GGGabriel Sabença Gusmão

Gabriel Sabença Gusmão

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Gabriel Sabença Gusmão has a total of 23 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Reactive Capture and Conversion of Carbon Dioxide to Methanol with ZnZrO2 and Alkali-Promoted Mg3AlOx Mixed Oxide Catalytic Sorbents

    by Laura Proaño, Katlo Galefete, Guanhe Rim, Gabriel Gusmão, Christopher W. Jones

    Reactive capture and conversion (RCC) explores the use of a single-unit process to capture CO2 and produce a product, in this case, methanol (MeOH). In this study, different configurations of a catalytic sorbent (CS) composed of ZnZrO2 catalyst and Mg3AlO x sorbent with and without alkali modification are evaluated for CO2 adsorption, steady-state catalysis with cofed CO2 and H2, and transient RCC performance. A catalyst composed of a physical mixture of Mg3AlO x with ZnZrO2 resulted in a slight increase in CO2 uptake, with a low impact on the catalytic activity and RCC of the materials compared to ZnZrO2 alone. In contrast, Na impregnation significantly increased the level of CO2 uptake from 0.28 mmol/g (ZnZrO2 alone) to 0.6 and 1.1 mmol/g for the CS with Na on the catalyst or Mg3AlO x , respectively. However, Na impregnation reduced the CO2 conversion rate and MeOH selectivity during steady-state cofeed experiments at 300 °C and 6 bar. In contrast to steady-state catalysis conditions, RCC, which is a cyclic capture and conversion process, creates dynamic CO2 and H2 surface coverages, favoring CH4 in the early stages of the conversion step and then CO and MeOH as the catalyst CO2 coverage reduces. The highest MeOH productivity during RCC was achieved with CS that balanced the CO2 uptake with only moderate catalyst rate reductions caused by Na addition. The optimal material, ZnZrO2+10%Na/Mg3AlOx, achieved a CO2 uptake of 0.8 mmol/g and a MeOH productivity of 0.5 mmol/g with 100% selectivity at 260 °C and 6 bar during RCC. This marks the highest RCC MeOH productivity reported to date, although the process needs further optimization and even with optimization, may remain impractical. The results further demonstrate that optimization of catalytic sorbents under steady-state flow conditions does not easily correlate to transient capture and conversion cycles for methanol synthesis from CO2.


  • Open Access

    Unifying thermochemistry concepts in computational heterogeneous catalysis

    by Bjarne Kreitz, Gabriel S. Gusmão, Dingqi Nai, Sushree Jagriti Sahoo, Andrew A. Peterson, David H. Bross, C. Franklin Goldsmith, Andrew J. Medford

    Thermophysical properties of adsorbates and gas-phase species define the free energy landscape of heterogeneously catalyzed processes and are pivotal for an atomistic understanding of the catalyst performance. These thermophysical properties, such as the free energy or the enthalpy, are typically derived from density functional theory (DFT) calculations. Enthalpies are species-interdependent properties that are only meaningful when referenced to other species. The widespread use of DFT has led to a proliferation of new energetic data in the literature and databases. However, there is a lack of consistency in how DFT data is referenced and how the associated enthalpies or free energies are stored and reported, leading to challenges in reproducing or utilizing the results of prior work. Additionally, DFT suffers from exchange–correlation errors that often require corrections to align the data with other global thermochemical networks, which are not always clearly documented or explained. In this review, we introduce a set of consistent terminology and definitions, review existing approaches, and unify the techniques using the framework of linear algebra. This set of terminology and tools facilitates the correction and alignment of energies between different data formats and sources, promoting the sharing and reuse of ab initio data. Standardization of thermochemistry concepts in computational heterogeneous catalysis reduces computational cost and enhances fundamental understanding of catalytic processes, which will accelerate the computational design of optimally performing catalysts.


  • Open Access

    Micro-kinetic modeling of temporal analysis of products data using kinetics-informed neural networks

    by Dingqi Nai, Gabriel Sabença Gusmão, Zachary A. Kilwein, Fani Boukouvala, Andrew J. Medford

    Kinetics-informed neural networks improve fit quality for multi-pulse and noisy temporal analysis of products datasets.


  • Open Access

    Unifying thermochemistry concepts in computational heterogeneous catalysis

    by Bjarne Kreitz, Gabriel S. Gusmão, Dingqi Nai, Sushree Jagriti Sahoo, Andrew A. Peterson, David H. Bross, C. Franklin Goldsmith, Andrew J. Medford

    Thermophysical properties of adsorbates and gas-phase species define the free energy landscape of heterogeneously catalyzed processes and are pivotal for an atomistic understanding of the catalyst performance. These thermophysical properties, such as the free energy or the enthalpy, are typically derived from density functional theory (DFT) calculations. Enthalpies are species-interdependent properties that are only meaningful when referenced to other species. The widespread use of DFT has led to a proliferation of new energetic data in the literature and databases. However, there is a lack of consistency in how DFT data is referenced and how the associated enthalpies or free energies are stored and reported, leading to challenges in reproducing or utilizing the results of prior work. Additionally, DFT suffers from exchange-correlation errors that often require corrections to align the data with other global thermochemical networks, which are not always clearly documented or explained. In this review, we introduce a set of consistent terminology and definitions, review existing approaches, and unify the techniques using the framework of linear algebra. This set of terminology and tools facilitates the correction and alignment of energies between different data formats and sources, promoting the sharing and reuse of ab initio data. Standardization of thermochemistry concepts in computational heterogeneous catalysis reduces computational cost and enhances fundamental understanding of catalytic processes, which will accelerate the computational design of optimally performing catalysts.


  • Open Access

    Model-Based Design of Experiments for Temporal Analysis of Products (TAP): A Simulated Case Study in Oxidative Propane Dehydrogenation

    by Adam Yonge, Gabriel S. Gusmão, Rebecca Fushimi, Andrew J. Medford

    Temporal analysis of products (TAP) reactors enable experiments that probe numerous kinetic processes within a single set of experimental data through variations in pulse intensity, delay, or temperature. Selecting additional TAP experiments often involves an arbitrary selection of reaction conditions or the use of chemical intuition. To make experiment selection in TAP more robust, we explore the efficacy of model-based design of experiments (MBDoE) for precision in TAP reactor kinetic modeling. We successfully applied this approach to a case study of synthetic oxidative propane dehydrogenation (OPDH) that involves pulses of propane and oxygen. We found that experiments identified as optimal through the MBDoE for precision generally reduce parameter uncertainties to a higher degree than alternative experiments. The performance of MBDoE for model divergence was also explored for OPDH, with the relevant active sites (catalyst structure) being unknown. An experiment that maximized the divergence between the three proposed mechanisms was identified and provided evidence that improved the mechanism discrimination. However, reoptimization of kinetic parameters eliminated the ability to discriminate between models. The findings yield insight into the prospects and limitations of MBDoE for TAP and transient kinetic experiments.


  • Quantifying the impact of temporal analysis of products reactor initial state uncertainties on kinetic parameters

    by Adam Yonge, Gabriel S. Gusmão, Rakesh Batchu, M. Ross Kunz, Zongtang Fang, Rebecca Fushimi, Andrew J. Medford

    The temporal analysis of products (TAP) reactor provides a route to extract intrinsic kinetics from transient measurements. Current TAP uncertainty quantification only considers the experimental noise present in the outlet flow signal. Additional sources of uncertainty such as initial surface coverages, catalyst zone location, inert void fraction, gas pulse intensity, and pulse delay, are not included. For this reason, a framework for quantifying initial state uncertainties present in TAP experiments is presented and applied to a carbon monoxide oxidation case study. Two methods for quantifying these sources of uncertainty are introduced. The first utilizes initial state sensitivities to approximate the parameter variances and provide insights into the structural certainty of the model. The second generates parameter confidence distributions through an ensemble‐based sampling algorithm. The initial state covariance matrix can ultimately be merged with the experimental noise covariance matrix, providing a unified description of the parameter uncertainties for a TAP experiment.


  • Open Access

    Quantifying the impact of temporal analysis of products reactor initial state uncertainties on kinetic parameters

    by Adam Yonge, M. Kunz, Gabriel Gusmão, Zongtang Fang, Rakesh Batchu, Rebecca Fushimi, Andrew Medford

    The temporal analysis of products (TAP) reactor provides a route to extract intrinsic kinetics from transient measurements. Current TAP uncertainty quantification only considers the experimental noise present in the outlet flow signal. Additional sources of uncertainty such as initial surface coverages, catalyst zone location, inert void fraction, gas pulse intensity and pulse delay, are not included. For this reason, a framework for quantifying initial state uncertainties present in TAP experiments is presented and applied to a carbon monoxide oxidation case study. Two methods for quantifying these sources of uncertainty are introduced. The first utilizes initial state sensitivities to approximate the parameter variances and provide insights into the structural certainty of the model. The second generates parameter confidence distributions through an ensemble-based sampling algorithm. The initial state covariance matrix can ultimately be merged with the experimental noise covariance matrix, providing a unified description of the parameter uncertainties for a TAP experiment.