AMAya M. Matloob

Aya M. Matloob

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Aya M. Matloob has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Activating TiO 2 for visible light photocatalysis: a calcination approach to diesel photo-desulfurization under visible light

    by Asmaa S. Morshedy, Aya M. Matloob

    The increasing demand for clean fuels, coupled with stringent sulfur emission regulations, has driven the need for efficient and sustainable desulfurization technologies. In this study, a visible-light-active Black-TiO2 by carbonization of Ti-MOF under vacuum was developed and evaluated for the photocatalytic desulfurization for sulfur-containing pollutant in diesel fuel that poses significant environmental risks. The White-TiO2, Black-TiO2, and Ti-MOF were synthesized through a simple method and comprehensively characterized using XRD, FT-IR, Raman spectroscopy, BET surface area analysis, SEM-mapping, UV-vis diffuse reflectance spectroscopy, and photoluminescence measurements. The Black-TiO2 (Ti@C) demonstrated superior photocatalytic performance compared to individual W-TiO2 or Ti-MOF catalysts, attributed to improved charge separation, reduced band gap, and strong interfacial interactions between Ti and C under visible light. Key operational parameters, including catalyst dosage, H2O2 concentration, and irradiation time, significantly influenced the degradation efficiency. Remarkable degradation efficiencies of 97.99% for real diesel feedstock (1300 ppm sulfur) for LHL, 99.53% under sunlight were achieved, with acetonitrile extraction effectively removing the oxidized sulfur compounds. The catalyst maintained excellent stability and reusability over six consecutive cycles, demonstrating its potential for practical fuel desulfurization applications. This research presents an environmentally friendly, a highly cost-effective, and energy-efficient approach to producing ultra-low sulfur fuels using solar energy.


  • Enhancing ultrasound‐assisted oxidative desulfurization of fuels using hierarchical metal–organic framework and ordered mesoporous silica composite

    by Heba M. Salem, Aya M. Matloob, Raed M. Hegazey, Asmaa I. Zahran

    BACKGROUND: The demand for ultra‐clean fuels with sulfur content below 15 ppm has intensified due to increasingly stringent environmental regulations. Traditional hydrodesulfurization methods face limitations in removing refractory sulfur compounds, necessitating the development of efficient alternative approaches. Ultrasound‐assisted oxidative desulfurization (UAODS) has emerged as a promising method owing to its mild conditions and high efficiency. In this context, bismuth‐based metal–organic frameworks (Bi‐MOFs), recognized for their redox properties and structural tunability, were integrated with ordered mesoporous silica (MS) to form a novel hybrid catalyst (Bi‐MOF/MS).RESULTS: This study presents the synthesis and application of a hierarchical Bi‐MOF/MS catalyst for UAODS. The catalyst was comprehensively characterized using X‐ray diffraction (wide and small‐angle), X‐ray photoelectron spectroscopy, Brunauer–Emmett–Teller analysis, Fourier transform infrared spectroscopy, and transmission electron microscopy, confirming its high crystallinity, ordered porous structure, and strong Bi‐MOF/MS interaction. The effect of operational parameters, including ultrasound power, catalyst dosage, oxidant concentration, reaction temperature, reaction time, and extraction solvents, was systematically evaluated. Under optimized conditions, the Bi‐MOF/MS catalyst achieved a sulfur removal efficiency of 97.2%. Kinetic studies and recycling experiments revealed stable performance, with 86.8% desulfurization efficiency retained after five cycles.CONCLUSION: The integration of ordered MS with hierarchical Bi‐MOF enhanced the structural stability, surface area, and synergistic interaction of the composite, leading to excellent catalytic activity and reusability. These findings establish the Bi‐MOF/MS hybrid catalyst as a promising candidate for efficient and sustainable production of ultra‐low‐sulfur fuels. © 2025 Society of Chemical Industry (SCI).


  • Open Access

    Hybrid Nanoarchitectonics with Cr, Fe-MOF/ Graphene Nanocomposite for Removal of Organic Sulfur Compounds from Diesel Fuel

    by Aya M. Matloob, Dalia R. Abd El-Hafiz, L. Saad, S. Mikhail

    Metal–organic frameworks (Cr-MOF and Fe-MOF) and their graphene hybride nano-composites were prepared via green solvo-themal method. The prepared samples were characterized by XRD, FTIR spectroscopy, N2 adsorption–desorption isotherm and XPS. The composites were used for the adsorption of thiophenic sulfur compound (thiophene, dibenzothiophene, 4,6-dimethyldibenzothiophene) in a model fuel oil. It was found that, graphene in the MOF composite has positive effect on sulfur removal. The removal efficiency increase from 62% to % 95.6 using Fe-MOF and Fe-MOF/Gr (9:1), respectively. This enhancement effect is attributed to a greater number of coordinatively unsaturated sites (CUS) in the composites. The results indicated that the adsorption reach to 96.6% for DBT adsorption from model diesel oil and 62% for diesel fuel on using Cr-MOF/Gr composite.


  • Open Access

    Cr, Fe-MOF/ Graphene Hybrid Nanocomposite for Ultra Removal of Organic Sulfur Compounds from Diesel Fuel

    by Aya M. Matloob, Dalia R. Abd El-Hafiz, Lamia Saad, S. Mikhail

    Metal-organic frameworks (Cr-MOF and Fe-MOF) and their graphene hybrid nano-composites were prepared via the green solvo-thermal method. The prepared samples were characterized by XRD, FTIR spectroscopy, N2 adsorption-desorption isotherm, and XPS. The composites were used for the adsorption of thiophenic sulfur compound (thiophene, dibenzothiophene, 4,6-dimethyldibenzothiophene) in a model fuel oil. It was found that graphene in the MOF composite has a positive effect on sulfur removal. The removal efficiency increase from 62 % to % 95.6 using Fe-MOF and Fe-MOF/Gr (9:1), respectively. This enhancement effect is attributed to a higher number of coordinatively unsaturated sites (CUS) in the composites. The results indicated that the adsorption reaches to 96.6% for DBT adsorption from model diesel oil and 62% for diesel fuel on using Cr-MOF/Gr composite.