Milena Golofit-Stawinska
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Milena Golofit-Stawinska has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Krzysztof Zboinski
Faculty of Transport, Warsaw University of Technology, 00-662 Warsaw, Poland
8 shared publications - Mirosław Dusza
Faculty of Transport, Warsaw University of Technology, 00-662 Warsaw, Poland
2 shared publications - Agnieszka Skala
Faculty of Management, Warsaw University of Technology, 00-661 Warsaw, Poland
1 shared publication - Bartlomiej Gladysz
Warsaw University of Technology
1 shared publication - Hubert Dyba
Department in Szczecin, West Pomeranian Business School, 71-210 Szczecin, Poland
1 shared publication - Jacek Kukulski
Faculty of Transport, Warsaw University of Technology, 00-662 Warsaw, Poland
1 shared publication
Latest Publications
- Open Access
- 30 October 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (21) , 11628
Nonlinear Features of Railway Vehicles in Motion on a Transition Curve with Velocities Around Critical in the Context of Motion Conditions
This paper presents numerical simulation results on the nonlinear features of railway vehicles moving in transition curves at velocities close to the critical velocity. It examines six objects representing railway vehicles: three 2-axle bogies, two 2-axle freight cars, and a 4-axle passenger car. The paper aims to show how systematic variation in motion conditions, such as initial conditions, vehicle velocity, and curve radius, influences nonlinear features of the vehicle’s dynamics. Results indicate that initial conditions do not affect stable solutions, increasing velocity leads to more systematic patterns of behaviour across straight, circular, and transition curves, while increasing curve radius leads to a partly systematised picture of solutions. The findings also emphasise certain exceptions to these general trends.
- 30 October 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (21) , 11628
Open AccessNonlinear Features of Railway Vehicles in Motion on a Transition Curve with Velocities Around Critical in the Context of Motion Conditions
This paper presents numerical simulation results on the nonlinear features of railway vehicles moving in transition curves at velocities close to the critical velocity. It examines six objects representing railway vehicles: three 2-axle bogies, two 2-axle freight cars, and a 4-axle passenger car. The paper aims to show how systematic variation in motion conditions, such as initial conditions, vehicle velocity, and curve radius, influences nonlinear features of the vehicle’s dynamics. Results indicate that initial conditions do not affect stable solutions, increasing velocity leads to more systematic patterns of behaviour across straight, circular, and transition curves, while increasing curve radius leads to a partly systematised picture of solutions. The findings also emphasise certain exceptions to these general trends.
- Open Access
- 29 October 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (21) , 9618
Financing and Business Model Archetypes as Predictors of Early Survival in European Sustainable Startups
Early survival is critical for sustainable startups to deliver environmental and social value, yet evidence on its predictors is limited. Drawing on resource-based and institutional perspectives, this study examines 140 university-affiliated green startups from 24 European countries in the “Stage Two” finals (2021–2023). Exploratory logistic regression links survival to financing structure, sustainable business-model archetypes, and public visibility. Non-equity grants and awards emerge as the strongest predictor, with equity capital and a Crunchbase profile adding smaller benefits. Economic-value archetypes outperform purely environmental or social ones, while technology-intensive B2B firms show the highest resilience. By combining resource sufficiency with legitimacy signaling, the study advances sustainable entrepreneurship theory and offers practical levers: mission-aligned grants, credible digital footprints, and archetype-specific funding strategies to support founders, investors, and policymakers in strengthening Europe’s sustainability-driven startup ecosystem.
- 29 October 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (21) , 9618
Open AccessFinancing and Business Model Archetypes as Predictors of Early Survival in European Sustainable Startups
Early survival is critical for sustainable startups to deliver environmental and social value, yet evidence on its predictors is limited. Drawing on resource-based and institutional perspectives, this study examines 140 university-affiliated green startups from 24 European countries in the “Stage Two” finals (2021–2023). Exploratory logistic regression links survival to financing structure, sustainable business-model archetypes, and public visibility. Non-equity grants and awards emerge as the strongest predictor, with equity capital and a Crunchbase profile adding smaller benefits. Economic-value archetypes outperform purely environmental or social ones, while technology-intensive B2B firms show the highest resilience. By combining resource sufficiency with legitimacy signaling, the study advances sustainable entrepreneurship theory and offers practical levers: mission-aligned grants, credible digital footprints, and archetype-specific funding strategies to support founders, investors, and policymakers in strengthening Europe’s sustainability-driven startup ecosystem.
- Open Access
- 2 October 2025
- Published by MDPI AG in Preprints.org
Nonlinear Features of Railway Vehicles in Motion on a Transition Curve with Velocities Around Critical in the Context of Motion Conditions
This paper presents numerical simulation results on the nonlinear features of railway vehicles moving in transition curves at velocities close to the critical velocity. It examines six objects representing railway vehicles: three 2-axle bogies, two 2-axle freight cars, and a 4-axle passenger car. The paper aims to show how systematic variation of motion conditions, such as initial conditions, vehicle velocity, and curve radius, influences nonlinear features of the vehicle’s dynamics. Results indicate that initial conditions do not affect stable solutions, increasing velocity leads to more systematic patterns of behaviour across straight, circular, and transition curves, while increasing curve radius leads to a partly systematised picture of solutions. The findings also emphasise certain exceptions to these general trends.
- 2 October 2025
- Published by MDPI AG in Preprints.org
Open AccessNonlinear Features of Railway Vehicles in Motion on a Transition Curve with Velocities Around Critical in the Context of Motion Conditions
This paper presents numerical simulation results on the nonlinear features of railway vehicles moving in transition curves at velocities close to the critical velocity. It examines six objects representing railway vehicles: three 2-axle bogies, two 2-axle freight cars, and a 4-axle passenger car. The paper aims to show how systematic variation of motion conditions, such as initial conditions, vehicle velocity, and curve radius, influences nonlinear features of the vehicle’s dynamics. Results indicate that initial conditions do not affect stable solutions, increasing velocity leads to more systematic patterns of behaviour across straight, circular, and transition curves, while increasing curve radius leads to a partly systematised picture of solutions. The findings also emphasise certain exceptions to these general trends.
- Open Access
- 17 June 2025
- Published by Polish Academy of Sciences Chancellery in Archives of Civil Engineering
- p. 177-192
The influence of worn and nominal rail profiles on railway vehicle motion and dynamics
In this study the rail wear influence on safety of rail vehicle motion is assessed. The profile measurements for the nominal rail head and for the slightly worn and heavily worn rail heads were performed. Then, these measured real values were entered into a computer program designed to study the motion (dynamics) of rail vehicles. The studied model of passenger vehicle moved in simulations along a track consisting of straight and curved sections with transition curve between them at two velocities. After obtaining the simulation results, they were compared for different stages of the rail wear process based on profile measurement results and the suitability of the track was assessed, too. The aim of present paper was to show that extension of the traditional approach with the simulation studies of vehicle motion and dynamics leads to different and much more precise information about the need of the rails replacement. The proposed idea and approach in the current work is original and not used in practice by the track infrastructure operators.
- 17 June 2025
- Published by Polish Academy of Sciences Chancellery in Archives of Civil Engineering
- p. 177-192
Open AccessThe influence of worn and nominal rail profiles on railway vehicle motion and dynamics
In this study the rail wear influence on safety of rail vehicle motion is assessed. The profile measurements for the nominal rail head and for the slightly worn and heavily worn rail heads were performed. Then, these measured real values were entered into a computer program designed to study the motion (dynamics) of rail vehicles. The studied model of passenger vehicle moved in simulations along a track consisting of straight and curved sections with transition curve between them at two velocities. After obtaining the simulation results, they were compared for different stages of the rail wear process based on profile measurement results and the suitability of the track was assessed, too. The aim of present paper was to show that extension of the traditional approach with the simulation studies of vehicle motion and dynamics leads to different and much more precise information about the need of the rails replacement. The proposed idea and approach in the current work is original and not used in practice by the track infrastructure operators.
- Open Access
- 25 May 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (11) , 4545
The Nonlinear Lateral Stability of a Four-Axle Freight Car with Y25 Bogies and Measures to Improve Its Faults
This paper presents investigations of rail vehicle bogies of the Y25 type. The Y25 bogie family is one of the most commonly used freight car bogie designs. In addition to several significant advantages characterising this design, several disadvantages have also been observed since the beginning of more than fifty years of its operation in several types of cargo vehicles. One of these defects observed in real systems is its “unsatisfactory running stability”, particularly for long straight tracks. This paper used the commercial engineering software VI-Rail (2010.13.0) to create a model of a gondola car (type 412W Eaos) with two Y25 bogies. The car model was tested in empty and loaded (maximum permissible load) modes. Its motion along straight and curved tracks with different radii values was analysed. The vehicle velocity was changed from a few m/s to the maximum values for which stable solutions of the model existed. For each route, the nonlinear critical velocity was determined, defining the maximum operating velocity of the modelled car. The model solutions were recorded, while just one was selected to present the results—the first wheelset’s lateral displacement ylw. Conjecture about its “imperfect running quality” on curved tracks was confirmed. The possible appearance of self-exciting wheelset vibrations in the modelled car’s operating velocity range in a laden state was also observed. The research results on the impact of changes in the bogie suspension parameters on the vehicle model’s stability are presented. The crucial parameter in the bogie suspension was indicated. Reducing its value by several percent about the nominal value increases the critical velocity of the car to values higher than the maximum operating velocity of the modelled vehicle.
- 25 May 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (11) , 4545
Open AccessThe Nonlinear Lateral Stability of a Four-Axle Freight Car with Y25 Bogies and Measures to Improve Its Faults
This paper presents investigations of rail vehicle bogies of the Y25 type. The Y25 bogie family is one of the most commonly used freight car bogie designs. In addition to several significant advantages characterising this design, several disadvantages have also been observed since the beginning of more than fifty years of its operation in several types of cargo vehicles. One of these defects observed in real systems is its “unsatisfactory running stability”, particularly for long straight tracks. This paper used the commercial engineering software VI-Rail (2010.13.0) to create a model of a gondola car (type 412W Eaos) with two Y25 bogies. The car model was tested in empty and loaded (maximum permissible load) modes. Its motion along straight and curved tracks with different radii values was analysed. The vehicle velocity was changed from a few m/s to the maximum values for which stable solutions of the model existed. For each route, the nonlinear critical velocity was determined, defining the maximum operating velocity of the modelled car. The model solutions were recorded, while just one was selected to present the results—the first wheelset’s lateral displacement ylw. Conjecture about its “imperfect running quality” on curved tracks was confirmed. The possible appearance of self-exciting wheelset vibrations in the modelled car’s operating velocity range in a laden state was also observed. The research results on the impact of changes in the bogie suspension parameters on the vehicle model’s stability are presented. The crucial parameter in the bogie suspension was indicated. Reducing its value by several percent about the nominal value increases the critical velocity of the car to values higher than the maximum operating velocity of the modelled vehicle.
- Open Access
- 17 April 2024
- Published by MDPI AG in Preprints.org
Nonlinear Lateral Stability of 4-Axle Freight Car with the Y25 Bogies and the Measures to Improve Its Faults
The article presents investigations of rail vehicle bogie of Y25 type. The Y25 bogie family is one of the most commonly used freight car bogie designs. In addition to several significant advantages characterising this design, it also has several disadvantages observed since the beginning of more than fifty years of operation in several types of cargo vehicles. One of these defects observed in real systems is "unsatisfactory running stability", particularly at long straight tracks. The article used commercial engineering software VI-Rail to create a model of the gondola car (type 412W Eaos) with two Y25 bogies. The car model was tested empty and loaded (maximum permissible load). Motion along straight and curved tracks with different radii values was analysed. The vehicle velocity was changed from a few m/s to the maximum values for which stable solutions of the model existed. For each route, a non-linear critical velocity was determined, defining the maximum operating velocity of the modelled car. The model solutions were recorded, while just one was selected to present the results - the first wheelset lateral displacement ylw. The opinion about the "imperfect running quality" in curved tracks was confirmed. The possible appearance of self-exciting wheelset vibrations in the modelled car's operating velocity range in the laden state was also observed. The research results on the impact of the bogie suspension parameters change on the vehicle model stability are presented. The crucial parameter in the bogie suspension was indicated. Reducing its value by several percent about the nominal value increases the critical velocity of the car to values higher than the maximum operating velocity of the modelled vehicle.
- 17 April 2024
- Published by MDPI AG in Preprints.org
Open AccessNonlinear Lateral Stability of 4-Axle Freight Car with the Y25 Bogies and the Measures to Improve Its Faults
The article presents investigations of rail vehicle bogie of Y25 type. The Y25 bogie family is one of the most commonly used freight car bogie designs. In addition to several significant advantages characterising this design, it also has several disadvantages observed since the beginning of more than fifty years of operation in several types of cargo vehicles. One of these defects observed in real systems is "unsatisfactory running stability", particularly at long straight tracks. The article used commercial engineering software VI-Rail to create a model of the gondola car (type 412W Eaos) with two Y25 bogies. The car model was tested empty and loaded (maximum permissible load). Motion along straight and curved tracks with different radii values was analysed. The vehicle velocity was changed from a few m/s to the maximum values for which stable solutions of the model existed. For each route, a non-linear critical velocity was determined, defining the maximum operating velocity of the modelled car. The model solutions were recorded, while just one was selected to present the results - the first wheelset lateral displacement ylw. The opinion about the "imperfect running quality" in curved tracks was confirmed. The possible appearance of self-exciting wheelset vibrations in the modelled car's operating velocity range in the laden state was also observed. The research results on the impact of the bogie suspension parameters change on the vehicle model stability are presented. The crucial parameter in the bogie suspension was indicated. Reducing its value by several percent about the nominal value increases the critical velocity of the car to values higher than the maximum operating velocity of the modelled vehicle.
- Open Access
Dynamics of a Rail Vehicle in Transition Curve above Critical Velocity with Focus on Hunting Motion Considering the Review of History of the Stability Studies
The most general purpose of the current paper is to trace and discuss the history and state of the art of studies on vehicle motion (dynamics) in a transition curve above the critical velocity, with the aim of potentially increasing the circle of researchers involved in studying this issue and strengthening the will of the authors to continue their studies. This general goal is achieved in two ways: first, through a profiled literature analysis, showing the historical progress and current state of the research; and second, through reference to the history of stability studies as an example of selected studies’ development. In addition, this work has two more specific goals. Together, they consist of collecting the literature in a related field in one place and analyzing it on site to accomplish the review. Both specific goals are attained by dividing the literature into two corresponding parts. In the first part, the current issues of rail vehicle stability are analyzed and divided into four problems. The second part includes works that deal with the subject of the motion and dynamics of a rail vehicle on a transition curve section. Here, the works are divided into five groups and discussed. They are put in order from the closest to the furthest from this paper’s main subject; however, the last group includes the most recent references. In addition, information on the authors’ approach to the problem is provided, including the methods and models used, as well as example results. Based on the analysis of the literature and the state of the art, a summary of the analysis is presented at this paper’s end. It highlights the small number of works on the subject of interest, and based on the review of stability studies, it seeks to encourage present and potential authors to study this field and share their results with society.
Open AccessDynamics of a Rail Vehicle in Transition Curve above Critical Velocity with Focus on Hunting Motion Considering the Review of History of the Stability Studies
The most general purpose of the current paper is to trace and discuss the history and state of the art of studies on vehicle motion (dynamics) in a transition curve above the critical velocity, with the aim of potentially increasing the circle of researchers involved in studying this issue and strengthening the will of the authors to continue their studies. This general goal is achieved in two ways: first, through a profiled literature analysis, showing the historical progress and current state of the research; and second, through reference to the history of stability studies as an example of selected studies’ development. In addition, this work has two more specific goals. Together, they consist of collecting the literature in a related field in one place and analyzing it on site to accomplish the review. Both specific goals are attained by dividing the literature into two corresponding parts. In the first part, the current issues of rail vehicle stability are analyzed and divided into four problems. The second part includes works that deal with the subject of the motion and dynamics of a rail vehicle on a transition curve section. Here, the works are divided into five groups and discussed. They are put in order from the closest to the furthest from this paper’s main subject; however, the last group includes the most recent references. In addition, information on the authors’ approach to the problem is provided, including the methods and models used, as well as example results. Based on the analysis of the literature and the state of the art, a summary of the analysis is presented at this paper’s end. It highlights the small number of works on the subject of interest, and based on the review of stability studies, it seeks to encourage present and potential authors to study this field and share their results with society.
- Open Access
- 29 May 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (11) , 6649
Determination and Comparative Analysis of Critical Velocity for Five Objects of Railway Vehicle Class
The purpose of this article is to determine the critical velocities for five railway vehicle objects and to find possible generalizations of these results. It is done in the context of increasing the safety of travel on modern railways. The article discusses four methods of determining these velocities, and then the results obtained, mainly using one of the methods, are presented in tabular and graphical form. The chosen method is supplemented with the second one when higher accuracy or certainty is necessary. Finally, the results are discussed and the similarities and differences between them for different groups of railway vehicle class objects are shown.
- 29 May 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (11) , 6649
Open AccessDetermination and Comparative Analysis of Critical Velocity for Five Objects of Railway Vehicle Class
The purpose of this article is to determine the critical velocities for five railway vehicle objects and to find possible generalizations of these results. It is done in the context of increasing the safety of travel on modern railways. The article discusses four methods of determining these velocities, and then the results obtained, mainly using one of the methods, are presented in tabular and graphical form. The chosen method is supplemented with the second one when higher accuracy or certainty is necessary. Finally, the results are discussed and the similarities and differences between them for different groups of railway vehicle class objects are shown.
- Open Access
- 25 October 2019
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 98 (3) , 1555-1601
Investigation into nonlinear phenomena for various railway vehicles in transition curves at velocities close to critical one
In this paper recent simulation results aimed at studying nonlinear phenomena that accompany motion of railway vehicle in transition curve at velocities around the vehicle critical velocity are presented by the authors. Such results concern six different objects representing railway vehicles. These are: three 2-axle railway bogies, two 2-axle railway cars, and 4-axle railway car. The paper attention is devoted to presenting as many different nonlinear behaviours of the studied objects as possible. This is done first of all to give an idea to the readers of great number of the nonlinear behaviour types that can appear for railway vehicles in transition curves at velocities lower and bigger than vehicle critical velocity. The differences arising from specificity of particular objects are highlighted while systematic variation of the system parameters in order to study influence of such variation on differences in the behaviour is less represented. The paper ends with the comprehensive comments by the authors to the results obtained.
- 25 October 2019
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 98 (3) , 1555-1601
Open AccessInvestigation into nonlinear phenomena for various railway vehicles in transition curves at velocities close to critical one
In this paper recent simulation results aimed at studying nonlinear phenomena that accompany motion of railway vehicle in transition curve at velocities around the vehicle critical velocity are presented by the authors. Such results concern six different objects representing railway vehicles. These are: three 2-axle railway bogies, two 2-axle railway cars, and 4-axle railway car. The paper attention is devoted to presenting as many different nonlinear behaviours of the studied objects as possible. This is done first of all to give an idea to the readers of great number of the nonlinear behaviour types that can appear for railway vehicles in transition curves at velocities lower and bigger than vehicle critical velocity. The differences arising from specificity of particular objects are highlighted while systematic variation of the system parameters in order to study influence of such variation on differences in the behaviour is less represented. The paper ends with the comprehensive comments by the authors to the results obtained.