Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Laura Cervera-Gabalda has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Spin crossover in Fe(4X-isonicotinate) 2 [Fe(CN) 5 NO] with X = methyl and ethyl: the effect of the 4X substituent size on the spin transition

    by Monica C. Vazquez, Y. Avila, Rodrigo Mojica, Laura Cervera-Gabalda, Itziar Galarreta-Rodríguez, Marlene M. González, Joelis Rodríguez-Hernández, Juan Rubio-Zuazo, Edilso Reguera

    The effect of the substituent (X) size on SCO was investigated in the Fe(4X-isonicotinate) 2 [Fe(CN) 5 NO] series with X = methyl or ethyl.


  • Open Access

    Nanoscale Engineering of Cobalt–Gallium Co-Doped Ferrites: A Strategy to Enhance High-Frequency Theranostic Magnetic Materials

    by Itziar Galarreta-Rodríguez, Deborah Liguori, Eneko Garaio, Beatrice Muzzi, Laura Cervera-Gabalda, Juan Rubio-Zuazo, Guilherme Gomide, Jerome Depeyrot, Alberto López-Ortega

    The nanoscale engineering of doped iron oxide magnetic nanoparticles has attracted significant interest in recent years for high-frequency theragnostic applications, where simultaneous diagnosis and therapy are required. In particular, their ability to generate localized heating under alternating magnetic fields makes them ideal candidates for magnetic hyperthermia, a noninvasive cancer treatment technique. However, understanding the complex interplay between multiple dopant cations and their impact on dynamic magnetic behavior remains a significant challenge. In this work, we present a comprehensive study on how two differently marked cations (Co2+ and Ga3+) can modify both the magnetic properties of these nanoparticles and their efficiency in heat generation under alternating magnetic fields. To this end, a series of nanoparticles with the formula Co x Ga0.15Fe2.85‑x O4 (0 < x < 0.3) was prepared via thermal decomposition, enabling the production of monodisperse nanocrystals with high crystallinity and precise stoichiometric control. Their exhaustive structural and magnetic characterization confirmed site-selective incorporation of Ga3+ into tetrahedral sites and Co2+ into octahedral sites. Increasing the cobalt content within the gallium-doped framework leads to enhanced magnetocrystalline anisotropy and higher saturation magnetization, both crucial parameters for efficient heat dissipation in magnetic hyperthermia. The study further demonstrates that the dynamic magnetic response of these nanostructures is strongly influenced by the interplay between doping composition, anisotropy, and the amplitude of the applied magnetic field. These findings highlight the effectiveness of nanoscale codoping strategies in fine-tuning magnetic behavior and optimizing the performance of spinel ferrite nanoparticles for advanced biomedical and technological applications, particularly high-frequency magnetic hyperthermia.


  • Open Access

    Antibacterial performance of Co–Zn ferrite nanoparticles under visible light irradiation

    by Alicia G. Gubieda, Ana Abad‐Díaz‐De‐Cerio, Ana García‐Prieto, M. Luisa Fdez‐Gubieda, Laura Cervera‐Gabalda, Eduardo Ordoqui‐Huesa, Alfonso Cornejo, Cristina Gómez‐Polo

    BACKGROUND: To address water scarcity and promote sustainable resource management, more efficient and cost‐effective water treatment solutions are necessary. Particularly, pathogens in drinking water are a topic of growing concern. One promising technology is the use of photocatalytic nanoparticles activated by visible light as antibacterial agents. This study focuses on the characterization and antibacterial properties of Co–Zn ferrite nanocatalysts, tested against Escherichia coli.RESULTS: The CoxZn1−xFe2O4 (x = 0, 0.1, 0.4 and 0.6) ferrites were synthesized by the co‐precipitation method. Structural, morphological and optical analyses confirmed that these nanoparticles have a cubic spinel structure, with sizes of around 10 nm, and band gap energies suitable for visible light activation (1.4–1.7 eV). The antibacterial efficacy of the nanoparticles against E. coli was tested and compared with their photocatalytic performance employing phenol as organic pollutant model (highest phenol degradation for x = 0.6). Specifically, the antibacterial capacity of these nanoparticles was evaluated by comparing the ability of bacteria to grow after being incubated with the nanoparticles under visible light and in the dark. It was found that nanoparticles with lower cobalt content (x = 0 and 0.1) significantly reduced bacterial culturability under visible light. Transmission Electron Microscopy analysis revealed that nanoparticles with cobalt content caused bacteria to secrete biofilm, potentially offering some protection against the nanoparticles.CONCLUSION: ZnFe2O4 nanoparticles show the highest antibacterial effect amongst those tested. This is attributed to the combined action of Zn2+ ion release and the photocatalytic effect under visible light. Furthermore, Zn might inhibit protective biofilm secretion, leading to higher antibacterial effects. © 2024 The Author(s). Journal of Chemical Technology and Biotechnology published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry (SCI).


  • Fe3O4–SiO2 Mesoporous Core/Shell Nanoparticles for Magnetic Field-Induced Ibuprofen-Controlled Release

    by Lucia García, Eneko Garaio, Alberto López-Ortega, Itziar Galarreta-Rodriguez, Laura Cervera-Gabalda, Guillermo Cruz-Quesada, Alfonso Cornejo, Julián J. Garrido, Cristina Gómez-Polo, José Ignacio Pérez-Landazábal

    Hybrid magnetic nanoparticles made up of an iron oxide, Fe3O4, core and a mesoporous SiO2 shell with high magnetization and a large surface area were proposed as an efficient drug delivery platform. The core/shell structure was synthesized by two seed-mediated growth steps combining solvothermal and sol-gel approaches and using organic molecules as a porous scaffolding template. The system presents a mean particle diameter of 30(5) nm (9 nm magnetic core diameter and 10 nm silica shell thickness) with superparamagnetic behavior, saturation magnetization of 32 emu/g, and a significant AC magnetic-field-induced heating response (SAR = 63 W/gFe3O4, measured at an amplitude of 400 Oe and a frequency of 307 kHz). Using ibuprofen as a model drug, the specific surface area (231 m2/g) of the porous structure exhibits a high molecule loading capacity (10 wt %), and controlled drug release efficiency (67%) can be achieved using the external AC magnetic field for short time periods (5 min), showing faster and higher drug desorption compared to that of similar stimulus-responsive iron oxide-based nanocarriers. In addition, it is demonstrated that the magnetic field-induced drug release shows higher efficiency compared to that of the sustained release at fixed temperatures (47 and 53% for 37 and 42 °C, respectively), considering that the maximum temperature reached during the exposure to the magnetic field is well below (31 °C). Therefore, it can be hypothesized that short periods of exposure to the oscillating field induce much greater heating within the nanoparticles than in the external solution.


  • Open Access

    Magnetic Fe/Fe3C@C Nanoadsorbents for Efficient Cr (VI) Removal

    by Laura Cervera-Gabalda, Cristina Gómez-Polo

    Magnetic carbon nanocomposites (α-Fe/Fe3C@C) synthesized employing fructose and Fe3O4 magnetite nanoparticles as the carbon and iron precursors, respectively, are analyzed and applied for the removal of Cr (VI). Initial citric acid-coated magnetite nanoparticles, obtained through the co-precipitation method, were mixed with fructose (weight ratio 1:2) and thermally treated at different annealing temperatures (Tann = 400, 600, 800, and 1000 °C). The thermal decomposition of the carbon matrix and the Fe3O4 reduction was followed by thermogravimetry (TGA) and Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction, Raman spectroscopy, SQUID magnetometry, and N2 adsorption–desorption isotherms. A high annealing temperature (Tann = 800 °C) leads to optimum magnetic adsorbents (high magnetization enabling the magnetic separation of the adsorbent from the aqueous media and large specific surface area to enhance the pollutant adsorption process). Cr (VI) adsorption tests, performed under weak acid environments (pH = 6) and low pollutant concentrations (1 mg/L), confirm the Cr removal ability and reusability after consecutive adsorption cycles. Physical adsorption (pseudo-first-order kinetics model) and multilayer adsorption (Freundlich isotherm model) characterize the Cr (VI) absorption phenomena and support the enhanced adsorption capability of the synthesized nanostructures.


  • Open Access

    Iron based nanostructures: synthesis, characterization and environmental applications

    by Laura María Cervera Gabalda

    Environmental pollution has become a topic of public concern in recent years. Due to different activities, organic and inorganic compounds end up in the environment mainly affecting water sources and air quality. There are numerous methods employed for pollutant removal. Among them, adsorption method stands out due to its simplicity, low-cost and high efficiency. The stability, porosity, high surface area, electron transfer ability, among other properties, make nanomaterials widely used as pollutant removal. Particularly, magnetic nanostructures are extensively employed as promising adsorbents due to the possibility to separate them from the environment in which they are immersed employing an external magnetic field. This feature also enhances the possibility of recycling and reusing these nanomaterials to reduce process costs. Specifically, iron carbon based nanomaterials are proposed as highly efficient adsorbents due to the high adsorption capacity of carbon. Moreover, the natural abundance of iron, low cost, magnetic and chemical properties, and low toxicity makes these nanomaterials very interesting for their application in the environmental remediation field. Furthermore, photocatalysts have also interest for their applications as pollutant removal. In this context, again, magnetic nanoparticles have gained attention due to their physicochemical properties. Particularly, spinel ferrites with different cations are employed for their use as photocatalysts due to the possibility to design ferrites with narrow band-gaps and optimum magnetic and photocatalytic properties. Specifically, in this thesis Co-Zn ferrites have been analyzed as visible light photocatalytic materials. Firstly, Fe-C based nanostructures have been synthesized employing three different procedures having as common research strategy the use of sugar (glucose, fructose or sucrose) as carbon source. The first process consists of mixing iron salts (Fe3+) with different sugars as carbon source in an aqueous solution. Then the solution is dried and annealed at different temperatures. The second synthesis process to obtain Fe-C nanostructures is based on the reduction of Fe3O4 nanoparticles employing the thermal decomposition of fructose. Finally, Magnetic Induction Heating (MIH) has been explored as a novel method to carbon coat Fe3O4 magnetic nanoparticles. The obtained nanostructures from each method have been structurally characterized employing different techniques such as Thermal Gravimetric Analysis (TGA), Fourier-Transform Infrared Spectroscopy (FTIR), X-ray diffraction, Electron Microscopy (TEM/STEM), or Raman spectroscopy. Magnetic characterization of the samples has been carried out by SQUID magnetrometry. The combination of the structural and magnetic characterization has allowed to comparatively anayze the different employed synthesis methods to obtain Fe-C nanostructures. Once the Fe-C nanostructures have been widely characterized, the adsorption capacities of some selected samples obtained by each method have been evaluated as well as their reusability. For that purpose, Cr (VI) and phenol have been chosen as inorganic and organic pollutant models, respectively. Additionally, MIH has been studied as an alternative phenol desorption method and compared to a conventional heat treatment. Finally, CoxZn1-xFe3O4 nanoparticles have been synthesized employing the co-precipitation method. They have been structurally (X-Ray diffraction, X-Ray fluorescence spectroscopy, and Scanning Transmission Electron Microscopy), optically (UV-Vis diffuse reflectance spectroscopy and Photoluminescence spectroscopy), and magnetically (SQUID magnetometry) characterized. Additionally, Inductively Coupled Plasma Optical Emission spectroscopy, specific surface area, and Zeta Potential measurements have been carried out to complete the characterization of the nanoparticles. The photocatalytic activity of the Co-Zn ferrites has been evaluated employing phenol and toluene as water and air pollutant models, respectively.