Fatih Ünal
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Fatih Ünal has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
- Sitki Aktas
GİRESUN ÜNİVERSİTESİ, MÜHENDİSLİK FAKÜLTESİ
7 shared publications Tayfun Arslan
Department of Chemistry, Faculty of Science, Giresun University, Giresun, Türkiye
5 shared publicationsMustafa Sukru Kurt
4 shared publicationsSitki Aktas
Department of Mechanical Engineering, Giresun University, Giresun, Türkiye
4 shared publicationsBurhan Coşkun
Department of Physics, Faculty of Art and Science, Kirklareli University, Kirklareli, Türkiye
3 shared publications- Mahmut Gür
Department of Forest Industrial Engineering, Forest Faculty, Kastamonu University, Kastamonu, Turkey
3 shared publications
Latest Publications
- 15 September 2025
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 36 (26) , 1-14
Surface and electrical characterizations of Ag/TiO2 and Ag/Ag-doped TiO2 nanoporous Schottky barrier diodes
- 15 September 2025
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 36 (26) , 1-14
Surface and electrical characterizations of Ag/TiO2 and Ag/Ag-doped TiO2 nanoporous Schottky barrier diodes
- 19 August 2025
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 36 (23) , 1-12
Photodiode and photodetector characteristics of Ag/MnPc/Si/Ag and Ag/MnPc/SiO2/Ag heterojunctions
- 19 August 2025
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 36 (23) , 1-12
Photodiode and photodetector characteristics of Ag/MnPc/Si/Ag and Ag/MnPc/SiO2/Ag heterojunctions
- Open Access
- 28 January 2025
- Published by Elsevier in Engineering Science and Technology, an International Journal
- Vol. 62
Enhanced sensing capabilities of UV–visible p-n and p-i-n photodiodes using unique layer and contact configurations
- 28 January 2025
- Published by Elsevier in Engineering Science and Technology, an International Journal
- Vol. 62
Open AccessEnhanced sensing capabilities of UV–visible p-n and p-i-n photodiodes using unique layer and contact configurations
- Open Access
- 31 December 2024
- Published by Kirklareli Universitesi Muhendislik ve Fen Bilimleri Dergisi in Kırklareli Üniversitesi Mühendislik ve Fen Bilimleri Dergisi
- Vol. 10 (2) , 246-255
Diode and Photodetector Characterization of Van der Waals Type InSe/CdS Heterojunction Device
In this study, an InSe thin film layer was deposited onto a CdS thin film layer produced via the chemical bath deposition (CBD) method using the Successive Ionic Layer Adsorption and Reaction (SILAR) technique. The produced heterojunction devices were divided into two groups, and one group was annealed in an ambient atmosphere at 80°C for 1 hour. The electrical characterization of both heterojunction devices was performed in the dark and under an illumination intensity of 100 mW/cm². The fundamental diode parameters (n, ϕb, Rs, I0)were analyzed using different methods. Furthermore, key photodetector parameters such as photocurrent, photoresponsivity, photosensitivity, and specific detectivity were determined for these two devices.
- 31 December 2024
- Published by Kirklareli Universitesi Muhendislik ve Fen Bilimleri Dergisi in Kırklareli Üniversitesi Mühendislik ve Fen Bilimleri Dergisi
- Vol. 10 (2) , 246-255
Open AccessDiode and Photodetector Characterization of Van der Waals Type InSe/CdS Heterojunction Device
In this study, an InSe thin film layer was deposited onto a CdS thin film layer produced via the chemical bath deposition (CBD) method using the Successive Ionic Layer Adsorption and Reaction (SILAR) technique. The produced heterojunction devices were divided into two groups, and one group was annealed in an ambient atmosphere at 80°C for 1 hour. The electrical characterization of both heterojunction devices was performed in the dark and under an illumination intensity of 100 mW/cm². The fundamental diode parameters (n, ϕb, Rs, I0)were analyzed using different methods. Furthermore, key photodetector parameters such as photocurrent, photoresponsivity, photosensitivity, and specific detectivity were determined for these two devices.
- Open Access
- 15 December 2024
- Published by Karadeniz Fen Bilimleri Dergisi in Karadeniz Fen Bilimleri Dergisi
- Vol. 14 (4) , 2302-2310
Comparison of Optical Parameters of Transparent Metal Oxide CdO and CdAlO Thin Films Produced by Electrochemical Deposition
In this study, CdO and CdAlO thin films were produced using a single-step electrochemical deposition method, and their basic optical parameters were compared. Optical analysis was performed in the wavelength range of 300-700 nm. As a result of the optical analysis, it was observed that the CdAlO thin film was more transparent at higher wavelengths and had a higher absorption capacity at lower wavelengths compared to the CdO thin film. The maximum transmittance (T%) was 43% for the CdO thin film and 55% for the CdAlO thin film. At 300 nm, the reflection (R%) value of the CdO thin film was 6.5%, while the R% value of the CdAlO thin film was 7.5%. The maximum absorption coefficient (α) value of the CdO thin film was 1.9x10⁶ m⁻¹, while the maximum α of the CdAlO thin film was 2.9x10⁶ m⁻¹. At 300 nm, the extinction coefficient (k), refractive index (n), energy band gap (Eg), and optical conductivity (σ) values of the CdO thin film were 0.04, 1.26, 2.82 eV, and 5.9x10¹⁴, respectively, while for the CdAlO thin film, these values were 0.07, 1.31, 3.11 eV, and 9.2x10¹⁴, respectively. Based on these results, it was concluded that the CdAlO thin film exhibited higher values compared to the CdO thin film.
- 15 December 2024
- Published by Karadeniz Fen Bilimleri Dergisi in Karadeniz Fen Bilimleri Dergisi
- Vol. 14 (4) , 2302-2310
Open AccessComparison of Optical Parameters of Transparent Metal Oxide CdO and CdAlO Thin Films Produced by Electrochemical Deposition
In this study, CdO and CdAlO thin films were produced using a single-step electrochemical deposition method, and their basic optical parameters were compared. Optical analysis was performed in the wavelength range of 300-700 nm. As a result of the optical analysis, it was observed that the CdAlO thin film was more transparent at higher wavelengths and had a higher absorption capacity at lower wavelengths compared to the CdO thin film. The maximum transmittance (T%) was 43% for the CdO thin film and 55% for the CdAlO thin film. At 300 nm, the reflection (R%) value of the CdO thin film was 6.5%, while the R% value of the CdAlO thin film was 7.5%. The maximum absorption coefficient (α) value of the CdO thin film was 1.9x10⁶ m⁻¹, while the maximum α of the CdAlO thin film was 2.9x10⁶ m⁻¹. At 300 nm, the extinction coefficient (k), refractive index (n), energy band gap (Eg), and optical conductivity (σ) values of the CdO thin film were 0.04, 1.26, 2.82 eV, and 5.9x10¹⁴, respectively, while for the CdAlO thin film, these values were 0.07, 1.31, 3.11 eV, and 9.2x10¹⁴, respectively. Based on these results, it was concluded that the CdAlO thin film exhibited higher values compared to the CdO thin film.
- 30 September 2024
- Published by Elsevier in Physica B: Condensed Matter
- Vol. 695
Photodetector performance analysis of a hybrid MnPc/DLC device with high photoresponsivity, sensitivity, and On/Off ratio
- 30 September 2024
- Published by Elsevier in Physica B: Condensed Matter
- Vol. 695
Photodetector performance analysis of a hybrid MnPc/DLC device with high photoresponsivity, sensitivity, and On/Off ratio
- 18 December 2023
- Published by Springer Nature in Journal of Materials Research
- Vol. 39 (4) , 675-688
Investigation of photodetector and photovoltaic properties of H2Pc/CuO and H2Pc/ITO junctions produced with modified H2Pc
- 18 December 2023
- Published by Springer Nature in Journal of Materials Research
- Vol. 39 (4) , 675-688
Investigation of photodetector and photovoltaic properties of H2Pc/CuO and H2Pc/ITO junctions produced with modified H2Pc
- Open Access
- 15 December 2023
- Published by Karadeniz Fen Bilimleri Dergisi in Karadeniz Fen Bilimleri Dergisi
- Vol. 13 (4) , 1798-1806
Ag/pentasen/Cu MIM Yapısının Optoelektronik Özelliklerinin İncelenmesi
Ag/pentasen/Cu MIM yapısı (metal-insulator-metal) termal buharlaştırma yöntemi kullanılarak başarılı bir şekilde üretilmiştir. Üretilen yapının temel I-V karakterizasyonu karanlık ve 20, 40, 60, 80, 100 mW.cm-2 ışık şiddetinde incelenmiştir. MIM yapısının diyot parametreleri; idealite faktörü (n), engel yüksekliği (ϕb), ters doyma akımı (I0), seri direnç (Rs) ve Shunt direnç (Rsh) değerleri hem karanlık hem de farklı ışık şiddetlerinde belirlenmiştir. Karanlık ortamda sırasıyla n, ϕb, I0, Rs ve Rsh değerleri 7.95, 0.31 eV, 1.95x10-6 A, 3.13x104 Ω ile 3.85 x104 Ω olduğu belirlenmiştir. Ayrıca üretilen MIM yapısının fotodedektör parametreleri; fotoakım (Iph), duyarlılık (R) ve özgül dedektiflik (D*) değerleri de farklı ışık şiddetlerinde incelenmiştir ve maksimum değerlerin sırasıyla 7.85x10-5 A, 6.09x10-3 A.W-1 ve 1.86x107 Jones olduğu belirlenmiştir.
- 15 December 2023
- Published by Karadeniz Fen Bilimleri Dergisi in Karadeniz Fen Bilimleri Dergisi
- Vol. 13 (4) , 1798-1806
Open AccessAg/pentasen/Cu MIM Yapısının Optoelektronik Özelliklerinin İncelenmesi
Ag/pentasen/Cu MIM yapısı (metal-insulator-metal) termal buharlaştırma yöntemi kullanılarak başarılı bir şekilde üretilmiştir. Üretilen yapının temel I-V karakterizasyonu karanlık ve 20, 40, 60, 80, 100 mW.cm-2 ışık şiddetinde incelenmiştir. MIM yapısının diyot parametreleri; idealite faktörü (n), engel yüksekliği (ϕb), ters doyma akımı (I0), seri direnç (Rs) ve Shunt direnç (Rsh) değerleri hem karanlık hem de farklı ışık şiddetlerinde belirlenmiştir. Karanlık ortamda sırasıyla n, ϕb, I0, Rs ve Rsh değerleri 7.95, 0.31 eV, 1.95x10-6 A, 3.13x104 Ω ile 3.85 x104 Ω olduğu belirlenmiştir. Ayrıca üretilen MIM yapısının fotodedektör parametreleri; fotoakım (Iph), duyarlılık (R) ve özgül dedektiflik (D*) değerleri de farklı ışık şiddetlerinde incelenmiştir ve maksimum değerlerin sırasıyla 7.85x10-5 A, 6.09x10-3 A.W-1 ve 1.86x107 Jones olduğu belirlenmiştir.
- 7 August 2023
- Published by IOP Publishing in Physica Scripta
- Vol. 98 (9) , 095504
Investigation of fundamental electrical and optoelectronic properties of an organic- and carbon-based MnPc/GC photodiode with high photosensitivity
The aim of this work is to provide an alternative to optoelectronic devices that use carbon and organic materials. To achieve this, we coated a modified MnPc organic semiconductor compound onto a graphite-like carbon (GC) thin film using the thermal evaporation technique, and fabricated an organic-based, highly light-sensitive MnPc/GC hybrid heterojunction. The heterojunction had a transmittance of approximately 60% in the visible region, an absorption coefficient of ∼106 m−1, and an energy band gap of 2.6 eV. Subsequently, Ag contacts were grown on the surface of each layer, and the Ag/MnPc/GC/Ag photodiode was subjected to fundamental electrical analysis at various light intensities and a ±3 V applied potential. Analysis in a dark environment revealed that the photodiode had a rectification ratio of 2.59 × 103, a series resistance of 28 Ω, and a shunt resistance of 4.17 × 104 Ω, as calculated from Ohm’s law. The diode ideality factor and barrier height of the photodiode were determined from thermionic emission theory to be 5.60 and 0.71 eV, respectively, and it was observed that these decreased with increasing light intensity. The photodetector parameters of the MnPc/GC hybrid photodiode were determined under positive and negative applied potentials at various light intensities. The highest photocurrent, photoconductive responsivity, photosensitivity, and specific detectivity were determined to be 1.512 × 10−1 A, 11.52 A.W−1, 9.83 × 105, and 2.48 × 1012 Jones, respectively, which were significantly higher than those reported in literature for organic and inorganic-based photodiodes. Based on the findings, it was concluded that the Ag/MnPc/GC/Ag photodiode holds promise as an alternative for sensors, solar cells, photodetectors, and optoelectronic communications applications.
- 7 August 2023
- Published by IOP Publishing in Physica Scripta
- Vol. 98 (9) , 095504
Investigation of fundamental electrical and optoelectronic properties of an organic- and carbon-based MnPc/GC photodiode with high photosensitivity
The aim of this work is to provide an alternative to optoelectronic devices that use carbon and organic materials. To achieve this, we coated a modified MnPc organic semiconductor compound onto a graphite-like carbon (GC) thin film using the thermal evaporation technique, and fabricated an organic-based, highly light-sensitive MnPc/GC hybrid heterojunction. The heterojunction had a transmittance of approximately 60% in the visible region, an absorption coefficient of ∼106 m−1, and an energy band gap of 2.6 eV. Subsequently, Ag contacts were grown on the surface of each layer, and the Ag/MnPc/GC/Ag photodiode was subjected to fundamental electrical analysis at various light intensities and a ±3 V applied potential. Analysis in a dark environment revealed that the photodiode had a rectification ratio of 2.59 × 103, a series resistance of 28 Ω, and a shunt resistance of 4.17 × 104 Ω, as calculated from Ohm’s law. The diode ideality factor and barrier height of the photodiode were determined from thermionic emission theory to be 5.60 and 0.71 eV, respectively, and it was observed that these decreased with increasing light intensity. The photodetector parameters of the MnPc/GC hybrid photodiode were determined under positive and negative applied potentials at various light intensities. The highest photocurrent, photoconductive responsivity, photosensitivity, and specific detectivity were determined to be 1.512 × 10−1 A, 11.52 A.W−1, 9.83 × 105, and 2.48 × 1012 Jones, respectively, which were significantly higher than those reported in literature for organic and inorganic-based photodiodes. Based on the findings, it was concluded that the Ag/MnPc/GC/Ag photodiode holds promise as an alternative for sensors, solar cells, photodetectors, and optoelectronic communications applications.