Filston Rukerandanga
Research Subjects
Filston Rukerandanga has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
Stephen Musyoki
School of Electrical and Electronic Engineering, The Technical University of Kenya, P.O. Box 52428, 00200 Nairobi, Kenya
2 shared publications- Edwin Ataro
School of Electrical and Electronic Engineering, Technical University of Kenya, Nairobi P.O. Box 52428 00200, Kenya
1 shared publication Edwin O. Ataro
Technical University of Kenya
1 shared publication- Edwin O. Ataro
School of Electrical and Electronic Engineering, The Technical University of Kenya, P.O. Box 52428, 00200 Nairobi, Kenya
1 shared publication - Stephen Musyoki
Department of Electrical Engineering, Technical University of Kenya, Kenya
1 shared publication
Latest Publications
- Open Access
Ultra-Low Power All-Optically Tuned Hybrid Graphene Ultra Silicon-Rich Nitride Ring Resonator-Based Add-Drop Filter for DWDM Systems
This research work conducted a design and simulation of an ultra-low power all-optically tuned nonlinear ring resonator-based add-drop filter. The purpose of this study is to investigate a CMOS-compatible nonlinear material system for an optical filter with temperature resilience, polarization insensitivity, and fast and energy-efficient tunability. The all-optical tunability was achieved using an optical pump that photo-excites the high nonlinear Kerr effect in the device material system. A three-dimensional multiphysics approach was used, combining the electromagnetics and thermo-structural effects in the filter. Hybrid graphene on an ultra-rich silicon nitride ring resonator-based filter enabled the realization of an ultra-high tuning efficiency (0.275 nm/mW for TE mode and 0.253 nm/mW for TM mode) on a range of 1.55 nm and thermal stability of 0.11 pm/K. This work contributed to the existing literature by proposing (1) the integration of a high Kerr effect layer on a low loss, high index contrast, and two-photon absorption-free core material with an athermal cladding material system and (2) the use of a cross-section shape insensitive to polarization. Moreover, the tuning mechanism contributed to the realization of an all-optical on-chip integrable filter for Dense Wavelength Division Multiplexing systems in the less occupied L band.
Open AccessUltra-Low Power All-Optically Tuned Hybrid Graphene Ultra Silicon-Rich Nitride Ring Resonator-Based Add-Drop Filter for DWDM Systems
This research work conducted a design and simulation of an ultra-low power all-optically tuned nonlinear ring resonator-based add-drop filter. The purpose of this study is to investigate a CMOS-compatible nonlinear material system for an optical filter with temperature resilience, polarization insensitivity, and fast and energy-efficient tunability. The all-optical tunability was achieved using an optical pump that photo-excites the high nonlinear Kerr effect in the device material system. A three-dimensional multiphysics approach was used, combining the electromagnetics and thermo-structural effects in the filter. Hybrid graphene on an ultra-rich silicon nitride ring resonator-based filter enabled the realization of an ultra-high tuning efficiency (0.275 nm/mW for TE mode and 0.253 nm/mW for TM mode) on a range of 1.55 nm and thermal stability of 0.11 pm/K. This work contributed to the existing literature by proposing (1) the integration of a high Kerr effect layer on a low loss, high index contrast, and two-photon absorption-free core material with an athermal cladding material system and (2) the use of a cross-section shape insensitive to polarization. Moreover, the tuning mechanism contributed to the realization of an all-optical on-chip integrable filter for Dense Wavelength Division Multiplexing systems in the less occupied L band.
- Open Access
- 1 January 2022
- Published by Wiley in International Journal of Optics
- Vol. 2022 (1)
Design and Analysis of Ultralow Voltage Graphene on the Silicon Rich Nitride Tunable Ring Resonator‐Based Add‐Drop Filter for DWDM Systems
We propose and simulate a third‐order 3D electro‐optically highly tunable compact add‐drop filter based on nonlinear microring resonators. The used tuning mechanism relies on enhanced Kerr nonlinearity in a graphene layer integrated on top of a two‐photonabsorption‐free and low loss silicon‐rich nitride core material at telecommunication wavelengths. An ultrahigh tuning efficiency (150 pm/V) over a tuning range of 1.3 nm, ensuring ultralow voltage consumption, was achieved in this work. We used titanium oxide and silicon oxide as the upper‐cladding and under‐cladding materials, respectively, around the silicon‐rich nitride core material, to come up with a polarization‐insensitive, and the thermally resilient third‐orderadd‐drop optical filter in the L band (1565 nm–1625 nm) with a full wave at a half maximum bandwidth of 50 GHz (linewidth of 0.4 nm) around 1570 nm, a high‐free spectral range of 18.5 nm, a quality factor of 2580, an extinction ratio of 60 dB, a finesse of 19, and a thermal stability of 0.3 pm/K. A three‐dimensional multiphysics approach was used to simulate the propagation of transverse electric and transverse magnetic polarized waves through the filter, combining the electromagnetic features with thermo‐optic and stress‐optical effects. The contribution of this work to the existing literature is that the designed filter proposes a new and highly tunable material system compatible with the complementary metal‐oxide‐semiconductor fabrication technology while combining high tunability, polarization insensitivity, and high thermal stability features for an ultracompact and energy‐efficienton‐chip integrated photonic tunable filter for dense wavelength division multiplexing systems in the less occupied L band.
- 1 January 2022
- Published by Wiley in International Journal of Optics
- Vol. 2022 (1)
Open AccessDesign and Analysis of Ultralow Voltage Graphene on the Silicon Rich Nitride Tunable Ring Resonator‐Based Add‐Drop Filter for DWDM Systems
We propose and simulate a third‐order 3D electro‐optically highly tunable compact add‐drop filter based on nonlinear microring resonators. The used tuning mechanism relies on enhanced Kerr nonlinearity in a graphene layer integrated on top of a two‐photonabsorption‐free and low loss silicon‐rich nitride core material at telecommunication wavelengths. An ultrahigh tuning efficiency (150 pm/V) over a tuning range of 1.3 nm, ensuring ultralow voltage consumption, was achieved in this work. We used titanium oxide and silicon oxide as the upper‐cladding and under‐cladding materials, respectively, around the silicon‐rich nitride core material, to come up with a polarization‐insensitive, and the thermally resilient third‐orderadd‐drop optical filter in the L band (1565 nm–1625 nm) with a full wave at a half maximum bandwidth of 50 GHz (linewidth of 0.4 nm) around 1570 nm, a high‐free spectral range of 18.5 nm, a quality factor of 2580, an extinction ratio of 60 dB, a finesse of 19, and a thermal stability of 0.3 pm/K. A three‐dimensional multiphysics approach was used to simulate the propagation of transverse electric and transverse magnetic polarized waves through the filter, combining the electromagnetic features with thermo‐optic and stress‐optical effects. The contribution of this work to the existing literature is that the designed filter proposes a new and highly tunable material system compatible with the complementary metal‐oxide‐semiconductor fabrication technology while combining high tunability, polarization insensitivity, and high thermal stability features for an ultracompact and energy‐efficienton‐chip integrated photonic tunable filter for dense wavelength division multiplexing systems in the less occupied L band.