XLXiong Liu

Xiong Liu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Xiong Liu has a total of 40 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Accelerated Charge Transfer Kinetics and Byproduct Suppression in Surface-Tailored LiNi0.83Mn0.05Co0.12O2 Cathode at –40 °C

    by Zhaoguo Zhang, Zhe Chen, Baokang Zhang, Junzhe Wang, Hailong Wan, Peng Zhang, Litong Shi, Qian Wang, Feixiang Ding, Xiong Liu, et al.

    In extreme-environment applications such as military, aerospace, and polar research, batteries capable of reliable operation at ultralow temperatures are urgently needed. Current low-temperature battery research has largely focused on electrolyte optimization, while cathode material design remains relatively underexplored. LiNi0.83Mn0.05Co0.12O2 cathodes, however, suffer from sluggish interfacial charge-transfer kinetics and accelerated parasitic reactions at –40 °C. Here, a simple polypyrrole (PPy) surface coating is demonstrated to simultaneously enhance the rate capability and cycling stability of LiNi0.83Mn0.05Co0.12O2 at –40 °C. The π-conjugated PPy coating improves electronic transport while stabilizing the surface/interfacial chemical environment, thereby reducing the kinetic barrier for interfacial charge transfer, suppressing excessive interphase growth, and facilitating Li+ transport. Consequently, the PPy-coated cathode delivers 103.1 mAh g–1 at 1C and retains 78.7% of its capacity over 300 cycles at –40 °C. Furthermore, a practical 1.6 Ah lithium-metal pouch cell delivers 75% of its nominal energy at –40 °C and maintains 92.2% capacity retention after 50 cycles. This work highlights cathode interfacial engineering as an effective complement to electrolyte optimization for developing high-rate and long-life LiNixMnyCo1–x–yO2-based lithium-metal batteries under extreme cold.

  • A competitive coordination effect to simultaneously achieve high-energy and stable cycles in a Li-metal pouch cell at −40 °C

    by Xingxing Meng, Xiao Zhang, Litong Shi, Zhe Chen, Jiashen Meng, Feixiang Ding, Xiong Liu, Baokang Zhang, Qian Wang, Liqiang Mai, et al.

    The competitive coordination between Li + and dimethyl carbonate (DMC) and 1, 2-dimethoxyethane (DME) weakens the Li + -solvent interaction and forms a robust inorganic-rich interface, enabling stable cycling of Li-metal pouch cells at −40 °C.


  • Non-destructive stripping electrochemistry enables long-life zinc metal batteries

    by Ruiting Guo, Xiong Liu, Kun Ni, Fanjie Xia, Huazhang Zhang, Yu Liu, Xinzhe Dai, Litong Shi, Xuanpeng Wang, Chunhua Han, et al.

    Current research focuses on regulating Zn plating behavior to address the dendrite issue. Although significant improvements in the lifespans of symmetric batteries have been achieved, full batteries do not demonstrate a corresponding increase in the overall lifespan. The underlying reasons for this discrepancy remain unexplored. Herein, we identify that this performance mismatch is attributed to the neglect of the initial stripping behavior of the zinc anode in practical full batteries. This initial stripping, characterized by inherent inhomogeneities, causes anomalous and localized detachment of the interface layer. The incompleteness of the interface layer will result in the failure of its protection function. Then a non-destructive stripping strategy involving instantaneous repair of the damaged region is proposed to maintain the structural and functional integrity of the interface layer. During prolonged cycling, the copper–zinc species within the interface layer undergo irreversible phase reconstruction and spatial redistribution, which facilitate the de-solvation of hydrated Zn2+ and determine the plating of large-sized Zn(002). Utilizing this non-destructive anode, the full battery demonstrates a lifespan increase comparable to that of a symmetric battery, achieving an ultralong lifespan (1240 hours, 800 cycles) at a low current density (0.246 A g−1) with an ultrahigh cumulative capacity (847 mA h cm−2), and an Ah-level pouch cell exhibiting 150 stable cycles is also validated.


  • Anomalous Detachment Behavior and Directional Reconstruction Regulation of Leaching‐Type Precatalysts for Industrial Water Electrolyzers

    by Xiong Liu, Ruiting Guo, Minghao Guo, Kun Ni, Meng Huang, Jiashen Meng, Xiaohong Xie, Dongyuan Zhao, Liqiang Mai, Chaojiang Niu

    Current reconstruction chemistry studies are mainly operated at the laboratory scale, where the operating parameters are different from those used in industrial water electrolyzers. This gap leads to unclear reconstruction behaviors under industrial conditions and constrains the application of catalysts. Here, this work presents a new reconstruction mechanism and anomalous detachment phenomena observed in leaching‐type oxygen‐evolving precatalysts under industrial conditions, different from the reported results obtained under laboratory conditions. The identified detachment issues are closely linked to the production of a potassium salt separate phase, which proves sensitive to the local environment, and its instability easily leads to catalyst stripping from the substrate. By establishing detachment critical point and operating parameter‐detachment correlation, a targeted reconstruction strategy is proposed to achieve smooth ligand leaching and effectively solve the detachment issue. Theoretical analyses validate the dual‐site regulation in directionally reconstructed catalysts with optimized intermediate adsorption. Under industrial conditions, the coupled electrolyzer delivers an industrial‐level current density at low cell voltage with prolonged durability, 1 A cm−2 at 2 V for over 340 h. This work bridges the gap of leaching‐type precatalysts between laboratory test conditions and industrial operating conditions.


  • Top Cited Papers

    Large‐Scale Integration of a Zinc Metasilicate Interface Layer Guiding Well‐Regulated Zn Deposition

    by Ruiting Guo, Xiong Liu, Fanjie Xia, Yalong Jiang, Huazhang Zhang, Meng Huang, Chaojiang Niu, Jinsong Wu, Yan Zhao, Xuanpeng Wang, et al.

    Uneven distribution of electric fields at the electrolyte–anode interface and associated Zn dendrite growth is one of the most critical barriers that limit the life span of aqueous zinc‐ion batteries. Herein, new‐type Zn–A–O (A = Si, Ti) interface layers with thin and uniform thickness, porosity, and hydrophilicity properties are developed to realize homogeneous and smooth Zn plating. For ZnSiO3 nanosheet arrays on Zn foil (Zn@ZSO), their formation follows an “etching–nucleation–growth” mechanism that is confirmed by a well‐designed Zn‐island‐based identical‐location microscopy method, the geometric area of which is up to 1000 cm2 in one‐pot synthesis based on a low‐temperature wet‐chemical method. Guided by the structural advantages of the ZSO layer, the Zn2+ flux gets equalized. Besides ultralow polarization, the life spans of symmetric cells and full cells coupled with a high‐mass‐loading K0.27MnO2·0.54H2O (8 mg cm−2) cathode, are increased by 3–7 times with the Zn@ZSO anode. Moreover, the large‐scale preparation of Zn@ZSO foil contributes to a 0.5 Ah multilayer pouch cell with high performance, further confirming its prospects for practical application.


  • A synergistic effect between layer surface configurations and K ions of potassium vanadate nanowires for enhanced energy storage performance

    by Jiashen Meng, Ziang Liu, Chaojiang Niu, Xiaoming Xu, Xiong Liu, Guobin Zhang, Xuanpeng Wang, Meng Huang, Yang Yu, Liqiang Mai

    Layered metal vanadates, especially alkali metal vanadates, have been extensively studied in energy storage. Generally, vanadates exhibit more stable electrochemical performance than pristine vanadium oxides, and different vanadates also vary in the performance. However, the detailed mechanisms of the variation in the performance of vanadates and vanadium oxides are poorly explored. Here we choose and construct three typical layered vanadium-based nanowires (V2O5, KV3O8 and K0.25V2O5), and investigate the origin of the enhanced electrochemical performance of the potassium vanadates compared to V2O5, based on crystal structure analysis, electrochemical tests, ex situ ICP measurements and in situ XRD detections. We demonstrate a synergistic effect between layer surface configurations and K ions of potassium vanadate nanowires, which leads to the great improvement in electrochemical stability of K0.25V2O5. The layer surface configuration of K0.25V2O5 only consists of single-connected oxygen atoms, which provides strong interaction with the K ions. And the stabilized K ions act as “pillars” between interlayers to protect the layered structures from collapse in the charge/discharge process. This work provides a further insight into alkali metal vanadates, and benefits the design of ideal electrode materials in the energy storage field.