Wenhui Xu
Research Subjects
Wenhui Xu has a total of 64 co-authors. Here are the top co-authors by number of shared publications:
- Tian Li
School of Mechanical Engineering, Purdue University, West Lafayette, USA
4 shared publications Xiaojie Liu
School of Mechanical Engineering, Purdue University, West Lafayette, USA
4 shared publicationsYanpei Tian
School of Mechanical Engineering, Purdue University, West Lafayette, USA
4 shared publicationsZhenyuan Niu
School of Mechanical Engineering, Purdue University, West Lafayette, USA
4 shared publications- Pengfei Deng
School of Mechanical Engineering, Purdue University, West Lafayette, USA
3 shared publications - Qilong Cheng
School of Mechanical Engineering, Purdue University, West Lafayette, USA
3 shared publications
Latest Publications
- Open Access
- 24 August 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1) , 10134
Living co-culture fabrication for biologically crosslinked mycelium–cellulose hydrogels and films
Living materials, owing to their inherent capacities for growth, self-healing, sensing, and adaptation, have attracted widespread attention in recent years. However, controlling growth of living matter to achieve robust and tunable material properties remains a challenge. Here, we report a co-culture strategy that integrates mycelial microfibers with bacterial cellulose nanofibers into hierarchical hydrogels and transparent films. The biological crosslinking between fungal cell wall mannans and cellulose chains yields an interpenetrating micro–nano network with enhanced interfacial hydrogen bonding. As a result, the films achieve simultaneous high tensile strength (195.62 ± 9.06 MPa) and toughness (11.51 ± 0.94 MJ m –3 ), surpassing most reported biodegradable films. The micro-nano architecture also enables wide-range optical tunability: haze increases from 16.0% to 78.5% while maintaining approximately 80% transparency by controlling culture duration. Mycelium/bacterial cellulose films with tailored properties are promising candidates for applications such as radiative cooling coatings on outdoor displays. This strategy demonstrates a generalizable principle for programming material structure and properties through microbial activity, offering a green pathway toward next-generation sustainable films for transparent radiative cooling, flexible electronics, and optical devices.
- 24 August 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1) , 10134
Open AccessLiving co-culture fabrication for biologically crosslinked mycelium–cellulose hydrogels and films
Living materials, owing to their inherent capacities for growth, self-healing, sensing, and adaptation, have attracted widespread attention in recent years. However, controlling growth of living matter to achieve robust and tunable material properties remains a challenge. Here, we report a co-culture strategy that integrates mycelial microfibers with bacterial cellulose nanofibers into hierarchical hydrogels and transparent films. The biological crosslinking between fungal cell wall mannans and cellulose chains yields an interpenetrating micro–nano network with enhanced interfacial hydrogen bonding. As a result, the films achieve simultaneous high tensile strength (195.62 ± 9.06 MPa) and toughness (11.51 ± 0.94 MJ m –3 ), surpassing most reported biodegradable films. The micro-nano architecture also enables wide-range optical tunability: haze increases from 16.0% to 78.5% while maintaining approximately 80% transparency by controlling culture duration. Mycelium/bacterial cellulose films with tailored properties are promising candidates for applications such as radiative cooling coatings on outdoor displays. This strategy demonstrates a generalizable principle for programming material structure and properties through microbial activity, offering a green pathway toward next-generation sustainable films for transparent radiative cooling, flexible electronics, and optical devices.
- 15 June 2026
- Published by Springer Nature in Nature Water
- Vol. 4 (7) , 905-916
Living mycelium biomulch for directed atmospheric water capture and soil irrigation
- 15 June 2026
- Published by Springer Nature in Nature Water
- Vol. 4 (7) , 905-916
Living mycelium biomulch for directed atmospheric water capture and soil irrigation
- 23 April 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (17) , 12812-12821
Architectural Self-Assembled Fungal Mycelium for Nanofluidic Ion Regulation
Conventional nanofluidic platforms rarely achieve the simultaneous combination of ion regulation, structural tunability, and scalable fabrication. Here, we demonstrate using fungal mycelium as a self-grown morphology-adaptable nanofluidic medium. Leveraging the natural growth of blue oyster mycelium, we directly fabricate 1D twisted fibers, 2D membranes, and 3D foams─without chemical modification─through simple lyophilization and mechanical shaping. These architectures preserve interconnected hyphal nanochannels with a naturally negative surface charge (−1.85 to −2.77 mC m–2, tunable via growth time), enabling stable ionic conductivities of 0.2–0.5 mS cm–1 in dilute potassium chloride (KCl) electrolyte (–3 mol L–1), several orders of magnitude above bulk values. Distinct from inorganic and polymeric analogues, the mycelium-based nanofluidic material system is shape-adaptable, flexible, biocompatible, and environmentally benign, offering a scalable pathway to green shape-adaptable ionic devices. By uniting intrinsic biological architectures with engineering control, this work establishes fungal mycelium as an emerging platform for next-generation nanofluidics.
- 23 April 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (17) , 12812-12821
Architectural Self-Assembled Fungal Mycelium for Nanofluidic Ion Regulation
Conventional nanofluidic platforms rarely achieve the simultaneous combination of ion regulation, structural tunability, and scalable fabrication. Here, we demonstrate using fungal mycelium as a self-grown morphology-adaptable nanofluidic medium. Leveraging the natural growth of blue oyster mycelium, we directly fabricate 1D twisted fibers, 2D membranes, and 3D foams─without chemical modification─through simple lyophilization and mechanical shaping. These architectures preserve interconnected hyphal nanochannels with a naturally negative surface charge (−1.85 to −2.77 mC m–2, tunable via growth time), enabling stable ionic conductivities of 0.2–0.5 mS cm–1 in dilute potassium chloride (KCl) electrolyte (–3 mol L–1), several orders of magnitude above bulk values. Distinct from inorganic and polymeric analogues, the mycelium-based nanofluidic material system is shape-adaptable, flexible, biocompatible, and environmentally benign, offering a scalable pathway to green shape-adaptable ionic devices. By uniting intrinsic biological architectures with engineering control, this work establishes fungal mycelium as an emerging platform for next-generation nanofluidics.
- 20 November 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (48) , 40774-40788
Biomass-Based Nanoengineered Cooling Geotextile for Permafrost Thawing Prevention
Permafrost thawing is a critical climate tipping point, with catastrophic consequences. Existing stabilization methods rely on refrigerant-based systems, such as thermosyphons and active refrigeration, which are capital-intensive, energy-demanding, or increasingly ineffective in warming climates. Most infrastructure built on permafrost requires continuous heat removal from the foundation as the underlying permafrost becomes progressively unstable. To address these challenges, we demonstrate a fully biomass-derived cooling geotextile that can effectively mitigate permafrost thawing through scalable nanoprocessing via a roll-to-roll fabrication (1.3 m·min-1). The cooling geotextile features a hierarchical three-layer design: a strong woven biomass scaffold, a permeable nonwoven fiber network, and an optimized porous coating layer with micro- and nano-structures. When anchored to bare ground, it extracts heat to the cold sky, enhances albedo from ∼30% to 96.3%, and establishes a thermal barrier between soil and air. Engineered for Arctic durability, it withstands strong winds, extreme cold, and freeze-thaw cycles, exceeding the American National Engineering Handbook requirements (tensile strength 1,682 kg; tear strength 191 kg; puncture strength 61 kg). Field tests in West Lafayette, IN (40°25'21″N, 86°55'12″W) reveal up to 25 °C soil cooling under 500 W·m-2 irradiance. Its lightweight (0.8 kg·m-2) and rollable attributes enable scalable and fast localized deployment. Simulations predict up to 12 °C surface cooling during Arctic summer (2020-2050), preventing up to 40,000 km2 of permafrost from thawing. Completely derived from biomass, cooling geotextile ensures a low carbon footprint (0.7 kg·m-2), positioning itself as a sustainable solution for reinforcing Arctic coastline, reconstructing thawing landscape, and restoring the environment.
- 20 November 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (48) , 40774-40788
Biomass-Based Nanoengineered Cooling Geotextile for Permafrost Thawing Prevention
Permafrost thawing is a critical climate tipping point, with catastrophic consequences. Existing stabilization methods rely on refrigerant-based systems, such as thermosyphons and active refrigeration, which are capital-intensive, energy-demanding, or increasingly ineffective in warming climates. Most infrastructure built on permafrost requires continuous heat removal from the foundation as the underlying permafrost becomes progressively unstable. To address these challenges, we demonstrate a fully biomass-derived cooling geotextile that can effectively mitigate permafrost thawing through scalable nanoprocessing via a roll-to-roll fabrication (1.3 m·min-1). The cooling geotextile features a hierarchical three-layer design: a strong woven biomass scaffold, a permeable nonwoven fiber network, and an optimized porous coating layer with micro- and nano-structures. When anchored to bare ground, it extracts heat to the cold sky, enhances albedo from ∼30% to 96.3%, and establishes a thermal barrier between soil and air. Engineered for Arctic durability, it withstands strong winds, extreme cold, and freeze-thaw cycles, exceeding the American National Engineering Handbook requirements (tensile strength 1,682 kg; tear strength 191 kg; puncture strength 61 kg). Field tests in West Lafayette, IN (40°25'21″N, 86°55'12″W) reveal up to 25 °C soil cooling under 500 W·m-2 irradiance. Its lightweight (0.8 kg·m-2) and rollable attributes enable scalable and fast localized deployment. Simulations predict up to 12 °C surface cooling during Arctic summer (2020-2050), preventing up to 40,000 km2 of permafrost from thawing. Completely derived from biomass, cooling geotextile ensures a low carbon footprint (0.7 kg·m-2), positioning itself as a sustainable solution for reinforcing Arctic coastline, reconstructing thawing landscape, and restoring the environment.
- Open Access
Highly Tunable Cellulosic Hydrogels with Dynamic Solar Modulation for Energy‐Efficient Windows
Smart windows that can passively regulate incident solar radiation by dynamically modulating optical transmittance have attracted increasing scientific interest due to their potential economic and environmental savings. However, challenges remain in the global adoption of such systems, given the extreme variability in climatic and economic conditions across different geographical locations. Aiming these issues, a methylcellulose (MC) salt system is synthesized with high tunability for intrinsic optical transmittance (89.3%), which can be applied globally to various locations. Specifically, the MC window exhibits superior heat shielding potential below transition temperatures, becoming opaque at temperatures above the Lower Critical Solution Temperature and reducing the solar heat gain by 55%. This optical tunability is attributable to the particle size change triggered by the temperature‐induced reversible coil‐to‐globular transition. This leads to effective refractive index and scattering modulation, making them prospective solutions for light management systems, an application ahead of intelligent fenestration systems. During the field tests, MC‐based windows demonstrated a 9 °C temperature decrease compared to double‐pane windows on sunny days and a 5 °C increase during winters, with simulations predicting an 11% energy savings. The ubiquitous availability of materials, low cost, and ease‐of‐manufacturing will provide technological equity and foster the ambition toward net‐zero buildings.
Open AccessHighly Tunable Cellulosic Hydrogels with Dynamic Solar Modulation for Energy‐Efficient Windows
Smart windows that can passively regulate incident solar radiation by dynamically modulating optical transmittance have attracted increasing scientific interest due to their potential economic and environmental savings. However, challenges remain in the global adoption of such systems, given the extreme variability in climatic and economic conditions across different geographical locations. Aiming these issues, a methylcellulose (MC) salt system is synthesized with high tunability for intrinsic optical transmittance (89.3%), which can be applied globally to various locations. Specifically, the MC window exhibits superior heat shielding potential below transition temperatures, becoming opaque at temperatures above the Lower Critical Solution Temperature and reducing the solar heat gain by 55%. This optical tunability is attributable to the particle size change triggered by the temperature‐induced reversible coil‐to‐globular transition. This leads to effective refractive index and scattering modulation, making them prospective solutions for light management systems, an application ahead of intelligent fenestration systems. During the field tests, MC‐based windows demonstrated a 9 °C temperature decrease compared to double‐pane windows on sunny days and a 5 °C increase during winters, with simulations predicting an 11% energy savings. The ubiquitous availability of materials, low cost, and ease‐of‐manufacturing will provide technological equity and foster the ambition toward net‐zero buildings.
- Top Cited Papers
- 1 June 2022
- Published by Springer Nature in Nature
- Vol. 606 (7912) , 94-101
A tissue-like neurotransmitter sensor for the brain and gut
Neurotransmitters play essential roles in regulating neural circuit dynamics both in the central nervous system as well as at the peripheral, including the gastrointestinal tract1,2,3. Their real-time monitoring will offer critical information for understanding neural function and diagnosing disease1,2,3. However, bioelectronic tools to monitor the dynamics of neurotransmitters in vivo, especially in the enteric nervous systems, are underdeveloped. This is mainly owing to the limited availability of biosensing tools that are capable of examining soft, complex and actively moving organs. Here we introduce a tissue-mimicking, stretchable, neurochemical biological interface termed NeuroString, which is prepared by laser patterning of a metal-complexed polyimide into an interconnected graphene/nanoparticle network embedded in an elastomer. NeuroString sensors allow chronic in vivo real-time, multichannel and multiplexed monoamine sensing in the brain of behaving mouse, as well as measuring serotonin dynamics in the gut without undesired stimulations and perturbing peristaltic movements. The described elastic and conformable biosensing interface has broad potential for studying the impact of neurotransmitters on gut microbes, brain–gut communication and may ultimately be extended to biomolecular sensing in other soft organs across the body.
- 1 June 2022
- Published by Springer Nature in Nature
- Vol. 606 (7912) , 94-101
Top Cited PapersA tissue-like neurotransmitter sensor for the brain and gut
Neurotransmitters play essential roles in regulating neural circuit dynamics both in the central nervous system as well as at the peripheral, including the gastrointestinal tract1,2,3. Their real-time monitoring will offer critical information for understanding neural function and diagnosing disease1,2,3. However, bioelectronic tools to monitor the dynamics of neurotransmitters in vivo, especially in the enteric nervous systems, are underdeveloped. This is mainly owing to the limited availability of biosensing tools that are capable of examining soft, complex and actively moving organs. Here we introduce a tissue-mimicking, stretchable, neurochemical biological interface termed NeuroString, which is prepared by laser patterning of a metal-complexed polyimide into an interconnected graphene/nanoparticle network embedded in an elastomer. NeuroString sensors allow chronic in vivo real-time, multichannel and multiplexed monoamine sensing in the brain of behaving mouse, as well as measuring serotonin dynamics in the gut without undesired stimulations and perturbing peristaltic movements. The described elastic and conformable biosensing interface has broad potential for studying the impact of neurotransmitters on gut microbes, brain–gut communication and may ultimately be extended to biomolecular sensing in other soft organs across the body.