CBCuong Mai Bui

Cuong Mai Bui

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Cuong Mai Bui has a total of 25 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Influence of Fluid Rheology on Fluid Flow in a Natural Fracture Network

    by Cuong Mai Bui, Stephan K. Matthai

    Non-Newtonian rheology is widely acknowledged in subsurface fluids, yet its presence and effects are largely ignored in current fracture-flow studies. Here, we simulate fracture flow of non-Newtonian polymer solutions on a several metre-wide millimetre-aperture network of fractures, examining the complex interplay between fluid rheology, fracture geometry, and fluid inertia. Non-Newtonian fluid characteristics, including a yield stress and shear-thinning behaviour, are modelled using the Herschel-Bulkley-Papanastasiou approach. For the investigated flow rates, our Navier-Stokes simulations reveal significant viscosity variations, resulting in complex flow patterns at both aperture- and network scale. At low rates, non-yielded fluid forms rigid zones occupying up to ~65% of the network cross-sectional area, reducing fracture flow connectivity. At high rates, shear-thinning promotes inertia-dominated flow with circulations near fracture intersections. Regarding flow partitioning, yield stress confines flow to dominant pathways while shear-thinning promotes a broader fluid distribution as compared with a Newtonian fluid. Observed multimodal velocity distributions and nonlinear pressure drop-flow rate relationships underscore that fluid rheology must be considered during fracture-flow modelling.

  • Open Access

    Influence of fluid dynamics on flow and transport in natural fracture networks

    by Cuong Mai Bui, Stephan K. Matthai

    The flow velocity in metre-scale natural fracture networks readily exceeds centimetres per second, the threshold for non-stationary flow. However, despite widespread evidence of such dynamics, these are rarely considered in subsurface engineering applications, where steady-state simulation approaches dominate. Here, we compare Reynolds-averaged Navier-Stokes (RANS) and Detached-Eddy Simulation (DES) methods for the transient Navier-Stokes equation applied to fracture flow. These models are validated with experimental data of flow through fracture intersections. DES is then applied to a metre-scale fracture pattern with hundreds of discrete fractures, examining flow dynamics at velocities up to metres per second (m/s). DES accurately captures the temporal flow fluctuation and multiscale eddy formation, especially when a fine computational mesh is used in wake regions. By contrast, unsteady RANS fails to capture flow-field variations and produces results similar to steady RANS. DES reveals significant network flow periodicity ( $$\sim $$ ∼ 40 Hz) at m/s velocities, unlike the low-frequency results ( $$\sim $$ ∼ 0.4 Hz) from RANS. We also explore the impact of unsteady flow on particle transport by integrating mixture-multiphase and rheological models into DES. Corresponding results indicate that inertia alters the concentration of transported solids, mixture viscosity, and particle dynamics such as clustering.


  • Open Access

    Viscoplastic effects on a non-Newtonian fluid flow in rock fracture

    by Quang Du Nguyen, Duy Vu Luu, Xuan Bao Nguyen, Cuong Mai Bui

    Viscoplastic non-Newtonian fluid flow in rock fractures is critical for subsurface applications but remains understudied. In this work, the flow of Bingham plastic fluids in a single rough fracture is simulated and analyzed in detail. For this purpose, the yield stress rheology of kaolinite suspensions at concentrations of 20 and 28.5 wt. % is modeled using the Bingham–Papanastasiou framework. Simulations are carried out over a broad range of incoming velocities (i.e., u0 = 0.001–2 m s−1), covering flow regimes from negligible to strong inertia effects. The results reveal that the yield stress effect creates rigid zones, either moving with the flow or attached to the fracture surface, while increasing the effective viscosity and, therefore, stabilizing the fracture flow. At high flow velocities, this effect diminishes, reducing the area of rigid zones and promoting nonlinear features such as the manifestation of multi-scale eddies. Flow tortuosity increases with the incoming velocity but decreases with yield stress, reflecting the stabilizing influence of viscoplasticity. The total pressure drop demonstrates non-Darcy behavior for both Newtonian and yield stress fluids, driven by the combined effects of fracture roughness and yield stress. Forchheimer’s equation effectively predicts the pressure drop across the fracture, capturing nonlinear contributions.


  • Open Access

    Flow Behaviors of Polymer Solution in a Lid-Driven Cavity

    by Cuong Mai Bui, Anh-Ngoc Tran Ho, Xuan Bao Nguyen

    In this work, a numerical study of polymer flow behaviors in a lid-driven cavity, which is inspired by the coating process, at a broad range of Oldroyd numbers (0≤Od≤50), is carried out. The Reynolds number is height-based and kept at Re=0.001. The fluid investigated is of Carbopol gel possessing yield stress and shear-thinning properties. To express rheological characteristics, the Herschel–Bulkley model cooperated with Papanastasiou’s regularization scheme is utilized. Results show that the polymer flow characteristics, i.e., velocity, viscosity, and vortex distributions, are considerably influenced by viscoplastic behaviors. Additionally, there exist solid-like regions which can be of either moving rigid or static dead types in the flow patterns; they become greater and tend to merge together to construct larger ones when Od increases. Furthermore, various polymer flow aspects in different cavity configurations are discussed and analyzed; the cavity width/aspect ratio and skewed angle are found to have significant impacts on the vortex structures and the formation of solid-like regions. Moreover, results for the critical aspect ratio at which the static dead zone is broken into two parts and the characteristic height of this zone are also reported in detail.


  • Numerical Study of Ultraviolet Germicidal Effect Against SARS-CoV-2 Virus

    by Nguyen Duy Minh Phan, Ngo Quoc Huy Tran, Le Anh Doan, Quang Truong Vo, Duy Chung Tran, Thi Thanh Vi Nguyen, Van Sanh Huynh, Tran Anh Ngoc Ho, Duc Long Nguyen, Cuong Mai Bui

  • Open Access

    Singularity-Free Adaptive Controller for Uncertain Hysteresis Suspension Using Magnetorheological Elastomer-Based Absorber

    by Hoa Thi Truong, Xuan Bao Nguyen, Cuong Mai Bui

    The magnetorheological elastomer (MRE) is a smart material widely used in recent vibration systems. A system using these materials often faces difficulties designing the controller such as unknown parameters, hysteresis state, and input constraints. First, a model is designed for the MRE-based absorber to portray the behavior of MRE and predict the appropriate electric current supplied. The conventional adaptive controller often suffers from so-called control singularities. The singularity-free adaptive controller is proposed to eliminate the singularity with parametric uncertainty. The proposed controller consists of four components: an adaptive linearizing controller, a deputy adaptive neural network controller, an auxiliary part designed for the controller to overcome the input constraint problem, and a smooth switching algorithm used to exchange the takeover rights of the two controllers. Moreover, the controller is designed to obtain the stabilization of hysteretic state estimation for the vibration system. The adaptive algorithms are proposed to update the unknown system parameters and to observe the unmeasurable hysteretic state. Meanwhile, closed-loop system stability is comprehensively assessed. Finally, the simulation performed on a quarter-car suspension with an MRE-based absorber shows the proposed controller's efficiency.