Chencheng Dong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Chencheng Dong has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
- Xuechao Chen
Beijing Institute of Technology
16 shared publications - Zhangguo Yu
Beijing Institute of Technology
16 shared publications - Qiang Huang
Thrust of Robotics and Autonomous Systems, The Hong Kong University of Science and Technology (Guangzhou), Guangzhou, China
14 shared publications - Huanzhong Chen
School of Mechantronical Engineering, Beijing Institute of Technology, Beijing, China
7 shared publications - Fei Meng
Beijing Institute of Technology
6 shared publications - Qingqing Li
Beijing Institute of Technology
6 shared publications
Latest Publications
- 5 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 23 (15455955) , 10812-10827
Integrating Identification and Regulation: A Foreign-Load Adaptive Balance Control Framework for Biped Robots via a Hierarchical Hip-Ankle Strategy
Bipedal robots are increasingly deployed in tasks where stability under load is critical. However, control methods relying solely on state feedback struggle to maintain stability under unknown foreign loads, as dynamics induced by the load directly affect balance critical states in intrinsically unstable bipedal systems. This paper proposes a foreign-load adaptive balance control framework for bipedal locomotion based on online load parameter estimation and composite model update. Load dynamic parameters are estimated online using an optimal method and embedded into the controller’s internal “robot with load” composite model to continuously update balance-relevant dynamics. Based on this representation, a hierarchical hip-ankle coordination strategy is adopted, where the hip provides proactive load compensation and the ankle regulates reactive posture stabilization and ground compliance. Simulation and hardware experiments demonstrate stable dynamic bipedal locomotion under heavy foreign loads with unknown dynamic parameters, validating improved balance robustness, load adaptability, and posture regulation for real-world applications.
- 5 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 23 (15455955) , 10812-10827
Integrating Identification and Regulation: A Foreign-Load Adaptive Balance Control Framework for Biped Robots via a Hierarchical Hip-Ankle Strategy
Bipedal robots are increasingly deployed in tasks where stability under load is critical. However, control methods relying solely on state feedback struggle to maintain stability under unknown foreign loads, as dynamics induced by the load directly affect balance critical states in intrinsically unstable bipedal systems. This paper proposes a foreign-load adaptive balance control framework for bipedal locomotion based on online load parameter estimation and composite model update. Load dynamic parameters are estimated online using an optimal method and embedded into the controller’s internal “robot with load” composite model to continuously update balance-relevant dynamics. Based on this representation, a hierarchical hip-ankle coordination strategy is adopted, where the hip provides proactive load compensation and the ankle regulates reactive posture stabilization and ground compliance. Simulation and hardware experiments demonstrate stable dynamic bipedal locomotion under heavy foreign loads with unknown dynamic parameters, validating improved balance robustness, load adaptability, and posture regulation for real-world applications.
- 28 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. PP (15455955) , 1
Versatile Bipedal Locomotion and Walking-Running Transition: Coordinating Supervised Learning and Nonlinear Optimization
Online gait planning plays a crucial role for the locomotion of humanoid robots. While simplified models often fail to capture critical dynamic features of the robot’s motion, making online gait modifications with constrained nonlinear optimization in complex models is highly challenging with current computational power. This paper introduces a gait planning method that leverages supervised learning to expedite the gait planning and optimization process. Building upon our previous work, this paper extends a three-body model to the three-dimensional (3D) case. This model incorporates the angular momentum and height variation of body as well as the influence of leg motions, thus facilitating the generation of omnidirectional walking and running patterns. Due to the complexity of the model, an online gait planning modification is impractical. Therefore, supervised-learning is employed to train a policy derived from the model-based gait planning approach. This policy is then implemented online to produce versatile locomotion. Furthermore, the gradient of the trained neural network is utilized for nonlinear optimization of gait parameters, significantly improving the robot’s balance against external perturbations. The effectiveness of the proposed method is validated through a series of experiments conducted in simulation and on the real robot BHR-T, confirming its capability to generate adaptive walking and running motions in response to varying demands and disturbances.
- 28 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. PP (15455955) , 1
Versatile Bipedal Locomotion and Walking-Running Transition: Coordinating Supervised Learning and Nonlinear Optimization
Online gait planning plays a crucial role for the locomotion of humanoid robots. While simplified models often fail to capture critical dynamic features of the robot’s motion, making online gait modifications with constrained nonlinear optimization in complex models is highly challenging with current computational power. This paper introduces a gait planning method that leverages supervised learning to expedite the gait planning and optimization process. Building upon our previous work, this paper extends a three-body model to the three-dimensional (3D) case. This model incorporates the angular momentum and height variation of body as well as the influence of leg motions, thus facilitating the generation of omnidirectional walking and running patterns. Due to the complexity of the model, an online gait planning modification is impractical. Therefore, supervised-learning is employed to train a policy derived from the model-based gait planning approach. This policy is then implemented online to produce versatile locomotion. Furthermore, the gradient of the trained neural network is utilized for nonlinear optimization of gait parameters, significantly improving the robot’s balance against external perturbations. The effectiveness of the proposed method is validated through a series of experiments conducted in simulation and on the real robot BHR-T, confirming its capability to generate adaptive walking and running motions in response to varying demands and disturbances.
- 18 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 22 (15455955) , 13470-13484
Concept and Strategies: Equivalent Predictive Control and Handle Point Control for Bipedal-Vehicle Transformable Robots Under Various Disturbances
Bipedal-vehicle transformable robots (BVTRs), equipped with driving wheels, combine the flexibility of bipedal locomotion with the speed of wheeled movement. However, maintaining balance across different formations under various external disturbances remains a significant challenge due to uncertain disturbance types and dynamic shifts between formations. To address these challenges, this paper introduces the concept of Equivalent Predictive Control (EPC), which models all disturbances as unified virtual wrenches and integrates them directly into the robot’s predictive control model, treated as an inertia-varying single rigid body. By anticipating the future impact of disturbances, EPC enhances stability and enables simultaneous handling of various disturbances. To address the challenge of dynamic changes, contact variations, and shifting constraints during formation transitions, we propose Handle Point Control (HPC). HPC simplifies multi-task tracking by reducing joint space control to a set of virtual target points, called ‘handle points’, such as knees, hips, and shoulders. This method facilitates real-time formation switching by tracking different handle points. Experiments on the BVTR platform BHR8-2 validate the effectiveness of the proposed control strategies.
- 18 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 22 (15455955) , 13470-13484
Concept and Strategies: Equivalent Predictive Control and Handle Point Control for Bipedal-Vehicle Transformable Robots Under Various Disturbances
Bipedal-vehicle transformable robots (BVTRs), equipped with driving wheels, combine the flexibility of bipedal locomotion with the speed of wheeled movement. However, maintaining balance across different formations under various external disturbances remains a significant challenge due to uncertain disturbance types and dynamic shifts between formations. To address these challenges, this paper introduces the concept of Equivalent Predictive Control (EPC), which models all disturbances as unified virtual wrenches and integrates them directly into the robot’s predictive control model, treated as an inertia-varying single rigid body. By anticipating the future impact of disturbances, EPC enhances stability and enables simultaneous handling of various disturbances. To address the challenge of dynamic changes, contact variations, and shifting constraints during formation transitions, we propose Handle Point Control (HPC). HPC simplifies multi-task tracking by reducing joint space control to a set of virtual target points, called ‘handle points’, such as knees, hips, and shoulders. This method facilitates real-time formation switching by tracking different handle points. Experiments on the BVTR platform BHR8-2 validate the effectiveness of the proposed control strategies.
- 18 March 2025
- Published by World Scientific Pub Co Pte Ltd in Unmanned Systems
- Vol. 14 (02) , 369-378
Plane-Aware Heightmap for Adaptable Footstep Planning in Discontinuous Coplanar Terrain
Planar information is crucial for determining the support plane of a candidate footstep, enabling reliable traversability checks during footstep planning. Due to the imprudent determination of the support plane caused by insufficient planar information, current heightmap-based algorithms struggle to plan footsteps in discontinuous coplanar terrain. In this paper, we propose a plane-aware heightmap that integrates the results of planar region detection, allowing each cell to direct retrieval of its corresponding plane parameters. Building on this, the support plane of a candidate footstep is determined by evaluating the consistency between the support planes of the four corner subregions of the foot. Specifically, the support plane considered for each corner subregion is the one with the highest elevation within that region, provided it is sufficiently large to support the corresponding area. We evaluate the enhancement of footstep planning achieved by the proposed heightmap and support-plane determination methods, which enable planning across diverse discontinuous coplanar terrain in both simulated and real-world settings.
- 18 March 2025
- Published by World Scientific Pub Co Pte Ltd in Unmanned Systems
- Vol. 14 (02) , 369-378
Plane-Aware Heightmap for Adaptable Footstep Planning in Discontinuous Coplanar Terrain
Planar information is crucial for determining the support plane of a candidate footstep, enabling reliable traversability checks during footstep planning. Due to the imprudent determination of the support plane caused by insufficient planar information, current heightmap-based algorithms struggle to plan footsteps in discontinuous coplanar terrain. In this paper, we propose a plane-aware heightmap that integrates the results of planar region detection, allowing each cell to direct retrieval of its corresponding plane parameters. Building on this, the support plane of a candidate footstep is determined by evaluating the consistency between the support planes of the four corner subregions of the foot. Specifically, the support plane considered for each corner subregion is the one with the highest elevation within that region, provided it is sufficiently large to support the corresponding area. We evaluate the enhancement of footstep planning achieved by the proposed heightmap and support-plane determination methods, which enable planning across diverse discontinuous coplanar terrain in both simulated and real-world settings.
- 1 February 2025
- Published by Elsevier in ISA Transactions
- Vol. 158, 184-196
Towards high mobility and adaptive mode transitions: Transformable wheel-biped humanoid locomotion strategy
- 1 February 2025
- Published by Elsevier in ISA Transactions
- Vol. 158, 184-196
Towards high mobility and adaptive mode transitions: Transformable wheel-biped humanoid locomotion strategy
- Open Access
A 3-Step Optimization Framework with Hybrid Models for a Humanoid Robot's Jump Motion
High dynamic jump motions are challenging tasks for humanoid robots to achieve environment adaptation and obstacle crossing. The trajectory optimization is a practical method to achieve high-dynamic and explosive jumping. This paper proposes a 3-step trajectory optimization framework for generating a jump motion for a humanoid robot. To improve iteration speed and achieve ideal performance, the framework comprises three sub-optimizations. The first optimization incorporates momentum, inertia, and center of pressure (CoP), treating the robot as a static reaction momentum pendulum (SRMP) model to generate corresponding trajectories. The second optimization maps these trajectories to joint space using effective Quadratic Programming (QP) solvers. Finally, the third optimization generates whole-body joint trajectories utilizing trajectories generated by previous parts. With the combined consideration of momentum and inertia, the robot achieves agile forward jump motions. A simulation and experiments (Fig. \ref{Fig First page fig}) of forward jump with a distance of 1.0 m and 0.5 m height are presented in this paper, validating the applicability of the proposed framework.
Open AccessA 3-Step Optimization Framework with Hybrid Models for a Humanoid Robot's Jump Motion
High dynamic jump motions are challenging tasks for humanoid robots to achieve environment adaptation and obstacle crossing. The trajectory optimization is a practical method to achieve high-dynamic and explosive jumping. This paper proposes a 3-step trajectory optimization framework for generating a jump motion for a humanoid robot. To improve iteration speed and achieve ideal performance, the framework comprises three sub-optimizations. The first optimization incorporates momentum, inertia, and center of pressure (CoP), treating the robot as a static reaction momentum pendulum (SRMP) model to generate corresponding trajectories. The second optimization maps these trajectories to joint space using effective Quadratic Programming (QP) solvers. Finally, the third optimization generates whole-body joint trajectories utilizing trajectories generated by previous parts. With the combined consideration of momentum and inertia, the robot achieves agile forward jump motions. A simulation and experiments (Fig. \ref{Fig First page fig}) of forward jump with a distance of 1.0 m and 0.5 m height are presented in this paper, validating the applicability of the proposed framework.
- 1 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 22, 14120-14132
A Three-Step Optimization Framework With Hybrid Models for a Humanoid Robot’s Jump Motion
- 1 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 22, 14120-14132
A Three-Step Optimization Framework With Hybrid Models for a Humanoid Robot’s Jump Motion
- 27 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 29 (3) , 1702-1713
Swift Running Robot Leg: Mechanism Design and Motion-Guided Optimization
Toward swift running on biped robots, this article provides a complete design approach for a robot leg featuring reduced rotational inertia and introduces a novel mechanic optimization scheme to meet severe mechanical requirements. We adopt a ballscrew driving setup to design the inertia-reduced driving for the leg. When designing the actuator's transmission to satisfy the joints' speed and torque demands, it is challenging to specify the mechanism parameters because their effects are nonlinear and highly coupled. To address this problem, we invite a novel idea that uses target motion trajectories to guide the optimization process and make the mechanism fit the motion best. For that purpose, the joint space position is divided into a high-speed and high-torque region by analyzing the target joint trajectories. Then, the optimization scheme is formulated according to this division to obtain the optimized joint position–transmission ratio curve. The proposed technique can dramatically reduce the torque demands, making a good tradeoff in reconciling the dilemma between the joint speed and torque demands. Finally, the proposed scheme is validated with a 7 km/h running motion on the biped robot BHR-T, enhancing the robot with the desired athletic capacities.
- 27 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 29 (3) , 1702-1713
Swift Running Robot Leg: Mechanism Design and Motion-Guided Optimization
Toward swift running on biped robots, this article provides a complete design approach for a robot leg featuring reduced rotational inertia and introduces a novel mechanic optimization scheme to meet severe mechanical requirements. We adopt a ballscrew driving setup to design the inertia-reduced driving for the leg. When designing the actuator's transmission to satisfy the joints' speed and torque demands, it is challenging to specify the mechanism parameters because their effects are nonlinear and highly coupled. To address this problem, we invite a novel idea that uses target motion trajectories to guide the optimization process and make the mechanism fit the motion best. For that purpose, the joint space position is divided into a high-speed and high-torque region by analyzing the target joint trajectories. Then, the optimization scheme is formulated according to this division to obtain the optimized joint position–transmission ratio curve. The proposed technique can dramatically reduce the torque demands, making a good tradeoff in reconciling the dilemma between the joint speed and torque demands. Finally, the proposed scheme is validated with a 7 km/h running motion on the biped robot BHR-T, enhancing the robot with the desired athletic capacities.