Jinglun Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jinglun Li has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Sheng Wang
Shaanxi Engineering Research Center of Advanced Nuclear Energy, Shaanxi Key Laboratory of Advanced Nuclear Energy and Technology, School of Nuclear Science and Technology, School of Energy and Power Engineering, Xi’an Jiaotong University, Xi’an 710049, China
2 shared publications - Baolong Ma
Shaanxi Engineering Research Center of Advanced Nuclear Energy, School of Nuclear Science and Technology, School of Energy and Power Engineering, Xi’an Jiaotong University, Xi’an 710049, China
1 shared publication - Chen Chen
Shaanxi Engineering Research Center of Advanced Nuclear Energy, School of Nuclear Science and Technology, School of Energy and Power Engineering, Xi’an Jiaotong University, Xi’an 710049, China
1 shared publication - Dengwang Wang
Department of Nuclear Science and Technology, Xi’an Jiaotong University, Xi’an 710049, China
1 shared publication - Fanxi Zhang
School of Nuclear Science and Technology, School of Energy and Power Engineering, Xi’an Jiaotong University, Xi’an 710049, China
1 shared publication - Haipeng Li
Shaanxi Engineering Research Center of Advanced Nuclear Energy, School of Nuclear Science and Technology, School of Energy and Power Engineering, Xi’an Jiaotong University, Xi’an 710049, China
1 shared publication
Latest Publications
- Open Access
- 24 April 2026
- Published by MDPI AG in Nanomaterials
- Vol. 16 (9) , 513
Synergistic Suppression of Secondary Electron Yield from Al2O3 Ceramic Windows by TiN Film and Laser Surface Texturing
To suppress the Secondary Electron Yield (SEY) of Al2O3 ceramic surfaces for accelerator ceramic windows, a synergistic strategy integrating TiN film deposition and laser surface texturing was developed. TiN films were first deposited on Al2O3 substrates by pulsed DC magnetron sputtering, and the sputtering power was optimized through systematic characterization of the film morphology and chemical states, with 300 W identified as the optimal deposition condition. Laser surface texturing was then introduced to construct micro-structured Al2O3 surfaces with different geometrical features. Among the investigated laser powers, the 12 W-treated surface exhibited the most developed surface morphology and the highest roughness, indicating the most favorable topography for electron trapping. SEY measurements showed that the maximum SEY decreased from 8.2 for the as-received Al2O3 to 5.5 after deposition of a 10 nm TiN film, and was further reduced to 2.1, 1.0, and 1.7 for the textured TiN/Al2O3 surfaces prepared at 6, 12, and 18 W, respectively, with the best suppression for the 12 W textured TiN/Al2O3. The enhanced performance is attributed to the synergistic effect of low-SEY TiN surface chemistry and geometrical electron trapping induced by laser texturing. This work provides an effective route for constructing low-SEY Al2O3 ceramic surfaces for beam-window-related applications.
- 24 April 2026
- Published by MDPI AG in Nanomaterials
- Vol. 16 (9) , 513
Open AccessSynergistic Suppression of Secondary Electron Yield from Al2O3 Ceramic Windows by TiN Film and Laser Surface Texturing
To suppress the Secondary Electron Yield (SEY) of Al2O3 ceramic surfaces for accelerator ceramic windows, a synergistic strategy integrating TiN film deposition and laser surface texturing was developed. TiN films were first deposited on Al2O3 substrates by pulsed DC magnetron sputtering, and the sputtering power was optimized through systematic characterization of the film morphology and chemical states, with 300 W identified as the optimal deposition condition. Laser surface texturing was then introduced to construct micro-structured Al2O3 surfaces with different geometrical features. Among the investigated laser powers, the 12 W-treated surface exhibited the most developed surface morphology and the highest roughness, indicating the most favorable topography for electron trapping. SEY measurements showed that the maximum SEY decreased from 8.2 for the as-received Al2O3 to 5.5 after deposition of a 10 nm TiN film, and was further reduced to 2.1, 1.0, and 1.7 for the textured TiN/Al2O3 surfaces prepared at 6, 12, and 18 W, respectively, with the best suppression for the 12 W textured TiN/Al2O3. The enhanced performance is attributed to the synergistic effect of low-SEY TiN surface chemistry and geometrical electron trapping induced by laser texturing. This work provides an effective route for constructing low-SEY Al2O3 ceramic surfaces for beam-window-related applications.
- Open Access
Study on Characteristics of the Light-Initiated High Explosive-Based Pulse Laser Initiation
The silver acetylene silver nitrate loading technology of the light initiated high explosive, as one of important means to simulate the structural response of powerful pulsed X-ray, adopts the pulse laser initiation. It has advantages of improvement of practical control, heterogenous loading realization and simultaneous loading timeliness. In this paper, the physical and mathematical models of hot spot initiation and photochemical initiation of energetic materials under the action of laser are firstly established, and then the laser initiation mechanism of the light initiated high explosive is specifically analyzed, and the laser initiation experiment is conducted based on the optical adsorption property of the light initiated high explosive. From this study, the laser initiation thresholds of 193 nm, 266 nm, 532 nm, 1064 nm wavelengths are given, and they are 5.07 mJ/mm2, 6.77 mJ/mm2, 7.21 mJ/mm2 and 10.61 mJ/mm2, respectively, and the complete detonation process is verified by detonation velocity. This work technically supports the study of pulse laser initiation process, mechanism and explosion loading rule as well as the loading technology of the light initiated high explosive to simulate the structural response of X ray.
Open AccessStudy on Characteristics of the Light-Initiated High Explosive-Based Pulse Laser Initiation
The silver acetylene silver nitrate loading technology of the light initiated high explosive, as one of important means to simulate the structural response of powerful pulsed X-ray, adopts the pulse laser initiation. It has advantages of improvement of practical control, heterogenous loading realization and simultaneous loading timeliness. In this paper, the physical and mathematical models of hot spot initiation and photochemical initiation of energetic materials under the action of laser are firstly established, and then the laser initiation mechanism of the light initiated high explosive is specifically analyzed, and the laser initiation experiment is conducted based on the optical adsorption property of the light initiated high explosive. From this study, the laser initiation thresholds of 193 nm, 266 nm, 532 nm, 1064 nm wavelengths are given, and they are 5.07 mJ/mm2, 6.77 mJ/mm2, 7.21 mJ/mm2 and 10.61 mJ/mm2, respectively, and the complete detonation process is verified by detonation velocity. This work technically supports the study of pulse laser initiation process, mechanism and explosion loading rule as well as the loading technology of the light initiated high explosive to simulate the structural response of X ray.