YSYeshan Sheng

Yeshan Sheng

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yeshan Sheng has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Experimental Study on the Microfabrication and Mechanical Properties of Freeze–Thaw Fractured Sandstone under Cyclic Loading and Unloading Effects

    by Taoying Liu, Wenbin Cai, Yeshan Sheng, Jun Huang

    A series of freeze–thaw cycling tests, as well as cyclic loading and unloading tests, have been conducted on nodular sandstones to investigate the effect of fatigue loading and freeze–thaw cycling on the damage evolution of fractured sandstones based on damage mechanics theory, the microstructure and sandstone pore fractal theory. The results show that the number of freeze–thaw cycles, the cyclic loading level, the pore distribution and the complex program are important factors affecting the damage evolution of rocks. As the number of freeze–thaw cycles rises, the peak strength, modulus of elasticity, modulus of deformation and damping ratio of the sandstone all declined. Additionally, the modulus of elasticity and deformation increase nonlinearly as the cyclic load level rises. With the rate of increase decreasing, while the dissipation energy due to hysteresis increases gradually and at an increasing rate, and the damping ratio as a whole shows a gradual decrease, with a tendency to increase at a later stage. The NRM (Nuclear Magnetic Resonance) demonstrated that the total porosity and micro-pores of the sandstone increased linearly with the number of freeze–thaw cycles and that the micro-porosity was more sensitive to freeze–thaw, gradually shifting towards meso-pores and macro-pores; simultaneously, the SEM (Scanning Electron Microscope) indicated that the more freeze–thaw cycles there are, the more micro-fractures and holes grow and penetrate each other and the more loose the structure is, with an overall nest-like appearance. To explore the mechanical behavior and mechanism of cracked rock in high-altitude and alpine areas, a damage model under the coupling of freeze–thaw-fatigue loading was established based on the loading and unloading response ratio theory and strain equivalence principle.


  • Open Access

    Experimental Study on Energy Evolution and Acoustic Emission Characteristics of Fractured Sandstone under Cyclic Loading and Unloading

    by Xuebin Xie, Kangshuai Sun, Yeshan Sheng

    To investigate the dynamic response of fractured rock under cyclic loading and unloading, a WHY-300/10 microcomputer-controlled electro-hydraulic servo universal testing machine was used to conduct uniaxial cyclic loading and unloading tests. Simultaneously, acoustic emission (AE) and a CCD high-speed camera were employed to monitor the fracturing characteristics of sandstone. The mechanical properties, energy evolution, AE characteristics, and deformation of 45° sandstone were analyzed. The results indicate that as the load cycle level increases, both the elastic modulus and deformation modulus exhibit a “parabolic” increase, with a rapid rise initially and a slower rate of increase later. The damping ratio generally shows a decreasing trend but tends to rise near the peak load. The total energy, elastic energy, dissipated energy, damping energy, and damage energy all follow exponential function increases with the load level. The b-value fluctuates significantly during the stable crack propagation phase, unstable crack propagation phase, and peak phase. When the FR (Felicity ratio > 1), the rock is relatively stable; when the FR (Felicity ratio < 1), the rock gradually extends towards an unstable state. The Felicity ratio can be used as a predictive tool for the precursors of rock failure. Shear fractures dominate during the compaction and peak phases, while tensile fractures dominate during the crack propagation phase, ultimately leading to a failure characterized by tensile fracture. High-speed camera observations revealed that deformation first occurs at the tips of the prefabricated cracks and gradually spreads and deflects toward the ends of the sandstone. This study provides theoretical support for exploring the mechanical behavior and mechanisms of fractured rock under cyclic loading and unloading, and it has significant practical implications.


  • Open Access

    Fracture and Damage Evolution of Multiple-Fractured Rock-like Material Subjected to Compression

    by Taoying Liu, Mengyuan Cui, Qing Li, Shan Yang, Zhanfu Yu, Yeshan Sheng, Ping Cao, Keping Zhou

    Multiple compression tests on rock-like samples of pre-existing cracks with different geometries were conducted to investigate the strength properties and crack propagation behavior considering multi-crack interactions. The progressive failure process of the specimens was segmented into four categories and seven coalescence modes were identified due to different crack propagation mechanisms. Ultimately, a mechanical model of the multi-crack rock mass was proposed to investigate the gradual fracture and damage evolution traits of the multi-crack rock on the basis of exploring the law of the compression-shear wing crack initiation and propagation. A comparison between theory and experimental results indicated that the peak strength of the specimens with multiple fractures decreased initially and subsequently increased with the increase in the fissure inclination angles; the peak strength of specimens decreased with the increase in the density of fissure distribution.


  • Open Access

    Hydraulic Fracture Propagation in Fractured Rock Mass

    by Taoying Liu, Yeshan Sheng, Qing Li, Chaoyang Zhang, Mengyuan Cui, Zhanfu Yu, Ping Cao

    According to fracture mechanics theory, the initial cracking law and wing crack propagation model of compression shear rock cracks subjected to hydraulic pressure and far field stresses are discussed. The results of the theoretical study show that crack initiation strength is inversely related to hydraulic pressure, that hydraulic pressure aggravates the wing crack’s growth, and that the wing crack’s behavior under high hydraulic pressure shifts from stable to unstable expansion. The confining pressure is proportional to the rock mass strength, the wing crack’s stress intensity factor drops as the remote field stress σ3 increases, and the wing crack tends to expand stably. As the crack angle increases, the cracking strength reduces at first, then increases. At the same time, damage fracture mechanics models are established for the occurrence of wing crack-wing crack failure, wing crack-shear crack failure, wing crack-shear crack-wing crack failure, and shear crack-shear crack failure in the compression-shear crack bridge under far-field stress and hydraulic pressure. The link between hydraulic pressure, confining pressure, fracture angle, stress intensity factor, and compression-shear factor λ12 is also clarified. The value of the stress intensity factor increases when the hydraulic pressure decreases, the confining pressure increases, and the crack angle increases, whereas the compression-shear factor decreases. This study lays the groundwork for a quantitative assessment of fractured rock mass destruction under hydraulic pressure.