Sigit Pramono
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sigit Pramono has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
Gunawan Wibisono
Institut Teknologi Telkom Purwokerto
1 shared publicationJhon Bryan Tarihoran
Institut Teknologi Telkom Purwokerto
1 shared publication- Merlinda Wibowo
Institut Teknologi Telkom Purwokerto, Purwokerto
1 shared publication Nicolaus Euclides Wahyu Nugroho
Institut Teknologi Telkom Purwokerto, Purwokerto
1 shared publicationNur Ghaniaviyanto Ramadhan
Institut Teknologi Telkom Purwokerto
1 shared publicationPrasetyo Yuliantoro
Institut Teknologi Telkom Purwokerto, Banyumas
1 shared publication
Latest Publications
- Open Access
- 24 March 2023
- Published by Universitas Jenderal Soedirman in Dinamika Rekayasa
- Vol. 19 (1) , 37-44
Implementasi Moving Average Filter untuk Sensor Tegangan pada Sistem Kontrol dan Monitoring Lampu Jalan
Perkembangan teknologi saat ini mampu memanfaatkan infrastruktur yang ada sebagai jalur komunikasi. Power line Carrier (PLC) adalah teknologi komunikasi data yang dilakukan melalui kabel listrik. Penerangan jalan yang baik memegang peranan penting terutama pada kondisi malam hari. Penerangan jalan ini berguna untuk menciptakan kondisi jalan yang terang. Untuk memudahkan pengguna mengontrol lampu jalan dan memonitoring lampu dari jarak jauh maka dibuat peralatan untuk mengontrol dan memonitoring lampu melalui PLC. Tujuan dari penelitian ini adalah pengujian sensor tegangan dengan menggunakan Moving Average Filter(MAF) dengan menggunakan PLC pada sistem kontrol dan monitoring lampu jalan dan mengukur kinerja sensor tegangan ZMPT101B menggunakan Moving Average Filter. Sistem yang dirancang memiliki 2 perangkat utama yaitu perangkat kontrol dan sensor lampu kemudian terdapat juga perangkat yang digunakan untuk melakukan monitoring dengan menggunakan display LCD 16x2. Nilai rata-rata persentase error dari keseluruhan nilai tegangan yaitu ketika pembacaan tanpa menggunakan MAF memiliki niliai rata-rata error sebesar 0.38%, kemudian ketika menggunakan MAF 5 persentase error turun menjadi 0.18% dan MAF 10 menghasilkan nilai yang terbaik dengan rata-rata error sebesar 0.14%. Penggunaan filter MAF 10 menghasilkan grafik yang lebih stabil dibandingkan dengan tidak menggunakan filter MAF.
- 24 March 2023
- Published by Universitas Jenderal Soedirman in Dinamika Rekayasa
- Vol. 19 (1) , 37-44
Open AccessImplementasi Moving Average Filter untuk Sensor Tegangan pada Sistem Kontrol dan Monitoring Lampu Jalan
Perkembangan teknologi saat ini mampu memanfaatkan infrastruktur yang ada sebagai jalur komunikasi. Power line Carrier (PLC) adalah teknologi komunikasi data yang dilakukan melalui kabel listrik. Penerangan jalan yang baik memegang peranan penting terutama pada kondisi malam hari. Penerangan jalan ini berguna untuk menciptakan kondisi jalan yang terang. Untuk memudahkan pengguna mengontrol lampu jalan dan memonitoring lampu dari jarak jauh maka dibuat peralatan untuk mengontrol dan memonitoring lampu melalui PLC. Tujuan dari penelitian ini adalah pengujian sensor tegangan dengan menggunakan Moving Average Filter(MAF) dengan menggunakan PLC pada sistem kontrol dan monitoring lampu jalan dan mengukur kinerja sensor tegangan ZMPT101B menggunakan Moving Average Filter. Sistem yang dirancang memiliki 2 perangkat utama yaitu perangkat kontrol dan sensor lampu kemudian terdapat juga perangkat yang digunakan untuk melakukan monitoring dengan menggunakan display LCD 16x2. Nilai rata-rata persentase error dari keseluruhan nilai tegangan yaitu ketika pembacaan tanpa menggunakan MAF memiliki niliai rata-rata error sebesar 0.38%, kemudian ketika menggunakan MAF 5 persentase error turun menjadi 0.18% dan MAF 10 menghasilkan nilai yang terbaik dengan rata-rata error sebesar 0.14%. Penggunaan filter MAF 10 menghasilkan grafik yang lebih stabil dibandingkan dengan tidak menggunakan filter MAF.
- Open Access
- 30 December 2022
- Published by Forum Kerjasama Pendidikan Tinggi (FKPT) in Building of Informatics, Technology and Science (BITS)
- Vol. 4 (3)
Pendekatan Algoritma Tree dalam Prediksi Populasi pada Smart Poultry
Intelligent systems for monitoring poultry in kennels are experiencing an increasing trend in several studies. Monitoring poultry is very important in the cage so that you can find out the chickens' condition and environment in the cage. Conditions that can be monitored include the weight of the chickens, whether or not there is enough water in a day, CO2 levels in the cages, air temperature, and humidity in the cages. Several studies have been conducted studies on monitoring poultry cages using IoT-based sensors. However, people have yet to predict the poultry population for tomorrow. So this study aims to predict the number of poultry populations in kennels based on related parameters. The prediction method used in this research is a decision tree and Support Vector Machine (SVM) to see which prediction method is better. The results evaluation techniques used in this study are Mean Square Error (MSE), Root Mean Square Error (RMSE), Mean Absolute Error (MAE), and R2. The experimental results show that using the decision tree method, and the results are MSE 61987.202, RMSE 248.972, MAE 85.086, and R2 0.969. Overall the results of the decision tree method are superior to SVM.
- 30 December 2022
- Published by Forum Kerjasama Pendidikan Tinggi (FKPT) in Building of Informatics, Technology and Science (BITS)
- Vol. 4 (3)
Open AccessPendekatan Algoritma Tree dalam Prediksi Populasi pada Smart Poultry
Intelligent systems for monitoring poultry in kennels are experiencing an increasing trend in several studies. Monitoring poultry is very important in the cage so that you can find out the chickens' condition and environment in the cage. Conditions that can be monitored include the weight of the chickens, whether or not there is enough water in a day, CO2 levels in the cages, air temperature, and humidity in the cages. Several studies have been conducted studies on monitoring poultry cages using IoT-based sensors. However, people have yet to predict the poultry population for tomorrow. So this study aims to predict the number of poultry populations in kennels based on related parameters. The prediction method used in this research is a decision tree and Support Vector Machine (SVM) to see which prediction method is better. The results evaluation techniques used in this study are Mean Square Error (MSE), Root Mean Square Error (RMSE), Mean Absolute Error (MAE), and R2. The experimental results show that using the decision tree method, and the results are MSE 61987.202, RMSE 248.972, MAE 85.086, and R2 0.969. Overall the results of the decision tree method are superior to SVM.
- Open Access
- 25 January 2022
- Published by Universitas Budi Darma in JURNAL MEDIA INFORMATIKA BUDIDARMA
- Vol. 6 (1) , 473-483
Sistem Monitoring Tekanan Pada Pipa Air Menggunakan Arduino Uno Pada Jaringan Lora 920-923 Mhz
In everyday life water is one of the components that is very important and becomes a basic need for human life and other living things. Of course, when flowing water to all corners there are obstacles such as leaks in water pipes that can be caused by air pressure. These leaks can cause the flowing water to get dirty or even not flow all the way to the destination. Therefore, this study will be created a pressure monitoring system on water pipes that will use pressure transmitter sensors that serve to read the pressure on water pipes using LoRaWAN data communication, this communication is used because the device can communicate up to a distance of 5 to 15 kilometers. To connect or send data from the sensor to LoRa requires an Arduino uno that will process the data from the sensor to be used. To store data using the Antares platform. This research is useful for monitoring pressure on water pipes and minimizing leaks in pipes. By using the method of calculating linear regression equations obtained a very accurate value for water pressure readings on pressure sensors that are 98.9%, while the results of testing the values received signal strength indicator (RSSI), signal noise radio (SNR) and packet loss are interconnected, in the value of RSSI and SNR the smaller the packet loss the more data is lost. The use of Spreading Factor values can also be taken into account if you want a longer range with a small packet loss result.
- 25 January 2022
- Published by Universitas Budi Darma in JURNAL MEDIA INFORMATIKA BUDIDARMA
- Vol. 6 (1) , 473-483
Open AccessSistem Monitoring Tekanan Pada Pipa Air Menggunakan Arduino Uno Pada Jaringan Lora 920-923 Mhz
In everyday life water is one of the components that is very important and becomes a basic need for human life and other living things. Of course, when flowing water to all corners there are obstacles such as leaks in water pipes that can be caused by air pressure. These leaks can cause the flowing water to get dirty or even not flow all the way to the destination. Therefore, this study will be created a pressure monitoring system on water pipes that will use pressure transmitter sensors that serve to read the pressure on water pipes using LoRaWAN data communication, this communication is used because the device can communicate up to a distance of 5 to 15 kilometers. To connect or send data from the sensor to LoRa requires an Arduino uno that will process the data from the sensor to be used. To store data using the Antares platform. This research is useful for monitoring pressure on water pipes and minimizing leaks in pipes. By using the method of calculating linear regression equations obtained a very accurate value for water pressure readings on pressure sensors that are 98.9%, while the results of testing the values received signal strength indicator (RSSI), signal noise radio (SNR) and packet loss are interconnected, in the value of RSSI and SNR the smaller the packet loss the more data is lost. The use of Spreading Factor values can also be taken into account if you want a longer range with a small packet loss result.