Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Wagari Mosisa Kitessa has a total of 20 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Mantle CO2 degassing and carbon dynamics in a volcanic aquifer: δ13C evidence and Python-coded PhreeQC quantification for the Jimma area, Ethiopia

    by Wagari Mosisa Kitessa, Sisay Kebede Balcha, Lelisa Regea Mengistu, Sebilewongel Milargh, Milkesa Kelbessa Kebbe

  • Open Access

    Physical Characterization of Volcanic Aquifer Systems in the Southwestern Ethiopian Highlands: A Case of the Gilgel Gibe Catchment

    by Fayera Gudu Tufa, Fekadu Fufa Feyessa, Adisu Befekadu Kebede, Wagari Mosisa Kitessa, Seifu Kebede Debela, Alemu Yenehun, Thomas Hermans, Kristine Walraevens

    Volcanic aquifers are globally important groundwater resources, but their pronounced heterogeneity arising from lava emplacement, volcanic facies, structural features, and differential weathering makes hydrogeological characterization challenging. In many developing regions, limited field data further constrain aquifer characterization, increasing uncertainty in groundwater development and management. This challenge is evident in the Gilgel Gibe Catchment, where increasing groundwater demand and limited hydrogeological information require improved understanding of aquifer properties and productivity. This study characterized the aquifer systems of the Gilgel Gibe catchment primarily through lithological log and pumping test interpretations, supported by spring discharge measurements. A total of 30 deep boreholes were analyzed using pumping test data, including 14 with suitable recovery test data. Lithostratigraphic logs were integrated with diagnostic plots to identify aquifer conditions and select appropriate analytical solutions. The aquifer system is predominantly confined, followed by leaky-confined and locally unconfined conditions, interpreted using the Theis, Hantush-Jacob, and Neuman methods, respectively. Estimated transmissivity ranges from 3.9 × 10−6 to 1.3 × 10−2 m2/s, while spring discharges varied from 0.002 to 5 L/s. The Setema, Upper, Middle, and Lower Basalt, and Trachyte flows form low to moderately productive, fracture-controlled aquifers. The Lower Pyroclastic deposits and stratified tuffs form low-productivity aquifers due to the predominance of tuffs, while rhyolite exhibits low productivity due to the predominance of massive lava layers. Alluvial deposits form shallow aquifers dominated by intergranular porosity, underlain mainly by low-permeability tuffaceous materials. These findings provide a hydrogeological basis for guiding groundwater exploration, supporting well-field development, and informing sustainable groundwater management in volcanic terrains.

  • Optimization of surface water treatment using indigenous biocoagulants ( Opuntia ficus-indica and Moringa stenopetala ): a central composite design approach

    by Sebilewongel Milargh, Esayas Alemayehu, Wagari Mosisa Kitessa

    The growing concerns over the economic, health, and environmental impacts of traditional chemical coagulants have sparked a global interest in finding more sustainable alternatives for water treatment. This study explores and compares two locally available Ethiopian plant-based coagulants, cactus (Opuntia ficus-indica) and Moringa stenopetala, to determine their effectiveness in purifying contaminated surface water. Using response surface methodology with a face-centered central composite design, we examined how four critical operational factors – pH, coagulant dosage, stirring speed, and stirring time – influence the removal of color, chemical oxygen demand, and turbidity from water. The findings highlight a clear difference in the optimal conditions for each coagulant: cactus showed the best performance in highly acidic environments (pH 2.5), while M. stenopetala was most effective in alkaline conditions (pH 10). More notably, M. stenopetala outperformed cactus across all key metrics, achieving M. stenopetala achieved high physical clarification (color: 99.4%, turbidity: 96.6%) but moderate dissolved organic removal (chemical oxygen demand (COD): 56.1%), which is consistent with the known limitations of natural coagulants for treating dissolved organic matter. The study's statistical models proved both reliable and experimentally validated. It highlights M. stenopetala as a natural, eco-friendly, and affordable bio-coagulant, an effective water purification solution, especially for low-resource communities.

  • Open Access

    Hydrogeochemical Processes and Water Quality Assessment in Volcanic Aquifers of the Gilgel Gibe and Upper Dhidhessa Catchments, Southwestern Ethiopia

    by Adisu Befekadu Kebede, Fayera Gudu Tufa, Wagari Mosisa Kitessa, Beekan Gurmessa Gudeta, Seifu Kebede Debela, Jill Van Reybrouck, Alemu Yenehun, Fekadu Fufa Feyessa, Thomas Hermans, Kristine Walraevens

    Groundwater is a critical resource for domestic, agricultural, and industrial use in the Gilgel Gibe and Dhidhessa catchments of southwestern Ethiopia, where volcanic aquifer systems are the main sources. However, groundwater quality in these catchments has been under pressure from anthropogenic activities such as population growth, land-use changes, and pollution driven by rapid development and poor resource management. This study investigates hydrogeochemical processes and evaluates groundwater quality in volcanic aquifers using hydrochemical analyses and a stable isotope approach applied to 115 water samples. The spatial distribution of various physicochemical and hydrogeochemical parameters shows a distinct contrast between the highland and lowland regions, indicating topography-driven variations in water quality and geochemical processes. In hand-dug wells, springs, and surface waters, the ionic order is Ca2+ > Na+ > Mg2+ > K+ and HCO3− > NO3− > Cl− > SO42−, whereas deep wells show Na+ > Ca2+ > Mg2+ > K+ and HCO3− > Cl− > SO42− > NO3−. The predominant groundwater type is Ca-HCO3, followed by Na-HCO3 and Ca-NO3, with other types including Ca-Mg-HCO3, Ca-Na-HCO3, and Na-Ca-HCO3. Water types of Ca-HCO3 and Ca-Mg-HCO3 dominate the upland areas, indicating relatively young groundwater with moderate total dissolved solids (TDSs) and enrichment in δ18O and δ2H, where highly mineralized Na-HCO3 water types prevail in the deep aquifers of the lowland regions, where δ18O and δ2H are relatively depleted. Principal component analysis, cross-plots of major cations versus HCO3−, and mineral stability diagrams indicate that aluminosilicate weathering and dissolution are the dominant processes controlling groundwater chemistry in the study area. The higher saturation index values observed in the deep wells indicate water closer to mineral equilibrium, suggesting more extended water–rock interaction relative to the shallow wells. The CO2 partial pressures calculated using PHREEQC exceed atmospheric levels (~10−3.5 atm), indicating sources from atmospheric influx, soil, or biogenic activity for most samples, and deeper sources such as mantle degassing may be found in a few deep wells. Scatter plots of Cl− vs. SO42− and Cl− vs. NO3−, associated with Ca(NO3)2, NaNO3, and CaCl2 water types, suggest that anthropogenic inputs are the second major factor influencing the area’s water chemistry. Stable isotope analyses and hydrochemical data indicate that groundwater in the area primarily originates from local precipitation, with isotopic signatures reflecting strong groundwater–surface water interaction. These findings improve understanding of regional hydrogeochemistry and groundwater quality and help identify promising zones for sustainable groundwater development. This study provides valuable insights into groundwater resource management both in the study area and in regions sharing comparable geological contexts.


  • Open Access

    A stochastic framework for reliability assessment of a novel biomineral coagulant in hospital wastewater treatment

    by Wagari Mosisa Kitessa, Lelisa Regea Mengistu, Firomsa Bidira

    Three-panel flowchart of a stochastic reliability framework. Left: Hospital wastewater treated with OPP/PS coagulant under ±9%–10% operational uncertainty. Center: Monte Carlo simulation (10,000 iterations). Right: Reliability results: BOD 99.9%, TDS/turbidity/color ~100%, COD 81.9%. Dosage is the critical control parameter Hospital wastewater is complex and hazardous, containing a mixture of pathogens, organic matter, and micropollutants, which calls for treatment solutions that are both robust and sustainable. This study explores a novel, eco-friendly biomineral coagulant, composed of an equal blend of orange peel powder (OPP) and pumice substrate (PS), as a promising alternative to conventional chemical coagulants. Moving beyond traditional optimization approaches, we developed a stochastic framework to assess the reliability of treatment performance under real-world variability. Using response surface methodology to model the system, a Monte Carlo simulation with 10,000 iterations was employed to propagate uncertainties in input factors, dosage variation of ±9%, and mixing and settling times of ±10%, through to the treatment outcomes. The results highlight the high effectiveness and reliability of the OPP/PS system. Probabilities of meeting strict performance targets were 81.9% for chemical oxygen demand (>80%), 99.9% for biochemical oxygen demand (>75%), and 100% for total dissolved solids (>80%), turbidity (>94%), and color (>90%). Sensitivity analysis further revealed that coagulant dosage is the most critical factor governing process stability, emphasizing the need for precise control. This research provides a data-driven basis for implementing a sustainable, waste-derived treatment, giving confidence in scale-up and operational reliability.

  • Open Access

    Estimation of Groundwater Recharge in the Volcanic Aquifers in a Tropical Climate, Southwestern Ethiopia: Insights from Water Table Fluctuation and Chloride Mass Balance Methods

    by Adisu Befekadu Kebede, Fayera Gudu Tufa, Wagari Mosisa Kitessa, Beekan Gurmessa Gudeta, Seifu Kebede Debela, Alemu Yenehun, Fekadu Fufa Feyessa, Thomas Hermans, Kristine Walraevens

    The sustainable use and management of groundwater resources is a challenging issue due to population growth and climate change. Accurate quantification of groundwater recharge is a basic requirement for effective groundwater resource management, yet it is still lacking in many areas around the world. The study was designed to estimate recharge to groundwater from natural rainfall in the Gilgel Gibe and Dhidhessa catchments in southwestern Ethiopia, employing the water table fluctuation (WTF) and chloride mass balance (CMB) techniques. These methods are being applied for the first time in the study area and have not previously been used in these catchments. Given the region’s data scarcity, a community-based data collection program was implemented and supplemented with additional field measurements and secondary data sources. Groundwater level, spring discharge, and rainfall were monitored over the 2022/2023 hydrological year. Groundwater level fluctuations were found to be influenced by topography and rainfall patterns, reaching 8.2 m in amplitude in the upstream part of the catchments. Chloride concentrations were determined in groundwater samples collected from hand-dug wells and springs, and rainwater was also collected. Rainwater exhibited a mean chloride concentration of 2.46 mg/L, while groundwater chloride concentrations ranged from 3 mg/L to 36.99 mg/L. The estimated recharge rates varied spatially, ranging from 170 to 850 mm/year using the CMB method (11% to 55% of annual rainfall, mean recharge rate of 454 mm/year) and from 76 to 796 mm/year using the WTF method (4% to 43% of annual rainfall, mean recharge rate of 439 mm/year). Notably, recharge estimates were lowest downstream in the lowland areas and highest upstream in the highland regions. Rainfall amount, local lithology, and topography were identified as major influences on groundwater recharge across the study area. Both CMB and WTF methods were deemed applicable in the volcanic aquifers, provided that all the respective assumptions are followed. This study significantly contributes to the groundwater dataset for the region, in addition to recharge estimation and the research conclusions, emphasizing the importance of long-term monitoring and time series analysis of chloride data to reduce uncertainties. The work serves as a valuable reference for researchers, policymakers, and regional water resource managers.


  • Open Access

    Hydrogeochemical Characterization and Processes Controlling Groundwater Chemistry of Complex Volcanic Rock of Jimma Area, Ethiopia

    by Wagari Mosisa Kitessa, Adisu Befekadu Kebede, Fayera Gudu Tufa, Beekan Gurmessa Gudeta, Alemu Yenehun, Bekan Chelkeba, Seifu Kebede Debela, Fekadu Fufa Feyessa, Kristine Walraevens

    The sustainable management of groundwater in the Jimma area is complicated by a lack of comprehensive studies on its chemical makeup and the geochemical processes influencing its hydrochemistry. This research aims to fill that gap by examining 51 groundwater samples from various sources, including deep groundwaters, shallow groundwaters, hand-dug well groundwaters, surface waters, and springs within the area primarily consisting of complex volcanic rocks. The goal is to describe the hydrogeochemical characteristics and determine the key processes affecting groundwater composition in this volcanic area. The study identifies clear patterns in cation and anion concentrations. For deep groundwaters, the average cation concentration is ranked as Na+ > Ca2+ > Mg2+ > K+, while shallow groundwaters, hand-dug well groundwaters, surface waters, and springs show a ranking of Ca2+ > Na+ > Mg2+ > K+. The major anions are typically ordered as HCO3− > NO3− > Cl− > SO42−. The quantitative hydrogeochemical analysis indicates that the freshwater types in the region are primarily Ca-HCO3 and Ca-Mg-HCO3, with some highly mineralized Na-HCO₃ waters also detected. The weathering of silicate minerals mainly drives the geochemical processes affecting groundwater chemistry. An increase in mineralization, suggested by saturation indices, points to a longer residence time underground, with deep groundwaters exhibiting the highest saturation levels and springs the lowest. This mineralization is especially significant for Mg-silicates and carbonates. Stability diagrams for feldspar minerals further demonstrate groundwater evolution along flow paths, revealing that shallow systems are in equilibrium with minerals like gibbsite, whereas deeper systems achieve stability with albite, Ca-montmorillonite, and microcline. Higher CO2 levels (10−1.5 to 100.5 atm), likely from mantle-magma degassing, add more HCO3− to the deeper aquifers. This study offers the first thorough characterization of the groundwater composition in the Jimma area and provides important insights into the Jimma area’s hydrogeochemical development, establishing a basis for enhanced groundwater management within this intricate volcanic aquifer system.


  • Open Access

    Estimation of Groundwater Recharge in a Volcanic Aquifer System Using Soil Moisture Balance and Baseflow Separation Methods: The Case of Gilgel Gibe Catchment, Ethiopia

    by Fayera Gudu Tufa, Fekadu Fufa Feyissa, Adisu Befekadu Kebede, Beekan Gurmessa Gudeta, Wagari Mosisa Kitessa, Seifu Kebede Debela, Bekan Chelkeba Tumsa, Alemu Yenehun, Marc Van Camp, Kristine Walraevens

    Understanding the recharge–discharge system of a catchment is key to the efficient use and effective management of groundwater resources. The present study focused on the estimation of groundwater recharge using Soil Moisture Balance (SMB) and Baseflow Separation (BFS) methods in the Gilgel Gibe catchment where water demand for irrigation, domestic, and industrial purposes is dramatically increasing. The demand for groundwater and the existing ambitious plans to respond to this demand will put a strain on the groundwater resource in the catchment unless prompt intervention is undertaken to ensure its sustainability. Ground-based hydrometeorological 36-years data (1985 to 2020) from 17 stations and satellite products from CHIRPS and NASA/POWER were used for the SMB method. Six BFS methods were applied through the Web-based Hydrograph Analysis Tool (WHAT), SepHydro, BFLOW, and Automated Computer Programming (PART) to sub-catchments and the main catchment to estimate the groundwater recharge. The streamflow data (discharge) obtained from the Ministry of Water and Energy were the main input data for the BFS methods. The average annual recharge of groundwater was estimated to be 313 mm using SMB for the years 1985 to 2020 and 314 mm using BFS for the years 1986 to 2003. The results from the SMB method revealed geographical heterogeneity in annual groundwater recharge, varying from 209 to 442 mm. Significant spatial variation is also observed in the estimated annual groundwater recharge using the BFS methods, which varies from 181 to 411 mm for sub-catchments. Hydrogeological conditions of the catchment were observed, and the yielding capacity of existing wells was assessed to evaluate the validity of the results. The recharge values estimated using SMB and BFS methods are comparable and hydrologically reasonable. The findings remarkably provide insightful information for decision-makers to develop effective groundwater management strategies and to prioritize the sub-catchments for immediate intervention to ensure the sustainability of groundwater.


  • Open Access

    Biogas Production and Biofertilizer Estimation from Anaerobic Co‐Digestion of Blends of Wastewater and Microalgae

    by Wagari Mosisa Kitessa, Fekadu Fufa, Didha Abera

    The study aimed to investigate the enhancement of biogas production through anaerobic digestion from blends of wastewater and microalgae. The microalgae functioned as a co‐substrate. A series of laboratory‐scale batch anaerobic co‐digestion of the wastewater and microalgae were carried out under mesophilic conditions for 21 days. Biogas production rates from wastewater (WW) alone and different blends of WW and microalgae (MA) were analysed. In addition, the nutrient values and reduction in the volume of the WW after digestion were determined. The results show that the quantity and quality of biogas produced with different mix ratios of WW to MA (WW only, 3 : 1, and 3 : 2) were 24 mL CH 4 /g COD, 37 mL CH 4 /g COD, and 44 mL CH 4 /g COD, respectively. At the optimum mix ratio, the optimum methane produced was 44 mL CH 4 /g COD, which is much lower than volumes of gas STP conditions, which is 350 mL CH 4 /g COD. The values of TS, VS, and COD were also reduced by 43.11%, 40.09%, and 71.99% at the optimum mix ratio, respectively. The optimum mix ratio of 1732.77, 77.14, and 174.26 kg/year of urea, diammonium phosphate, and potash fertilizer, respectively, was obtained. The results indicate that biogas production can be improved through co‐digestion of WW and MA as a co‐substrate relatively, but to improve the production rate another substrate should be investigated. However, the result can be used as a supplementary investigation for practical application in energy production.