Wen-Cheng Hsu

In this work, an InGaN-based, green micro-photonic crystal-light-emitting-diode (µ-PCLED), which incorporates a nanoporous, GaN-distributed Bragg reflector (DBR) to form a Fabry–Perot (FP) cavity, was fabricated and characterized. Simulations for the µ-PCLED’s optical features were systematically performed and analyzed. Numerical results revealed that the p-GaN photonic crystal (PC) with a filling factor of 0.3 is beneficial for improving the coupling constants of the first- and second-order Bragg diffractions. In addition, based on the product of quantum well (QW) and PC confinement factors, four to six pairs of InGaN QWs should be the preferable design. In order to achieve single-wavelength emission and small full-width at half-maximum (FWHM), the thickness of the n-GaN layer was controlled to be thinner than 920 nm, leading to more than 20 nm wavelength separation between two adjacent FP modes. Experimentally, the fabricated InGaN-based µ-PCLED with a mesa diameter of 30 µm can emit 545 nm green light with FWHM of about 10 nm and negligible blue-shift of about 3 nm in spontaneous emission under the injection current of 1 to 10 mA. Our simulation and experimental results demonstrate that the p-GaN PC design can effectively resolve the wavelength instability issue.

This study conducts comprehensive performance analyses of a commercial photonic-crystal surface-emitting laser (PCSEL) via small-signal measurement and the bit-error-rate test. Meanwhile, the radio frequency characteristics of the PCSEL are unveiled for the first time. Compared to the vertical-cavity surface-emitting lasers, the PCSEL shows great potential for a broader optical bandwidth that is benefited from the high optical-confinement factor. A maximum bandwidth of around 2.32 GHz is experimentally observed when the PCSEL was biased at 340 mA. Moreover, a theoretical calculation was applied to shed light on the characteristics of the small-signal measurement, providing a deep insight into the corresponding intrinsic response model. The signal transmission capability of the PCSEL was investigated as well. The maximum bit rate and corresponding rise time transmitted at 500 Mbps are 1.2 Gbps and 186.16 ps, respectively. Thus, a high-speed PCSEL can be realised with a shrunk form factor, serving as a promising candidate for the next-generation light sources in high-speed optical communication.

Nowadays, the flurry of autonomous vehicles is in full swing regarding light detection and ranging (LiDAR) and depth perception. For such visual perception, light plays an important role. We human beings recognize and distinguish surrounding details when the eye focuses light on the retina. For the LiDAR system, pulsed lasers are employed to measure the relevant range. Thus, appropriate light sources with high performance are in urgent demand. Auspiciously, a revolutionary semiconductor laser technology, namely the photonic-crystal surface-emitting laser (PCSEL), emerges over the past two decades. PCSEL exhibits not only a symmetric beam profile with narrow beam divergence but also a high-power operation with controllability. Therefore, it may be the holy grail for an ultracompact time-of-flight (ToF) LiDAR system. Hereupon, comprehensive analyses of PCSEL-relevant scientific publications and patent documents are conducted. We thereby review the development progress of PCSEL technology. Moreover, a systematic simulation is performed, providing real-time visualization of relevant point clouds with different beam divergence. PCSEL technology with unprecedented merits indeed turns a new leaf and a paradigm shift in LiDAR application is ongoing. It is believed that a lens-free and adjustment-free ultracompact apparatus in simplicity can be expected.

Internet of Things (IoT) technology is prosperous for the betterment of human well-being. With the expeditious needs of miniature functional devices and systems for adaptive optics and light manipulation at will, relevant sensing techniques are thus in the urgent stage of development. Extensive developments in ultrathin artificial structures, namely metasurfaces, are paving the way for the next-generation devices. A bunch of tunable and reconfigurable metasurfaces with diversified catalogs of mechanisms have been developed recently, enabling dynamic light modulation on demand. On the other hand, monolithic integration of metasurfaces and light-emitting sources form ultracompact meta-devices as well as exhibiting desired functionalities. Photon-matter interaction provides revolution in more compact meta-devices, manipulating light directly at the source. This study presents an outlook on this merging paradigm for ultracompact nanophotonics with metasurfaces, also known as metaphotonics. Recent advances in the field hold great promise for the novel photonic devices with light emission and manipulation in simplicity.