Bao The Nguyen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Bao The Nguyen has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Viet Van Hoang
Ho Chi Minh City Univ Technol HCMUT, Dept Heat & Refrigerat Engn, 268 Ly Thuong Kiet St,Dist 10, Ho Chi Minh City, Vietnam
3 shared publications - Chi Hiep Le
Ho Chi Minh City Univ Technol HCMUT, Fac Mech Engn, Dept Heat & Refrigerat, VNU HCM, Ho Chi Minh City, Vietnam
2 shared publications - Dang Huy Le
Department of Heat and Refrigeration Engineering, Faculty of Mechanical Engineering, Ho Chi Minh City University of Technology (HCMUT), Ho Chi Minh City, Vietnam
2 shared publications Ngo Van Minh
Institute of Sustainable Energy Development
2 shared publicationsVan Minh Ngo
Institute for Sustainable Energy Development – ISED, Ho Chi Minh City, Vietnam
2 shared publications- Anh T. Hoang
Power Engineering Consulting Joint Stock Company 2, Ho Chi Minh City, Vietnam
1 shared publication
Latest Publications
- Open Access
- 19 May 2026
- Published by Elsevier in SSRN Electronic Journal
Development of the blade element momentum method for two-stage wind turbines and experimental verification
This study aims to develop a robust analytical method based on the blade element momentum (BEM) theory for horizontal-axis two-stage wind turbines, validated through both wind tunnel experiments and real-world field pilot installations. The algorithm is developed with improvements primarily based on a new distance function that couples axial wind speed reduction with turbulent wake recovery. The proposed model is validated against wind tunnel experimental data using S826 blades, showing an average error in the power coefficient of less than 5% across all surveyed rotor spacings ($S/D$ from 2 to 5.15) for both co-rotating and counter-rotating configurations. A physical "Transfer Point" at S/D=0.7 is identified, representing the boundary where turbulent mixing from the external environment begins to dominate. To demonstrate practical feasibility, a physical field pilot project consisting of conventional single-rotor and co-axial dual-rotor wind turbines with a rated capacity of 2.0 kW was successfully installed and operated in Dak Lak Province, Vietnam. A techno-economic analysis based on these real field operations reveals that the 33% increase in energy capture of the dual-rotor turbine successfully offsets its 30% initial capital cost (CAPEX) increase, resulting in a 2.86% reduction in the levelized cost of energy (LCOE) to 0.2478 USD/kWh. This work provides a fast, reliable, and commercially viable tool for the design optimization and deployment of high-efficiency multi-stage wind energy systems.
- 19 May 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessDevelopment of the blade element momentum method for two-stage wind turbines and experimental verification
This study aims to develop a robust analytical method based on the blade element momentum (BEM) theory for horizontal-axis two-stage wind turbines, validated through both wind tunnel experiments and real-world field pilot installations. The algorithm is developed with improvements primarily based on a new distance function that couples axial wind speed reduction with turbulent wake recovery. The proposed model is validated against wind tunnel experimental data using S826 blades, showing an average error in the power coefficient of less than 5% across all surveyed rotor spacings ($S/D$ from 2 to 5.15) for both co-rotating and counter-rotating configurations. A physical "Transfer Point" at S/D=0.7 is identified, representing the boundary where turbulent mixing from the external environment begins to dominate. To demonstrate practical feasibility, a physical field pilot project consisting of conventional single-rotor and co-axial dual-rotor wind turbines with a rated capacity of 2.0 kW was successfully installed and operated in Dak Lak Province, Vietnam. A techno-economic analysis based on these real field operations reveals that the 33% increase in energy capture of the dual-rotor turbine successfully offsets its 30% initial capital cost (CAPEX) increase, resulting in a 2.86% reduction in the levelized cost of energy (LCOE) to 0.2478 USD/kWh. This work provides a fast, reliable, and commercially viable tool for the design optimization and deployment of high-efficiency multi-stage wind energy systems.
- 1 March 2026
- Published by Kyushu University in Evergreen
- Vol. 13 (1) , 408-416
The Impact of Ultrasound-Assisted Freezing on Energy Consumption and Freezing Time of White Shrimp and Striped Catfish
- 1 March 2026
- Published by Kyushu University in Evergreen
- Vol. 13 (1) , 408-416
The Impact of Ultrasound-Assisted Freezing on Energy Consumption and Freezing Time of White Shrimp and Striped Catfish
- 19 September 2025
- Published by SAGE Publications in Wind Engineering
- Vol. 50 (4) , 962-982
Design, simulation, and experimental evaluation of a novel three-stage coaxial counter-rotating wind turbine
This paper presents the design, aerodynamic simulation, and experimental validation of a novel three-stage horizontal-axis wind turbine (HAWT) with coaxial and independently rotating rotors. Building on the dual-rotor architecture widely studied in recent years, the proposed configuration introduces a third rotor with a larger radius (120–125% compared to the first two rotors) to harness the remaining wind energy passing through upstream stages. The rotors rotate in opposite directions to increase the relative velocity of magnetic field interaction, thereby improving electrical generation efficiency. The aerodynamic behavior of the turbine was analyzed using XFlow software with the Lattice-Boltzmann Method (LBM), enabling large eddy simulations (LES) on an octree mesh to capture flow interactions and wake effects. The optimized blade geometry and spacing were determined through simulation, focusing on maximizing energy extraction at low to moderate wind speeds (3–9 m/s). A 3D-printed experimental prototype was developed using GOE222 airfoil profiles and tested in a controlled wind tunnel environment. The test setup allowed selective activation of one, two, or all three rotor stages to isolate and compare their respective power outputs. Results demonstrated that the three-stage turbine consistently outperformed both single-stage and dual-stage configurations. Notably, power output increased by 30%–94% compared to the two-stage design, and up to 703% compared to the single-stage model at lower wind speeds. This study demonstrates the significant potential of multi-stage, counter-rotating turbines in small and medium-scale applications, offering a viable path toward higher efficiency and improved energy harvesting from wind resources.
- 19 September 2025
- Published by SAGE Publications in Wind Engineering
- Vol. 50 (4) , 962-982
Design, simulation, and experimental evaluation of a novel three-stage coaxial counter-rotating wind turbine
This paper presents the design, aerodynamic simulation, and experimental validation of a novel three-stage horizontal-axis wind turbine (HAWT) with coaxial and independently rotating rotors. Building on the dual-rotor architecture widely studied in recent years, the proposed configuration introduces a third rotor with a larger radius (120–125% compared to the first two rotors) to harness the remaining wind energy passing through upstream stages. The rotors rotate in opposite directions to increase the relative velocity of magnetic field interaction, thereby improving electrical generation efficiency. The aerodynamic behavior of the turbine was analyzed using XFlow software with the Lattice-Boltzmann Method (LBM), enabling large eddy simulations (LES) on an octree mesh to capture flow interactions and wake effects. The optimized blade geometry and spacing were determined through simulation, focusing on maximizing energy extraction at low to moderate wind speeds (3–9 m/s). A 3D-printed experimental prototype was developed using GOE222 airfoil profiles and tested in a controlled wind tunnel environment. The test setup allowed selective activation of one, two, or all three rotor stages to isolate and compare their respective power outputs. Results demonstrated that the three-stage turbine consistently outperformed both single-stage and dual-stage configurations. Notably, power output increased by 30%–94% compared to the two-stage design, and up to 703% compared to the single-stage model at lower wind speeds. This study demonstrates the significant potential of multi-stage, counter-rotating turbines in small and medium-scale applications, offering a viable path toward higher efficiency and improved energy harvesting from wind resources.
- Open Access
- 28 August 2025
- Published by Ho Chi Minh City University of Technology and Engineering in Journal of Technical Education Science
- Vol. 20 (03(V)) , 93-102
Ứng dụng mô hình song sinh số trong việc quản lý năng lượng tòa nhà
Bài báo này trình bày một mô hình song sinh số khả thi với chi phí hợp lý nhằm giám sát năng lượng và hiệu chuẩn mô phỏng theo thời gian thực trong công trình xây dựng. Các cảm biến đo nhiệt độ, độ ẩm, điện áp, dòng điện và hệ số công suất được lắp đặt tại một văn phòng nhỏ, truyền dữ liệu 20 giây một lần qua Interet of Things (IoT) dùng nền tảng Microsoft Azure và lưu trữ trên đám mây. Dữ liệu này được dùng để hiệu chuẩn mô hình EnergyPlus mô phỏng hệ thống điều hòa công suất cố định. Quá trình hiệu chuẩn tuân theo Hướng dẫn số 14 của Hiệp hội Kỹ sư Sưởi ấm, Làm mát và Điều hòa Không khí Hoa Kỳ (ASHRAE) cho dữ liệu theo giờ, sử dụng các chỉ số sai số căn bậc hai, hệ số biến thiên và sai số thiên lệch chuẩn hóa. Sau bốn lần hiệu chuẩn, mô hình đạt mức sai số 10,65% và –2,05%, nằm trong ngưỡng khuyến nghị. Kết quả khẳng định vai trò của dữ liệu thời gian thực trong nâng cao độ chính xác mô phỏng và hỗ trợ phát hiện bất thường, điều khiển dự đoán trong quản lý năng lượng tòa nhà thông minh.
- 28 August 2025
- Published by Ho Chi Minh City University of Technology and Engineering in Journal of Technical Education Science
- Vol. 20 (03(V)) , 93-102
Open AccessỨng dụng mô hình song sinh số trong việc quản lý năng lượng tòa nhà
Bài báo này trình bày một mô hình song sinh số khả thi với chi phí hợp lý nhằm giám sát năng lượng và hiệu chuẩn mô phỏng theo thời gian thực trong công trình xây dựng. Các cảm biến đo nhiệt độ, độ ẩm, điện áp, dòng điện và hệ số công suất được lắp đặt tại một văn phòng nhỏ, truyền dữ liệu 20 giây một lần qua Interet of Things (IoT) dùng nền tảng Microsoft Azure và lưu trữ trên đám mây. Dữ liệu này được dùng để hiệu chuẩn mô hình EnergyPlus mô phỏng hệ thống điều hòa công suất cố định. Quá trình hiệu chuẩn tuân theo Hướng dẫn số 14 của Hiệp hội Kỹ sư Sưởi ấm, Làm mát và Điều hòa Không khí Hoa Kỳ (ASHRAE) cho dữ liệu theo giờ, sử dụng các chỉ số sai số căn bậc hai, hệ số biến thiên và sai số thiên lệch chuẩn hóa. Sau bốn lần hiệu chuẩn, mô hình đạt mức sai số 10,65% và –2,05%, nằm trong ngưỡng khuyến nghị. Kết quả khẳng định vai trò của dữ liệu thời gian thực trong nâng cao độ chính xác mô phỏng và hỗ trợ phát hiện bất thường, điều khiển dự đoán trong quản lý năng lượng tòa nhà thông minh.
- Open Access
- 11 June 2025
- Published by Springer Nature in International Journal of Air-Conditioning and Refrigeration
- Vol. 33 (1) , 1-9
Application of blade element momentum theory with guaranteed convergence to analyze a straight-blade horizontal axis wind turbine
Blade element momentum theory continues to be widely used in the wind industry to calculate and analyze wind turbines. This theory has been improved many times to address its inherent weakness of convergence capability. This article applies the one variable BEM method, which has been further improved to help ensure convergence to apply analytical calculations for small horizontal-axis straight-blade wind turbines. This type of turbine has much potential for practical applications, providing electricity to households and residential areas far from cities, but has not been fully researched. Straight-blade turbines with relatively large Re changes in blade spanwise direction often cause difficulties in the convergence of BEM algorithms. This article presents the ability to apply improved BEM theory to straight-blade wind turbines in the wind speed range from 5 to 7 m/s and tip speed ratio from 4 to 7 through analytical calculations. A well-validated CFD model was also performed to evaluate the reliability of the calculation method. The obtained results show that the improved BEM method can be applied to calculate the mechanical power output of straight-blade turbines with errors of less than 10% compared to reality. This thereby proves the applicability of the improved BEM method to solve practical problems of small wind turbines.
- 11 June 2025
- Published by Springer Nature in International Journal of Air-Conditioning and Refrigeration
- Vol. 33 (1) , 1-9
Open AccessApplication of blade element momentum theory with guaranteed convergence to analyze a straight-blade horizontal axis wind turbine
Blade element momentum theory continues to be widely used in the wind industry to calculate and analyze wind turbines. This theory has been improved many times to address its inherent weakness of convergence capability. This article applies the one variable BEM method, which has been further improved to help ensure convergence to apply analytical calculations for small horizontal-axis straight-blade wind turbines. This type of turbine has much potential for practical applications, providing electricity to households and residential areas far from cities, but has not been fully researched. Straight-blade turbines with relatively large Re changes in blade spanwise direction often cause difficulties in the convergence of BEM algorithms. This article presents the ability to apply improved BEM theory to straight-blade wind turbines in the wind speed range from 5 to 7 m/s and tip speed ratio from 4 to 7 through analytical calculations. A well-validated CFD model was also performed to evaluate the reliability of the calculation method. The obtained results show that the improved BEM method can be applied to calculate the mechanical power output of straight-blade turbines with errors of less than 10% compared to reality. This thereby proves the applicability of the improved BEM method to solve practical problems of small wind turbines.
- 17 October 2024
- Published by Springer Nature
- p. 809-823
An Experimental Study of Maximum Power Point Tracking for Small-Scale Wind Turbines
- 17 October 2024
- Published by Springer Nature
- p. 809-823
An Experimental Study of Maximum Power Point Tracking for Small-Scale Wind Turbines
- 13 July 2024
- Published by Springer Nature
- p. 655-662
Experimental Study of a Novel Dual-Stages Counter Rotating Small Wind Turbine
- 13 July 2024
- Published by Springer Nature
- p. 655-662
Experimental Study of a Novel Dual-Stages Counter Rotating Small Wind Turbine
- Open Access
Experimental Performance of a Novel Dual−Stage Counter−Rotating Small Wind Turbine and Forming a Validatable CFD Computational Model
This paper publishes the experimental performance results of a novel small dual−stage wind turbine at different speeds under wind tunnel testing. The results confirm its superiority at low wind speeds front and 0.06Rrear, accordingly). This method predicts higher mechanical work for the turbine than the actual value by an interval of <10% in the same speed range as in the experiment. This is an acceptable deviation.
Open AccessExperimental Performance of a Novel Dual−Stage Counter−Rotating Small Wind Turbine and Forming a Validatable CFD Computational Model
This paper publishes the experimental performance results of a novel small dual−stage wind turbine at different speeds under wind tunnel testing. The results confirm its superiority at low wind speeds front and 0.06Rrear, accordingly). This method predicts higher mechanical work for the turbine than the actual value by an interval of <10% in the same speed range as in the experiment. This is an acceptable deviation.