Pradnya Nikhade
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Pradnya Nikhade has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Manoj Chandak
Datta Meghe Inst Higher Educ & Res, Sharad Pawar Dent Coll & Hosp, Conservat Dent & Endodont, Wardha, India
12 shared publications - Anuja Ikhar
Department of Conservative Dentistry and Endodontics, Sharad Pawar Dental College and Hospital, Datta Meghe Institute of Medical Sciences, Wardha, IND
8 shared publications - Aditya Patel
Department of Conservative Dentistry and Endodontics, Sharad Pawar Dental College and Hospital, Datta Meghe Institute of Medical Sciences, Wardha, IND
6 shared publications - Paridhi Agrawal
Department of Conservative Dentistry and Endodontics, Sharad Pawar Dental College and Hospital, Datta Meghe Institute of Higher Education and Research, Wardha, India
5 shared publications - Joyeeta Mahapatra
Department of Conservative Dentistry and Endodontics, Sharad Pawar Dental College and Hospital, Datta Meghe Institute of Higher Education and Research, Wardha, IND
4 shared publications - Meghna Dugar
Conservative Dentistry and Endodontics, Sharad Pawar Dental College And Hospital, Datta Meghe Institute of Medical Sciences, Wardha, IND
4 shared publications
Latest Publications
- Open Access
- 1 May 2024
- Published by Saint Joseph University of Beirut in International Arab Journal of Dentistry
- Vol. 15 (1) , 48-56
Comparative clinical evaluation of efficacy of Biodentine and Bromelain with Biodentine as direct pulp capping materials
Objectives: This study aimed to evaluate the efficacy of Biodentine and a combination of bromelain with Biodentine as direct pulp capping materials. Methods: This clinical study included 26 participants with mature permanent mandibular molars exhibiting deep carious lesions without pulpal exposure. The participants were divided into two groups: Group I received Biodentine alone, while Group II received a combination of bromelain and Biodentine. Clinical and radiographic follow-ups were performed at 1, 3, and 6 months to assess the success rates of the treatment modalities. Results: The clinical success rate of Biodentine as a direct pulp capping agent was 92% at 1 month, 100% at 3 months, and 92% at 6 months follow-up. The radiographic success rate was 100% at all intervals. The clinical success rate of the bromelain with Biodentine group was 85% at 1 month, 91% at 3 months, and 100% at 6 months, with corresponding radiographic success rates of 92%, 91%, and 100% at the respective intervals. Statistical analysis revealed no significant difference in success rates between the two groups. Conclusions: Both Biodentine and the combination of bromelain with Biodentine demonstrated high clinical and radiographic success rates in direct pulp capping. However, there was no statistically significant difference between the two groups, suggesting that bromelain may not provide additional benefits when combined with Biodentine. Further research with larger sample sizes and longer follow-up periods is needed to explore the potential of bromelain and other combinations for direct pulp capping. These findings contribute to our understanding of effective materials for vital pulp therapy and guide clinical decision-making in dental practice.
- 1 May 2024
- Published by Saint Joseph University of Beirut in International Arab Journal of Dentistry
- Vol. 15 (1) , 48-56
Open AccessComparative clinical evaluation of efficacy of Biodentine and Bromelain with Biodentine as direct pulp capping materials
Objectives: This study aimed to evaluate the efficacy of Biodentine and a combination of bromelain with Biodentine as direct pulp capping materials. Methods: This clinical study included 26 participants with mature permanent mandibular molars exhibiting deep carious lesions without pulpal exposure. The participants were divided into two groups: Group I received Biodentine alone, while Group II received a combination of bromelain and Biodentine. Clinical and radiographic follow-ups were performed at 1, 3, and 6 months to assess the success rates of the treatment modalities. Results: The clinical success rate of Biodentine as a direct pulp capping agent was 92% at 1 month, 100% at 3 months, and 92% at 6 months follow-up. The radiographic success rate was 100% at all intervals. The clinical success rate of the bromelain with Biodentine group was 85% at 1 month, 91% at 3 months, and 100% at 6 months, with corresponding radiographic success rates of 92%, 91%, and 100% at the respective intervals. Statistical analysis revealed no significant difference in success rates between the two groups. Conclusions: Both Biodentine and the combination of bromelain with Biodentine demonstrated high clinical and radiographic success rates in direct pulp capping. However, there was no statistically significant difference between the two groups, suggesting that bromelain may not provide additional benefits when combined with Biodentine. Further research with larger sample sizes and longer follow-up periods is needed to explore the potential of bromelain and other combinations for direct pulp capping. These findings contribute to our understanding of effective materials for vital pulp therapy and guide clinical decision-making in dental practice.
- Open Access
- 20 October 2022
- Published by Springer Nature in Cureus
- Vol. 14 (10) , e30528
A Case Report on the Rehabilitation of Severely Worn Teeth Using a Custom-Made Cast Post
Posts have been suggested to strengthen weak endodontically treated teeth against intra-oral forces by transmitting torquing forces within the radicular dentin to supportive tissue along their roots. The case studies that follow show how an interdisciplinary approach was used to use complete veneer crowns after custom cast posts to repair severely damaged treated teeth and restore their appearance and functionality. Coordinated prosthetic and endodontic treatments with careful consideration of the patient's expectations and requirements were crucial for a positive result and patient satisfaction. For a very long period, a cast metal post and core were used to provide the foundation restoration for a prosthetic crown. The cast post and core system has the benefit that the core is a natural extension of the post. It is intended for the post to keep the core restoration, which rebuilds the destroyed coronal structure. In this article, cast post and core and porcelain fused to metal restorations for injured maxillary central incisors are discussed.
- 20 October 2022
- Published by Springer Nature in Cureus
- Vol. 14 (10) , e30528
Open AccessA Case Report on the Rehabilitation of Severely Worn Teeth Using a Custom-Made Cast Post
Posts have been suggested to strengthen weak endodontically treated teeth against intra-oral forces by transmitting torquing forces within the radicular dentin to supportive tissue along their roots. The case studies that follow show how an interdisciplinary approach was used to use complete veneer crowns after custom cast posts to repair severely damaged treated teeth and restore their appearance and functionality. Coordinated prosthetic and endodontic treatments with careful consideration of the patient's expectations and requirements were crucial for a positive result and patient satisfaction. For a very long period, a cast metal post and core were used to provide the foundation restoration for a prosthetic crown. The cast post and core system has the benefit that the core is a natural extension of the post. It is intended for the post to keep the core restoration, which rebuilds the destroyed coronal structure. In this article, cast post and core and porcelain fused to metal restorations for injured maxillary central incisors are discussed.
- Open Access
- 10 October 2022
- Published by Springer Nature in Cureus
- Vol. 14 (10) , e30109
Comparative Evaluation of Microleakage in Class II Restorations Using Open- and Closed-Sandwich Techniques With Zirconomer as an Intermediate Material: An In-Vitro Study
To evaluate and compare the microleakage In class II restorations using open- and closed-sandwich techniques with zirconomer as an intermediate material. Twenty-six non-carious mandibular first molars were selected and randomly divided into two groups (groups 1 and 2 where n=13). A standardized Class II preparation was made with the cervical margin 1 mm below the cementum-enamel junction. Samples of group 1 were restored using the open-sandwich technique and samples of group 2 with the close-sandwich technique, and zirconomer was used as an intermediate restorative material. Following that, the restorations underwent 200 heat cycles with dwell times of 20 seconds at 5°C and 55°C. Dye penetration and scanning electron microscope (SEM) analysis using the replica approach were used to assess adaptation at the cervical margin. The data were statistically analyzed using the Paired T-test (pp<0.001). When comparing the open-sandwich technique with the closed one, it was observed that less microleakage was seen in the open-sandwich technique as it has better marginal adaptation and fewer voids.
- 10 October 2022
- Published by Springer Nature in Cureus
- Vol. 14 (10) , e30109
Open AccessComparative Evaluation of Microleakage in Class II Restorations Using Open- and Closed-Sandwich Techniques With Zirconomer as an Intermediate Material: An In-Vitro Study
To evaluate and compare the microleakage In class II restorations using open- and closed-sandwich techniques with zirconomer as an intermediate material. Twenty-six non-carious mandibular first molars were selected and randomly divided into two groups (groups 1 and 2 where n=13). A standardized Class II preparation was made with the cervical margin 1 mm below the cementum-enamel junction. Samples of group 1 were restored using the open-sandwich technique and samples of group 2 with the close-sandwich technique, and zirconomer was used as an intermediate restorative material. Following that, the restorations underwent 200 heat cycles with dwell times of 20 seconds at 5°C and 55°C. Dye penetration and scanning electron microscope (SEM) analysis using the replica approach were used to assess adaptation at the cervical margin. The data were statistically analyzed using the Paired T-test (pp<0.001). When comparing the open-sandwich technique with the closed one, it was observed that less microleakage was seen in the open-sandwich technique as it has better marginal adaptation and fewer voids.
- Open Access
- 28 September 2022
- Published by Springer Nature in Cureus
- Vol. 14 (9)
Management of Ellis Class-IV Fractured Tooth With an Open Apex: A Case Report
Dental professionals face difficulty in managing "immature non-vital teeth with an open apex." It is considered to be challenging because, in this situation, root canal filling material should be confined within the boundaries of the root canal without extruding peri-apically. Apexification tries to create a hard tissue barrier that will cause the open apex to close, allowing root filling to be compacted. The current case report describes the application of mineral trioxide aggregate (MTA) to create an apical plug in an open apex, as MTA is considered a versatile material for apexification, which was followed by the reinforcing of the weekend root using glass fiber post and core build-up to manage the Ellis class IV fracture.
- 28 September 2022
- Published by Springer Nature in Cureus
- Vol. 14 (9)
Open AccessManagement of Ellis Class-IV Fractured Tooth With an Open Apex: A Case Report
Dental professionals face difficulty in managing "immature non-vital teeth with an open apex." It is considered to be challenging because, in this situation, root canal filling material should be confined within the boundaries of the root canal without extruding peri-apically. Apexification tries to create a hard tissue barrier that will cause the open apex to close, allowing root filling to be compacted. The current case report describes the application of mineral trioxide aggregate (MTA) to create an apical plug in an open apex, as MTA is considered a versatile material for apexification, which was followed by the reinforcing of the weekend root using glass fiber post and core build-up to manage the Ellis class IV fracture.
- Open Access
- 21 September 2022
- Published by Springer Nature in Cureus
- Vol. 14 (9)
Hemisection: A Different Approach From Extraction
Hemisection is the sectioning of teeth with multiple roots, the removal of the damaged root and its associated crown piece, and the preservation of the healthy root (with crown). When periodontal, resorption, perforation, or caries damage is limited to one root and the other root is still largely healthy, this treatment option may be taken into account. The right case selection is the most important component in determining the long-term success in such cases. This case report details the hemisection of a mandibular molar with root caries, followed by appropriate restoration.
- 21 September 2022
- Published by Springer Nature in Cureus
- Vol. 14 (9)
Open AccessHemisection: A Different Approach From Extraction
Hemisection is the sectioning of teeth with multiple roots, the removal of the damaged root and its associated crown piece, and the preservation of the healthy root (with crown). When periodontal, resorption, perforation, or caries damage is limited to one root and the other root is still largely healthy, this treatment option may be taken into account. The right case selection is the most important component in determining the long-term success in such cases. This case report details the hemisection of a mandibular molar with root caries, followed by appropriate restoration.
- Open Access
- 7 September 2022
- Published by Springer Nature in Cureus
- Vol. 14 (9)
Comparative Evaluation of the Efficacy of Light-Cured Calcium Hydroxide and a Fourth-Generation Calcium Silicate Cement (TheraCal LC) as Indirect Pulp Capping Materials in Patients With Deep Carious Lesions: A Randomized Parallel-Group Clinical Trial
The current study aims to evaluate and compare the efficacy of light-cured calcium hydroxide and a fourth-generation calcium silicate cement (TheraCal LC®) as indirect pulp capping (IPC) materials in patients with deep carious lesions. A total of 28 patients were randomly divided into two groups (n=14). Group A was managed by light-cured calcium hydroxide, while group B was treated with TheraCal LC (a fourth-generation calcium silicate cement). Clinical examination was conducted to check for postoperative pain, tenderness, and neural sensibility, and radiographical examination was conducted to check for periodontal ligament space widening, presence of calcific barrier, and periapical radiolucency at patient recall of 21 days, three months, and six months. Primary and secondary outcome variables were based on clinical and radiographical success rates noted at six months’ follow-up. Success rate for light-cured calcium hydroxide group at follow-up came out to be 0% at 21 days, 85.71% at three months, and 92.85% at six months. The success rate for TheraCal LC group came out to be 0% at 21 days, 92.85% at three months, and 100% at six months. The overall success rate for IPC procedure was 89.28% at three months’ follow-up and 96.42% at six months’ follow-up for both groups. The difference was statistically non-significant at the end of three and six months’ follow-up. Within the limitations of our study, it was concluded that TheraCal LC can be used alternatively with light-cured calcium hydroxide in IPC, with a predictability of similar success outcome in patients with deep carious lesions.
- 7 September 2022
- Published by Springer Nature in Cureus
- Vol. 14 (9)
Open AccessComparative Evaluation of the Efficacy of Light-Cured Calcium Hydroxide and a Fourth-Generation Calcium Silicate Cement (TheraCal LC) as Indirect Pulp Capping Materials in Patients With Deep Carious Lesions: A Randomized Parallel-Group Clinical Trial
The current study aims to evaluate and compare the efficacy of light-cured calcium hydroxide and a fourth-generation calcium silicate cement (TheraCal LC®) as indirect pulp capping (IPC) materials in patients with deep carious lesions. A total of 28 patients were randomly divided into two groups (n=14). Group A was managed by light-cured calcium hydroxide, while group B was treated with TheraCal LC (a fourth-generation calcium silicate cement). Clinical examination was conducted to check for postoperative pain, tenderness, and neural sensibility, and radiographical examination was conducted to check for periodontal ligament space widening, presence of calcific barrier, and periapical radiolucency at patient recall of 21 days, three months, and six months. Primary and secondary outcome variables were based on clinical and radiographical success rates noted at six months’ follow-up. Success rate for light-cured calcium hydroxide group at follow-up came out to be 0% at 21 days, 85.71% at three months, and 92.85% at six months. The success rate for TheraCal LC group came out to be 0% at 21 days, 92.85% at three months, and 100% at six months. The overall success rate for IPC procedure was 89.28% at three months’ follow-up and 96.42% at six months’ follow-up for both groups. The difference was statistically non-significant at the end of three and six months’ follow-up. Within the limitations of our study, it was concluded that TheraCal LC can be used alternatively with light-cured calcium hydroxide in IPC, with a predictability of similar success outcome in patients with deep carious lesions.
- Open Access
- 1 September 2022
- Published by Springer Nature in Cureus
- Vol. 14 (9) , e28663
Comparative Evaluation of Shear Bond Strength of Nanohybrid Composite Restoration After the Placement of Flowable Compomer and Composite Using the Snowplow Technique
Aim: Based on the importance of bonding during restoration, this in vitro study aimed to evaluate the difference in shear bond strength of nanohybrid composite restoration in molars after the placement of flowable compomer and composite using the snowplow technique. Materials and methods: Twenty-four freshly extracted molars were taken and sectioned at the level of 2.5 mm from the coronal cusp and root tip. These sections were embedded in methacrylate and, after etching and bonding, were randomly divided into two groups (n=12) for placement of restorative materials. In group A, the plastic tube was filled with uncured flowable composite resin followed by the placement of packable nanohybrid composite in oblique increments. In group B, the plastic tube was filled with uncured flowable compomer followed by the placement of packable nanohybrid composite in oblique increments. Each specimen was then tested under a universal testing machine to determine the shear bond strength. Results: Independent sample 't' test revealed a statistically significant difference between the mean shear bond strength of compomer and composite (P value<0.001), where flowable composite showed higher values compared to compomer. Conclusion: It was seen that the use of composite showed a significantly better bond strength of the restoration when compared to compomer using the snowplow technique. Both materials and application techniques can influence the bond strength of a material as determined in this study.
- 1 September 2022
- Published by Springer Nature in Cureus
- Vol. 14 (9) , e28663
Open AccessComparative Evaluation of Shear Bond Strength of Nanohybrid Composite Restoration After the Placement of Flowable Compomer and Composite Using the Snowplow Technique
Aim: Based on the importance of bonding during restoration, this in vitro study aimed to evaluate the difference in shear bond strength of nanohybrid composite restoration in molars after the placement of flowable compomer and composite using the snowplow technique. Materials and methods: Twenty-four freshly extracted molars were taken and sectioned at the level of 2.5 mm from the coronal cusp and root tip. These sections were embedded in methacrylate and, after etching and bonding, were randomly divided into two groups (n=12) for placement of restorative materials. In group A, the plastic tube was filled with uncured flowable composite resin followed by the placement of packable nanohybrid composite in oblique increments. In group B, the plastic tube was filled with uncured flowable compomer followed by the placement of packable nanohybrid composite in oblique increments. Each specimen was then tested under a universal testing machine to determine the shear bond strength. Results: Independent sample 't' test revealed a statistically significant difference between the mean shear bond strength of compomer and composite (P value<0.001), where flowable composite showed higher values compared to compomer. Conclusion: It was seen that the use of composite showed a significantly better bond strength of the restoration when compared to compomer using the snowplow technique. Both materials and application techniques can influence the bond strength of a material as determined in this study.
- Open Access
- 26 August 2022
- Published by Springer Nature in Cureus
- Vol. 14 (8) , e28420
Utility of Dental Operating Microscopes in Assessing Microleakage of Nanohybrid Resin Restorations Using Different Placement Techniques
Composite resin has become a material of choice due to its aesthetic potential and durability. It is at a lower cost compared to ceramic restorations. But it has a tendency to shrink during polymerization, leading to the formation of gaps at the margins. Placement techniques of restoration can be modified to reduce stress shrinkage. A dental operating microscope will help in the precise and thin layering of composite against the cavity wall and the matrix band. Class I cavities were prepared in 30 human permanent premolars. All cavity surfaces were dried and acid-etched. A bonding agent was applied and they were light-cured. Specimens were divided into three groups: I, II, and III, where restorations were performed using horizontal layering, oblique layering, and split-increment horizontal layering techniques respectively. Samples were then submerged in silver nitrate solution and were examined under a stereomicroscope after a longitudinal section and graded for dye penetration. The dye penetration scores were subjected to a statistical analysis using Analysis of variance (ANOVA) with post hoc Tukey’s test with the statistical software Statistical Package for Social Sciences (SPSS version 12). The level of significance was set at 0.05 for all statistical inferences. The split-increment horizontal layering technique under the dental operating microscope showed less microleakage when compared to other methods and is the preferred method for composite restorations.
- 26 August 2022
- Published by Springer Nature in Cureus
- Vol. 14 (8) , e28420
Open AccessUtility of Dental Operating Microscopes in Assessing Microleakage of Nanohybrid Resin Restorations Using Different Placement Techniques
Composite resin has become a material of choice due to its aesthetic potential and durability. It is at a lower cost compared to ceramic restorations. But it has a tendency to shrink during polymerization, leading to the formation of gaps at the margins. Placement techniques of restoration can be modified to reduce stress shrinkage. A dental operating microscope will help in the precise and thin layering of composite against the cavity wall and the matrix band. Class I cavities were prepared in 30 human permanent premolars. All cavity surfaces were dried and acid-etched. A bonding agent was applied and they were light-cured. Specimens were divided into three groups: I, II, and III, where restorations were performed using horizontal layering, oblique layering, and split-increment horizontal layering techniques respectively. Samples were then submerged in silver nitrate solution and were examined under a stereomicroscope after a longitudinal section and graded for dye penetration. The dye penetration scores were subjected to a statistical analysis using Analysis of variance (ANOVA) with post hoc Tukey’s test with the statistical software Statistical Package for Social Sciences (SPSS version 12). The level of significance was set at 0.05 for all statistical inferences. The split-increment horizontal layering technique under the dental operating microscope showed less microleakage when compared to other methods and is the preferred method for composite restorations.
- Open Access
- 24 August 2022
- Published by Springer Nature in Cureus
- Vol. 14 (8) , e28355
Bridging Gaps: A Comparative Approach to Managing Midline Diastema
Diastema is a common finding in many populations, resulting in poor aesthetics and increasing self-consciousness when smiling. The diastema closure can be done conservatively without the use of braces by employing a variety of alternative treatment techniques, such as direct composite veneers, indirect composite veneers, porcelain laminate veneers, all-ceramic crowns, and metal-ceramic crowns. With the running trend amongst the youth of desiring faster aesthetic results in a stipulated timeframe, it has become a tedious job for the endodontist to satisfy these demands. In this time of crisis, a composite resin buildup offers a one-stop solution to all the vivid demands of the patients. This case report presents a less cumbersome procedure for the correction of midline diastemas by simple usage of stainless steel sectional matrix bands and anterior transparent crowns, which have proved beneficial for correcting these defects. To achieve an ideal smile and superior aesthetics, the usage of direct restorable composites onto the tooth surfaces has proven beneficial, providing the ultimate durability, pleasing aesthetics, and complete patient satisfaction.
- 24 August 2022
- Published by Springer Nature in Cureus
- Vol. 14 (8) , e28355
Open AccessBridging Gaps: A Comparative Approach to Managing Midline Diastema
Diastema is a common finding in many populations, resulting in poor aesthetics and increasing self-consciousness when smiling. The diastema closure can be done conservatively without the use of braces by employing a variety of alternative treatment techniques, such as direct composite veneers, indirect composite veneers, porcelain laminate veneers, all-ceramic crowns, and metal-ceramic crowns. With the running trend amongst the youth of desiring faster aesthetic results in a stipulated timeframe, it has become a tedious job for the endodontist to satisfy these demands. In this time of crisis, a composite resin buildup offers a one-stop solution to all the vivid demands of the patients. This case report presents a less cumbersome procedure for the correction of midline diastemas by simple usage of stainless steel sectional matrix bands and anterior transparent crowns, which have proved beneficial for correcting these defects. To achieve an ideal smile and superior aesthetics, the usage of direct restorable composites onto the tooth surfaces has proven beneficial, providing the ultimate durability, pleasing aesthetics, and complete patient satisfaction.
- Open Access
- 18 August 2022
- Published by Springer Nature in Cureus
- Vol. 14 (8) , e28133
Management of Untreated Horizontal Root Fracture: A Case Report
Traumatic dental injuries often occur to the teeth and their supporting tissues and they are the main reasons for an emergency visit to a dental clinic. Horizontal root fractures usually are characterized by a fracture line that is perpendicular to the long axis of the root. Root fractures are diagnosed through clinical and radiographic examination. Treatment depends on the position of the fracture, the extent of root involvement, correct diagnosis, clinical management, and radiographic follow-up. This article presents endodontic management of horizontal root fracture using a fibre post. A 28-year-old male patient presented with a horizontal fracture of the maxillary left central incisor at the junction of the apical and middle third of the root. Root canal treatment followed by MTA apexification of the coronal fragment and fibre post gave satisfactory results.
- 18 August 2022
- Published by Springer Nature in Cureus
- Vol. 14 (8) , e28133
Open AccessManagement of Untreated Horizontal Root Fracture: A Case Report
Traumatic dental injuries often occur to the teeth and their supporting tissues and they are the main reasons for an emergency visit to a dental clinic. Horizontal root fractures usually are characterized by a fracture line that is perpendicular to the long axis of the root. Root fractures are diagnosed through clinical and radiographic examination. Treatment depends on the position of the fracture, the extent of root involvement, correct diagnosis, clinical management, and radiographic follow-up. This article presents endodontic management of horizontal root fracture using a fibre post. A 28-year-old male patient presented with a horizontal fracture of the maxillary left central incisor at the junction of the apical and middle third of the root. Root canal treatment followed by MTA apexification of the coronal fragment and fibre post gave satisfactory results.