Maxime Berthe
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Maxime Berthe has a total of 105 co-authors. Here are the top co-authors by number of shared publications:
- Bruno Grandidier
Université De Lille CNRS Centrale Lille Université Polytechnique Hauts‐De‐France Junia‐ISEN, UMR 8520 ‐ IEMN Lille France
9 shared publications - Ludovic Desplanque
IEMN, IEMN, Avenue Poincaré, CS60069, Villeneuve-d'Ascq, 59655, FRANCE
6 shared publications - Louis Biadala
Université de Lille, CNRS, Centrale Lille
4 shared publications - Xavier Wallart
Université de Lille, CNRS, Centrale Lille, Univ. Polytechnique Hauts-de-France, Junia-ISEN, UMR 8520 – IEMN, Lille, France
3 shared publications C Barbot
IEMN, Avenue Poincaré - CS 60069, Villeneuve-d'Ascq, Nord, 59652, FRANCE
2 shared publicationsC Coinon
IEMN, IEMN, Avenue Poincaré, CS60069, Villeneuve-d'Ascq, Hauts-de-France, 59655, FRANCE
2 shared publications
Latest Publications
Nanoscale Evidence of Junction‐Limited Transport in Ti 3 C 2 T x MXene
Understanding charge transport in networks of 2D crystals is essential for developing reliable applications such as chemiresistors or electromagnetic shields. For this purpose, intra‐ and inter‐flake contributions to the network resistance must be disentangled. MXenes such as Ti 3 C 2 T x , are prime examples of 2D crystals often employed as thin networks of interconnected flakes for functional devices. While a significant number of studies focused on transport in individual MXene flakes, inter‐flake transport remains scarcely explored. Here, we demonstrate that charge transport in multi‐flake conductive paths of Ti 3 C 2 T x is dominated by interflake junctions and provide quantitative estimates of junction resistances. Scanning probe measurements reveal that in a MXene multi‐flake conductive path, individual flakes behave as isopotential domains, since the voltage drop is localized precisely at inter‐flake junctions. The chemiresistive response to humidity is further investigated at the single flake, multi‐flake and flake network scale, evidencing the crucial impact of junctions on sensing kinetics. These findings underline the dominant role of inter‐flake junctions in MXene charge transport and sensing capabilities.
Nanoscale Evidence of Junction‐Limited Transport in Ti 3 C 2 T x MXene
Understanding charge transport in networks of 2D crystals is essential for developing reliable applications such as chemiresistors or electromagnetic shields. For this purpose, intra‐ and inter‐flake contributions to the network resistance must be disentangled. MXenes such as Ti 3 C 2 T x , are prime examples of 2D crystals often employed as thin networks of interconnected flakes for functional devices. While a significant number of studies focused on transport in individual MXene flakes, inter‐flake transport remains scarcely explored. Here, we demonstrate that charge transport in multi‐flake conductive paths of Ti 3 C 2 T x is dominated by interflake junctions and provide quantitative estimates of junction resistances. Scanning probe measurements reveal that in a MXene multi‐flake conductive path, individual flakes behave as isopotential domains, since the voltage drop is localized precisely at inter‐flake junctions. The chemiresistive response to humidity is further investigated at the single flake, multi‐flake and flake network scale, evidencing the crucial impact of junctions on sensing kinetics. These findings underline the dominant role of inter‐flake junctions in MXene charge transport and sensing capabilities.
- 24 January 2025
- Published by IOP Publishing in Nanotechnology
- Vol. 36 (12) , 125301
Selective area molecular beam epitaxy of InSb on InP(111)B: from thin films to quantum nanostructures
InSb is a material of choice for infrared as well as spintronic devices but its integration on large lattice mismatched semi-insulating III–V substrates has so far altered its exceptional properties. Here, we investigate the direct growth of InSb on InP(111)B substrates with molecular beam epitaxy. Despite the lack of a thick metamorphic buffer layer for accommodation, we show that quasi-continuous thin films can be grown using a very high Sb/In flux ratio. The quality of the films is further studied with Hall measurements on large-scale devices to assess the impact of the InSb surface and InSb/InP interface on the electronic properties. Taking advantage of the optimized growth conditions for the formation of thin films, the selective area molecular beam epitaxial growth of nanostructures is subsequently investigated. Based on cross-sectional transmission electron microscopy and scanning near-field optical microscopy in the middle-wave infrared, ultra-thin and very long in-plane InSb nanowires as well as more complex nanostructures such as nano-rings and crosses are achieved with a good structural quality.
- 24 January 2025
- Published by IOP Publishing in Nanotechnology
- Vol. 36 (12) , 125301
Selective area molecular beam epitaxy of InSb on InP(111)B: from thin films to quantum nanostructures
InSb is a material of choice for infrared as well as spintronic devices but its integration on large lattice mismatched semi-insulating III–V substrates has so far altered its exceptional properties. Here, we investigate the direct growth of InSb on InP(111)B substrates with molecular beam epitaxy. Despite the lack of a thick metamorphic buffer layer for accommodation, we show that quasi-continuous thin films can be grown using a very high Sb/In flux ratio. The quality of the films is further studied with Hall measurements on large-scale devices to assess the impact of the InSb surface and InSb/InP interface on the electronic properties. Taking advantage of the optimized growth conditions for the formation of thin films, the selective area molecular beam epitaxial growth of nanostructures is subsequently investigated. Based on cross-sectional transmission electron microscopy and scanning near-field optical microscopy in the middle-wave infrared, ultra-thin and very long in-plane InSb nanowires as well as more complex nanostructures such as nano-rings and crosses are achieved with a good structural quality.
- 8 October 2024
- Published by IOP Publishing in Nanotechnology
- Vol. 35 (50) , 505602
Selective area epitaxy of in-plane HgTe nanostructures on CdTe(001) substrate
Semiconductor nanowires (NWs) are believed to play a crucial role for future applications in electronics, spintronics and quantum technologies. A potential candidate is HgTe but its sensitivity to nanofabrication processes restrain its development. A way to circumvent this obstacle is the selective area growth technique. Here, in-plane HgTe nanostructures are grown thanks to selective area molecular beam epitaxy on a semi-insulating CdTe substrate covered with a patterned SiO2 mask. The shape of these nanostructures is defined by the in-plane orientation of the mask aperture along the , 1 ¯ 0>, or direction, the deposited thickness, and the growth temperature (GT). Several micron long in-plane NWs can be achieved as well as more complex nanostructures such as networks, diamond structures or rings. A good selectivity is achieved with very little parasitic growth on the mask even for a GT as low as 140 °C and growth rate up to 0.5 monolayer per second. For oriented NWs, the center of the nanostructure exhibits a trapezoidal shape with {111}B facets and two grains on the sides, while 1 ¯ 0> oriented NWs show {111}A facets with adatoms accumulation on the sides of the top surface. Transmission electron microscopy observations reveal a continuous epitaxial relation between the CdTe substrate and the HgTe NW. Measurements of the resistance with four-point scanning tunneling microscopy indicates a good electrical homogeneity along the main NW axis and a thermally activated transport. This growth method paves the way toward the fabrication of complex HgTe-based nanostructures for electronic transport measurements.
- 8 October 2024
- Published by IOP Publishing in Nanotechnology
- Vol. 35 (50) , 505602
Selective area epitaxy of in-plane HgTe nanostructures on CdTe(001) substrate
Semiconductor nanowires (NWs) are believed to play a crucial role for future applications in electronics, spintronics and quantum technologies. A potential candidate is HgTe but its sensitivity to nanofabrication processes restrain its development. A way to circumvent this obstacle is the selective area growth technique. Here, in-plane HgTe nanostructures are grown thanks to selective area molecular beam epitaxy on a semi-insulating CdTe substrate covered with a patterned SiO2 mask. The shape of these nanostructures is defined by the in-plane orientation of the mask aperture along the , 1 ¯ 0>, or direction, the deposited thickness, and the growth temperature (GT). Several micron long in-plane NWs can be achieved as well as more complex nanostructures such as networks, diamond structures or rings. A good selectivity is achieved with very little parasitic growth on the mask even for a GT as low as 140 °C and growth rate up to 0.5 monolayer per second. For oriented NWs, the center of the nanostructure exhibits a trapezoidal shape with {111}B facets and two grains on the sides, while 1 ¯ 0> oriented NWs show {111}A facets with adatoms accumulation on the sides of the top surface. Transmission electron microscopy observations reveal a continuous epitaxial relation between the CdTe substrate and the HgTe NW. Measurements of the resistance with four-point scanning tunneling microscopy indicates a good electrical homogeneity along the main NW axis and a thermally activated transport. This growth method paves the way toward the fabrication of complex HgTe-based nanostructures for electronic transport measurements.
- 15 July 2024
- Published by IOP Publishing in Nanotechnology
- Vol. 35 (39) , 395302
InGaAs quantum dot chains grown by twofold selective area molecular beam epitaxy
Increasing quantum confinement in semiconductor quantum dot (QD) systems is essential to perform robust simulations of many-body physics. By combining molecular beam epitaxy and lithographic techniques, we developed an approach consisting of a twofold selective area growth to build QD chains. Starting from 15 nm-thick and 65 nm-wide in-plane In0.53Ga0.47As nanowires on InP substrates, linear arrays of In0.53Ga0.47As QDs were grown on top, with tunable lengths and separations. Kelvin probe force microscopy performed at room temperature revealed a change of quantum confinement in chains with decreasing QD sizes, which was further emphasized by the spectral shift of quantum levels resolved in the conduction band with low temperature scanning tunneling spectroscopy. This approach, which allows the controlled formation of 25 nm-thick QDs with a minimum length and separation of 30 nm and 22 nm respectively, is suitable for the construction of scalable fermionic quantum lattices.
- 15 July 2024
- Published by IOP Publishing in Nanotechnology
- Vol. 35 (39) , 395302
InGaAs quantum dot chains grown by twofold selective area molecular beam epitaxy
Increasing quantum confinement in semiconductor quantum dot (QD) systems is essential to perform robust simulations of many-body physics. By combining molecular beam epitaxy and lithographic techniques, we developed an approach consisting of a twofold selective area growth to build QD chains. Starting from 15 nm-thick and 65 nm-wide in-plane In0.53Ga0.47As nanowires on InP substrates, linear arrays of In0.53Ga0.47As QDs were grown on top, with tunable lengths and separations. Kelvin probe force microscopy performed at room temperature revealed a change of quantum confinement in chains with decreasing QD sizes, which was further emphasized by the spectral shift of quantum levels resolved in the conduction band with low temperature scanning tunneling spectroscopy. This approach, which allows the controlled formation of 25 nm-thick QDs with a minimum length and separation of 30 nm and 22 nm respectively, is suitable for the construction of scalable fermionic quantum lattices.
- Open Access
- 1 December 2023
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 94 (12)
Ultrahigh vacuum Raman spectroscopy for the preparation of III–V semiconductor surfaces
Raman spectroscopy is well-suited for the characterization of semiconductor materials. However, due the weakness of the Raman signal, the studies of thin semiconductor layers in complex environments, such as ultrahigh vacuum, are rather scarce. Here, we have designed a Raman apparatus based on the use of a fiber optic probe, with a lens collecting the backscattered light directly inserted in ultrahigh vacuum. The solution has been tested for the preparation of III–V semiconductor surfaces, which requires the recovery of their atomic reconstruction. The surfaces were either protected with a thin As amorphous layer or covered with a native oxide prior to their treatment. The analysis of the Raman spectra, which was correlated with the study of the surfaces with low temperature scanning tunneling microscopy at the end of the cleaning process, shows the high potential of Raman spectroscopy for monitoring the cleanliness of III–V semiconductor heterostructures in situ.
- 1 December 2023
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 94 (12)
Open AccessUltrahigh vacuum Raman spectroscopy for the preparation of III–V semiconductor surfaces
Raman spectroscopy is well-suited for the characterization of semiconductor materials. However, due the weakness of the Raman signal, the studies of thin semiconductor layers in complex environments, such as ultrahigh vacuum, are rather scarce. Here, we have designed a Raman apparatus based on the use of a fiber optic probe, with a lens collecting the backscattered light directly inserted in ultrahigh vacuum. The solution has been tested for the preparation of III–V semiconductor surfaces, which requires the recovery of their atomic reconstruction. The surfaces were either protected with a thin As amorphous layer or covered with a native oxide prior to their treatment. The analysis of the Raman spectra, which was correlated with the study of the surfaces with low temperature scanning tunneling microscopy at the end of the cleaning process, shows the high potential of Raman spectroscopy for monitoring the cleanliness of III–V semiconductor heterostructures in situ.
- Open Access
- 2 October 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 134 (13)
Highly conductive tungsten suboxide nanotubes
We demonstrate a high electron conductivity (>102 S/cm and up to 103 S/cm) of tungsten suboxide W18O52.4−52.9 (or equivalently WO2.91−2.94) nanotubes (2–3 nm in diameter, ∼μm long). The conductivity is measured in the temperature range of 120–300 K by a four-probe scanning tunneling microscope in ultrahigh vacuum. The nanotubes are synthesized by a low-temperature and low-cost solvothermal method. They self-assemble in bundles of hundreds of nanotubes forming nanowires (∼μm long, few tens nm wide). We observe a large anisotropy of the conductivity with a ratio (longitudinal conductivity/perpendicular conductivity) of ∼105. A large fraction of them (∼65%–95%) shows a metallic-like, thermal activation-less electron transport behavior. Few of them, with a lower conductivity from 10 to 102 S/cm, display a variable range hopping behavior. In this latter case, a hopping barrier energy of ∼0.24 eV is inferred in agreement with the calculated energy level of the oxygen vacancy below the conduction band. This result is in agreement with a relative average concentration of oxygen vacancies of ∼3%, for which a semiconductor-to-metal transition was theoretically predicted. These tungsten suboxide nanostructures are prone to a wide range of applications in nanoelectronics.
- 2 October 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 134 (13)
Open AccessHighly conductive tungsten suboxide nanotubes
We demonstrate a high electron conductivity (>102 S/cm and up to 103 S/cm) of tungsten suboxide W18O52.4−52.9 (or equivalently WO2.91−2.94) nanotubes (2–3 nm in diameter, ∼μm long). The conductivity is measured in the temperature range of 120–300 K by a four-probe scanning tunneling microscope in ultrahigh vacuum. The nanotubes are synthesized by a low-temperature and low-cost solvothermal method. They self-assemble in bundles of hundreds of nanotubes forming nanowires (∼μm long, few tens nm wide). We observe a large anisotropy of the conductivity with a ratio (longitudinal conductivity/perpendicular conductivity) of ∼105. A large fraction of them (∼65%–95%) shows a metallic-like, thermal activation-less electron transport behavior. Few of them, with a lower conductivity from 10 to 102 S/cm, display a variable range hopping behavior. In this latter case, a hopping barrier energy of ∼0.24 eV is inferred in agreement with the calculated energy level of the oxygen vacancy below the conduction band. This result is in agreement with a relative average concentration of oxygen vacancies of ∼3%, for which a semiconductor-to-metal transition was theoretically predicted. These tungsten suboxide nanostructures are prone to a wide range of applications in nanoelectronics.
- 12 April 2023
- Published by IOP Publishing in Nanotechnology
- Vol. 34 (26) , 265704
Improving the intrinsic conductance of selective area grown in-plane InAs nanowires with a GaSb shell
The nanoscale intrinsic electrical properties of in-plane InAs nanowires grown by selective area epitaxy are investigated using a process-free method involving a multi-probe scanning tunneling microscope. The resistance of oxide-free InAs nanowires grown on an InP(111)B substrate and the resistance of InAs/GaSb core–shell nanowires grown on an InP(001) substrate are measured using a collinear four-point probe arrangement in ultrahigh vacuum. They are compared with the resistance of two-dimensional electron gas reference samples measured using the same method and with the Van der Pauw geometry for validation. A significant improvement of the conductance is achieved when the InAs nanowires are fully embedded in GaSb, exhibiting an intrinsic sheet conductance close to the one of the quantum well counterpart.
- 12 April 2023
- Published by IOP Publishing in Nanotechnology
- Vol. 34 (26) , 265704
Improving the intrinsic conductance of selective area grown in-plane InAs nanowires with a GaSb shell
The nanoscale intrinsic electrical properties of in-plane InAs nanowires grown by selective area epitaxy are investigated using a process-free method involving a multi-probe scanning tunneling microscope. The resistance of oxide-free InAs nanowires grown on an InP(111)B substrate and the resistance of InAs/GaSb core–shell nanowires grown on an InP(001) substrate are measured using a collinear four-point probe arrangement in ultrahigh vacuum. They are compared with the resistance of two-dimensional electron gas reference samples measured using the same method and with the Van der Pauw geometry for validation. A significant improvement of the conductance is achieved when the InAs nanowires are fully embedded in GaSb, exhibiting an intrinsic sheet conductance close to the one of the quantum well counterpart.
- 7 November 2022
- Published by AIP Publishing in Applied Physics Letters
- Vol. 121 (19) , 192104
Direct measurement of band offsets on selective area grown In0.53Ga0.47As/InP heterojunction with multiple probe scanning tunneling microscopy
The knowledge of the band alignment in semiconductor heterostructures is crucial, as it governs carrier confinement with many impacts on the performances of devices. By controlling the direction of the current flow in in-plane In0.53Ga0.47As/InP heterostructure nanowires, either horizontally along the nanowires or vertically into the InP substrate with low temperature multiple-probe tunneling spectroscopy, a direct measurement of the band offsets at the buried In0.53Ga0.47As/InP heterointerface is performed. Despite the unavoidable processing steps involved in selective area epitaxy, conduction and valence band offsets of 0.21 ± 0.01 and 0.40 ± 0.01 eV are, respectively, found, indicating the formation of an interface with a quality comparable to two-dimensional In0.53Ga0.47As/InP heterostructures.
- 7 November 2022
- Published by AIP Publishing in Applied Physics Letters
- Vol. 121 (19) , 192104
Direct measurement of band offsets on selective area grown In0.53Ga0.47As/InP heterojunction with multiple probe scanning tunneling microscopy
The knowledge of the band alignment in semiconductor heterostructures is crucial, as it governs carrier confinement with many impacts on the performances of devices. By controlling the direction of the current flow in in-plane In0.53Ga0.47As/InP heterostructure nanowires, either horizontally along the nanowires or vertically into the InP substrate with low temperature multiple-probe tunneling spectroscopy, a direct measurement of the band offsets at the buried In0.53Ga0.47As/InP heterointerface is performed. Despite the unavoidable processing steps involved in selective area epitaxy, conduction and valence band offsets of 0.21 ± 0.01 and 0.40 ± 0.01 eV are, respectively, found, indicating the formation of an interface with a quality comparable to two-dimensional In0.53Ga0.47As/InP heterostructures.
- 20 June 2022
- Published by IOP Publishing in Nanotechnology
- Vol. 33 (37) , 375702
Assessing the insulating properties of an ultrathin SrTiO 3 shell grown around GaAs nanowires with molecular beam epitaxy
We have studied electronic transport in undoped GaAs/SrTiO 3 core–shell nanowires standing on their Si substrate with two-tip scanning tunneling microscopy in ultrahigh vacuum. The resistance profile along the nanowires is proportional to the tip separation with resistances per unit length of a few GΩ/ μ m. Examination of the different transport pathways parallel to the nanowire growth axis reveals that the measured resistance is consistent with a conduction along the interfacial states at the GaAs{110} sidewalls, the 2 nm thick SrTiO 3 shell being as much as resistive, despite oxygen deficient growth conditions. The origin of the shell resistivity is discussed in light of the nanowire analysis with transmission electron microscopy and Raman spectroscopy, providing good grounds for the use of SrTiO 3 shells as gate insulators.
- 20 June 2022
- Published by IOP Publishing in Nanotechnology
- Vol. 33 (37) , 375702
Assessing the insulating properties of an ultrathin SrTiO 3 shell grown around GaAs nanowires with molecular beam epitaxy
We have studied electronic transport in undoped GaAs/SrTiO 3 core–shell nanowires standing on their Si substrate with two-tip scanning tunneling microscopy in ultrahigh vacuum. The resistance profile along the nanowires is proportional to the tip separation with resistances per unit length of a few GΩ/ μ m. Examination of the different transport pathways parallel to the nanowire growth axis reveals that the measured resistance is consistent with a conduction along the interfacial states at the GaAs{110} sidewalls, the 2 nm thick SrTiO 3 shell being as much as resistive, despite oxygen deficient growth conditions. The origin of the shell resistivity is discussed in light of the nanowire analysis with transmission electron microscopy and Raman spectroscopy, providing good grounds for the use of SrTiO 3 shells as gate insulators.
- Open Access
- 29 March 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (7) , 1128
Transport Properties of Methyl-Terminated Germanane Microcrystallites
Germanane is a two-dimensional material consisting of stacks of atomically thin germanium sheets. It’s easy and low-cost synthesis holds promise for the development of atomic-scale devices. However, to become an electronic-grade material, high-quality layered crystals with good chemical purity and stability are needed. To this end, we studied the electrical transport of annealed methyl-terminated germanane microcrystallites in both high vacuum and ultrahigh vacuum. Scanning electron microscopy of crystallites revealed two types of behavior which arise from the difference in the crystallite chemistry. While some crystallites are hydrated and oxidized, preventing the formation of good electrical contact, the four-point resistance of oxygen-free crystallites was measured with multiple tips scanning tunneling microscopy, yielding a bulk transport with resistivity smaller than 1 Ω·cm. When normalized by the crystallite thickness, the resistance compares well with the resistance of hydrogen-passivated germanane flakes found in the literature. Along with the high purity of the crystallites, a thermal stability of the resistance at 280 °C makes methyl-terminated germanane suitable for complementary metal oxide semiconductor back-end-of-line processes.
- 29 March 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (7) , 1128
Open AccessTransport Properties of Methyl-Terminated Germanane Microcrystallites
Germanane is a two-dimensional material consisting of stacks of atomically thin germanium sheets. It’s easy and low-cost synthesis holds promise for the development of atomic-scale devices. However, to become an electronic-grade material, high-quality layered crystals with good chemical purity and stability are needed. To this end, we studied the electrical transport of annealed methyl-terminated germanane microcrystallites in both high vacuum and ultrahigh vacuum. Scanning electron microscopy of crystallites revealed two types of behavior which arise from the difference in the crystallite chemistry. While some crystallites are hydrated and oxidized, preventing the formation of good electrical contact, the four-point resistance of oxygen-free crystallites was measured with multiple tips scanning tunneling microscopy, yielding a bulk transport with resistivity smaller than 1 Ω·cm. When normalized by the crystallite thickness, the resistance compares well with the resistance of hydrogen-passivated germanane flakes found in the literature. Along with the high purity of the crystallites, a thermal stability of the resistance at 280 °C makes methyl-terminated germanane suitable for complementary metal oxide semiconductor back-end-of-line processes.