YXYi Xu

Yi Xu

*This is an algorithmically generated author record based on publicly available information.

Yi Xu has a total of 4 co-authors. Here are the top co-authors by number of shared publications:

  • ErYong Zou

    Jiaxing Nanyang Polytechnic Institute, Jiaxing, Zhejiang 314000, China

    1 shared publication
  • Feng Zhou

    Department of Electrical, Electronic and Systems Engineering, Faculty of Engineering and Built Environment, UniversitiKebangsaan Malaysia, Bangi, Malaysia

    1 shared publication
  • FengPing Tang

    Jiaxing Nanyang Polytechnic Institute, Jiaxing, Zhejiang 314000, China

    1 shared publication
  • Mohd Hairi Mohd Zaman

    Department of Electrical, Electronic and Systems Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, Bangi, Selangor, Malaysia

    1 shared publication

Latest Publications

  • Open Access

    Optimized dual NURBS curve interpolation for high-accuracy five-axis CNC path planning

    by Yi Xu, Mohd Hairi Mohd Zaman, Feng Zhou

    As the demand for high-precision and high-efficiency machining increases in modern industrial manufacturing, five-axis CNC systems have become the primary solution for complex surface processing. This study presents a dual NURBS curve interpolation algorithm specifically designed for five-axis synchronized motion. Unlike traditional linear and circular interpolation methods, the dual NURBS interpolation utilizes a master-slave curve strategy to achieve synchronous control of tool position and orientation. In the proposed method, the master curve determines the tool path, while the slave curve adjusts the tool’s posture in real-time. Simulation experiments were performed on three representative surface models: Spiral Surface, Blade Surface, and Freeform Surface. The results indicate that the maximum chord error of the dual NURBS method on the Spiral Surface is only 0.0006 mm, with an average error of 0.0004 mm, significantly lower than traditional OC methods (0.01876 mm) and equal chord length interpolation (0.01532 mm). Furthermore, error analysis demonstrated that the dual NURBS method reduced the chord error over 68.6% compared to conventional methods and achieved more than a 16% improvement in processing efficiency. In addition, the dual NURBS algorithm showed smooth velocity planning, with speed fluctuation controlled within 10 mm/s, significantly better than traditional OC and equal chord length methods. These improvements not only enhance path smoothness but also significantly reduce tool vibration and surface defects during machining. The findings verify the effectiveness of the dual NURBS interpolation algorithm in improving machining accuracy and efficiency for complex five-axis CNC operations, offering a robust solution for high-precision surface processing.


  • Open Access

    Intelligent Control Method for Loss Distribution Balance of High-Power Photovoltaic Grid-Connected Inverters

    by Yi Xu, ErYong Zou, FengPing Tang

    Aiming at the problem that the loss distribution balance control effect of high-power photovoltaic grid-connected inverter is poor due to the complex loss factors, this paper proposes a loss distribution analysis and balance intelligent control method for high-power photovoltaic grid-connected inverter. The topology structure of high-power photovoltaic grid-connected inverter is constructed and the overall control scheme is designed. The loss of inductance, resonant frequency, harmonic attenuation, and damping resistance in the circuit of PV grid-connected inverter is analyzed, respectively. On this basis, a two-stage loss control model of high-power PV grid-connected inverter is constructed, and the generalized linear decision rule is adopted to schedule PV power supply and fluctuating load. A two-stage loss control model for high-power photovoltaic grid-connected inverter was established and the optimal loss control value was obtained. Experimental results show that the proposed method can accurately suppress voltage and current losses of grid-connected photovoltaic inverters and has strong resonance resistance and robustness.