YHYonghai He

Yonghai He

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yonghai He has a total of 16 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Comparative Study on the Dynamic Response of Asphalt Pavement Structures: Analysis Using the Classic Kelvin, Maxwell, and Three-Parameter Solid Models

    by Yonghai He, Songtao Lv, Nasi Xie, Huilin Meng, Wei Lei, Changyu Pu, Huabao Ma, Ziyang Wang, Guozhi Zheng, Xinghai Peng

    This study addressed the complex problems of selecting a constitutive model to objectively characterize asphalt mixtures and accurately determine their viscoelastic properties, which are influenced by numerous variables. Inaccuracies in model or parameter determination can result in significant discrepancies between the calculated and measured results of the pavement’s structural dynamic response. To address this, the research utilized the physical engineering principles of asphalt pavement structure to perform dynamic modulus tests on three types of high-content rubberized asphalt mixtures (HCRAM) within the surface layer. The research aimed to investigate the influencing factors of the dynamic modulus and establish a comprehensive master curve. This study also critically evaluated the capabilities of three viscoelastic models—the three-parameter solid model, the classical Maxwell model, and the classical Kelvin model—in depicting the dynamic modulus of HCRAM. The findings indicated a negative correlation between the dynamic modulus of the asphalt mixture and temperature, while a positive association exists between the loading frequency and temperature, with the impact of the loading frequency diminishing as the temperature increases. Notably, the three-parameter solid model was identified as the most accurate in describing the viscoelastic properties of the HCRAM. Furthermore, the dynamic response calculations revealed that most indexes in the surface layer’s dynamic response are highest when evaluated using the three-parameter viscoelastic model, underscoring its potential to enhance the pavement performance’s predictive accuracy. This research provides valuable insights into optimizing the material performance and guiding the pavement design and maintenance strategies.


  • Open Access

    Research on the Modulus Decay Model under a Three-Dimensional Stress State of Asphalt Mixture during Fatigue Damage

    by Yonghai He, Songtao Lv, Ziyang Wang, Huabao Ma, Wei Lei, Changyu Pu, Huilin Meng, Nasi Xie, Xinghai Peng

    Fatigue damage can develop within asphalt pavement due to the continuous impact of driving loads and natural elements. Understanding the process of asphalt mixtures’ fatigue damage is crucial for guiding the design, maintenance, and repair of asphalt pavement. This research aims to establish a model that characterizes the mixtures’ modulus decay under a three-dimensional (3-D) stress state. Firstly, asphalt mixes were subjected to direct tensile (DT), indirect tensile (IDT), unconfined compressive (UC) strength and fatigue tests, and the resulting data were analyzed. Then, modulus decay models under DT, IDT, and UC conditions were established, and the modulus decay patterns under the three loading modes were compared and analyzed. Finally, using the fatigue stress strength ratio Δ (a fatigue resistance index for asphalt mixtures that takes into account the impacts of stress state and loading rate), a unified characterization model for asphalt mixes’ modulus decay under a 3-D stress state was created. According to the study’s findings, asphalt mixes’ modulus decay during fatigue damage exhibits obvious nonlinear characteristics. While the asphalt mixes’ modulus decay law with various loading modalities is similar under the same conditions, the decay rate may differ. Essentially, the speed of the modulus decay of a certain asphalt mixture primarily depends on the value of Δ during service. A larger Δ indicates a faster modulus decay. This study offers a theoretical foundation for the conversion from material fatigue damage to structural fatigue damage, which is vital for enhancing the asphalt pavements’ construction quality and longevity.


  • Open Access

    Performance-Based Expressway Asphalt Pavement Structural Surface Layer Modulus Matching Mode Research

    by Yonghai He, Changyu Pu, Peng Xu, Xujia Li, Guangqing Yang, Huilin Meng

    The current asphalt pavement design theory is a traditional line elastic theory. The voltage resistance recovery modulus is used as the material stiffness parameter in the design, which does not fully consider the significant differences between the road material pull-up modulus. Therefore, to improve the overall stress of the pavement structure, this article started from the perspective of the volume of the structure layer, analyzed the development characteristics of reflected cracks in terms of the modular volume of different surface layers, and studied the size of each layer. It is proposed to match the asphalt pavement layer modulus with the crack development level. Based on structural computing and simulation, the application of different modular matching modes was verified, and support was provided for the design of the pavement structure. The results showed that with the increase of the surface modulus, the stress intensity factor determined by a semi-analytical method showed a nonlinear decrease trend, and the change of stress intensity factor was not obvious when the modulus was greater than 10,000; the surface layer compression mode ratio increased, and the vertical deformation of the road surface and the top surface pressure of the road base slowly increased, especially when the volume of the pressure pull-up ratio was greater than 1.5. In addition, the impact of the constraint between the surface layer on the vertical deformation of the road table decreased with the decrease in the volume of the surface layer.


  • Open Access

    The Cracking Resistance Behavior of Geosynthetics-Reinforced Asphalt Concrete under Lower Temperatures Using Bending Test

    by Qiaoyi Li, Yonghai He, Guangqing Yang, Penghui Su, Biao Li

    Asphalt is a kind of temperature-sensitive material. With the decrease of temperature, the deformation capacity of an asphalt mixture will be significantly reduced. When the temperature is greatly reduced, the asphalt layer will produce large shrinkage tensile stress and strain, resulting in cracking. Therefore, the cracking resistance behavior is essential for the asphalt. In order to study the cracking resistance behavior of geosynthetics-reinforced asphalt under lower temperatures, the bending tests were carried out indoors at a temperature of −10 °C. The results showed that compared with the unreinforced asphalt sample, the flexural tensile strength at failure of the geogrid-reinforced sample was increased by 14.1% and 12.3%, corresponding to AC-13C and AC-20C. Additionally, the geotextile-reinforced sample was reduced by 2.5% and 3.6%, corresponding to AC-13C and AC-20C. The values of the bending stiffness modulus of the geogrid- and geotextile-reinforced samples were reduced by 6% and 1%. The cracking energy of the geogrid-reinforced asphalt provides by 45.2% and 30.8% more than unreinforced asphalt, corresponding to AC-13C and AC-20C. The cracking energy of the geotextile-reinforced asphalt is increased by 4.5% and 0.6% compared with unreinforced asphalt, corresponding to AC-13C and AC-20C. The cracking resistance behavior of geogrid-reinforced asphalt is better than unreinforced and geotextile-reinforced asphalt. The asphalt shows obvious brittleness at a temperature of −10 °C, and the existence of the geosynthetics does not change the shape of the load–deflection curves.