Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Shuai Wang has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Calculation algorithm of additional stresses in irregularly shaped foundation soils under non-uniform loading

    by Shuai Wang, Zechu Zhang, Xiangdong Zhang

    The classical calculation method of additional stresses in foundation soils was established based on the Flamant and Boussinesq solutions in elasticity theory. This method can only calculate the additional stresses in foundations with regular shapes and under regularly distributed base pressures. Based on the Gauss–Legendre numerical product formula, which is independent of the specific form of the product function, a suitable method for calculating the additional stresses in irregularly shaped foundation soils under non-uniform loads was established in this study. Using Simpson’s formula to perform integration over the domain, Gaussian summation calculation methods for the additional stresses in foundation soil under non-uniform loads in rectangular domains, under loads in non-rectangular domains, and under irregular loads and loads in irregular integration regions were derived. The combination of the complex product algorithm and a computer program further efficiently improved the calculation accuracy. Validation examples showed that the Gaussian product calculation method of additional stresses in foundation soil was completely consistent with classical elasticity theory, and the results of the Gaussian product calculation method converged to the classical elasticity theory prediction when the complex product formula was applied. Based on validation and application examples, the method has advantages over the finite element method in terms of modeling difficulty, computational accuracy, computational volume, and computational cost when calculating additional stresses in foundation soil. The research results provide a new method and idea for the calculation of additional stresses in irregularly shaped flexible foundation soils under non-uniform loads.


  • Open Access

    D'Alembert solution of point-source shear waves and the coupled displacement field of dilation and torsion

    by Shuai Wang, Jiawei Kang, Baoxin Jia

    The analytical representation and underlying mechanism of displacement fields induced by point source are of notable engineering significance and value. The displacement field generated by a point source consists of an irrotational longitudinal wave induced by a dilatational source and a rotational shear wave excited by a torsional source. The D'Alembert solution accounting for geometric attenuation is applied to the formulation of spherical longitudinal waves from point sources and 2-dimensional (2D) transverse waves from point sources. Moreover, the relationship between this solution and the governing differential equation for 2D point-source shear waves is elucidated. By employing the stream function for 2D shear waves and the potential function for spherical longitudinal waves, both derived from a D'Alembert-type solution, and integrating relevant results from fluid mechanics, the complex potentials corresponding to displacement flux sources and displacement vortex sources are obtained. Based on the commonality between point-source vector elastic wave fields and other point-source vector fields encountered in engineering, the displacement field generated by point source is expressed—according to Helmholtz's theorem—as a superposition of an irrotational field and a solenoidal field. The irrotational field is excited by a displacement flux source, while the solenoidal field is generated by a displacement vortex source. The steady-state results obtained from the finite element method are consistent with those derived from the analytical solution, validating the correctness of the theoretical derivation. Consequently, the analytical representation and physical mechanism of the displacement field induced by the point source are established.

  • Open Access

    Mine seismic source location via forward modeling of spherical waves in a multilayered horizontal or inclined medium

    by Shuai Wang, Zhaoxin Hu, Sha-Sha Lu

    Seismic source location is a classic inverse problem in seismology. In mathematical physics, inverse problems have multiple natural solutions. The objective of this study was to develop a generic theory and method of seeking the true solution from multiple solutions for the location of a coal mine seismic source in an idealized velocity structure model of a coal mine with a small scale and complex geological environment. Starting from the simplest velocity structure model, the complexity of the model gradually increased, until it approached the real velocity structure model, i.e., the multilayered horizontal and inclined velocity structure model, in order to find a generic method for solving the multi-solution inverse problem of coal mine seismic source location. Specifically, the wavefront distribution equation in a two-layer horizontal medium was derived and then expanded to any multi-layer horizontal medium. Based on this equation, a positive definite nonlinear equation system was established from the perspective of any observation system. The equation system contained four unknown variables of the spatiotemporal position of the seismic source. To determine the spatiotemporal parameters of the seismic source, nonlinear equations for four stations were required. To solve the nonlinear equation system, an initial iteration value was determined. In order to reduce the difficulty of determining the initial iteration value, the variable substitution method was used to reduce the number of location parameters. By rotating the original geodetic coordinate system of the station to be parallel and orthogonal to the medium interface, the wavefront method was extended to inclined medium. In conclusion, in this study, the problem of coal mine seismic source location in a multi-layer horizontal or inclined medium was effectively solved. The method proposed in this study provides a reference for solving the true solution from multiple solutions for the location of a coal mine seismic source in small-scale coal mines with complex geological environments.


  • Design and analysis of nonlinear numerical algorithm for seismic response of structures based on HVSR algorithm

    by Shuai Wang, Chao Wang, Zongbao Zhang

    Earthquake is one of the main factors causing structural disasters in current buildings. Under earthquake action, adjacent building structures are generally in different vibration stages, and collisions may occur in the structures, which may cause serious damage to the structure. In order to prevent certain earthquakes from damaging the designed buildings, this article mainly introduced the design and analysis of a numerical algorithm for seismic nonlinear structural dynamic response based on the HVSR algorithm. This article evenly divided the acceleration response time series into 15 time periods and then selected the position corresponding to the peak point of instantaneous amplitude within each period as the selected data point position. The same seismic load can be applied at the bottom of the established nonlinear model to extract the dynamic response data of the top layer of the structure, and then, the instantaneous amplitude and corresponding instantaneous phases and frequencies of the main components of the structural dynamic response can be extracted through the time-varying filter and Hilbert transform based on the discrete analytic mode decomposition. Under the influence of these four ground motions, the collision force within the range of 0–50 kN accounted for over 87% of the total number of collisions. In the comparison results of collision response to peak displacement, the four ground motions all led to structural collision, and the collision inhibited the positive peak displacement response of node 1512. Compared with noncollision, the peak displacement was reduced by 27.273, 33.675, 27.727, and 37.248%, respectively. The peak displacement of 1512 nodes was suppressed and reduced by 18.856%. The results indicate that the HVSR algorithm can obtain the instantaneous characteristic parameters of nonlinear structural dynamic response and achieve model correction.


  • Open Access

    Prediction of stability coefficient of open-pit mine slope based on artificial intelligence deep learning algorithm

    by Shuai Wang, Zongbao Zhang, Chao Wang

    The mining of open pit mines is widespread in China, and there are many cases of landslide accidents. Therefore, the problem of slope stability is highlighted. The stability of the slope is a factor that directly affects the mining efficiency and the safety of the entire mining process. According to the statistics, there is a 15 percent chance of finding landslide risk in China’s large-scale mines. And due to the expansion of the mining scale of the enterprise, the problem of slope stability has become increasingly obvious, which has become a major subject in the study of open-pit mine engineering. In order to better predict the slope stability coefficient, this study takes a mine in China as a case to deeply discuss the accuracy of different algorithms in the stability calculation, and then uses a deep learning algorithm to study the stability under rainfall conditions. The change of the coefficient and the change of the stability coefficient before and after the slope treatment are experimentally studied with the displacement of the monitoring point. The result shows that the safety coefficient calculated by the algorithm in this paper is about 7% lower than that of the traditional algorithm. In the slope stability analysis before treatment, the safety factor calculated by the algorithm in this paper is 1.086, and the algorithm in this paper is closer to reality. In the stability analysis of the slope after treatment, the safety factor calculated by the algorithm in this paper is 1.227, and the stability factor meets the requirements of the specification. It also shows that the deep learning algorithm effectively improves the efficiency of the slope stability factor prediction and improves security during project development.


  • Open Access

    Design and Analysis of Nonlinear Numerical Algorithm for Seismic Response of Structures Based on HVSR Algorithm

    by Shuai Wang, Chao Wang, Zongbao Zhang

    Earthquakes are one of the main factors that cause structural disasters in current buildings. Under the action of earthquakes, adjacent building structures are generally in different vibration phases, and the structures are likely to collide with each other, and collisions may cause serious damage to the structure. In order to prevent damage to the designed buildings under certain earthquakes, this paper mainly focuses on the design and analysis of numerical algorithms for seismic nonlinear structural dynamic responses based on the HVSR algorithm. In the two-dimensional finite element analysis in this paper, the dam rockfill body adopts four-node isoparametric elements, and the equivalent linear model related to dynamic shear strain is used to reflect the dynamic nonlinear characteristics of the dam material. When the dynamic response is used as the constraint condition, the dynamic response can be used to judge whether the design variables meet the requirements; when the dynamic response is used as the optimization target, it is the optimization result of each step. Considering the importance of the instantaneous amplitude of acceleration response in the correction of nonlinear structure model. The acceleration response time series is divided into 15 time periods uniformly, and then the position corresponding to the peak point of the instantaneous amplitude in each time period is selected as the selected data point position. Apply the same seismic load to the bottom of the established nonlinear model, extract the dynamic response data of the top layer of the structure, and then extract the instantaneous amplitude of the main component of the structural dynamic response through the time-varying filter and Hilbert transform based on discrete analytical mode decomposition and the corresponding the instantaneous frequency. Under the action of these four ground motions, the collision force in the range of 0~50kN accounts for more than 87% of the total number of collisions. The results show that the HVSR algorithm can obtain the instantaneous characteristic parameters of the dynamic response of the nonlinear structure and realize the correction of the model.

  • Open Access

    Prediction of Stability Coefficient of Open-Pit Mine Slope Based on Artificial Intelligence Deep Learning Algorithm

    by Shuai Wang, Zongbao Zhang, Chao Wang

    The mining of open pit mines is very common in China, and there are many cases of landslide accidents. Therefore, the problem of slope stability is highlighted. The stability of the slope is a factor that directly affects the mining efficiency and the safety of the entire mining process. According to statistics, there is a 15 percent chance of finding landslide risks in China's large-scale mines. And due to the expansion of the mining scale of the enterprise, the problem of slope stability has become more and more obvious, which has become a major subject in the study of open-pit mine engineering. In order to better predict the slope stability coefficient, this study takes a mine in China as a case to deeply discuss the accuracy of different algorithms in the stability calculation, and then uses a deep learning algorithm to study the stability under rainfall conditions. The change of the coefficient and the change of the stability coefficient before and after the slope treatment are experimentally studied on the displacement of the monitoring point. The result shows that the safety coefficient calculated by the algorithm in this paper is about 7% lower than that of the traditional algorithm. In the slope stability analysis before treatment, the safety factor calculated by the algorithm in this paper is 1.086, and the algorithm in this paper is closer to reality. In the stability analysis of the slope after treatment, the safety factor calculated by the algorithm in this paper is 1.227, and the stability factor meets the requirements of the specification. It also shows that the deep learning algorithm effectively improves the efficiency of the slope stability factor prediction and improves Security during project development.


  • Retracted
    Open Access

    [Retracted] Research on Microseismic Source Location Method Based on Waveform Characteristics Monitored by Nanomaterial Sensor under the Background of Metal Oxide Polluted Environment

    by Shuai Wang, Zhaoxin Hu, Shasha Lu

    In recent years, the monitoring range of source location technology has developed from being one‐dimensional and two‐dimensional to being three‐dimensional. However, due to the complexity and nonuniformity of the seismic wave propagation medium and the uncertainty of the propagation law, there will be large errors in the source location results. Therefore, the analysis of vibration signal has become the key problem of current research. This paper designs a microseismic monitoring system based on Internet of Things sensors, which can monitor the vibration wave characteristics of vibration signals. In order to test the positioning accuracy of the system, this paper introduces three positioning methods: target positioning method based on time difference, time delay estimation method based on EMD, and source target positioning method based on the characteristic frequency of vibration signal. The purpose of this paper is to find the most accurate method from the three source location methods. Through these three methods, the vibration source generated by a single person walking in situ can be located in the vibration positioning experiment of human walking. The error between the actual position and the measurement source position is compared. The results show that the time delay estimation method based on empirical mode decomposition has the highest positioning accuracy. In addition, in the microseismic experiment, it is proved that the positioning accuracy of EMD using L1 norm statistical criterion is higher than that using L2 norm statistical criterion.


  • Open Access

    Application of Digital Image Processing Technology in Automatic Recognition Algorithm of Rock Microseismic Events in Mining Area under the Background of Mobile Communication

    by Shuai Wang, Penghe Liu, Shasha Lu

    In all kinds of production, the changes of the times and scientific and technological progress make us have higher requirements for monitoring data. In order to improve the accuracy of mine rock microseismic monitoring and the sensitivity and specificity of mine disaster early warning, it is very important to use the change of light and material vibration to monitor environmental changes. This paper is the design of an optical hardware system, which improves the traditional system, uses the change of light wave to detect the spatial change, and forms a nano digital imaging photography (ndip) system to collect more detailed data. The three-year field experiment under the guidance of a simulation experiment shows that the system has higher monitoring sensitivity, early warning sensitivity, and specificity than the laser gyroscope system, but its antidust interference ability is low, so it cannot replace the laser gyroscope system in a short time, but it can supplement and realize data fusion analysis.