MPMinh Tuan Pham

Minh Tuan Pham

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Minh Tuan Pham has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A comprehensive review on the use of biodiesel for diesel engines

    by Van Giao Nguyen, Minh Tuan Pham, Nguyen Viet Linh Le, Huu Cuong Le, Thanh Hai Truong, Dao Nam Cao

    Fossil fuels are the main source of energy for transportation operations around the world. However, fossil fuels cause extremely negative impacts on the environment, as well as uneven distribution across countries, increasing energy insecurity. Biodiesel is one of the potential and feasible options in recent years to solve energy problems. Biodiesel is a renewable, low-carbon fuel source that is increasingly being used as a replacement for traditional fossil fuels, particularly in diesel engines. Biodiesel has several potential benefits such as reducing greenhouse gas emissions, improving air quality, and energy independence. However, there are also several challenges associated with the use of biodiesel including the compatibility of biodiesel with existing engine technologies and infrastructure as well as the cost of production, which can vary depending on factors such as location, climate, and competing uses for the feedstocks. Meanwhile, studies aimed at comprehensively assessing the impact of biodiesel on engine power, performance, and emissions are lacking. This becomes a major barrier to the dissemination of this potential energy source. Therefore, this study will provide a comprehensive view of the physicochemical properties of biodiesel that affect the performance and emission properties of the engine, as well as discuss the difficulties and opportunities of this potential fuel source.


  • Open Access

    Optimization of biodiesel production from Nahar oil using Box-Behnken design, ANOVA and grey wolf optimizer

    by Van Nhanh Nguyen, Prabhakar Sharma, Anurag Kumar, Minh Tuan Pham, Huu Cuong Le, Thanh Hai Truong, Dao Nam Cao

    Biodiesel manufacturing from renewable feedstocks has received a lot of attention as a viable alternative to fossil fuels. The Box-Behnken design, analysis of variance (ANOVA), and the Grey Wolf Optimizer (GWO) algorithm were used in this work to optimise biodiesel production from Nahar oil. The goal was to determine the best operating parameters for maximising biodiesel yield. The Box-Behnken design is used, with four essential parameters taken into account: molar ratio, reaction duration and temperature, and catalyst weight percentage. The response surface is studied in this design, and the key factors influencing biodiesel yield are discovered. The gathered data is given to ANOVA analysis to determine the statistical significance. ANOVA analysis is performed on the acquired data to determine the statistical significance of the components and their interactions. The GWO algorithm is used to better optimise the biodiesel production process. Based on the data provided, the GWO algorithm obtains an optimised yield of 91.6484% by running the reaction for 200 minutes, using a molar ratio of 7, and a catalyst weight percentage of 1.2. As indicated by the lower boundaries, the reaction temperature ranges from 50 °C. The results show that the Box-Behnken design, ANOVA, and GWO algorithm were successfully integrated for optimising biodiesel production from Nahar oil. This method offers useful insights into process optimisation and indicates the possibilities for increasing the efficiency and sustainability of biodiesel production. Further study can broaden the use of these strategies to various biodiesel production processes and feedstocks, advancing sustainable energy technology.


  • Open Access

    Understanding Fuel Saving and Clean Fuel Strategies Towards Green Maritime

    by Van Nhanh Nguyen, Krzysztof Rudzki, Marek Dzida, Nguyen Dang Khoa Pham, Minh Tuan Pham, Phuoc Quy Phong Nguyen, Phuong Nguyen Xuan

    Due to recent emission-associated regulations imposed on marine fuel, ship owners have been forced to seek alternate fuels, in order to meet the new limits. The aim of achieving low-carbon shipping by the year 2050, has meant that alternative marine fuels, as well as various technological and operational initiatives, need to be taken into account. This article evaluates and examines recent clean fuels and novel clean technologies for vessels. The alternative fuels are classified as low-carbon fuels, carbon-free fuels, and carbon neutral fuels, based on their properties. Fuel properties, the status of technological development, and existing challenges are also summarised in this paper. Furthermore, researchers have also investigated energy-saving devices and discovered that zero-carbon and virtually zero-carbon clean fuels, together with clean production, might play an important part in shipping, despite the commercial impracticability of existing costs and infrastructure. More interestingly, the transition to marine fuel is known to be a lengthy process; thus, early consensus-building, as well as action-adoption, in the maritime community is critical for meeting the expectations and aims of sustainable marine transportation.


  • Open Access

    Measurement and Prediction of the Density and Viscosity of Biodiesel Blends

    by Minh Tuan Pham, Anh Tuan Hoang, Anh Tuan Le, Abdel Rahman M.SAid Al-Tawaha, Van Huong Dong, Van Vang Le

    Biodiesel has been considered as the potential fuel type with many advantages such as environmental pollution reduction, no sulfur production, and biodegradation. However, disadvantages of biodiesel such as high viscosity and high density affected diesel engines and fuel systems negatively. Thus, it is necessary to reduce the viscosity and density of biodiesel fuel in unmodified diesel engines. Until now, a large number of empirical correlations have been used to predict the viscosity and density of biodiesel–fossil diesel fuel blend This study was conducted to predict the kinematic viscosity and density of blends of biodiesel and fossil diesel fuel. Three types of biodiesel were examined: Coconut oil-based biodiesel (COB), Jatropha oil-based biodiesel (JOB), and Waste oil-based biodiesel (WOB). Twenty-four samples of the three types of biodiesel–diesel fuel blends were created by blending 5% (B5), 10% (B10), 20% (B20), 40% (B40), 50% (B50), 60% (B60), 75% (B75), and 100% (B100) of biodiesel with conventional diesel fuel to produce the corresponding blends for experimental purposes. Experimental correlations and mathematical equations for predicting the relationship between the kinematic viscosity and the density of the biodiesel–fossil diesel fuel blends, the dependence of the kinematic viscosity and the density of the biodiesel–fossil diesel fuel blends on biodiesel fractions, and the effects of temperature on the kinematic viscosity and density of pure biodiesel were developed. The results of the experimental correlation data were near the predicted mathematical equation with a confidence level of 95%.


  • Open Access

    Influences of heating temperatures on physical properties, spray characteristics of bio-oils and fuel supply system of a conventional diesel engine

    by Anh Tuan Hoang, Minh Tuan Pham

    Alternative fuels need to satisfy the strict requirements of the use for diesel engines aiming at enhancing the performance and reducing pollutant emissions. The use of straight bio-oils for diesel engines entails improving their disadvantages such as high density, high surface tension and kinematic viscosity (tri-physical parameters). There have been some as-used methods for reduction of the above-mentioned negative effects related to straight bio-oil disadvantage, however, the adequately-heating method may be considered as a simple one helping the physical parameters of straight bio-oils to reach stable and highly-confident values which are close to those of traditional diesel fuel. As a consequence, the spray and atomization, combustion, performance, and emissions of diesel engines fueled with preheated bio-oils are improved. In this work, a study of the dependence of the density, surface tension and kinematic viscosity of coconut oil (a type of bio-oils) on temperatures (from 40-110oC) within a wide variety are conducted. In the first stage, the influence study of temperature on tri-physical parameters is carried out on the basis of experimental correlation and as-described mathematical equation. In the second stage, the influence study of tri-physical parameters on spray and atomization parameters including penetration length (Lb) and Sauter mean diameter (SMD), and the influence of tri-physical parameters on fuel supply system are investigated. The optimal range of temperature for the as-used bio-oils is found after analyzing and evaluating the obtained results regarding the physical properties and spray characteristics, as well as compared with those of diesel fuel. The confident level over 95% from the regression correlation equation between the above-mentioned tri-physical parameters and temperature is presented. Additionally, the measured spray parameters, the calculated values of frictional head loss and fuel flow rate are thoroughly reported.