Tingting Cai
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Tingting Cai has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Lei Shi
College of Safety and Emergency Management Engineering, Taiyuan University of Technology, Taiyuan 030024, China
2 shared publications - Yulong Jiang
College of Mining Engineering, Taiyuan University of Technology, Taiyuan, China
2 shared publications Jin Xia
College of Safety and Emergency Management Engineering, Taiyuan University of Technology, Taiyuan, China
1 shared publication- Kai Wang
College of Mining Engineering, Taiyuan University of Technology, Taiyuan 030024, China
1 shared publication - Leili Zhang
College of Safety and Emergency Management Engineering, Taiyuan University of Technology, Taiyuan 030024, China
1 shared publication - Xiaoqiang Zhang
School of Mining Engineering, Taiyuan University of Technology, Taiyuan 030024, China
1 shared publication
Latest Publications
- Open Access
- 17 April 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-13
Impact of coal creep on permeability evolution under different temperatures and stresses
The permeability of coal reservoir is the key factor determining the effectiveness of coal-bed methane (CBM) exploitation. In CBM exploitation, the deep coal undergoes time-dependent deformation by the coupling of long-term temperature and stress, resulting in seepage channels evolution and reducing the reservoir permeability. In this paper, the creep and permeability tests of coal at different temperatures and stresses were conducted to study the creep of coal and its impact on permeability. The results shown that during the multi-stage creep, the permeability of coal undergoes instantaneous strain, volume-compressive creep and volume-expansive creep, decreasing gradually and then increasing. The increasing temperature contributes to the occurrence of coal creep. At high temperatures, the creep of coal develops more rapidly, and the impact of coal creep on permeability reduction increases. At the temperature of 150 °C, the permeability reduction is up to 40.35%. Based on the temperature-dependent elastic modulus and viscosity coefficient, a creep model of coal in tri-axial stress and a permeability model considering creep and sorption deformation were established. The creep model and permeability model can well describe the time-dependent deformation and the permeability evolution of coal very well. The results are of great significance for the efficient exploitation of CBM.
- 17 April 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-13
Open AccessImpact of coal creep on permeability evolution under different temperatures and stresses
The permeability of coal reservoir is the key factor determining the effectiveness of coal-bed methane (CBM) exploitation. In CBM exploitation, the deep coal undergoes time-dependent deformation by the coupling of long-term temperature and stress, resulting in seepage channels evolution and reducing the reservoir permeability. In this paper, the creep and permeability tests of coal at different temperatures and stresses were conducted to study the creep of coal and its impact on permeability. The results shown that during the multi-stage creep, the permeability of coal undergoes instantaneous strain, volume-compressive creep and volume-expansive creep, decreasing gradually and then increasing. The increasing temperature contributes to the occurrence of coal creep. At high temperatures, the creep of coal develops more rapidly, and the impact of coal creep on permeability reduction increases. At the temperature of 150 °C, the permeability reduction is up to 40.35%. Based on the temperature-dependent elastic modulus and viscosity coefficient, a creep model of coal in tri-axial stress and a permeability model considering creep and sorption deformation were established. The creep model and permeability model can well describe the time-dependent deformation and the permeability evolution of coal very well. The results are of great significance for the efficient exploitation of CBM.
- Open Access
Synchronous Fracture Expansion Pattern of Hydraulic Fracturing with Different Perforation Spacing
Using the self-developed “TCHFSM-I” large-size true triaxial fracturing seepage simulation device and fluid injection flow dynamic monitoring device, we studied the crack initiation and expansion law of multi-fractures under different perforation spacing conditions and revealed the mechanism of multi-fractures expanding from non-equilibrium to equilibrium on the basis of the evolution law of the injection pressure and characteristics of the distribution of the injection flow. The results show that when the perforation spacing is small (<60 mm), the central injection fracturing cracks are affected by the extension of the upper and lower injection cracks, and their extension lengths are shorter; on the contrary, the extension lengths of the upper, central and lower injection cracks are basically the same, and the three hydraulically fractured cracks shift from non-equilibrium to equilibrium extension. When the perforation spacing is small, the fracture initiation pressure of the middle perforation is much larger than that of the upper and lower perforations. However, as the perforation spacing increases, the fracture initiation pressure of the middle perforation gradually decreases. Its fracture initiation pressure is basically the same as that of the upper and lower perforations. The expansion of the three hydraulically fractured cracks is independent of each other. In addition, the evolution law of the injection flow rate can better reflect the multi-fracture fracture initiation and expansion pattern, and the evolution pattern of the injection flow rate can better reflect the synchronous fracture initiation and expansion mechanism of multi-fracture fracture. The results of the study can provide technical guidance for efficient coalbed methane extraction.
Open AccessSynchronous Fracture Expansion Pattern of Hydraulic Fracturing with Different Perforation Spacing
Using the self-developed “TCHFSM-I” large-size true triaxial fracturing seepage simulation device and fluid injection flow dynamic monitoring device, we studied the crack initiation and expansion law of multi-fractures under different perforation spacing conditions and revealed the mechanism of multi-fractures expanding from non-equilibrium to equilibrium on the basis of the evolution law of the injection pressure and characteristics of the distribution of the injection flow. The results show that when the perforation spacing is small (<60 mm), the central injection fracturing cracks are affected by the extension of the upper and lower injection cracks, and their extension lengths are shorter; on the contrary, the extension lengths of the upper, central and lower injection cracks are basically the same, and the three hydraulically fractured cracks shift from non-equilibrium to equilibrium extension. When the perforation spacing is small, the fracture initiation pressure of the middle perforation is much larger than that of the upper and lower perforations. However, as the perforation spacing increases, the fracture initiation pressure of the middle perforation gradually decreases. Its fracture initiation pressure is basically the same as that of the upper and lower perforations. The expansion of the three hydraulically fractured cracks is independent of each other. In addition, the evolution law of the injection flow rate can better reflect the multi-fracture fracture initiation and expansion pattern, and the evolution pattern of the injection flow rate can better reflect the synchronous fracture initiation and expansion mechanism of multi-fracture fracture. The results of the study can provide technical guidance for efficient coalbed methane extraction.
- Open Access
- 2 August 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (15) , 9462
The Influence of Coal Meso-Structure on Adsorption Characteristics of Coking and Lean Coal
The non-uniform adsorption characteristics of coal strictly restrict the development and utilization of CBM, and the structure of coal is the fundamental reason for its non-uniform adsorption of methane. To investigate the fundamental causes of methane adsorption capacity differences in coal with various meso-structures, small coking coal and lean coal samples were subjected to isothermal adsorption, computed tomography (CT) scanning, scanning electron microscopy (SEM), and mercury intrusion porosimetry (MIP) to obtain the correlation between the meso-structure of coal and its non-uniform adsorption characteristics. The reasons for the differences in methane adsorption capacity between the specimens were summarized from the perspectives of material and structural heterogeneities, meso-morphology and pore size distribution. The following conclusions could be drawn: (1) The coal samples with different heterogeneity degrees exhibit varying methane adsorption capacities. (2) Compared to the specific surface area, the mineral composition exerts a greater influence on the adsorption capacity of the coal samples. (3) The gas adsorption capacities of the coal samples with similar meso-morphology and pore size distribution characteristics are similar, while among the coal samples with similar pore size distributions but different meso-morphologies, the gas adsorption capacities significantly differ.
- 2 August 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (15) , 9462
Open AccessThe Influence of Coal Meso-Structure on Adsorption Characteristics of Coking and Lean Coal
The non-uniform adsorption characteristics of coal strictly restrict the development and utilization of CBM, and the structure of coal is the fundamental reason for its non-uniform adsorption of methane. To investigate the fundamental causes of methane adsorption capacity differences in coal with various meso-structures, small coking coal and lean coal samples were subjected to isothermal adsorption, computed tomography (CT) scanning, scanning electron microscopy (SEM), and mercury intrusion porosimetry (MIP) to obtain the correlation between the meso-structure of coal and its non-uniform adsorption characteristics. The reasons for the differences in methane adsorption capacity between the specimens were summarized from the perspectives of material and structural heterogeneities, meso-morphology and pore size distribution. The following conclusions could be drawn: (1) The coal samples with different heterogeneity degrees exhibit varying methane adsorption capacities. (2) Compared to the specific surface area, the mineral composition exerts a greater influence on the adsorption capacity of the coal samples. (3) The gas adsorption capacities of the coal samples with similar meso-morphology and pore size distribution characteristics are similar, while among the coal samples with similar pore size distributions but different meso-morphologies, the gas adsorption capacities significantly differ.
- Open Access
A Core Damage Constitutive Model for the Time-Dependent Creep and Relaxation Behavior of Coal
The creep and stress relaxation behaviors of coal are common in coal mining. The unified constitutive model is suitable to describe and predict both the creep and relaxation evolution characteristics of rocks. The generalized Kelvin model is the core element for traditional and improved component models to reflect both the nonlinear creep and relaxation. In this paper, an improved core damage model, which could both reflect the creep and stress relaxation in relation to the damage evolution, was established based on a comparison of the traditional and improved component models, and the responding constitutive equations (creep and stress relaxation equation) at constant stress/strain were deduced. Then, the core damage model was validated to the uniaxial compressive multistage creep and stress relaxation test results of coal, showing that the model curves had great accordance with the experimental data. Moreover, the model comparisons on accuracy, parameter meaning, and popularization among the core damage model, hardening-damage model, and the fractional derivative model were further discussed. The results showed that the parameters in the core damage model had clear and brief physical significances. The core damage model was also popularized to depict the time-dependent behaviors of other rocks, showing great accuracy.
Open AccessA Core Damage Constitutive Model for the Time-Dependent Creep and Relaxation Behavior of Coal
The creep and stress relaxation behaviors of coal are common in coal mining. The unified constitutive model is suitable to describe and predict both the creep and relaxation evolution characteristics of rocks. The generalized Kelvin model is the core element for traditional and improved component models to reflect both the nonlinear creep and relaxation. In this paper, an improved core damage model, which could both reflect the creep and stress relaxation in relation to the damage evolution, was established based on a comparison of the traditional and improved component models, and the responding constitutive equations (creep and stress relaxation equation) at constant stress/strain were deduced. Then, the core damage model was validated to the uniaxial compressive multistage creep and stress relaxation test results of coal, showing that the model curves had great accordance with the experimental data. Moreover, the model comparisons on accuracy, parameter meaning, and popularization among the core damage model, hardening-damage model, and the fractional derivative model were further discussed. The results showed that the parameters in the core damage model had clear and brief physical significances. The core damage model was also popularized to depict the time-dependent behaviors of other rocks, showing great accuracy.