, superior electroconductibility, modifiability and flexibility, store potassium by the formation of potassium bonds through the process of K+ adsorption on their surfaces or insertion into their interlayers. Due to the large radius of K+ with slow reaction kinetics and poor cycling stability, it is difficult for carbon anodes to exhibit superior comprehensive potassium properties without modification. Therefore, the intrinsic structure modification of carbon materials to change the state of the potassium bond via heteroatom doping engineering has been widely applied. This modification can regulate the electronic structure and interface state by increasing active sites, increasing K+ adsorption energy, accelerating electron migration and K+ diffusion as well as accommodating the volume effect to improve potassium storage performance. This review not only summarizes the latest advancements of single/double/triple heteroatom-doping carbon materials in tunable design, controllable synthesis and electrochemical performance elevation, but also attempts to decipher the underlying potassium storage mechanism from the perspective of the potassium bond. Finally, critical issues, challenges, and perspectives are discussed to propose the future direction of heteroatom-doped carbon materials for state-of-the-art PIBs.
- Open Access
- 17 November 2023
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 14 (47) , 13812-13824
Layered sodium titanate with a matched lattice: a single ion conductor in a solid-state sodium metal battery
The layered Na0.98Ti1.3O3 (NTO) sheet is matched with Na in the lattice, which behaves like a single ion conductor with a high ion transference number due to the weak interactions between the lamellar Na+ ions and unmoved anionic Ti–O–Ti layers in NTO.
- 17 November 2023
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 14 (47) , 13812-13824
Open AccessLayered sodium titanate with a matched lattice: a single ion conductor in a solid-state sodium metal battery
The layered Na0.98Ti1.3O3 (NTO) sheet is matched with Na in the lattice, which behaves like a single ion conductor with a high ion transference number due to the weak interactions between the lamellar Na+ ions and unmoved anionic Ti–O–Ti layers in NTO.
- 28 March 2023
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 641, 972-980
Single-atom Pt-CeO2/Co3O4 catalyst with ultra-low Pt loading and high performance for toluene removal
- 28 March 2023
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 641, 972-980
Single-atom Pt-CeO2/Co3O4 catalyst with ultra-low Pt loading and high performance for toluene removal
- 2 February 2023
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 59 (17) , 2429-2432
In situ electrochemical construction of Co/CoP crystalline-amorphous hetero-phase catalysts for highly efficient electrocatalytic hydrogen evolution
Herein we develop a facile, one-step electrochemical approach for the in situ construction of a Co/CoP crystalline-amorphous hetero-phase catalyst towards the hydrogen evolution reaction (HER). The unique catalyst demonstrates a low overpotential of 83 mV at 10 mA cm−2 with a small Tafel slope of 55.3 mV dec−1 in 1.0 M KOH. The Co/CoP crystalline-amorphous hetero-phase is highly conducive to regulating the Co–P electronic structure and weakening the H atom adsorption, thus markedly boosting the HER performance. This work offers an innovative strategy to develop a highly efficient transition metal phosphide electrocatalyst with a novel structure.
- 2 February 2023
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 59 (17) , 2429-2432
In situ electrochemical construction of Co/CoP crystalline-amorphous hetero-phase catalysts for highly efficient electrocatalytic hydrogen evolution
Herein we develop a facile, one-step electrochemical approach for the in situ construction of a Co/CoP crystalline-amorphous hetero-phase catalyst towards the hydrogen evolution reaction (HER). The unique catalyst demonstrates a low overpotential of 83 mV at 10 mA cm−2 with a small Tafel slope of 55.3 mV dec−1 in 1.0 M KOH. The Co/CoP crystalline-amorphous hetero-phase is highly conducive to regulating the Co–P electronic structure and weakening the H atom adsorption, thus markedly boosting the HER performance. This work offers an innovative strategy to develop a highly efficient transition metal phosphide electrocatalyst with a novel structure.
- 1 February 2023
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 15 (9) , 4536-4545
Manipulating the surface states of BiVO4through electrochemical reduction for enhanced PEC water oxidation
Bismuth vanadate (BiVO4) is a prospective candidate for photoelectrochemical (PEC) water oxidation, but its commercial application is limited due to the serious surface charge recombination. In this work, we propose a novel and effective electrochemical reduction strategy combined with co-catalyst modification to manipulate the surface states of the BiVO4 photoanode. Specifically, an ultrathin amorphous structure is formed on the surface of BiVO4 after electrochemical reduction ascribed to the breaking of the surface metal–O bonds. Photoelectrochemical measurements and first-principles calculation show that the electrochemical reduction treatment can effectively reduce the surface energy, thereby passivating the recombined surface states (r-ss) and increasing the mobility of photogenerated holes. In addition, the FeOOH co-catalyst layer further increases the intermediate surface states (i-ss) of BiVO4, stabilizes the surface structure and enhances its PEC performance. Benefiting from the superior charge transfer efficiency and the excellent water oxidation kinetics, the −0.8/BVO/Fe photoanode achieves 2.02 mA cm−2 photocurrent at 1.23 VRHE (2.4 times that of the original BiVO4); meanwhile, the onset potential shifts 90 mV to the cathode. These results provide a new surface engineering tactic to modify the surface states of semiconductor photoanodes for high-efficiency PEC water oxidation.
- 1 February 2023
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 15 (9) , 4536-4545
Manipulating the surface states of BiVO4through electrochemical reduction for enhanced PEC water oxidation
Bismuth vanadate (BiVO4) is a prospective candidate for photoelectrochemical (PEC) water oxidation, but its commercial application is limited due to the serious surface charge recombination. In this work, we propose a novel and effective electrochemical reduction strategy combined with co-catalyst modification to manipulate the surface states of the BiVO4 photoanode. Specifically, an ultrathin amorphous structure is formed on the surface of BiVO4 after electrochemical reduction ascribed to the breaking of the surface metal–O bonds. Photoelectrochemical measurements and first-principles calculation show that the electrochemical reduction treatment can effectively reduce the surface energy, thereby passivating the recombined surface states (r-ss) and increasing the mobility of photogenerated holes. In addition, the FeOOH co-catalyst layer further increases the intermediate surface states (i-ss) of BiVO4, stabilizes the surface structure and enhances its PEC performance. Benefiting from the superior charge transfer efficiency and the excellent water oxidation kinetics, the −0.8/BVO/Fe photoanode achieves 2.02 mA cm−2 photocurrent at 1.23 VRHE (2.4 times that of the original BiVO4); meanwhile, the onset potential shifts 90 mV to the cathode. These results provide a new surface engineering tactic to modify the surface states of semiconductor photoanodes for high-efficiency PEC water oxidation.