CHChangyi Hu

Changyi Hu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Changyi Hu has a total of 40 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Research Progress on the Application of One-Step Fabrication Techniques for Iridium-Based Thin Films in the Oxygen Evolution Reaction

    by Wenting Li, Junyu Zhu, Hongzhong Cai, Zhongqiu Tong, Xian Wang, Yan Wei, Xingqiang Wang, Changyi Hu, Xingdong Zhao, Xuxiang Zhang

    Electrochemical water splitting, a sustainable method for hydrogen production, faces the challenge of slow oxygen evolution reaction (OER) kinetics. Iridium oxide (IrO2) is widely regarded as the most effective catalyst for OER due to its excellent properties. Compared to nanoparticles, IrO2 thin films exhibit significant advantages in OER, including a uniform and stable catalytic interface and excellent mechanical strength. This paper reviews recent advancements in one-step deposition techniques for the preparation of IrO2 thin films and their application in OER. Additionally, it analyzes the advantages and disadvantages of various methods and the latest research achievements, and briefly outlines the future trends and applications.


  • Open Access

    Oxidation Resistance of Ir/HfO2 Composite Coating Prepared by Chemical Vapor Deposition: Microstructure and Elemental Migration

    by Junyu Zhu, Wenting Li, Hongzhong Cai, Xian Wang, Xingqiang Wang, Yan Wei, Changyi Hu, Xingdong Zhao, Xuxiang Zhang

    In this study, a HfO2 coating was developed on an Ir matrix using a customized open-tube airflow, cold-wall chemical vapor deposition instrument. The preparation process and structure of the as-prepared coating were investigated to gain insights into its characteristics. The HfO2 coating effectively prevents direct contact between Ir and O, leading to a reduction in the oxidation rate of Ir. Furthermore, defects such as micropores and cracks generated during sealed oxidation erosion contribute to Ir’s decelerated oxidation failure. The as-prepared HfO2 coating exhibits low thermal conductivity and a high heat radiation rate, reducing the coating’s surface temperature. These characteristics significantly enhance adversity tolerance and increase the working temperature of the coating. Moreover, the as-prepared HfO2 coating can serve as a diffusion barrier, blocking both the direct contact of O with the Ir coating and the diffusion of other elements to the Ir coating. As a result, the rates of diffusion of other elements to the Ir coating are reduced.


  • Pressure Dependence of Mechanical and Thermodynamic Properties of MAX‐Phase M2GaC (M = Nb and Ta) from First‐Principles Calculations

    by Kailiang Luo, Yang Xu, Zhengyi Li, Changyi Hu, Yan Wei

    Herein, the high‐pressure impacts on the electronic, mechanical, and thermodynamic properties of MAX‐phase M2GaC (M = Nb and Ta) are calculated through the first principles. The phonon dispersion results indicate that M2GaC (M = Nb and Ta) is dynamically stable. The elastic constants and elastic modulus of Nb2GaC and Ta2GaC increase with the pressure increase, while the elastic anisotropic 3D surface structure and projection diagram show that bulk modulus, shear modulus, and Young's modulus all show anisotropy. M2GaC (M = Nb and Ta) has metallic, covalent, and ionic bonds. In addition, based on the quasiharmonic Debye model, the effects of high pressure (0–50 GPa) and temperature (0–2000 K) on the thermodynamic properties of Nb2GaC and Ta2GaC are systematically studied. The constant pressure heat capacity (CP) and thermal expansion coefficient (α) of Nb2GaC and Ta2GaC decrease with the increase of pressure, while the internal energy (U) and Gibbs free energy (G) of Nb2GaC and Ta2GaC increase with the increase of pressure. The sound velocity and kmin increase with the pressure increase, and Nb2GaC has a higher thermal conductivity than Ta2GaC.


  • Open Access

    Exploring the Impact of Zirconium Doping on the Mechanical and Thermodynamic Characteristics of Pt-40Rh Alloy through First-Principles Calculations

    by Fangzhou Li, Zhentao Yuan, Xiao Wang, Hua Dai, Changyi Hu, Yan Wei, Hongzhong Cai, Xian Wang, Qinqin Gao, Jialin Chen, et al.

    Zirconium (Zr) element doping has proven to be an effective strategy for reinforcing the strength and toughness of Pt-Rh alloys. However, the incorporation of Zr into Pt-Rh alloy in solid solution form renders its microstructural observation challenging through experimental means, thus complicating the elucidation of its underlying mechanisms. Therefore, this study employs density functional theory-based first-principles calculations to investigate the mechanical and thermodynamic properties of Pt-40Rh-xZr (x = 0, 0.1, 0.5, 1.0) alloys. The results reveal that with an increasing Zr weight percentage, Young’s modulus, and hardness of Pt-40Rh-xZr alloys exhibit a trend of an initial decrease followed by a subsequent increase. Notably, at a Zr weight percentage of 1.0 wt.%, the alloy Pt-40Rh-1.0Zr demonstrates the highest Young’s modulus (329.119 GPa) and hardness (10.590 GPa). Concurrently, thermodynamic calculations indicate that as Zr content increases, the crystal thermal stability of Pt-40Rh-xZr alloys initially decreases before rising again. More specifically, the coefficient of thermal expansion for Pt-40Rh-1.0Zr is merely 89.518% of that observed in Pt-40Rh. These results imply that incorporating 1.0 wt.% Zr results in the most substantial enhancement in the comprehensive mechanical properties of the Pt-40Rh-xZr alloy. Consequently, this study offers theoretical insights that can guide the extended application of Pt-Rh alloys.


  • Open Access

    Effect of Deposition Temperature on the Surface, Structural, and Mechanical Properties of HfO2 Using Chemical Vapor Deposition (CVD)

    by Mengran Bi, Junyu Zhu, Yuan Luo, Hongzhong Cai, Xuming Li, Xian Wang, Yan Wei, Xiao Wang, Changyi Hu, Jinquan Hu, et al.

    A high-temperature-resistant and high-performance hafnium oxide (HfO2) coating for aerospace engines was developed. HfO2 thin film coatings were prepared by chemical vapor deposition (CVD) at 1200, 1250, 1300, and 1350 °C, respectively. The crystal structure and surface morphology of the HfO2 thin films at different deposition temperatures were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), and atomic force microscopy (AFM). The effect of deposition temperature on the mechanical properties of the HfO2 thin films was studied by means of the drainage method and nanoindentation. The results showed that the HfO2 coatings deposited at different deposition temperatures are monoclinic crystal structures, and the surface morphology changes from cellular particles to columnar particles, and finally, to a loose and porous layered structure. When the deposition temperature is 1300 °C, the density of the HfO2 film is the highest, 9.62 ± 0.03 g/cm3, and the hardness is the highest, 7.33 ± 0.04 GPa. A HfO2 coating with the best comprehensive mechanical properties was prepared by changing the deposition temperature, which provided an experimental basis for the application of a HfO2 coating in the aerospace field.


  • Hierarchical microstructure in high Nb-containing TiAl alloy

    by Neng He, Maohua Quan, Junpin Lin, Lianlong He, Changyi Hu


  • Finite element simulation and experiment study of residual stress distribution of CVD Nb-C/SiC composites

    by Zhilong Tan, Ming Wen, Li Chen, Hongzhong Cai, Jialin Chen, Yan Wei, Junmei Guo, Changyi Hu

    Residual stresses induced in the cooling process of deposited Nb connection layer on C/SiC composite have significant impact on their mechanical properties. This work aims to characterize the residual stresses and investigate the change rule of the residual stress by the X-ray scattering technique and finite element method (FEM). Nb connection layer was deposited on C/SiC composites by chemical vapor deposition method (CVD). The result shows that temperature of CVD Nb-C/SiC composites is linear over time, the temperature gradient between connection layer and matrix is almost zero. During cooling process, interface residual stress is mainly caused by the large difference of thermal expansion coefficient of both materials. Due to the size effect of the geometrical model, the interface stress gradient is small along the radial direction but large along the axial direction. C/SiC substrate is subjected to compressive stress while Nb layer bears tensile stress. Along the ring direction, equivalent stress from C/SiC substrate to Nb layer presents linearly downward trend. The calculated value is nearly the same with the XRD testing result on the side of Nb layer, which further confirms the correctness of the finite element model.