Shao-Wei Tsai
Shao-Wei Tsai has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
- Chia-Hung Hou
Graduate Institute of Environmental Engineering, National Taiwan University, No. 1, Sec. 4. Roosevelt Rd., Taipei 10617, Taiwan
4 shared publications - Xiao Su
University of Illinois at Urbana-Champaign
2 shared publications - Anaira Román Santiago
Department of Chemical and Biomolecular Engineering University of Illinois Urbana‐Champaign Urbana IL 61801 USA
1 shared publication - Arjun K. Venkatesan
New Jersey Institute of Technology
1 shared publication - Ashok J. Gadgil
Department of Civil and Environmental Engineering, University of California, Berkeley, CA 94720, USA
1 shared publication - Bavisha Kalyan
Department of Civil Engineering, University of British Columbia, Vancouver, BC V6T 1Z4, Canada
1 shared publication
Latest Publications
- 25 May 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (22) , 15916-15926
Core–Shell Redox-Nanoparticles Integrate High Ammonium Selectivity with Long-Term Stability
Cu-based Prussian blue analogues (PBAs) are promising material platforms for selective ammonium intercalation due to their vacancy-rich framework. However, their limited cycling stability has hindered practical applications. Here, we design core-shell heterostructured PBAs using copper hexacyanoferrate (CuHCF) as an ammonium-selective core, with a nickel hexacyanoferrate (NiHCF) as an outer shell that enhances electrochemical stability. The nanostructural design of these mixed core-shell particles preserved ammonium selectivity while extending cycling longevity. The CuHCF@NiHCF nanoparticles were synthesized by a two-step coprecipitation, with the NiHCF shell thickness precisely controlled to 10 and 20 nm. Both core-shell particles retained over 98% capacity after 1000 charge-discharge cycles at 1 A g-1. Electrosorption with the 10 nm shell particles achieved a high separation factor of 9.2 for NH4+ over Na+ with 0.42 mmol g-1 NH4+ uptake, whereas the 20 nm shell particles exhibited a lower selectivity of 3.9. Furthermore, the selectivity of the 10 nm shell particles was enhanced to exceed 20 through voltage control. Electrosorption in a flow cell using the 10 nm shell particles demonstrated efficient NH4+ extraction from municipal wastewater, enriching the molar % of NH4+ among total cations from 29% to 61%. This work establishes shell thickness control as a strategy to couple high NH4+ selectivity with stability for sustainable resource recovery.
- 25 May 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (22) , 15916-15926
Core–Shell Redox-Nanoparticles Integrate High Ammonium Selectivity with Long-Term Stability
Cu-based Prussian blue analogues (PBAs) are promising material platforms for selective ammonium intercalation due to their vacancy-rich framework. However, their limited cycling stability has hindered practical applications. Here, we design core-shell heterostructured PBAs using copper hexacyanoferrate (CuHCF) as an ammonium-selective core, with a nickel hexacyanoferrate (NiHCF) as an outer shell that enhances electrochemical stability. The nanostructural design of these mixed core-shell particles preserved ammonium selectivity while extending cycling longevity. The CuHCF@NiHCF nanoparticles were synthesized by a two-step coprecipitation, with the NiHCF shell thickness precisely controlled to 10 and 20 nm. Both core-shell particles retained over 98% capacity after 1000 charge-discharge cycles at 1 A g-1. Electrosorption with the 10 nm shell particles achieved a high separation factor of 9.2 for NH4+ over Na+ with 0.42 mmol g-1 NH4+ uptake, whereas the 20 nm shell particles exhibited a lower selectivity of 3.9. Furthermore, the selectivity of the 10 nm shell particles was enhanced to exceed 20 through voltage control. Electrosorption in a flow cell using the 10 nm shell particles demonstrated efficient NH4+ extraction from municipal wastewater, enriching the molar % of NH4+ among total cations from 29% to 61%. This work establishes shell thickness control as a strategy to couple high NH4+ selectivity with stability for sustainable resource recovery.
- Top Cited Papers
- 14 January 2026
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 60 (3) , 2259-2276
Challenges and Opportunities in PFAS Waste Management for Semiconductor Manufacturing
Semiconductor manufacturing is rapidly expanding alongside tightening environmental regulations and increasing public concern around per- and polyfluoroalkyl substances (PFAS). Because of their unique chemical properties, PFAS are used across numerous processes in semiconductor manufacturing. Given process complexity and lengthy development timelines for alternatives, eliminating PFAS use in this industry is not currently feasible. Developing practical technologies for PFAS waste management is therefore critical but uniquely challenging in semiconductor manufacturing due to the nature of waste streams (parts-per-billion PFAS concentrations, complex backgrounds including hundreds of chemicals, prevalence of ultrashort PFAS, total stream volumes up to 35,000 m3 per day per facility, and distribution across gas, liquid, and solid phases) and significant constraints on space and systems redesign. This review describes recent developments and key questions that must be addressed to develop impactful and commercially viable detection and abatement methods for PFAS waste management in semiconductor manufacturing. Integrating these technologies into compact, high-performance systems and testing them under realistic conditions (complex PFAS mixtures, high fluoride/ionic strength, pH 6–11, low contact time, process variability) through industrial collaborations is essential for scalable, cost-effective solutions. Research addressing semiconductor industry-specific PFAS waste is essential to enable environmental compliance while supporting the continued growth of semiconductor manufacturing.
- 14 January 2026
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 60 (3) , 2259-2276
Top Cited PapersChallenges and Opportunities in PFAS Waste Management for Semiconductor Manufacturing
Semiconductor manufacturing is rapidly expanding alongside tightening environmental regulations and increasing public concern around per- and polyfluoroalkyl substances (PFAS). Because of their unique chemical properties, PFAS are used across numerous processes in semiconductor manufacturing. Given process complexity and lengthy development timelines for alternatives, eliminating PFAS use in this industry is not currently feasible. Developing practical technologies for PFAS waste management is therefore critical but uniquely challenging in semiconductor manufacturing due to the nature of waste streams (parts-per-billion PFAS concentrations, complex backgrounds including hundreds of chemicals, prevalence of ultrashort PFAS, total stream volumes up to 35,000 m3 per day per facility, and distribution across gas, liquid, and solid phases) and significant constraints on space and systems redesign. This review describes recent developments and key questions that must be addressed to develop impactful and commercially viable detection and abatement methods for PFAS waste management in semiconductor manufacturing. Integrating these technologies into compact, high-performance systems and testing them under realistic conditions (complex PFAS mixtures, high fluoride/ionic strength, pH 6–11, low contact time, process variability) through industrial collaborations is essential for scalable, cost-effective solutions. Research addressing semiconductor industry-specific PFAS waste is essential to enable environmental compliance while supporting the continued growth of semiconductor manufacturing.
- Open Access
- 11 November 2024
- Published by American Chemical Society (ACS) in ACS ES&T Water
- Vol. 4 (12) , 5598-5607
Advancing the Electrosorption Selectivity of Nitrate Through Fine-Tuning Hydrophobic Ammonium Functional Groups in Anion Exchange Membranes for Membrane Capacitive Deionization
- 11 November 2024
- Published by American Chemical Society (ACS) in ACS ES&T Water
- Vol. 4 (12) , 5598-5607
Open AccessAdvancing the Electrosorption Selectivity of Nitrate Through Fine-Tuning Hydrophobic Ammonium Functional Groups in Anion Exchange Membranes for Membrane Capacitive Deionization
- 21 June 2022
- Published by Elsevier in Water Research
- Vol. 221, 118786
Selective capture of ammonium ions from municipal wastewater treatment plant effluent with a nickel hexacyanoferrate electrode
- 21 June 2022
- Published by Elsevier in Water Research
- Vol. 221, 118786
Selective capture of ammonium ions from municipal wastewater treatment plant effluent with a nickel hexacyanoferrate electrode
- Open Access
- 17 June 2022
- Published by Springer Nature in npj Clean Water
- Vol. 5 (1) , 1-11
Shifts of microbial community structure along substrate concentration gradients in immobilized biomass for nitrogen removal
Immobilized biomass technology has been regarded as an effective strategy to enhance simultaneous nitrification and denitrification (SND) in existing aerobic biological wastewater treatment processes. Nevertheless, the mechanisms of SND in an aerobic immobilized biomass need to be proven. In this study, waste sludge from municipal wastewater treatment plants was immobilized by cellulose triacetate as bioplates, and an immobilized bioplate reactor (IBPR) was successfully established for nitrogen removal tests. The SND efficiency of the IBPR was increased 18% under the intermittent aeration (IA) mode compared with that under the continuous aeration (CA) mode. During IA operation, the IBPR achieved 96% COD removal and 76% NH4+-N removal, with 71% SND. The results of microbial community analysis by high-throughput sequencing showed that nitrogen-related functional bacteria were more abundant in the bioplates than in the attached biofilms. The colocalization of nitrifiers and denitrifiers in the bioplates was observed, and the microbial community of nitrogen-related functional bacteria clearly shifted with the substrate concentration gradients.
- 17 June 2022
- Published by Springer Nature in npj Clean Water
- Vol. 5 (1) , 1-11
Open AccessShifts of microbial community structure along substrate concentration gradients in immobilized biomass for nitrogen removal
Immobilized biomass technology has been regarded as an effective strategy to enhance simultaneous nitrification and denitrification (SND) in existing aerobic biological wastewater treatment processes. Nevertheless, the mechanisms of SND in an aerobic immobilized biomass need to be proven. In this study, waste sludge from municipal wastewater treatment plants was immobilized by cellulose triacetate as bioplates, and an immobilized bioplate reactor (IBPR) was successfully established for nitrogen removal tests. The SND efficiency of the IBPR was increased 18% under the intermittent aeration (IA) mode compared with that under the continuous aeration (CA) mode. During IA operation, the IBPR achieved 96% COD removal and 76% NH4+-N removal, with 71% SND. The results of microbial community analysis by high-throughput sequencing showed that nitrogen-related functional bacteria were more abundant in the bioplates than in the attached biofilms. The colocalization of nitrifiers and denitrifiers in the bioplates was observed, and the microbial community of nitrogen-related functional bacteria clearly shifted with the substrate concentration gradients.
- 24 May 2022
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 623, 985-991
Electrically regenerated ion-exchange technology: Leveraging faradaic reactions and assessing the effect of co-ion sorption
- 24 May 2022
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 623, 985-991
Electrically regenerated ion-exchange technology: Leveraging faradaic reactions and assessing the effect of co-ion sorption