Nadezhda L. Kornilova
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Nadezhda L. Kornilova has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
- Svetlana V. Aleeva
G.A. Krestov Institute of Solution Chemistry of the Russian Academy of Sciences, Ivanovo, Russia
5 shared publications - A. E. Gorelova
Ivanovo State Polytechnic University, 153000, Ivanovo, Russia
3 shared publications - Albina A Bikbulatova
Institute of Industrial Engineering, Information Technology and Mechatronics, Moscow State University of Food Production, Volokolamskoe Highway, 11, 125080 Moscow, Russia
3 shared publications - Sergey Aleksandrovich Koksharov
Russian Academy of Sciences
3 shared publications - Aleksandr Stakhiev
Peter the Great St. Petersburg Polytechnic University
2 shared publications - Alina Cherkas
Peter the Great St. Petersburg Polytechnic University
2 shared publications
Latest Publications
- Open Access
- 16 May 2025
- Published by Ivanovo State University of Chemistry and Technology in ChemChemTech
- Vol. 68 (7) , 125-137
STUDY OF POLYURETHANE IONOMERS TRANSFORMATIONS IN THE BIO-SOFTENING OF MATERIALS FOR LINEN CLOTHING
Льняные материалы обладают многокомпонентным биополимерным составом, что позволяет использовать селективное воздействие разных видов ферментов в процессах их биомодификации. Подбор ферментов обеспечивает регулируемое изменение физико-механических свойств сырья, полуфабрикатов и конечной продукции, а также усиление химической активности волокна во взаимодействии с функциональными реагентами. Цель работы состоит в обосновании технологических подходов к комплексному достижению эффектов понижения избыточной жесткости льняного волокна при повышении его упругости. Исследование направлено на разработку перспективной технологии биомягчения и повышения несминаемости льняных изделий. Воздействие прочно адсорбирующихся целлюлаз с крупными (более 30 нм) размерами глобулы обеспечивает снижение жесткости ткани за счет локализованной деструкции целлюлозных фибрилл в первичной клеточной стенке льняного волокна. Биообработка дополняется нанесением на ткань водных полиуретановых дисперсий. Оценка состояния полиуретанов была проведена с использованием методов дифференциальной сканирующей калориметрии и ИК-Фурье спектроскопии. Анализ физико-механических свойств ткани проведен с использованием стандартных методов текстильного материаловедения. Исследования подтверждают отличие результатов совместного воздействия целлюлаз и полиуретановых ионо-меров на льняное волокно от эффектов, которые сопровождают традиционные процессы пленкообразования полиуретановой дисперсии на текстильных материалах. Биокатализируемый разрыв гликозидной связи в макромолекулах целлюлозы инициирует взаимодействие между образующимися концевыми звеньями пиранозы в полуацетальной форме и аминогруппами полиуретана. Комбинированная обработка льняной ткани повышает показатели несминаемости в сухом и мокром состоянии волокна в 1,4-1,6 раза в совокупности со снижением величины жесткости при изгибе в 2,2-2,7 раза. Для цитирования: Алеева С.В., Шипова С.Е., Шаммут Ю.А., Корнилова Н.Л., Кокшаров С.А. Изучение превращений полиуретановых иономеров в процессе биомягчения материалов льняной одежды. Изв. вузов. Химия и хим. технология. 2025. Т. 68. Вып. 7. С. 125-137. DOI: 10.6060/ivkkt.20256807.7205.
- 16 May 2025
- Published by Ivanovo State University of Chemistry and Technology in ChemChemTech
- Vol. 68 (7) , 125-137
Open AccessSTUDY OF POLYURETHANE IONOMERS TRANSFORMATIONS IN THE BIO-SOFTENING OF MATERIALS FOR LINEN CLOTHING
Льняные материалы обладают многокомпонентным биополимерным составом, что позволяет использовать селективное воздействие разных видов ферментов в процессах их биомодификации. Подбор ферментов обеспечивает регулируемое изменение физико-механических свойств сырья, полуфабрикатов и конечной продукции, а также усиление химической активности волокна во взаимодействии с функциональными реагентами. Цель работы состоит в обосновании технологических подходов к комплексному достижению эффектов понижения избыточной жесткости льняного волокна при повышении его упругости. Исследование направлено на разработку перспективной технологии биомягчения и повышения несминаемости льняных изделий. Воздействие прочно адсорбирующихся целлюлаз с крупными (более 30 нм) размерами глобулы обеспечивает снижение жесткости ткани за счет локализованной деструкции целлюлозных фибрилл в первичной клеточной стенке льняного волокна. Биообработка дополняется нанесением на ткань водных полиуретановых дисперсий. Оценка состояния полиуретанов была проведена с использованием методов дифференциальной сканирующей калориметрии и ИК-Фурье спектроскопии. Анализ физико-механических свойств ткани проведен с использованием стандартных методов текстильного материаловедения. Исследования подтверждают отличие результатов совместного воздействия целлюлаз и полиуретановых ионо-меров на льняное волокно от эффектов, которые сопровождают традиционные процессы пленкообразования полиуретановой дисперсии на текстильных материалах. Биокатализируемый разрыв гликозидной связи в макромолекулах целлюлозы инициирует взаимодействие между образующимися концевыми звеньями пиранозы в полуацетальной форме и аминогруппами полиуретана. Комбинированная обработка льняной ткани повышает показатели несминаемости в сухом и мокром состоянии волокна в 1,4-1,6 раза в совокупности со снижением величины жесткости при изгибе в 2,2-2,7 раза. Для цитирования: Алеева С.В., Шипова С.Е., Шаммут Ю.А., Корнилова Н.Л., Кокшаров С.А. Изучение превращений полиуретановых иономеров в процессе биомягчения материалов льняной одежды. Изв. вузов. Химия и хим. технология. 2025. Т. 68. Вып. 7. С. 125-137. DOI: 10.6060/ivkkt.20256807.7205.
- Open Access
Enterosorbents Based on Rhubarb Biomass with a Hybrid Polymer-Inorganic Coating for the Immobilization of Azaheterocyclic Mycotoxins
The aim of the study was the improvement of the phytosorbent range to solve the actual problems of preventing mycotoxicosis caused by numerous types of azaheterocyclic mycotoxins. Technological approaches to structural released pectin and to the formation of a surface layer that was capable of adhesive interaction with montmorillonite particles was identified. The increase in the material porosity and the formation of a hybrid polymer-inorganic coating on a cellulose matrix surface were revealed by scanning electron microscopy and gas adsorption. The modification of rhubarb biomass increased sorption capacity in comparison with the raw material seven-fold. The properties of rhubarb pectin and a hybrid composite based on it were investigated using FTIR spectroscopy, viscometry, laser diffraction and X-ray diffraction analysis. The results were compared with the characteristics of commercial citrus pectin. Models of the molecular structure of the polymer chain and the spatial interaction between macromolecules in the structure of the sorbing grain were proposed based on the pectin chemical state. The influence of the pectin structural organization on the kinetic parameters of the pH-regulated sorption of the test alkaloid under conditions simulating the functioning of the human digestive organs and those of farm animals was traced. The results of the studies allow prognoses on the sorption binding of alkaloids and determinations of the dosage of pectin-containing phytopreparations for mycotoxicos prevention.
Open AccessEnterosorbents Based on Rhubarb Biomass with a Hybrid Polymer-Inorganic Coating for the Immobilization of Azaheterocyclic Mycotoxins
The aim of the study was the improvement of the phytosorbent range to solve the actual problems of preventing mycotoxicosis caused by numerous types of azaheterocyclic mycotoxins. Technological approaches to structural released pectin and to the formation of a surface layer that was capable of adhesive interaction with montmorillonite particles was identified. The increase in the material porosity and the formation of a hybrid polymer-inorganic coating on a cellulose matrix surface were revealed by scanning electron microscopy and gas adsorption. The modification of rhubarb biomass increased sorption capacity in comparison with the raw material seven-fold. The properties of rhubarb pectin and a hybrid composite based on it were investigated using FTIR spectroscopy, viscometry, laser diffraction and X-ray diffraction analysis. The results were compared with the characteristics of commercial citrus pectin. Models of the molecular structure of the polymer chain and the spatial interaction between macromolecules in the structure of the sorbing grain were proposed based on the pectin chemical state. The influence of the pectin structural organization on the kinetic parameters of the pH-regulated sorption of the test alkaloid under conditions simulating the functioning of the human digestive organs and those of farm animals was traced. The results of the studies allow prognoses on the sorption binding of alkaloids and determinations of the dosage of pectin-containing phytopreparations for mycotoxicos prevention.
- 5 February 2023
- Published by Springer Nature
- p. 2091-2098
Approaches to the Task of Searching for Anomalies in Textile Texture Using Neural Networks
- 5 February 2023
- Published by Springer Nature
- p. 2091-2098
Approaches to the Task of Searching for Anomalies in Textile Texture Using Neural Networks
- 16 November 2022
- Published by Springer Nature
- p. 1159-1168
Approaches to the Task of Searching for Anomalies on the Conveyor Line Using Neural Networks
- 16 November 2022
- Published by Springer Nature
- p. 1159-1168
Approaches to the Task of Searching for Anomalies on the Conveyor Line Using Neural Networks
- 27 May 2022
- Published by SAGE Publications in Textile Research Journal
- Vol. 92 (21-22) , 4208-4229
Justification of an approach to cellulase application in enzymatic softening of linen fabrics and clothing
We propose the final softening finishing of textile products based on a complex of modifying effects on a highly ordered cellulose backbone of the secondary cell wall G-layer or on a mesh corset of microfibrillar cellulose in the primary cell wall. We suggest using polypeptide molecule sizes and the strength of polypeptide molecule adsorption binding on a model solid-phase substrate as parameters of the structurally regulated action of cellulase preparations. The article presents an analysis of 11 cellulase preparations as groups of weakly, tightly and medium adsorption enzymes, and also groups of volumetric, peripheral or combined activity manifested in the fiber structure. We show the regularities of enzyme property influence on the fiber pore structure development, changes in the parameters of the fabric bending stiffness and breaking load and technological shrinkage for two modification modes: liquid treatment with flax fiber swelling or low-modulus application solution. For the liquid method of treatment (with a bath module of at least 10) it is recommended to apply highly adsorbable cellulases ( A > 50%), in which the content of molecules with a globule size less than 30 nm does not exceed 15%. For the low-modulus method of treatment it is recommended to use enzymes with the adsorption capacity of at least 40% and a low content of small-sized fractions (no more than 25%). The recommended treatment variants ensure a three to four-fold bending stiffness decrease at the mechanical strength loss of not more than 15% and shrinkage of linen fabrics not more than 0.5%.
- 27 May 2022
- Published by SAGE Publications in Textile Research Journal
- Vol. 92 (21-22) , 4208-4229
Justification of an approach to cellulase application in enzymatic softening of linen fabrics and clothing
We propose the final softening finishing of textile products based on a complex of modifying effects on a highly ordered cellulose backbone of the secondary cell wall G-layer or on a mesh corset of microfibrillar cellulose in the primary cell wall. We suggest using polypeptide molecule sizes and the strength of polypeptide molecule adsorption binding on a model solid-phase substrate as parameters of the structurally regulated action of cellulase preparations. The article presents an analysis of 11 cellulase preparations as groups of weakly, tightly and medium adsorption enzymes, and also groups of volumetric, peripheral or combined activity manifested in the fiber structure. We show the regularities of enzyme property influence on the fiber pore structure development, changes in the parameters of the fabric bending stiffness and breaking load and technological shrinkage for two modification modes: liquid treatment with flax fiber swelling or low-modulus application solution. For the liquid method of treatment (with a bath module of at least 10) it is recommended to apply highly adsorbable cellulases ( A > 50%), in which the content of molecules with a globule size less than 30 nm does not exceed 15%. For the low-modulus method of treatment it is recommended to use enzymes with the adsorption capacity of at least 40% and a low content of small-sized fractions (no more than 25%). The recommended treatment variants ensure a three to four-fold bending stiffness decrease at the mechanical strength loss of not more than 15% and shrinkage of linen fabrics not more than 0.5%.
- 1 September 2021
- Published by Pleiades Publishing Ltd in Inorganic Materials: Applied Research
- Vol. 12 (5) , 1243-1256
Modification of an Interfacial Layer of Reinforced Polymer Composites with Nanodispersed Silicon Dioxide
The behavior of colloidal silicon dioxide in a composition with a styrene/butyl acrylate oligomer grafted onto a thermoplastic polyamide adhesive to obtain a branched binder structure with penetration of branches into a capillary-pore system of a reinforcing fiber component is studied. The modifications of disaggregation of SiO2 using ultrasonic treatment and mechanical activation with the impact of high shear stresses, ultrasound, and cavitation are compared. The methods of dynamic light scattering, IR spectroscopy, thermal analysis, and the textile material science are used in experiments to evaluate the elastic-deformation characteristics of fused packets. The set of complementary results confirms that the combined mechanical activation of an aqueous dispersion of oligoacrylate and silica causes destruction of silica nanospheres and the formation of a hybrid oligolymer-inorganic adduct. In contrast to the short-term effects of ultrasonic dispersion of SiO2, consolidated mechanical activation of components solves the problems of preventing aggregation of nanoparticles and providing a uniform distribution of the reinforcing filler in the composite. The efficiency of using the method for regulating the characteristics of the forming units and parts of sewing products has been shown. By selecting oligoacrylate, the separation of the stages of preliminary bonding of the material packets specific to sewing production using a thermoplastic adhesive, the design of a form of a finished product, and its fixing during wet-heat treatment is taken into account. The preparation of a hybrid adduct of mechanical activation provides an optimal ratio of the particle size for the efficient distribution of fractions in interfacial, interfiber, and intrafiber spaces of the textile web. The shift of the peaks of the phase transitions and chemical transformations in a system with nanodispersed SiO2 controlled on the DSC thermograms is consistent with the temperature conditions of successive stages of the engineering process. The possibilities of a controlled change in the characteristics of the forming composite materials and a decrease in the material consumption of sewing products due to grafting modified oligoacrylate with a variable content of silicon dioxide are demonstrated.
- 1 September 2021
- Published by Pleiades Publishing Ltd in Inorganic Materials: Applied Research
- Vol. 12 (5) , 1243-1256
Modification of an Interfacial Layer of Reinforced Polymer Composites with Nanodispersed Silicon Dioxide
The behavior of colloidal silicon dioxide in a composition with a styrene/butyl acrylate oligomer grafted onto a thermoplastic polyamide adhesive to obtain a branched binder structure with penetration of branches into a capillary-pore system of a reinforcing fiber component is studied. The modifications of disaggregation of SiO2 using ultrasonic treatment and mechanical activation with the impact of high shear stresses, ultrasound, and cavitation are compared. The methods of dynamic light scattering, IR spectroscopy, thermal analysis, and the textile material science are used in experiments to evaluate the elastic-deformation characteristics of fused packets. The set of complementary results confirms that the combined mechanical activation of an aqueous dispersion of oligoacrylate and silica causes destruction of silica nanospheres and the formation of a hybrid oligolymer-inorganic adduct. In contrast to the short-term effects of ultrasonic dispersion of SiO2, consolidated mechanical activation of components solves the problems of preventing aggregation of nanoparticles and providing a uniform distribution of the reinforcing filler in the composite. The efficiency of using the method for regulating the characteristics of the forming units and parts of sewing products has been shown. By selecting oligoacrylate, the separation of the stages of preliminary bonding of the material packets specific to sewing production using a thermoplastic adhesive, the design of a form of a finished product, and its fixing during wet-heat treatment is taken into account. The preparation of a hybrid adduct of mechanical activation provides an optimal ratio of the particle size for the efficient distribution of fractions in interfacial, interfiber, and intrafiber spaces of the textile web. The shift of the peaks of the phase transitions and chemical transformations in a system with nanodispersed SiO2 controlled on the DSC thermograms is consistent with the temperature conditions of successive stages of the engineering process. The possibilities of a controlled change in the characteristics of the forming composite materials and a decrease in the material consumption of sewing products due to grafting modified oligoacrylate with a variable content of silicon dioxide are demonstrated.
- Open Access
Multifunctional Polymer Coatings of Fusible Interlinings for Sewing Products
The aim of the study was to improve the range of adhesive interlining materials for clothes to add to the product a complex of improved consumer (shape stability, wear resistance) and special (protective, health-improving) properties. We have found that the modification of the adhesive coating of interlining materials with oligoacrylates provides a transition from the traditional discrete 2D glue interlayers between the bonded materials formation to the highly branched 3D structures of the interfacial layer of composites creation. Using dynamic light scattering method, IR spectroscopy, differential scanning calorimetry, gas adsorption, optical and scanning probe microscopy, methods of textile materials science, we have identified technological approaches that ensure the polymer coating penetration into the intrafiber nanopore spaces of the textile layers. We have identified ways to control the elastic-deformation properties of composites in the modifying the adhesive interlining material process in order to design its properties for the requirements of various garment models. We found a unique possibility of using graftable oligoacrylate dispersion to stabilize the nanodispersed state of functional fillers (silica, nanoferrites) and increase the uniformity of their distribution in the composite structure.
Open AccessMultifunctional Polymer Coatings of Fusible Interlinings for Sewing Products
The aim of the study was to improve the range of adhesive interlining materials for clothes to add to the product a complex of improved consumer (shape stability, wear resistance) and special (protective, health-improving) properties. We have found that the modification of the adhesive coating of interlining materials with oligoacrylates provides a transition from the traditional discrete 2D glue interlayers between the bonded materials formation to the highly branched 3D structures of the interfacial layer of composites creation. Using dynamic light scattering method, IR spectroscopy, differential scanning calorimetry, gas adsorption, optical and scanning probe microscopy, methods of textile materials science, we have identified technological approaches that ensure the polymer coating penetration into the intrafiber nanopore spaces of the textile layers. We have identified ways to control the elastic-deformation properties of composites in the modifying the adhesive interlining material process in order to design its properties for the requirements of various garment models. We found a unique possibility of using graftable oligoacrylate dispersion to stabilize the nanodispersed state of functional fillers (silica, nanoferrites) and increase the uniformity of their distribution in the composite structure.
- 1 January 2021
- Published by Saint Petersburg State University of Industrial Technologies and Design in Вестник Санкт-Петербургского государственного университета технологии и дизайна. Серия 1: Естественные и технические науки
- No. 3,p. 91-95
RESEARCH OF METHODS FOR MODELING PRODUCTION PROCESSES AT SEWING PRODUCTION
Моделирование производственных процессов является необходимым и эффективным инструментом для решения широкого круга производственных задач, позволяющим быстро принять правильное решение. Авторами статьи был проведен анализ методов моделирования, сделан обзор существующих программных решений, разработана методика моделирования и модуль для программного обеспечения Visual Components, обеспечивающий возможности динамического моделирования, визуализации и симуляционного анализа для инжиниринга производственных потоков, линий, конвейеров, автоматизированных и роботизированных...
- 1 January 2021
- Published by Saint Petersburg State University of Industrial Technologies and Design in Вестник Санкт-Петербургского государственного университета технологии и дизайна. Серия 1: Естественные и технические науки
- No. 3,p. 91-95
RESEARCH OF METHODS FOR MODELING PRODUCTION PROCESSES AT SEWING PRODUCTION
Моделирование производственных процессов является необходимым и эффективным инструментом для решения широкого круга производственных задач, позволяющим быстро принять правильное решение. Авторами статьи был проведен анализ методов моделирования, сделан обзор существующих программных решений, разработана методика моделирования и модуль для программного обеспечения Visual Components, обеспечивающий возможности динамического моделирования, визуализации и симуляционного анализа для инжиниринга производственных потоков, линий, конвейеров, автоматизированных и роботизированных...
- Open Access
- 1 July 2020
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 315, 03001
Design of composite materials for clothes
Transition to digital models of garments is the first step in dig-itization of the light industry. Adequate digital models can be obtained by using precise parameters of stress-strain properties of a fabric and other materials. The study has revealed regression dependences of the stiffness index of the polymer – fibre composite on the stiffness of the suit fabric and the combination of fusible interlining parameters. The obtained equa-tions can be used to design composite materials of the required stiffness, depending on the form of clothing being created
- 1 July 2020
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 315, 03001
Open AccessDesign of composite materials for clothes
Transition to digital models of garments is the first step in dig-itization of the light industry. Adequate digital models can be obtained by using precise parameters of stress-strain properties of a fabric and other materials. The study has revealed regression dependences of the stiffness index of the polymer – fibre composite on the stiffness of the suit fabric and the combination of fusible interlining parameters. The obtained equa-tions can be used to design composite materials of the required stiffness, depending on the form of clothing being created
- 2 June 2020
- Published by Pleiades Publishing Ltd in Russian Journal of Physical Chemistry A
- Vol. 94 (6) , 1268-1271
Interactions in Mechanoactivated Hydrosols of Colloidal Silica and Oligoacrylates
Infrared spectra are obtained for the disperse phase of initial and mechanoactivated hydrosols of colloidal silica and binary systems with an oligoacrylate dispersion (10 wt %). Changes in the absorption bands characterizing the state of the functional groups of the considered substances are analyzed. A conclusion is drawn about interactions that occur according to the mechanism of physical adsorption with silica subjected to ultrasonic dispersion. It is found that the rotor pulse treatment of a hydrosol of silica results in the breaking of siloxane bonds, accompanied by a rise in the concentration of the silanol groups. Mechanoactivation of the binary system ensures processes of chemisorption with the formation of new types of Si–O–C and Si–C bonds.
- 2 June 2020
- Published by Pleiades Publishing Ltd in Russian Journal of Physical Chemistry A
- Vol. 94 (6) , 1268-1271
Interactions in Mechanoactivated Hydrosols of Colloidal Silica and Oligoacrylates
Infrared spectra are obtained for the disperse phase of initial and mechanoactivated hydrosols of colloidal silica and binary systems with an oligoacrylate dispersion (10 wt %). Changes in the absorption bands characterizing the state of the functional groups of the considered substances are analyzed. A conclusion is drawn about interactions that occur according to the mechanism of physical adsorption with silica subjected to ultrasonic dispersion. It is found that the rotor pulse treatment of a hydrosol of silica results in the breaking of siloxane bonds, accompanied by a rise in the concentration of the silanol groups. Mechanoactivation of the binary system ensures processes of chemisorption with the formation of new types of Si–O–C and Si–C bonds.