Yuchen Zhang

Traditional discrete-array-based systems fail to fully exploit interactions between closely spaced antennas, resulting in inadequate utilization of the aperture resource. In this paper, we propose a holographic intelligence surface (HIS) assisted integrated sensing and communication (HISAC) system, wherein both the transmitter and receiver are fabricated using a continuous-aperture array. To enable tractable design and optimization, we introduce a Fourier-based continuousdiscrete transformation, converting the continuous pattern design into a finite-dimensional representation in the wavenumber domain. Based on this transformation, we formulate a joint transmit–receive beamforming optimization problem that aims to maximize multi-target sensing performance while satisfying multi-user communication requirements. To solve the non-convex problem with coupled variables, an alternating optimization algorithm is proposed for HISAC transmit-receive beamforming. Specifically, the transmit beamforming design is solved by decoupling into a series of feasibility-checking sub-problems while the receive beamforming is determined by the Rayleigh quotientbased method. Simulation results demonstrate the superiority of the proposed HISAC system over traditional discrete-array-based ISAC systems, achieving significantly higher sensing performance while guaranteeing predetermined communication performance.

Artificial noise (AN) has been recognized as an effective physical-layer security scheme impairing the eavesdropper (Eve). Recently, artificial noise elimination (ANE) has emerged as a promising strategy to mitigate the impact of AN at Eves. However, conventional ANE schemes rely on prior knowledge, such as legitimate channel state information (CSI) or classification information, which may limit their practical applicability. To address these practical challenges, we propose an ANE scheme beyond prior knowledge (BPK) by leveraging machine learning algorithms. Firstly, a coarse projection is applied to partially eliminate the impact of AN using maximum likelihood estimation on the equivalent AN matrix. Secondly, a density clustering algorithm is introduced to obtain classification information based on the coarsely-projected observed vectors. Thirdly, a generalized principal component analysis (PCA)-based ANE algorithm is developed to effectively mitigate the residual AN using the obtained classification information. Furthermore, the artificial-noise-to-signal ratio (ANSR) and computational complexity are analyzed for performance revaluation, and a redefinition of several AN design principles is provided for scenarios involving a powerful Eve equipped with the BPK-ANE scheme by deriving the validity boundary. Finally, numerical results reveal key insights into four principles of AN: 1) Allocating less power to AN; 2) Reducing the randomness of AN; 3) Increasing the number of transmit antennas; and 4) Increasing the modulation order.

This paper presents an end-to-end deep learning framework in a movable antenna (MA)-enabled multiuser communication system. In contrast to the conventional works assuming perfect channel state information (CSI) for MA placement or adopting a decoupled CSI acquisition and MA placement design paradigm, we address the practical CSI acquisition issue through the design of pilot signals and quantized CSI feedback, and further incorporate the joint optimization of channel estimation, MA placement, and precoding design. The proposed mechanism enables the system to learn an optimized transmission strategy from imperfect channel data, overcoming the limitations of conventional methods that conduct channel estimation and antenna position optimization separately. To balance the performance and overhead, we further extend the proposed framework to optimize the antenna placement based on the statistical CSI. Simulation results demonstrate that the proposed approach consistently outperforms traditional benchmarks in terms of achievable sum-rate of users, especially under limited feedback and sparse channel environments. Notably, it achieves a performance comparable to the widely-adopted gradient-based methods with perfect CSI, while maintaining significantly lower CSI feedback overhead. These results highlight the effectiveness and adaptability of learning-based MA system design for future wireless systems.

Electromagnetically reconfigurable fluid antenna system (ER-FAS) introduces additional degrees of freedom in the electromagnetic (EM) domain by dynamically steering per-antenna radiation patterns, thereby enhancing power efficiency in wireless links. Unlike prior works on spatially reconfigurable FAS, which adjust element positions, ER-FAS provides direct control over each element's EM characteristics to realize on-demand beam-pattern shaping. While existing studies have exploited ER-FAS to boost spectral efficiency, this paper explores its application for downlink localization. We consider a multiple-input single-output (MISO) system in which a multi-antenna ER-FAS at the base station serves a single-antenna user equipment (UE). We consider two reconfigurability paradigms: (i) a synthesis model where each antenna generates desired beampatterns from a finite set of EM basis functions, and (ii) a finite-state selection model in which each antenna selects a pattern from a predefined set of patterns. For both paradigms, we formulate the joint baseband (BB) and EM precoder design to minimize the UE position error bound. In the synthesis case we derive low-dimensional closed-form expressions for both the BB and EM precoders. For the finite-state model we obtain closed-form BB structures and propose a low-complexity block-coordinate-descent algorithm for EM pattern selection. Analytical bounds and extensive simulations show that the proposed hybrid designs for ER-FAS substantially improve UE positioning accuracy over traditional non-reconfigurable arrays.

Reconfigurable antennas (RAs) and movable antennas (MAs) have been recognized as promising technologies to enhance the performance of wireless communication and sensing systems by introducing additional degrees of freedom (DoFs) in tuning antenna radiation and/or placement. This paradigm shift from conventional non-reconfigurable/movable antennas offers tremendous new opportunities for realizing multi-functional, more adaptive, and efficient next-generation wireless networks. In this paper, we provide a comprehensive survey on the fundamentals, architectures, and applications of these two emerging antenna technologies. First, we provide a chronological overview of the parallel historical development of both RA and MA technologies. Next, we review and classify the state-of-the-art hardware architectures for implementing RAs and MAs, followed by a detailed comparison of their distinct mechanisms, performance metrics, and functionalities. Subsequently, we focus on various applications of RAs and MAs in wireless communication systems, analyzing their respective performance advantages and key design considerations such as mode selection, movement optimization, and channel acquisition. We also explore the significant roles of RAs and MAs in advancing wireless sensing and integrated sensing and communication (ISAC). Furthermore, we present numerical performance comparisons to illustrate the distinct characteristics and complementary advantages of RA and MA systems. Finally, we outline key challenges and identify promising future research directions to inspire further innovations in this burgeoning field.

Low Earth orbit (LEO) satellite constellations are rapidly becoming essential enablers of next-generation wireless systems, offering global broadband access, high-precision localization, and reliable sensing beyond terrestrial coverage. However, the inherent limitations of individual LEO satellites, including restricted power, limited antenna aperture, and constrained onboard processing, hinder their ability to meet the growing demands of 6G applications. To address these challenges, this article introduces the concept of distributed integrated sensing, localization, and communication (DISLAC) over LEO constellations, inspired by distributed multiple input multiple output architectures. By enabling inter-satellite cooperation through inter-satellite links, DISLAC jointly exploits communication, localization, and sensing functionalities, achieving synergistic gains in throughput, positioning accuracy, and sensing robustness through shared resources and cooperative design. We present illustrative case studies that quantify these benefits and analyze key system-level considerations, including synchronization, antenna reconfigurability, and inter-satellite link design. The article concludes by outlining open research directions to advance the practical deployment of DISLAC in future non-terrestrial networks.

We investigate a multi-low Earth orbit (LEO) satellite system that simultaneously provides positioning and communication services to terrestrial user terminals. To address the challenges of accurately acquiring channel state information in LEO satellite systems, we propose a novel two-timescale positioning-aided channel estimation framework, exploiting the distinct variation rates of position-related parameters and channel gains inherent in LEO satellite channels. Using the misspecified Cramér-Rao bound (MCRB) theory, we systematically analyze positioning performance under practical imperfections, such as inter-satellite clock bias and carrier frequency offset. Furthermore, we theoretically demonstrate how position information derived from downlink positioning can enhance uplink channel estimation accuracy, even in the presence of positioning errors, through an MCRB-based analysis. To address the limited link budgets and communication rates of single-satellite communication, we develop a multi-LEO cooperative beamforming strategy for downlink transmission that leverages cluster-wise satellite cooperation while maintaining reduced complexity. Theoretical analyses and numerical results confirm the effectiveness of the proposed framework in facilitating high-precision downlink positioning under practical imperfections, facilitating uplink channel estimation, and enabling efficient downlink communication.

The evolution of 5G-advanced (5G-A) systems relies heavily on advanced beamforming technologies to achieve high spectral efficiency and network capacity. Although abundant theoretical research has been devoted to optimizing beamforming based on full channel state information (CSI), a major gap remains with the codebook-based beamforming defined in 3rd Generation Partnership Project (3GPP) standards for practical deployment. This disconnect is exacerbated by the often complex and elusive nature of the protocol descriptions themselves. This paper bridges this critical gap by providing a systematic examination of the beamforming codebook technology, i.e., precoding matrix indicator (PMI), in the 5G NR from theoretical, standardization, and implementation perspectives. We begin by introducing the background of beamforming in multiple-input multiple-output (MIMO) systems and the signaling procedures for codebook-based beamforming in practical 5G systems. Then, we establish the fundamentals of regular codebooks and port-selection codebooks in 3GPP standards. Next, we provide rigorous technical analysis of 3GPP codebook evolution spanning Releases 15-18, with particular focus on: 1) We elucidate the core principles underlying codebook design, 2) provide clear physical interpretations for each symbolic variable in the codebook formulas, summarized in tabular form, and 3) offer intuitive visual illustrations to explain how codebook parameters convey information. These essential pedagogical elements are almost entirely absent in the often-obscure standardization documents. Through mathematical modeling, performance benchmarking, feedback comparisons, and scenario-dependent applicability analysis, we provide researchers and engineers with a unified understanding of beamforming codebooks in real-world systems. Furthermore, we identify future directions and other beamforming scenarios for ongoing research and development efforts. This work serves not only as a tutorial but also as a reference book for simulation and a guide for future research, facilitating more effective collaboration between academia and industry in advancing wireless communication technologies.