BGBakhtiar Gul

Bakhtiar Gul

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Bakhtiar Gul has a total of 31 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Physalis ixocarpa: new species of genus physalis to the flora of Pakistan from mountainous region of district Shangla, Khyber Pakhtunkhwa Pakistan

    by W. Khan, B. Gul, M. N. Uddin, B. M. Khan, S. Attacha, N. Zaman

    In the western mountainous region of Khyber Pakhtunkhwa Pakistan at the Shangla district, we found Physalis ixocarpa for the first time, not yet reported from Pakistan. Physalis ixocarpa was unidentified and has no ethnobotanical record in the flora of Pakistan. It is a member of family Solanaceae and having a close relation with Solanum tuberosum and Lycopersicon esculentum. The stem is prostrate with a dichotomous pattern of branches having leaves flower and fruits. Leaves are smooth, ovate and the margins of leaf blade dentation are poorly developed. The average length and width of the leaves are 6.50 and 3.61 cm respectively. P. ixocarpa grows to the length of 4-5 feet and an annual herb. The flowers of the plants are yellow in color and having purple color spots on the petals which are star-shaped. The round berry fruits are surrounded by persistent calyx and purple in color. The fruits are the 3-6cm in diameter. The plants are found in the different localities of district Shangla especially in Bar and Koz Kana. The life cycle of reporting plant is started in May and completed in November.

  • Open Access

    Managing Weed–Crop Interactions Enhances Chickpea (Cicer arietinum L.) Chemical Components

    by Imtiaz Khan, Muhammad Ishfaq Khan, Saima Hashim, Muhammad Fawad, Aftab Jamal, Mahmoud F. Seleiman, Haroon Khan, Bakhtiar Gul, Zahid Hussain, Muhammad Farhan Saeed, et al.

    Chickpea (Cicer arietinum L.) is a major pulse crop worldwide, renowned for its nutritional richness and adaptability. Weeds are the main biotic factor deteriorating chickpea yield and nutritional quality, especially Asphodelus tenuifolius Cav. The present study concerns a two-year (2018–19 and 2019–20) field trial aiming at evaluating the effect of weed management on chickpea grain quality. Several weed management practices have been here implemented under a factorial randomized complete block design, including the application of four herbicides [bromoxynil (C7H3Br2NO) + MCPA (Methyl-chlorophenoxyacetic acid) (C9H9ClO3), fluroxypyr + MCPA, fenoxaprop-p-ethyl (C18H16ClNO5), pendimethalin (C13H19N3O4)], the extracts from two allelopathic weeds (Sorghum halepense and Cyperus rotundus), two mulches (wheat straw and eucalyptus leaves), a combination of A. tenuifolius extract and pendimethalin, and an untreated check (control). Chickpea grain quality was measured in terms of nitrogen, crude protein, crude fat, ash, and oil content. The herbicides pendimethalin (Stomp 330 EC (emulsifiable concentrate) in pre-emergence at a rate of 2.5 L ha−1) and fenoxaprop-p-ethyl (Puma Super 7.5 EW (emulsion in water) in post-emergence at a rate of 1.0 L ha−1), thanks to A. tenuifolius control, showed outstanding performance, providing the highest dietary quality of chickpea grain. The herbicides Stomp 330 EC, Buctril Super 40 EC, Starane-M 50 EC, and Puma Super 7.5 EW provided the highest levels of nitrogen. Outstanding increases in crude protein content were observed with all management strategies, particularly with Stomp 330 EC and Puma Super 7.5 EW (+18% on average). Ash content was highly elevated by Stomp 330 EC and Puma Super 7.5 EW, along with wheat straw mulching, reaching levels of 2.96% and 2.94%. Crude fat content experienced consistent elevations across all treatments, with the highest improvements achieved by Stomp 330 EC, Puma Super 7.5 EW, and wheat straw mulching applications. While 2018–19 displayed no significant oil content variations, 2019–20 revealed the highest oil content (5.97% and 5.96%) with herbicides Stomp 330 EC and Puma Super 7.5 EW, respectively, followed by eucalyptus leaves mulching (5.82%). The results here obtained are of key importance in the agricultural and food sector for the sustainable enhancement of chickpea grain’s nutritional quality without impacting the environment.


  • Open Access

    Irrigation Scheduling and Weed Management: A Sustainable Approach for Managing Broomrape and Other Weeds in Tomato Crop

    by Muhammad Fawad, Muhammad Azim Khan, Fazli Wahid, Haroon Khan, Bakhtiar Gul, Abdul Mateen Khattak, Aftab Jamal, Andrea Mastinu

    Broomrape (Orobanche cernua L.) is an obligate root parasitic weed that significantly reduces the qualitative and yield attributes of tomatoes globally. The efficient management of broomrape is challenging because of its complicated parasitic nature. Field trials were conducted to assess the influence of various irrigation scheduling and weed control strategies on broomrape, weed presence, and tomato productivity. The experiment was conducted with a randomized complete block design (RCBD) with a split-plot arrangement and was replicated three times. Three irrigation intervals (3, 6, and 9 days) were assigned to the main block, while sub-blocks including treatments and year were taken as the source of variance (year × irrigation timing × treatments). The experiment comprised sixteen treatments, including transparent polythene, black polythene, weedy check (Control), sole weeding of broomrape only, weeding of all weeds, weeding except broomrape, humic acid 25 kg ha−1+ copper oxychloride in single and split doses, copper oxychloride (1.5 kg a.i ha−1 in single and split doses), ammonium sulphate 200 kg ha−1 in single and split doses, copper sulfate (2 kg ha−1 in single/split doses), and glyphosate 48 SL (1.5 kg a.i ha−1) and pendimethalin 33 EC (1.44 kg a.i ha−1). The results revealed that among the various irrigation intervals, the highest broomrape intensity (4.34 plant−1) was observed with a9-day irrigation interval. Similarly, the highest weed density (35 m−2) resulted in a3-day irrigation interval. Furthermore, irrigation at a 6-day interval increased the plant height by 11%, fruit yield tons ha−1 by 24.9 %, and produced the highest cost/benefit ratio (CBR) of (1:4). Black polythene, transparent polythene, and pendimethalin reduced the weed density by 92%, 89%, and 84%;weed dry biomass by 97%, 95%, and 91%; and broomrape intensity by 67%, 77%, and 28%. Conversely, the plant height increased by 24%, 23%, and 23.6%; and fruit yield by 286%, 270%, and 191%; and had the highest CBR of 1:5, 1:4, and 1:4, respectively, as compared to the weedy check. Consequently, an increase in irrigation frequency increases other weed densities and decreases the broomrape intensity plant−1 of tomato. Therefore, black polythene could be recommended in a severely broomrape-infested field. Moreover, irrigation at 6-day intervals combined with pendimethalin and ammonium sulfate fertilizers revealed the lowest incidence of broomrape and other weeds and produced an economic yield.


  • Open Access

    Impact of Various Types of Polluted Water, Rhizome Size and Water Depth on Sprouting of Common Cattail (Typha latifolia L.) Rhizomes

    by Bakhtiar Gul, Alma Ghayasuddin, Haroon Khan, Imtiaz Khan, Muhammad Ishfaq Khan

    Three different studies were carried out in the Department of Weed Science, The University of Agriculture Peshawar, in January 2016 to examine the impacts of polluted water from various sources, water depths and rhizome size on the resprouting ability and establishment of common cattail rhizomes fragments after mechanical control. These experiments were arranged in Completely Randomized Design (CRD), replicated thrice. The selected experimental units were pots 20 inches wide and 12 inches deep. Typha latifolia L. rhizomes were placed in each pots and covered with a little silt to avoid it’s direct contact and desiccation from sunlight. The impacts of water quality on T. latifolia rhizomes sprouting were significant. Lowest ratio of sprouted and un-sprouted buds (50.00 % each), 1st sprout length (37.33 and 40 cm), average sprout length (17.47 and 16.96 cm), average biomass (9.99 and 10.27 g) and growth rate (0.172 and 0.196 g/day) were noted for saline water and industrial acidic effluents, respectively. However, highest rhizome sprouting was recorded for tap water applied as check followed by industrial effluent alkaline. The data regarding the impact of water depth on T. latifolia rhizome sprouting showed that sprouting (44.44 %), 1st sprout length (43.33 cm), average sprout length (20.99 cm), average sprout biomass (7.84 g), average diameter of the newly formed rhizome (0.24 cm) and growth rate (0.4233 g/day) were recorded for rhizomes placed at zero level water depth, while maximum buds sprouted at 4 inches water depth. Similarly, impact of rhizome size on resprouting revealed that minimum bud sprouting (44.44%), 1st sprout length (44.86 cm), average sprout length (0.93 cm) and biomass of newly formed rhizome (4.97 g) and minimum days to emergence (9) were noted for smaller rhizome length (2 buds) compared to longer rhizomes with 10 buds. Therefore, on the basis of our findings, saline and industrial effluent acidic, no standing water (zero water surface level) and shorter rhizome size resulted in least bud sprouting and minimized the chance of further infestation in an eco-friendly and ecological way without the use of herbicides. Whereas alkaline industrial effluents, standing water up to 4 inches and longer rhizome fragments enhanced sprouting and re-establishment of the T. latifolia and these strategies can be utilized where the aim is to grow and establish a good stand of T. latifolia for passive treatment and phytoremediation of industrial effluents, before draining the polluted water into fresh water bodies like rivers and streams.


  • Open Access

    Efficacy of Herbicides for Control of Duckweed (Lemna minor L.)

    by Bakhtiar Gul, Saleetha Rabial, Haroon Khan

    | An experiment was conducted in summer, 2016 at the Department of Weed Science, The University of Agriculture Peshawar to investigate the effect of herbicides on the management, growth and reproduction of duckweed (Lemna minor). The experiment was laid out in Completely Randomized Design (CRD) with three replecations and various herbicidal treatments. Duckweed was collected from fresh water bodies and transferred to the experimental units (pots). Data were recordrd on fresh biomass, budding (%), duckweed mortality (%), plant growth, root length, frond diameter, growth of microscopic algae and macrophytes associated with duckweed, and water surface coverage (%). Results revealed that herbicides had a significant effect on duckweed fresh biomass, budding % and water surface coverage. Minimum fresh biomass (2.98 g pot-1), budding (24 %) and water surface coverage (14.67 %) were recorded for glyphosate as compared to weedy check (4.45 g pot-1, 58.7 % and 22.67 %, respectively). Moreover, highest plant mortality (24.33 %) after four weeks was noted in glyphosate. Glyphosate effectively controlled the duckweed, followed by MCPA as compared to bromaxonil, isoproturon and paraquat. Therefore, glyphosate and MCPA proved suitable, economical and less laborious for the management of duckweed for large scale infestation.


  • Open Access

    Allelopathic Effect of Lotus and Arrowhead Weed on Wheat, Wild Oat and Milkthistle Germination

    by B. Gul, S. Ijaz, H. Khan

    An experiment was conducted to investigate the allelopathic effects of lotus (Nelumbo nucifera Gaertn.) and arrowhead (Sagittaria sagittifolia (Brummitt & Powell): L.) on seed germination of wheat and two associated weeds, namely, wild oat (Avena fatua L.) and milk thistle (Silybum marianum (L.) Gaertn.). The experiment was laid out in a Completely Randomized Design during May, 2014. Dried biomasses of lotus and arrowhead leaves were soaked in distilled water for 48 hrs for extract preparation. The extracts were applied at a rate of 5 and 10% concentrations to the seeds of wheat, wild oat and milk thistle at 25 °C in 10 cm wide Petri plates. A control treatment where only distilled water was applied to the seeds, was included for comparison. Data were recorded on germination (%), shoot length (cm), shoot and root fresh weights (g). The results revealed that 10% lotus extract reduced germination of wild oat (0.00%) and milk thistle (13.3%) but comparatively enhanced that of wheat (20%). By contrast, arrowhead totally inhibited germination of wheat and wild oat as compared to milk thistle (16.66%). Similarly, 10% lotus extract favored shoot length and root weight of wheat and milk thistle, whereas 100% inhibited wild oat. By comparison, arrowhead completely inhibited shoot length and root weight of wheat and wild oat at 10% conc. and enhanced milkthistle (3.00 cm and 3 g). A higher lotus extract conc. affected wild oat more than wheat and milkthistle, while arrowhead weed affected almost all test species. In conclusion, these aquatic weeds can be used as mulch in wheat in nearby fields of the infested aquatic water bodies for wild oat control, weed biomass disposal and nutrient addition to the soil.


  • Open Access

    Assessment of Integrated Weed Management Approaches on Asphodelus tenuifolius in Chickpea

    by I. Khan, M.I. Khan, H. Ullah, M. Haroon, B. Gul

    Chickpea is the third most important crop of rainfed areas of Pakistan, and it is severely affected by noxious weed Asphodelus tenuifolius. Therefore, a field trial was conducted to evaluate the effect of different allelopathic weed extracts, herbicides and mulches in controlling A. tenuifolius and other associated weeds in chickpea at “District Karak” Khyber Pakhtunkhwa-Pakistan. The experiment was carried out in a Randomized Complete Block Design (RCBD) and replicated thrice using a chickpea cultivar (Chattan) which was grown for the experimental trial. There were 9 treatments along with control for comparison. The treatments Stomp 330 EC (Pre-emergence) at 2.5 L ha-1, Fenoxaprop-p-ethyl, Bromoxanil+MCPA (Tank mix), Starane-M, mulching (Eucalyptus leaves), mulching (Wheat straw mulch), allelopathic weed extract (A. tenuifolius) + Stomp, allelopathic weed extract (Cyperus rotundus), allelopathic weed extract (Sorghum halepense) and control treatment were used in this trial. Data were recorded on A. tenuifolius density m-2 before and after application of weed management practices (m-2), A.tenuifolius fresh weight (m-2), seed yield (kg.ha-1), biological yield (kg ha-1) and cost-benefit ratio. Weed density before weed management was found to be non-significant. The data showed that minimum A. tenuifolius density after weed management and fresh weight (m-2) were found for Stomp 330 EC (6.33 m-2 and 1.98 kg m-2), which is statistically similar to Fenoxaprop-p-ethyl 6.9 EC (10.33 m-2 and 3.03 kg m-2) while maximum A. tenuifolius density and fresh weight (m-2) were recorded for control plots (74.33 m-2 and 287.46 kg m-2). Maximum seed yield (1,781.7 kg ha-1), biological yield (3,823 kg ha-1) and cost-benefit ratio (3.47) were recorded for plots treated with Stomp 330 EC, while the lowest seed yield (851.7 kg ha-1), biological yield (3,126.3 kg ha-1) and cost-benefit ratio (1.53) were observed for the control plot. Among the nutritive parameters in chickpea, maximum crude protein (17.40%), crude fat content (4.90%) and oil content (5.98%) were recorded for plots treated with Stomp 330 EC, while minimum crude protein (16.18%), crude fat content (4.12%) and oil content (5.01%) were found in the control plots. Thus, it is recommended that herbicides Stomp 330 EC and Fenoxaprop-p-ethyl should be used at pre-emergence at their recommended doses for control of A.tenuifolius and other associated weeds in chickpea crops.