Jeekin Lau
Research Subjects
Jeekin Lau has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Oscar Riera-Lizarazu
Department of Horticultural Sciences, Texas A&M University, College Station, TX, United States
8 shared publications - Cristiane Hayumi Taniguti
Breeding Insight Cornell University Ithaca New York USA
6 shared publications - David H. Byrne
Department of Horticultural Sciences, TX A&M University, College Station, TX 77843-2133, USA
5 shared publications - Gabriel de Siqueira Gesteira
Department of Horticultural Science North Carolina State University Raleigh North Carolina USA
4 shared publications - Marcelo Mollinari
Department of Horticultural Science, North Carolina State University , Kilgore Hall, 2721 Founders Dr, Raleigh, NC 27607
4 shared publications David H. Byrne
Department of Horticultural Sciences Texas A&M University College Station Texas USA
3 shared publications
Latest Publications
- Open Access
- 23 June 2025
- Published by Wiley in The Plant Genome
- Vol. 18 (2) , e70044
Exploring chromosomal variations in garden roses: Insights from high‐density SNP array data and a new tool, Qploidy
Roses ( Rosa L.) are among the most economically important ornamentals worldwide, with ploidy ranging from diploid (2x) to hendecaploid (11x), though most cultivars are diploid (2x), triploid (3x), or tetraploid (4x). To enable large‐scale analyses of ploidy and aneuploidy in roses using high‐density single nucleotide polymorphism (SNP) array data, we developed Qploidy, an R package. Qploidy leverages tools for estimating allele dosage, adapts methods from human genetics for copy number estimation, and optimizes the standardization of allele intensity ( R ) and B allele frequency (BAF) for ploidy levels greater than 2x. With Qploidy, we analyzed a dataset of 1944 samples consisting of 588 samples from a germplasm collection and 1356 samples from 14 biparental mapping populations. The majority of genotypes in the germplasm collection were tetraploid (56%), followed by diploids (20%) and triploids (11%). The percentage of aneuploids was lower in the germplasm collection (2%) compared to biparental populations (16%). Reduced fitness likely explains the higher frequency of aneuploids in mapping populations compared to the germplasm collection, where stronger selective pressures normally act. In tetraploid biparental populations, pentasomy (65%) was significantly more common than trisomy (19%). Also, aneuploid states were predominantly transmitted through the female parent (87%), suggesting greater gametophyte sensitivity to chromosome number variation, particularly the loss of a chromosome. Since aneuploidy disturbs linkage and quantitative trait loci (QTL) analyses, Qploidy may also be used to guide the removal of aneuploid‐affected data prior to downstream analysis. Besides roses, Qploidy can be used to study ploidy and aneuploidy in other polyploid species.
- 23 June 2025
- Published by Wiley in The Plant Genome
- Vol. 18 (2) , e70044
Open AccessExploring chromosomal variations in garden roses: Insights from high‐density SNP array data and a new tool, Qploidy
Roses ( Rosa L.) are among the most economically important ornamentals worldwide, with ploidy ranging from diploid (2x) to hendecaploid (11x), though most cultivars are diploid (2x), triploid (3x), or tetraploid (4x). To enable large‐scale analyses of ploidy and aneuploidy in roses using high‐density single nucleotide polymorphism (SNP) array data, we developed Qploidy, an R package. Qploidy leverages tools for estimating allele dosage, adapts methods from human genetics for copy number estimation, and optimizes the standardization of allele intensity ( R ) and B allele frequency (BAF) for ploidy levels greater than 2x. With Qploidy, we analyzed a dataset of 1944 samples consisting of 588 samples from a germplasm collection and 1356 samples from 14 biparental mapping populations. The majority of genotypes in the germplasm collection were tetraploid (56%), followed by diploids (20%) and triploids (11%). The percentage of aneuploids was lower in the germplasm collection (2%) compared to biparental populations (16%). Reduced fitness likely explains the higher frequency of aneuploids in mapping populations compared to the germplasm collection, where stronger selective pressures normally act. In tetraploid biparental populations, pentasomy (65%) was significantly more common than trisomy (19%). Also, aneuploid states were predominantly transmitted through the female parent (87%), suggesting greater gametophyte sensitivity to chromosome number variation, particularly the loss of a chromosome. Since aneuploidy disturbs linkage and quantitative trait loci (QTL) analyses, Qploidy may also be used to guide the removal of aneuploid‐affected data prior to downstream analysis. Besides roses, Qploidy can be used to study ploidy and aneuploidy in other polyploid species.
- Open Access
- 27 July 2023
- Published by Frontiers Media SA in Frontiers in Plant Science
- Vol. 14, 1209445
QTL discovery for resistance to black spot and cercospora leaf spot, and defoliation in two interconnected F1 bi-parental tetraploid garden rose populations
Garden roses are an economically important horticultural crop worldwide, and two major fungal pathogens, black spot (Diplocarpon rosae F.A. Wolf) and cercospora leaf spot of rose (Rosisphaerella rosicola Pass.), affect both the health and ornamental value of the plant. Most studies on black spot disease resistance have focused on diploid germplasm, and little work has been performed on cercospora leaf spot resistance. With the use of newly developed software tools for autopolyploid genetics, two interconnected tetraploid garden rose F1 populations (phenotyped over the course of 3 years) were used for quantitative trait locus (QTL) analysis of black spot and cercospora leaf spot resistance as well as plant defoliation. QTLs for black spot resistance were mapped to linkage groups (LGs) 1–6. QTLs for cercospora resistance and susceptibility were found in LGs 1, 4, and 5 and for defoliation in LGs 1, 3, and 5. The major locus on LG 5 for black spot resistance coincides with the previously discovered Rdr4 locus inherited from Rosa L. ‘Radbrite’ (Brite Eyes™), the common parent used in these mapping populations. This work is the first report of any QTL for cercospora resistance/susceptibility in tetraploid rose germplasm and the first report of defoliation QTL in roses. A major QTL for cercospora susceptibility coincides with the black spot resistance QTL on LG 5 (Rdr4). A major cercospora resistance QTL was found on LG 1. These populations provide a genetic resource that will further the knowledge base of rose genetics as more traits are studied. Studying more traits from these populations will allow for the stacking of various QTLs for desirable traits.
- 27 July 2023
- Published by Frontiers Media SA in Frontiers in Plant Science
- Vol. 14, 1209445
Open AccessQTL discovery for resistance to black spot and cercospora leaf spot, and defoliation in two interconnected F1 bi-parental tetraploid garden rose populations
Garden roses are an economically important horticultural crop worldwide, and two major fungal pathogens, black spot (Diplocarpon rosae F.A. Wolf) and cercospora leaf spot of rose (Rosisphaerella rosicola Pass.), affect both the health and ornamental value of the plant. Most studies on black spot disease resistance have focused on diploid germplasm, and little work has been performed on cercospora leaf spot resistance. With the use of newly developed software tools for autopolyploid genetics, two interconnected tetraploid garden rose F1 populations (phenotyped over the course of 3 years) were used for quantitative trait locus (QTL) analysis of black spot and cercospora leaf spot resistance as well as plant defoliation. QTLs for black spot resistance were mapped to linkage groups (LGs) 1–6. QTLs for cercospora resistance and susceptibility were found in LGs 1, 4, and 5 and for defoliation in LGs 1, 3, and 5. The major locus on LG 5 for black spot resistance coincides with the previously discovered Rdr4 locus inherited from Rosa L. ‘Radbrite’ (Brite Eyes™), the common parent used in these mapping populations. This work is the first report of any QTL for cercospora resistance/susceptibility in tetraploid rose germplasm and the first report of defoliation QTL in roses. A major QTL for cercospora susceptibility coincides with the black spot resistance QTL on LG 5 (Rdr4). A major cercospora resistance QTL was found on LG 1. These populations provide a genetic resource that will further the knowledge base of rose genetics as more traits are studied. Studying more traits from these populations will allow for the stacking of various QTLs for desirable traits.
- Open Access
Meta-Analysis of Rose Rosette Disease-Resistant Quantitative Trait Loci and a Search for Candidate Genes
Rose rosette disease (RRD), caused by the rose rosette emaravirus (RRV), is a major viral disease in roses (Rosa sp.) that threatens the rose industry. Recent studies have revealed quantitative trait loci (QTL) for reduced susceptibility to RRD in the linkage groups (LGs) 1, 5, 6, and 7 in tetraploid populations and the LGs 1, 3, 5, and 6 in diploid populations. In this study, we seek to better localize and understand the relationship between QTL identified in both diploid and tetraploid populations. We do so by remapping the populations found in these studies and performing a meta-analysis. This analysis reveals that the peaks and intervals for QTL using diploid and tetraploid populations co-localized on LG 1, suggesting that these are the same QTL. The same was seen on LG 3. Three meta-QTL were identified on LG 5, and two were discovered on LG 6. The meta-QTL on LG 1, MetaRRD1.1, had a confidence interval (CI) of 10.53 cM. On LG 3, MetaRRD3.1 had a CI of 5.94 cM. MetaRRD5.1 had a CI of 17.37 cM, MetaRRD5.2 had a CI of 4.33 cM, and MetaRRD5.3 had a CI of 21.95 cM. For LG 6, MetaRRD6.1 and MetaRRD6.2 had CIs of 9.81 and 8.81 cM, respectively. The analysis also led to the identification of potential disease resistance genes, with a primary interest in genes localized in meta-QTL intervals on LG 5 as this LG was found to explain the greatest proportion of phenotypic variance for RRD resistance. The results from this study may be used in the design of more robust marker-based selection tools to track and use a given QTL in a plant breeding context.
Open AccessMeta-Analysis of Rose Rosette Disease-Resistant Quantitative Trait Loci and a Search for Candidate Genes
Rose rosette disease (RRD), caused by the rose rosette emaravirus (RRV), is a major viral disease in roses (Rosa sp.) that threatens the rose industry. Recent studies have revealed quantitative trait loci (QTL) for reduced susceptibility to RRD in the linkage groups (LGs) 1, 5, 6, and 7 in tetraploid populations and the LGs 1, 3, 5, and 6 in diploid populations. In this study, we seek to better localize and understand the relationship between QTL identified in both diploid and tetraploid populations. We do so by remapping the populations found in these studies and performing a meta-analysis. This analysis reveals that the peaks and intervals for QTL using diploid and tetraploid populations co-localized on LG 1, suggesting that these are the same QTL. The same was seen on LG 3. Three meta-QTL were identified on LG 5, and two were discovered on LG 6. The meta-QTL on LG 1, MetaRRD1.1, had a confidence interval (CI) of 10.53 cM. On LG 3, MetaRRD3.1 had a CI of 5.94 cM. MetaRRD5.1 had a CI of 17.37 cM, MetaRRD5.2 had a CI of 4.33 cM, and MetaRRD5.3 had a CI of 21.95 cM. For LG 6, MetaRRD6.1 and MetaRRD6.2 had CIs of 9.81 and 8.81 cM, respectively. The analysis also led to the identification of potential disease resistance genes, with a primary interest in genes localized in meta-QTL intervals on LG 5 as this LG was found to explain the greatest proportion of phenotypic variance for RRD resistance. The results from this study may be used in the design of more robust marker-based selection tools to track and use a given QTL in a plant breeding context.
- Open Access
Field Resistance to Rose Rosette Disease as Determined by Multi-Year Evaluations in Tennessee and Delaware
Rose rosette disease (RRD) caused by the rose rosette emaravirus (RRV) and transmitted by the eriophyid mite Phyllocoptes fructiphilus (Pf), both native to North America, has caused significant damage to roses over the last several decades. As cultural and chemical control of this disease is difficult and expensive, a field trial was established to systematically screen rose germplasm for potential sources of resistance. One hundred and eight rose accessions representing the diversity of rose germplasm were planted in Tennessee and Delaware, managed to encourage disease development, and evaluated for symptom development and viral presence for three years. All major commercial rose cultivars were susceptible to this viral disease to varying levels. The rose accessions with no or few symptoms were species accessions from the sections Cinnamomeae, Carolinae, Bracteatae, and Systylae or hybrids with these. Among these, some were asymptomatic; they displayed no symptoms but were infected by the virus. Their potential depends on their ability to serve as a source of viruses. The next step is to understand the mechanism of resistance and genetic control of the various sources of resistance identified.
Open AccessField Resistance to Rose Rosette Disease as Determined by Multi-Year Evaluations in Tennessee and Delaware
Rose rosette disease (RRD) caused by the rose rosette emaravirus (RRV) and transmitted by the eriophyid mite Phyllocoptes fructiphilus (Pf), both native to North America, has caused significant damage to roses over the last several decades. As cultural and chemical control of this disease is difficult and expensive, a field trial was established to systematically screen rose germplasm for potential sources of resistance. One hundred and eight rose accessions representing the diversity of rose germplasm were planted in Tennessee and Delaware, managed to encourage disease development, and evaluated for symptom development and viral presence for three years. All major commercial rose cultivars were susceptible to this viral disease to varying levels. The rose accessions with no or few symptoms were species accessions from the sections Cinnamomeae, Carolinae, Bracteatae, and Systylae or hybrids with these. Among these, some were asymptomatic; they displayed no symptoms but were infected by the virus. Their potential depends on their ability to serve as a source of viruses. The next step is to understand the mechanism of resistance and genetic control of the various sources of resistance identified.
- Open Access
- 28 December 2022
- Published by Oxford University Press (OUP) in GigaScience
- Vol. 12
Developing best practices for genotyping-by-sequencing analysis in the construction of linkage maps
Background: Genotyping-by-sequencing (GBS) provides affordable methods for genotyping hundreds of individuals using millions of markers. However, this challenges bioinformatic procedures that must overcome possible artifacts such as the bias generated by polymerase chain reaction duplicates and sequencing errors. Genotyping errors lead to data that deviate from what is expected from regular meiosis. This, in turn, leads to difficulties in grouping and ordering markers, resulting in inflated and incorrect linkage maps. Therefore, genotyping errors can be easily detected by linkage map quality evaluations. Results: We developed and used the Reads2Map workflow to build linkage maps with simulated and empirical GBS data of diploid outcrossing populations. The workflows run GATK, Stacks, TASSEL, and Freebayes for single-nucleotide polymorphism calling and updog, polyRAD, and SuperMASSA for genotype calling, as well as OneMap and GUSMap to build linkage maps. Using simulated data, we observed which genotype call software fails in identifying common errors in GBS sequencing data and proposed specific filters to better handle them. We tested whether it is possible to overcome errors in a linkage map using genotype probabilities from each software or global error rates to estimate genetic distances with an updated version of OneMap. We also evaluated the impact of segregation distortion, contaminant samples, and haplotype-based multiallelic markers in the final linkage maps. Through our evaluations, we observed that some of the approaches produce different results depending on the dataset (dataset dependent) and others produce consistent advantageous results among them (dataset independent). Conclusions: We set as default in the Reads2Map workflows the approaches that showed to be dataset independent for GBS datasets according to our results. This reduces the number of required tests to identify optimal pipelines and parameters for other empirical datasets. Using Reads2Map, users can select the pipeline and parameters that best fit their data context. The Reads2MapApp shiny app provides a graphical representation of the results to facilitate their interpretation.
- 28 December 2022
- Published by Oxford University Press (OUP) in GigaScience
- Vol. 12
Open AccessDeveloping best practices for genotyping-by-sequencing analysis in the construction of linkage maps
Background: Genotyping-by-sequencing (GBS) provides affordable methods for genotyping hundreds of individuals using millions of markers. However, this challenges bioinformatic procedures that must overcome possible artifacts such as the bias generated by polymerase chain reaction duplicates and sequencing errors. Genotyping errors lead to data that deviate from what is expected from regular meiosis. This, in turn, leads to difficulties in grouping and ordering markers, resulting in inflated and incorrect linkage maps. Therefore, genotyping errors can be easily detected by linkage map quality evaluations. Results: We developed and used the Reads2Map workflow to build linkage maps with simulated and empirical GBS data of diploid outcrossing populations. The workflows run GATK, Stacks, TASSEL, and Freebayes for single-nucleotide polymorphism calling and updog, polyRAD, and SuperMASSA for genotype calling, as well as OneMap and GUSMap to build linkage maps. Using simulated data, we observed which genotype call software fails in identifying common errors in GBS sequencing data and proposed specific filters to better handle them. We tested whether it is possible to overcome errors in a linkage map using genotype probabilities from each software or global error rates to estimate genetic distances with an updated version of OneMap. We also evaluated the impact of segregation distortion, contaminant samples, and haplotype-based multiallelic markers in the final linkage maps. Through our evaluations, we observed that some of the approaches produce different results depending on the dataset (dataset dependent) and others produce consistent advantageous results among them (dataset independent). Conclusions: We set as default in the Reads2Map workflows the approaches that showed to be dataset independent for GBS datasets according to our results. This reduces the number of required tests to identify optimal pipelines and parameters for other empirical datasets. Using Reads2Map, users can select the pipeline and parameters that best fit their data context. The Reads2MapApp shiny app provides a graphical representation of the results to facilitate their interpretation.
- Open Access
Developing best practices for genotyping-by-sequencing analysis in the construction of linkage maps
Background: Genotyping-by-Sequencing (GBS) provides affordable methods for genotyping hundreds of individuals using millions of markers. However, this challenges bioinformatic procedures that must overcome possible artifacts such as the bias generated by PCR duplicates and sequencing errors. Genotyping errors lead to data that deviate from what is expected from regular meiosis. This, in turn, leads to difficulties in grouping and ordering markers resulting in inflated and incorrect linkage maps. Therefore, genotyping errors can be easily detected by linkage map quality evaluations. Results: We developed and used the Reads2Map workflow to build linkage maps with simulated and empirical GBS data of diploid outcrossing populations. The workflows run GATK, Stacks, TASSEL, and Freebayes for SNP calling and updog, polyRAD, and SuperMASSA for genotype calling, and OneMap and GUSMap to build linkage maps. Using simulated data, we observed which genotype call software fails in identifying common errors in GBS sequencing data and proposed specific filters to better handle them. We tested whether it is possible to overcome errors in a linkage map using genotype probabilities from each software or global error rates to estimate genetic distances with an updated version of OneMap. We also evaluated the impact of segregation distortion, contaminant samples, and haplotype-based multiallelic markers in the final linkage maps. Through our evaluations, we observed that some of the approaches produce different results depending on the dataset (dataset-dependent) and others produce consistent advantageous results among them (dataset-independent). Conclusions: We set as default in the Reads2Map workflows the approaches that showed to be dataset-independent for GBS datasets according to our results. This reduces the number required of tests to identify optimal pipelines and parameters for other empirical datasets. Using Reads2Map, users can select the pipeline and parameters that best fit their data context. The Reads2MapApp shiny app provides a graphical representation of the results to facilitate their interpretation.
Open AccessDeveloping best practices for genotyping-by-sequencing analysis in the construction of linkage maps
Background: Genotyping-by-Sequencing (GBS) provides affordable methods for genotyping hundreds of individuals using millions of markers. However, this challenges bioinformatic procedures that must overcome possible artifacts such as the bias generated by PCR duplicates and sequencing errors. Genotyping errors lead to data that deviate from what is expected from regular meiosis. This, in turn, leads to difficulties in grouping and ordering markers resulting in inflated and incorrect linkage maps. Therefore, genotyping errors can be easily detected by linkage map quality evaluations. Results: We developed and used the Reads2Map workflow to build linkage maps with simulated and empirical GBS data of diploid outcrossing populations. The workflows run GATK, Stacks, TASSEL, and Freebayes for SNP calling and updog, polyRAD, and SuperMASSA for genotype calling, and OneMap and GUSMap to build linkage maps. Using simulated data, we observed which genotype call software fails in identifying common errors in GBS sequencing data and proposed specific filters to better handle them. We tested whether it is possible to overcome errors in a linkage map using genotype probabilities from each software or global error rates to estimate genetic distances with an updated version of OneMap. We also evaluated the impact of segregation distortion, contaminant samples, and haplotype-based multiallelic markers in the final linkage maps. Through our evaluations, we observed that some of the approaches produce different results depending on the dataset (dataset-dependent) and others produce consistent advantageous results among them (dataset-independent). Conclusions: We set as default in the Reads2Map workflows the approaches that showed to be dataset-independent for GBS datasets according to our results. This reduces the number required of tests to identify optimal pipelines and parameters for other empirical datasets. Using Reads2Map, users can select the pipeline and parameters that best fit their data context. The Reads2MapApp shiny app provides a graphical representation of the results to facilitate their interpretation.
- Open Access
- 7 July 2022
- Published by Frontiers Media SA in Frontiers in Plant Science
- Vol. 13, 916231
Rose Rosette Disease Resistance Loci Detected in Two Interconnected Tetraploid Garden Rose Populations
Rose rosette disease (RRD), caused by the Rose rosette emaravirus (RRV), is a major threat to the garden rose industry in the United States. There has been limited work on the genetics of host plant resistance to RRV. Two interconnected tetraploid garden rose F1 biparental mapping populations were created to develop high-quality tetraploid rose linkage maps that allowed the discovery of RRD resistance quantitative trait loci (QTLs) on linkage groups (LGs) 5, 6, and 7. These QTLs individually accounted for around 18–40% of the phenotypic variance. The locus with the greatest effect on partial resistance was found in LG 5. Most individuals with the LG 5 QTL were in the simplex configuration; however, two individuals were duplex (likely due to double reduction). Identification of resistant individuals and regions of interest can help the development of diagnostic markers for marker-assisted selection in a breeding program.
- 7 July 2022
- Published by Frontiers Media SA in Frontiers in Plant Science
- Vol. 13, 916231
Open AccessRose Rosette Disease Resistance Loci Detected in Two Interconnected Tetraploid Garden Rose Populations
Rose rosette disease (RRD), caused by the Rose rosette emaravirus (RRV), is a major threat to the garden rose industry in the United States. There has been limited work on the genetics of host plant resistance to RRV. Two interconnected tetraploid garden rose F1 biparental mapping populations were created to develop high-quality tetraploid rose linkage maps that allowed the discovery of RRD resistance quantitative trait loci (QTLs) on linkage groups (LGs) 5, 6, and 7. These QTLs individually accounted for around 18–40% of the phenotypic variance. The locus with the greatest effect on partial resistance was found in LG 5. Most individuals with the LG 5 QTL were in the simplex configuration; however, two individuals were duplex (likely due to double reduction). Identification of resistant individuals and regions of interest can help the development of diagnostic markers for marker-assisted selection in a breeding program.
- Open Access
- 9 June 2022
- Published by The Open Journal in Journal of Open Source Software
- Vol. 7 (74) , 4242
VIEWpoly: a visualization tool to integrate and explore results of polyploid genetic analysis
- 9 June 2022
- Published by The Open Journal in Journal of Open Source Software
- Vol. 7 (74) , 4242
Open AccessVIEWpoly: a visualization tool to integrate and explore results of polyploid genetic analysis
- Open Access
Identification of QTLs for Reduced Susceptibility to Rose Rosette Disease in Diploid Roses
Resistance to rose rosette disease (RRD), a fatal disease of roses (Rosa spp.), is a high priority for rose breeding. As RRD resistance is time-consuming to phenotype, the identification of genetic markers for resistance could expedite breeding efforts. However, little is known about the genetics of RRD resistance. Therefore, we performed a quantitative trait locus (QTL) analysis on a set of inter-related diploid rose populations phenotyped for RRD resistance and identified four QTLs. Two QTLs were found in multiple years. The most consistent QTL is qRRV_TX2WSE_ch5, which explains approximately 20% and 40% of the phenotypic variation in virus quantity and severity of RRD symptoms, respectively. The second, a QTL on chromosome 1, qRRD_TX2WSE_ch1, accounts for approximately 16% of the phenotypic variation for severity. Finally, a third QTL on chromosome 3 was identified only in the multiyear analysis, and a fourth on chromosome 6 was identified in data from one year only. In addition, haplotypes associated with significant changes in virus quantity and severity were identified for qRRV_TX2WSE_ch5 and qRRD_TX2WSE_ch1. This research represents the first report of genetic determinants of resistance to RRD. In addition, marker trait associations discovered here will enable better parental selection when breeding for RRD resistance and pave the way for marker-assisted selection for RRD resistance.
Open AccessIdentification of QTLs for Reduced Susceptibility to Rose Rosette Disease in Diploid Roses
Resistance to rose rosette disease (RRD), a fatal disease of roses (Rosa spp.), is a high priority for rose breeding. As RRD resistance is time-consuming to phenotype, the identification of genetic markers for resistance could expedite breeding efforts. However, little is known about the genetics of RRD resistance. Therefore, we performed a quantitative trait locus (QTL) analysis on a set of inter-related diploid rose populations phenotyped for RRD resistance and identified four QTLs. Two QTLs were found in multiple years. The most consistent QTL is qRRV_TX2WSE_ch5, which explains approximately 20% and 40% of the phenotypic variation in virus quantity and severity of RRD symptoms, respectively. The second, a QTL on chromosome 1, qRRD_TX2WSE_ch1, accounts for approximately 16% of the phenotypic variation for severity. Finally, a third QTL on chromosome 3 was identified only in the multiyear analysis, and a fourth on chromosome 6 was identified in data from one year only. In addition, haplotypes associated with significant changes in virus quantity and severity were identified for qRRV_TX2WSE_ch5 and qRRD_TX2WSE_ch1. This research represents the first report of genetic determinants of resistance to RRD. In addition, marker trait associations discovered here will enable better parental selection when breeding for RRD resistance and pave the way for marker-assisted selection for RRD resistance.
- 10 October 2020
- Published by The R Foundation
mappoly: Genetic Linkage Maps in Autopolyploids