Lorenzo Galati-Giordano
Research Subjects
Lorenzo Galati-Giordano has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Boris Bellalta
Department of Engineering, Universitat Pompeu Fabra, Barcelona, Spain
6 shared publications - Giovanni Geraci
Universitat Pompeu Fabra, Barcelona, Spain
6 shared publications - Francesc Wilhelmi
Department of Engineering, Universitat Pompeu Fabra, Barcelona, Spain
4 shared publications - Marc Carrascosa
Wireless Networking Research Group Universitat Pompeu Fabra Carrer de Roc Boronat 138 08018 Barcelona Spain
3 shared publications - Anders Jonsson
Universitat Pompeu Fabra
2 shared publications - Andrea Bonfante
CONNECT Centre, Trinity College Dublin, Dublin 2, Ireland
1 shared publication
Latest Publications
- 8 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Letters
- Vol. 30 (10897798) , 2004-2008
NOMA-Based Multi-Link Operation for Performance Enhancement of Wi-Fi 9 and Beyond
Multi-link operation (MLO), firstly introduced in Wi-Fi 7, is going to be an integral part of beyond Wi-Fi 8 protocol evolution. This feature enables the seamless coordination of multiple frequency bands under a single association, however it maintains the basic contention principles on each link. In this letter, we propose non-orthogonal multiple access (NOMA) based MLO for enhancing the throughput performance of future Wi-Fi 9. The proposed scheme allocates the links to the MLDs based on propagation characteristics as well as incorporates NOMA multiplexing principles. We also propose a simple analytical model for the throughput analysis. The analytical and simulation results show that the proposed scheme has the potential to significantly improve the throughput performance of futureWi-Fi 9 and beyond networks by permitting multiple nodes to transmit simultaneously. Our scheme achieves a throughput improvement of 108.49% for a network with 90 users.
- 8 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Letters
- Vol. 30 (10897798) , 2004-2008
NOMA-Based Multi-Link Operation for Performance Enhancement of Wi-Fi 9 and Beyond
Multi-link operation (MLO), firstly introduced in Wi-Fi 7, is going to be an integral part of beyond Wi-Fi 8 protocol evolution. This feature enables the seamless coordination of multiple frequency bands under a single association, however it maintains the basic contention principles on each link. In this letter, we propose non-orthogonal multiple access (NOMA) based MLO for enhancing the throughput performance of future Wi-Fi 9. The proposed scheme allocates the links to the MLDs based on propagation characteristics as well as incorporates NOMA multiplexing principles. We also propose a simple analytical model for the throughput analysis. The analytical and simulation results show that the proposed scheme has the potential to significantly improve the throughput performance of futureWi-Fi 9 and beyond networks by permitting multiple nodes to transmit simultaneously. Our scheme achieves a throughput improvement of 108.49% for a network with 90 users.
- Top Cited PapersOpen Access
- 10 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Proceedings of the IEEE
- Vol. 113 (11) , 1290-1336
Wi-Fi: 25 Years and Counting
Today, Wi-Fi is over 25 years old. Yet, despite sharing the same branding name, today’s Wi-Fi boasts entirely new capabilities that were not even on the roadmap 25 years ago. This article aims to provide a holistic and comprehensive technical and historical tutorial on Wi-Fi, beginning with Institute of Electrical and Electronics Engineers 802.11b (Wi-Fi 1) and looking forward to IEEE 802.11bn (Wi-Fi 8). This is the first tutorial article to span these eight generations. Rather than a generation-by-generation exposition, we describe the key mechanisms that have advanced Wi-Fi. We begin by discussing spectrum allocation and coexistence, and detailing the IEEE 802.11 standardization cycle. Second, we provide an overview of the physical layer (PHY) and describe key elements that have enabled data rates to increase by over 1000×. Third, we describe how Wi-Fi medium access control (MAC) has been enhanced from the original distributed coordination function (DCF) to now include capabilities spanning from frame aggregation to wideband spectrum access. Fourth, we describe how Wi-Fi 5 first broke the one-user-at-a-time paradigm and introduced multi-user (MU) access. Fifth, given the increasing use of mobile, battery-powered devices, we describe Wi-Fi’s energy-saving mechanisms over the generations. Sixth, we discuss how Wi-Fi was enhanced to seamlessly aggregate spectrum across 2.4-, 5-, and 6-GHz bands to improve throughput, reliability, and latency. Finally, we describe how Wi-Fi enables nearby access points (APs) to coordinate in order to improve performance and efficiency. In the Appendix, we further discuss Wi-Fi developments beyond 802.11bn, including integrated millimeter-wave (IMMW) operations, sensing, security and privacy extensions, and the adoption of artificial intelligence (AI)/machine learning (ML).
- 10 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Proceedings of the IEEE
- Vol. 113 (11) , 1290-1336
Top Cited PapersOpen AccessWi-Fi: 25 Years and Counting
Today, Wi-Fi is over 25 years old. Yet, despite sharing the same branding name, today’s Wi-Fi boasts entirely new capabilities that were not even on the roadmap 25 years ago. This article aims to provide a holistic and comprehensive technical and historical tutorial on Wi-Fi, beginning with Institute of Electrical and Electronics Engineers 802.11b (Wi-Fi 1) and looking forward to IEEE 802.11bn (Wi-Fi 8). This is the first tutorial article to span these eight generations. Rather than a generation-by-generation exposition, we describe the key mechanisms that have advanced Wi-Fi. We begin by discussing spectrum allocation and coexistence, and detailing the IEEE 802.11 standardization cycle. Second, we provide an overview of the physical layer (PHY) and describe key elements that have enabled data rates to increase by over 1000×. Third, we describe how Wi-Fi medium access control (MAC) has been enhanced from the original distributed coordination function (DCF) to now include capabilities spanning from frame aggregation to wideband spectrum access. Fourth, we describe how Wi-Fi 5 first broke the one-user-at-a-time paradigm and introduced multi-user (MU) access. Fifth, given the increasing use of mobile, battery-powered devices, we describe Wi-Fi’s energy-saving mechanisms over the generations. Sixth, we discuss how Wi-Fi was enhanced to seamlessly aggregate spectrum across 2.4-, 5-, and 6-GHz bands to improve throughput, reliability, and latency. Finally, we describe how Wi-Fi enables nearby access points (APs) to coordinate in order to improve performance and efficiency. In the Appendix, we further discuss Wi-Fi developments beyond 802.11bn, including integrated millimeter-wave (IMMW) operations, sensing, security and privacy extensions, and the adoption of artificial intelligence (AI)/machine learning (ML).
- 10 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Standards Magazine
- Vol. 10 (2) , 316-322
Improving Wi-Fi 8 Latency With Coordinated Spatial Reuse
IEEE 802.11 networks continuously adapt to meet the stringent requirements of emerging applications like cloud gaming, eXtended Reality (XR), and video streaming services, which require high throughput, low latency, and high reliability. To address these challenges, Coordinated Spatial Reuse (Co-SR) can potentially contribute to optimizing spectrum resource utilization. This mechanism is expected to enable simultaneous transmissions, thereby boosting spectral efficiency in dense environments and increasing the overall network performance. In this paper, we shed light on the performance of Co-SR for Wi-Fi 8 networks. For that, we propose an implementation of Co-SR aligned with ongoing Wi-Fi 8 standardization efforts. The evaluation is done on a Wi-Fi simulator, which allows us to study the performance of the proposed Co-SR mechanisms in relevant scenarios. The results obtained in a Wireless Local Area Network (WLAN) consisting of four APs show delay reduction with Co-SR ranging from 31% to 95% when compared to Distributed Coordination Function (DCF).
- 10 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Standards Magazine
- Vol. 10 (2) , 316-322
Improving Wi-Fi 8 Latency With Coordinated Spatial Reuse
IEEE 802.11 networks continuously adapt to meet the stringent requirements of emerging applications like cloud gaming, eXtended Reality (XR), and video streaming services, which require high throughput, low latency, and high reliability. To address these challenges, Coordinated Spatial Reuse (Co-SR) can potentially contribute to optimizing spectrum resource utilization. This mechanism is expected to enable simultaneous transmissions, thereby boosting spectral efficiency in dense environments and increasing the overall network performance. In this paper, we shed light on the performance of Co-SR for Wi-Fi 8 networks. For that, we propose an implementation of Co-SR aligned with ongoing Wi-Fi 8 standardization efforts. The evaluation is done on a Wi-Fi simulator, which allows us to study the performance of the proposed Co-SR mechanisms in relevant scenarios. The results obtained in a Wireless Local Area Network (WLAN) consisting of four APs show delay reduction with Co-SR ranging from 31% to 95% when compared to Distributed Coordination Function (DCF).
- Open Access
- 18 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Communications Society
- Vol. 6, 7782-7794
Modeling and Performance Analysis of Non-Primary Channel Access in Wi-Fi Networks
This paper aims to improve our understanding of the performance of the Non-Primary Channel Access (NPCA) mechanism, a new feature introduced in IEEE 802.11bn to enhance spectrum utilization in Wi-Fi networks. NPCA enables devices to contend for and transmit on the secondary channel when the primary channel is occupied by transmissions from an Overlapping Basic Service Set (OBSS). We develop a Continuous-Time Markov Chain (CTMC) model that captures the interactions among OBSSs in dense Wireless Local Area Network (WLAN) environments when NPCA is enabled, incorporating new NPCA-specific states and transitions. In addition to the analytical insights offered by the model, we conduct numerical evaluations and simulations to quantify NPCAs impact on throughput and channel access delay across various scenarios. Our results show that NPCA can significantly improve throughput and reduce access delays in favorable conditions for BSSs that support the mechanism. Moreover, NPCA helps mitigate the OBSS performance anomaly, where low-rate OBSS transmissions degrade network performance for all nearby devices. However, we also observe trade-offs: NPCA may increase contention on secondary channels, potentially reducing transmission opportunities for BSSs operating there. Overall, the proposed modeling approach offers a foundation for analyzing, optimizing, and guiding the development of NPCA in next-generation Wi-Fi networks.
- 18 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Communications Society
- Vol. 6, 7782-7794
Open AccessModeling and Performance Analysis of Non-Primary Channel Access in Wi-Fi Networks
This paper aims to improve our understanding of the performance of the Non-Primary Channel Access (NPCA) mechanism, a new feature introduced in IEEE 802.11bn to enhance spectrum utilization in Wi-Fi networks. NPCA enables devices to contend for and transmit on the secondary channel when the primary channel is occupied by transmissions from an Overlapping Basic Service Set (OBSS). We develop a Continuous-Time Markov Chain (CTMC) model that captures the interactions among OBSSs in dense Wireless Local Area Network (WLAN) environments when NPCA is enabled, incorporating new NPCA-specific states and transitions. In addition to the analytical insights offered by the model, we conduct numerical evaluations and simulations to quantify NPCAs impact on throughput and channel access delay across various scenarios. Our results show that NPCA can significantly improve throughput and reduce access delays in favorable conditions for BSSs that support the mechanism. Moreover, NPCA helps mitigate the OBSS performance anomaly, where low-rate OBSS transmissions degrade network performance for all nearby devices. However, we also observe trade-offs: NPCA may increase contention on secondary channels, potentially reducing transmission opportunities for BSSs operating there. Overall, the proposed modeling approach offers a foundation for analyzing, optimizing, and guiding the development of NPCA in next-generation Wi-Fi networks.
- Open Access
- 1 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Communications Society
- Vol. 6, 6477-6490
XR Streaming Performance With Wi-Fi 7 Multi-Link Operation
- 1 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Communications Society
- Vol. 6, 6477-6490
Open AccessXR Streaming Performance With Wi-Fi 7 Multi-Link Operation
- Open Access
- 1 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Performance and Coexistence Evaluation of IEEE 802.11be Multi-link Operation
Wi-Fi 7 is already in the making, and Multi-Link Operation (MLO) is one of the main features proposed in its correspondent IEEE 802.11be amendment. MLO will allow devices to coordinate multiple radio interfaces to access separate channels through a single association, aiming for improved throughput, network delay, and overall spectrum reuse efficiency. In this work, we study three reference scenarios to evaluate the performance of the two main MLO implementations— Multi-Link Multi-Radio (MLMR) and Multi-Link Single-Radio (MLSR)—, the interplay between multiple nodes employing them, and their coexistence with legacy Single-Link devices. Importantly, our results reveal that the potential of MLMR is mainly unleashed in isolated deployments or under unloaded network conditions. Instead, in medium- to high-load scenarios, MLSR may prove more effective in reducing the latency while guaranteeing fairness with contending Single-Link nodes.
- 1 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Open AccessPerformance and Coexistence Evaluation of IEEE 802.11be Multi-link Operation
Wi-Fi 7 is already in the making, and Multi-Link Operation (MLO) is one of the main features proposed in its correspondent IEEE 802.11be amendment. MLO will allow devices to coordinate multiple radio interfaces to access separate channels through a single association, aiming for improved throughput, network delay, and overall spectrum reuse efficiency. In this work, we study three reference scenarios to evaluate the performance of the two main MLO implementations— Multi-Link Multi-Radio (MLMR) and Multi-Link Single-Radio (MLSR)—, the interplay between multiple nodes employing them, and their coexistence with legacy Single-Link devices. Importantly, our results reveal that the potential of MLMR is mainly unleashed in isolated deployments or under unloaded network conditions. Instead, in medium- to high-load scenarios, MLSR may prove more effective in reducing the latency while guaranteeing fairness with contending Single-Link nodes.
- 9 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 12 (4) , 595-599
Delay Analysis of IEEE 802.11be Multi-Link Operation Under Finite Load
Multi-link Operation (MLO), arguably the most disruptive feature introduced in IEEE 802.11be, will cater for delay-sensitive applications by using multiple radio interfaces concurrently. In this paper, we analyze the delay distribution of MLO under non-saturated traffic. Our results show that upgrading from legacy single-link to MLO successfully contains the 95th percentile delay as the traffic load increases, but also that adding extra interfaces yields rapidly diminishing gains. Further experiments we conduct on Google Stadia traces, accounting for realistic traffic with batch arrivals, confirm the insights stemming from our theoretical analysis, vouching for MLO to support highresolution real-time video with a controlled delay.
- 9 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 12 (4) , 595-599
Delay Analysis of IEEE 802.11be Multi-Link Operation Under Finite Load
Multi-link Operation (MLO), arguably the most disruptive feature introduced in IEEE 802.11be, will cater for delay-sensitive applications by using multiple radio interfaces concurrently. In this paper, we analyze the delay distribution of MLO under non-saturated traffic. Our results show that upgrading from legacy single-link to MLO successfully contains the 95th percentile delay as the traffic load increases, but also that adding extra interfaces yields rapidly diminishing gains. Further experiments we conduct on Google Stadia traces, accounting for realistic traffic with batch arrivals, confirm the insights stemming from our theoretical analysis, vouching for MLO to support highresolution real-time video with a controlled delay.
- 7 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Cognitive Communications and Networking
- Vol. 8 (2) , 812-827
Performance of Predictive Indoor mmWave Networks With Dynamic Blockers
In this paper, we consider millimeter Wave (mmWave) technology to provide reliable wireless network service within factories where links may experience rapid and temporary fluctuations of the received signal power due to dynamic blockers, such as humans and robots, moving in the environment. We propose a novel beam recovery procedure that leverages Machine Learning (ML) tools to predict the starting and finishing of blockage events. This erases the delay introduced by current 5G New Radio (5G-NR) procedures when switching to an alternative serving base station and beam, and then re-establish the primary connection after the blocker has moved away. Firstly, we generate synthetic data using a detailed system-level simulator that integrates the most recent 3GPP 3D Indoor channel models and the geometric blockage Model-B. Then, we use the generated data to train offline a set of beam-specific Deep Neural Network (DNN) models that provide predictions about the beams’ blockage states. Finally, we deploy the DNN models online into the system-level simulator to evaluate the benefits of the proposed solution. Our prediction-based beam recovery procedure guarantees higher signal level stability and up to 82% data rate improvement with respect a detection-based method when blockers move at speed of 2 m/s.
- 7 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Cognitive Communications and Networking
- Vol. 8 (2) , 812-827
Performance of Predictive Indoor mmWave Networks With Dynamic Blockers
In this paper, we consider millimeter Wave (mmWave) technology to provide reliable wireless network service within factories where links may experience rapid and temporary fluctuations of the received signal power due to dynamic blockers, such as humans and robots, moving in the environment. We propose a novel beam recovery procedure that leverages Machine Learning (ML) tools to predict the starting and finishing of blockage events. This erases the delay introduced by current 5G New Radio (5G-NR) procedures when switching to an alternative serving base station and beam, and then re-establish the primary connection after the blocker has moved away. Firstly, we generate synthetic data using a detailed system-level simulator that integrates the most recent 3GPP 3D Indoor channel models and the geometric blockage Model-B. Then, we use the generated data to train offline a set of beam-specific Deep Neural Network (DNN) models that provide predictions about the beams’ blockage states. Finally, we deploy the DNN models online into the system-level simulator to evaluate the benefits of the proposed solution. Our prediction-based beam recovery procedure guarantees higher signal level stability and up to 82% data rate improvement with respect a detection-based method when blockers move at speed of 2 m/s.