NPNikolai Vladimirovich Popov

Nikolai Vladimirovich Popov

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Nikolai Vladimirovich Popov has a total of 58 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Adjunctive Multisensory Passive Immersive Virtual Reality With Synchronized Plantar Tactile Stimulation for Gait and Balance Disorders in Parkinson's Disease: An Exploratory Randomized Controlled Trial

    by Igor Shirolapov, Sviatoslav Natalevich, Elena Khivintseva, Yuliya Komarova, Natalia Romanchuk, Mariya Sergeeva, Nikolay Popov, Vladimir Kalinin, Alexander Zakharov

    Postural‐locomotor disorders, particularly freezing of gait and postural instability, are among the most disabling symptoms of advanced Parkinson's disease (PD) and respond only partially to dopaminergic therapy. Evidence for virtual reality (VR) approaches in moderate to severe PD remains limited. This prospective randomized controlled open‐label exploratory trial evaluated the addition of multisensory passive immersive VR with synchronized plantar tactile stimulation to conventional rehabilitation for gait, balance, and freezing disorders in moderate‐to‐severe PD (Hoehn and Yahr Stages 2–4). In the study, 80 PD patients were randomized into an experimental group (EXP, n = 40) receiving standard pharmacotherapy and conventional rehabilitation plus 10 sessions of passive immersive VR with synchronized plantar tactile stimulation and a comparison group (COM, n = 40) receiving standard pharmacotherapy and conventional rehabilitation only. Because the VR sessions were added to an otherwise identical program, the trial evaluates the effect of adding this intervention rather than a VR‐ or tactile‐specific effect. Outcomes were assessed at baseline and after 10 days using the Unified Parkinson's Disease Rating Scale (UPDRS), Berg Balance Scale (BBS), and Freezing of Gait Questionnaire (FoG‐Q). The EXP group showed significant improvements in the UPDRS “Gait” cluster (an eight‐item composite of UPDRS items 2.11, 2.12, 2.13, 3.9, 3.10, 3.11, 3.12, and 3.13, range 0–32; median from 12.5 to 8.0 points, p < 0.001), BBS (from 38.0 to 43.5 points, p < 0.001), and FoG‐Q (from 9.0 to 6.5 points, p < 0.001). A formal group × time analysis confirmed a differential treatment effect for every outcome. For the main outcome, the UPDRS “Gait” cluster, the baseline‐adjusted between‐group difference was −2.48 points (95% CI −3.37 to −1.59; p < 0.001; Hedges' g = 1.16). Large effects also favored the EXP group for the FoG‐Q (−2.14 points, 95% CI −2.62 to −1.66; g = 1.65), the BBS (+2.20 points, 95% CI 1.31 to 3.10; g = 1.06), the UPDRS freezing subscore (items 2.13 + 3.11; −0.89 points, 95% CI −1.13 to −0.66; g = 1.32), and the UPDRS postural subscore (items 3.12 + 3.13; −0.74 points, 95% CI −1.08 to −0.41; g = 0.93). Secondary outcome p ‐values were adjusted for multiple comparisons using the Holm and Benjamini–Hochberg procedures. By contrast, in the COM group, no significant change was observed for freezing of gait ( p = 0.083), and improvements in other outcomes were smaller than in the EXP group. No serious adverse events were recorded. The trial was exploratory, so the effect estimates require confirmation rather than supporting robustness in themselves. Overall, multisensory passive immersive VR with synchronized plantar tactile stimulation was well tolerated and shows preliminary promise as an adjunct to conventional rehabilitation for gait and balance disorders in moderate‐to‐severe PD. Wider clinical implementation requires long‐term multicenter studies with standardized assessment criteria and analysis of long‐term sustainability. These findings support integrating passive VR technologies into personalized neurorehabilitation programs.

  • Prospects for respiratory training with immersive technologies and biofeedback in patients of outpatient dental practice

    by I.R. Ganzha, N.V. Popov, A.A. Blazhnova, A.V. Zakharov, I.V. Shirolapov, E.V. Khivintseva

    This study evaluates the effectiveness of structured respiratory training using virtual reality (VR) and biofeedback for reducing psychophysiological tension in patients of outpatient dental practice. Thirty-four patients were enrolled in this pilot randomised study and allocated to a main group (training with VR and biofeedback, n=17) and a comparison group (n=17). In the main group, breathing awareness increased from 35.8±7.5 to 41.4±9.0 points (p=0.052 by the sign test and p=0.011 by the Wilcoxon signed-rank test) and relaxation self-efficacy increased from 4.8±3.6 to 7.0±3.5 points (p=0.043 by the sign test and p=0.006 by the Wilcoxon signed-rank test). Between-group comparison of changes showed a statistically significant advantage of VR-assisted training for the gain in breathing awareness (p=0.038 by the Mann–Whitney U-test); no between-group difference was found for relaxation self-efficacy (p=0.092). The findings suggest that a single session of respiratory training with immersive technologies and biofeedback promotes the development of breathing self-regulation skills. Given the sample size, the single-session design and the use of non-validated scales, these data are preliminary and require confirmation in larger studies assessing anxiety, autonomic measures and treatment adherence.

  • Open Access

    Clinical decision-making support system for dental implant design using machine learning

    by A. A. Kijko, A. N. Nikolaenko, M. A. Postnikov, N. V. Popov, A. D. Lysov, A. E. Ponomarev, E. V. Zarov

    Purpose of research . A current challenge in digital dental implantation is the selection and design of a parametric implant, taking into account the volume and quality of bone tissue in the implantation area, bone density and structure, the planned prosthetic structure, and a number of other factors. The purpose of the study is to develop a medical decision-making support system with Artificial Intelligence for selection and design of a parametric dental implant. Methods . As a result of the analysis of the features of the implant installation and decision support logic, knowledge base and machine learning components were included in the corresponding software package. The implementation of the knowledge base is made in the form of a computer ontology and contains rules arranged in a typical sequence of data processing. Artificial intelligence technology is used at the stage of determining the density of the trabecular bone and classifying it by bone type by analyzing the patient's cone beam computed tomography images using a neural network. Results . In the experiment, computed tomography images of the lower jaw with different resolutions were used as initial images, pre-marked by bone density groups, 30 images in each group (120 cases in total). The best results were shown by the residual neural network model ResNet 34. The model achieved 0.875 accuracy on the validation sample and 0.75 accuracy on the test sample with a loss function value of about 0.72. Thus, we can conclude about the positive possibility of using machine learning technology. Conclusion . The main scientific result of the study is the generalization of technical solutions within a unified set of visualization technologies, combined with a knowledge base in the form of computer ontology and a machine learning module, in accordance with the principles of personalized medicine. The proposed hybrid approach, combining ex pert rules with machine learning methods, combines the advantages of two paradigms: formalized clinical experience and adaptive detection of hidden patterns


  • Open Access

    Celebrating 60 years of dental education at Samara State Medical University

    by N. V. Popov, A. V. Vinnik, L. S. Rozakova

    2026 год – год 60-летия стоматологического образования в Самарском государственном медицинском университете – по праву можно назвать знаковым: единое стоматологическое пространство полностью сформировано. Центральным элементом принципиально нового образовательного формата является Институт стоматологии, который занимает особое место в структуре вуза. Сегодня это мощное подразделение университета с самобытной историей, богатыми традициями и четко выстроенной системой подготовки высококвалифицированных специалистов всех уровней высшего образования.

  • Open Access

    Treatment of patients with disocclusion

    by Grigoriy Stepanov, N. V. Popov, L. G. Ulyanova, Y. N. Chuchalov

    Aim: to improve the effectiveness of comprehensive treatment for patients with vertical malocclusion. Material and methods. The study included 37 patients with malocclusion (24 women and 13 men) aged 19 to 39 years. Inclusion in the study was determined by malocclusion in the anterior incisor region, incisor-canine region, and incisor-canine and premolar regions. In the posterior regions, the presence of bilateral or unilateral malocclusion (right or left) was assessed. Persin’s classification was used. Clinical, anthropometric, and radiographic examinations, as well as occlusionography, were used. Results. Reliable results were obtained, confirming improved malocclusion after comprehensive treatment. Treatment effectiveness was confirmed by comparing interalveolar heights before and after comprehensive orthodontic treatment. Individuals undergoing orthodontic treatment with a diagnosis of malocclusion received comprehensive treatment using removable and fixed orthodontic appliances. A new orthodontic mouth guard was used, which corrected the malocclusion and achieved optimal dental occlusion. Conclusion. The proposed method for treating patients with malocclusion using a proprietary orthodontic appliance will help achieve stable, positive results.

  • Open Access

    Tooth retention: analysis of prevalence among patients receiving orthodontic treatment

    by I. Y. Shchukina, Nikolai Vladimirovich Popov, Ekaterina Aleksandrovna Ishchenko, Щукина Ирина Юрьевна

    Aim.To analyze the prevalence of tooth eruption anomaly in the upper and lower jaws among patients and to determine the significance of local etiological factors in orthodontic patients during the period from 2020 to 2025. Materials and methods.A retrospective analysis of archival data from 3,905 patients was conducted to determine the frequency of tooth retention. A representative group of 717 individuals with diagnosed retention was selected. The etiological factors of retention were analyzed, including ankylosis, premature tooth extraction, supernumerary teeth, odontogenic tumors, traumatic injuries, and ectopic eruption pathways. Results and discussion.Clinical examination and analysis of orthopantomograms revealed 782 retained teeth among the 717 patients. Of these, 514 (65.73%) were located in the upper jaw and 268 (34.27%) in the lower jaw. In the upper jaw, retention of canines was most commonly observed, with frequencies of 17.52% in females and 15.47% in males, as well as retention of premolars (12.92% in females and 14.69% in males). In the lower jaw, premolars were the most commonly retained teeth, occurring in 11.25% of males and 10.49% of females, while the retention of second molars was 5.88% in males and 4.47% in females. Retention of incisors in the upper jaw was observed in 1.54% of females and 2.05% of males, whereas in the lower jaw, the rates were lower at 0.64% in females and 0.38% in males. Regarding etiological factors, the leading cause of retention was premature extraction of milk teeth (39.13%), followed by ectopic eruption pathway (27.88%), ankylosis (5.63%), supernumerary teeth (2.43%), odontogenic tumors (2.56%), and traumatic injuries (4.22%). In 144 cases (18.41%), the etiology of retention remained undetermined. Conclusion.According to the retrospective analysis, the highest frequency of retention is observed among the canines of the upper jaw. An increased incidence of premolar retention has been noted compared to previous studies. The results emphasize the significance of timely prevention and the necessity for further studies on the pathogenesis of retention, especially in cases with undetermined etiology.

  • Analysis of biometric methods for anthropometric research of jaw

    by I.O. Ayupova, V.S. Evseev, N.V. Popov, S.V. Vinnik, A.M. Khamadeeva, O.L. Livanova, M.A. Davidyuk

    Objective. The aim of this study is to analyse the literature data on the study of biometric indices obtained on jaw models, including those included in the medical record of an orthodontic patient, to determine the relevance and feasibility of their use for various nosological forms of dental pathologies. Material and methods. In order to systematise and study biometric methods of jaw model diagnosis, 132 sources of domestic and foreign literature were analysed. The study included publications identified through database searches, as well as additional sources. Literature analysis of scientific publications in PubMed, eLibrary and Google Scholar systems was performed using the following keywords: biometric methods of research, medical records of orthodontic patients and dimensions of tooth rows. Fifty-eight publications were excluded from the total number of sources according to various criteria, which allowed us to analyse 74 sources that included methods of biometric analysis of jaw models. Results. The results of the analysis have shown that the use of biometric models of the jaws can improve the accuracy of diagnosis and the efficiency of surgical and prosthetic interventions. In particular, the results of anthropometric studies contribute to the individualisation of approaches to treatment and rehabilitation of patients, taking into account the anatomical and physiological features of the dentoalveolar system. Conclusion. Despite the high level of development of orthodontic care, it was found that the existing information on biometric examination methods is unstructured and there is no clustering of methods. This makes it difficult to choose a treatment plan and make a diagnosis, which is aggravated by the lack of clear data in the medical record of an orthodontic patient. There is a need to develop algorithms for the application of biometric techniques and create a unified thesaurus to improve diagnosis. In addition, modern clinics should pay attention to the digitalisation of diagnostic processes, as the use of high-tech tools significantly increases the accuracy of measurements and efficiency of work.

  • Possibilities for optimizing preventive and therapeutic dental care for the pediatric population of Chapayevsk using SWOT analysis

    by A.M. Khamadeeva, N.V. Popov, L.R. Baimuratova, G.S. Kozupitsa, Zh.B. Kustavletova, N.V. Nogina, I.O. Ayupova, I.YU. Shchykina

    Relevance. Monitoring of the dental health of the pediatric population in Chapayevsk from 1995 to 2022 revealed a trend of increasing prevalence and severity of dental caries after the cessation of preventive dental programs in 2005. Objective. To substantiate the need for optimizing dental care for children in Chapayevsk based on a SWOT analysis. Materials and methods. The analysis of the pediatric dental service utilized data from dental health monitoring conducted between 1995 and 2022. A SWOT analysis was used to evaluate the strengths and weaknesses of dental care for the pediatric population, identify opportunities for improvement, and determine internal and external threats. Results. The SWOT analysis demonstrated the need to improve dental health among the pediatric population by introducing health-saving technologies to promote healthy lifestyle habits in organized children’s groups with the involvement of parents and primary healthcare staff, even under conditions of limited healthcare funding.


  • AI-Assisted MRI

    by Alexander Zakharov, Alexander Kolsanov, Elena Khivintseva, Olga Pavlova, Vladimir А. Kalinin, Nikolay Popov, Nadezhda Evgenievna Karpova

    Artificial intelligence (AI) combined with magnetic resonance imaging (MRI) is transforming multiple sclerosis (MS) management. AI improves lesion detection, segmentation, and tracking, enhancing diagnostic precision and reducing variability. By integrating multimodal MRI data with biomarkers, AI-driven models predict disease progression and personalize treatment strategies, enabling early intervention. These models support therapy response prediction and optimize disease-modifying therapies. AI also automates longitudinal monitoring, assessing lesion changes, brain atrophy, and microstructural damage with high accuracy. Advanced techniques, such as radiomics and functional imaging, reveal subtle patterns of disease progression, providing valuable insights into neurodegeneration. These innovations streamline clinical workflows, improve patient outcomes, and advance precision medicine in MS. By enhancing diagnostic accuracy, treatment planning, and monitoring, AI-powered MRI represents a paradigm shift in neurodegenerative disease management


  • Open Access

    Comparative Analysis of Modern Techniques for Finishing Composite Restorations Using a Dental Microscope

    by Samara State Medical University, Anastasiya V. Vinnik, Nikolay V. Popov, Sergey V. Vinnik, Valentina V. Paygina

    The most important stage in sealing with composite materials is finishing, which determines the durability, strength, and aesthetics of the restoration. Currently, there are many modern polishing tools that meet various requirements. The aim of the article is to provide a comparative analysis of modern systems for finishing composite restorations. During the study, we used the Estelite Quick and EsCom nanocomposites, from which 16 samples were prepared. All samples were divided into four groups for finishing, where: group 1 was not subjected to any treatment, being used as a control one; group 2 consisted of grinding discs No. НК 1.020 (“ТОР ВМ”, Moscow); group 3 consisted of Enhance Dentsply polishing heads (UK); group 4 was represented with Opti 1 Step Polisher Kerr polishing system (USA). A coloring agent was also used to evaluate the polishing quality. The surface condition of the samples was studied using a Karl Kaps dental microscope. Analysis of the photographs has shown that the samples in the first group have an uneven structure and a rough surface with defects, the samples in the second group have a more even surface, but there are scratches and colored pores, the samples in the third group have areas with coloring and a surface with streaks, the samples in the fourth group have the smoothest surface and shine. Analyzing the quality of finishing using a microscope, we can conclude that the polishing head from the Opti 1 Step Polisher Kerr system showed the best result.