Kamel Lahssini has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Potentiel et défis du LiDAR spatial pour la cartographie multisource de la hauteur de la canopée dans les forêts tropicales

    by Kamel Lahssini

    Le programme REDD+ vise à réduire les émissions de carbone résultant de la dégradation des forêts et de la déforestation. Pour atteindre ses objectifs, une meilleure compréhension et caractérisation des forêts du monde entier, en particulier des forêts tropicales, sont nécessaires. Cette thèse de doctorat explore le potentiel et les défis du LiDAR spatial pour la cartographie multisource de la hauteur de la canopée à travers l'intégration de technologies de télédétection complémentaires pour améliorer l'estimation de la hauteur de la canopée dans les forêts tropicales. La hauteur de la canopée est un paramètre essentiel pour quantifier la biomasse et les stocks de carbone des forêts. Cette recherche est structurée en quatre études, chacune correspondant à un article scientifique, qui traitent collectivement de l'utilisation du LiDAR spatial et d'autres données de télédétection pour la cartographie de la hauteur de la canopée. La première étude porte sur la précision des estimations de la hauteur de la canopée obtenues à partir des données LiDAR Global Ecosystem Dynamics Investigation (GEDI) sur des forêts tropicales en Guyane Française (Amérique du Sud) et au Gabon (Afrique). Les résultats révèlent que des modèles de régression incorporant plusieurs métriques GEDI améliorent de manière significative la précision de l'estimation par rapport à l'utilisation d'une seule métrique de hauteur GEDI. Les paramètres physiques du signal tels que le type de faisceau et la sensibilité, qui affectent la pénétration du laser, sont identifiés comme des influences majeures sur la qualité des données GEDI. La deuxième étude étend l'analyse des estimations de la hauteur de la canopée à partir de GEDI aux forêts tropicales de l'île de Mayotte, caractérisées par des hauteurs de canopée modérées et un terrain escarpé. La pente du terrain a un impact significatif sur les mesures effectuées par GEDI et doit être prise en compte lorsque les données ont été acquises dans des zones escarpés. La prise en compte de la pente peut se faire par l'intégration d'informations sur le terrain dans les modèles de régression ou par la correction directe des effets de pente dans les formes d'onde GEDI. De plus, il apparaît que la capacité de pénétration du faisceau LiDAR dépend fortement des caractéristiques de la forêt, puisque la profondeur de pénétration du signal diffère selon le type de forêt. La troisième étude présente une carte complète de la hauteur de la canopée en Guyane Française à une résolution spatiale de 10 m, produite à partir d'une approche opérationnelle de fusion de données qui intègre des données optiques, radar et des sources de données environnementales auxiliaires. L'étude utilise un modèle de réseau de neurones U-Net calibré et validé à partir de données GEDI comme hauteurs de canopée de référence. L'intégration de descripteurs hydrologiques et géomorphologiques, tels que la hauteur au-dessus du drainage le plus proche et les types de paysages forestiers, améliore considérablement la précision du modèle. En outre, la prise en compte des incertitudes de la base de données GEDI par le filtrage des données pertinentes et la correction des erreurs de géolocalisation améliore davantage la performance de l'estimation de la hauteur de la canopée par U-Net. Dans la quatrième et dernière étude, la corrélation spatiale de cette carte de la hauteur de la canopée est analysée et des approches géostatistiques sont mises en œuvre pour améliorer les prédictions de la hauteur de la canopée. Cette analyse montre que les caractéristiques du capteur GEDI, en particulier le type de faisceau laser et le schéma d'échantillonnage au sol, introduisent dans les mesures des anisotropies induites par le capteur qui ne sont pas représentatives de la variabilité spatiale de la hauteur de canopée. La technique d'interpolation spatiale par krigeage des résidus prend en compte l'autocorrélation spatiale des hauteurs de la canopée et améliore la précision des estimations.

  • Open Access

    Canopy height mapping in French Guiana using multi-source satellite data and environmental information in a U-Net architecture

    by Kamel Lahssini, Nicolas Baghdadi, Guerric le Maire, Ibrahim Fayad, Ludovic Villard

    Canopy height is a key indicator of tropical forest structure. In this study, we present a deep learning application to map canopy height in French Guiana using freely available multi-source satellite data (optical and radar) and complementary environmental information. The potential of a U-Net architecture trained on sparse and unevenly distributed GEDI data to generate a continuous canopy height map at a regional scale was assessed. The developed model, named CHNET, successfully produced a canopy height map of French Guiana at a 10-m spatial resolution, achieving relatively good accuracy compared to a validation airborne LiDAR scanning (ALS) dataset. The study demonstrates that relevant environmental descriptors, namely, height above nearest drainage (HAND) and forest landscape types (FLT), significantly contribute to the model’s accuracy, highlighting that these descriptors bring important information on canopy structural properties and that the CHNET framework can efficiently use this information to improve canopy height prediction. Another critical aspect highlighted is the necessity of addressing GEDI data inaccuracies and geolocation uncertainties, which is essential for any GEDI-based application. However, challenges remain, particularly in characterizing tall canopies, as our CHNET model exhibits a tendency to underestimate canopy heights greater than 35 m. A large part of this error arises from the use of GEDI measurements as reference, given the fact these data exhibit certain saturation in tropical biomes. Future improvements in the analysis of GEDI signal as well as the implementation of robust models are essential for better characterization of dense and tall tropical forest ecosystems.


  • Open Access

    Enhancing Forest Attribute Prediction by Considering Terrain and Scan Angles From Lidar Point Clouds: A Neural Network Approach

    by Karun R. Dayal, Sylvie Durrieu, Kamel Lahssini, Dino Ienco, Jean-Matthieu Monnet

    Sensitivity of lidar metrics to scan angle can affect the robustness of area-based approach (ABA) models, and modelling the interplay of scan geometry and terrain properties can be complex. The study hypothesizes that neural networks can manage the interplay of lidar acquisition parameters, terrain properties, and vegetation characteristics to improve ABA models. The study area is in Massif des Bauges Natural Regional Park, eastern France, comprising 291 field plots in a mountainous environment with broadleaf, coniferous, and mixed forest types. Field plots were scanned with a high overlap from multiple flight lines and the corresponding point clouds were considered independently to expand the standard ABA dataset (291 observations) to create a dataset containing 1095 independent observations. Computation of lidar, terrain, and scan angle metrics for each point cloud associated each observation in the expanded dataset with the scan information in addition to the lidar and terrain information. A multilayer perceptron (MLP) was used to model basal area and total volume to compare the predictions resulting from standard and expanded ABA datasets. With expanded datasets containing lidar, terrain, and scan information, the R 2 for the median predictions per plot were higher (R 2 of 0.83 and 0.85 for BA and V tot ) than predictions with standard datasets (R 2 of 0.66( BA ) and 0.71( V tot )) containing only lidar metrics. It also outperformed an MLP model for a dataset with lidar and terrain information [R 2 of 0.77( BA and V tot )]. The MLP performed better than Random forest regression, which could not sufficiently exploit additional terrain and scan information.


  • Open Access

    Enhancing forest attribute prediction by considering terrain and scan angles from Lidar point clouds: a neural network approach

    by Karun Dayal, Sylvie Durrieu, Kamel Lahssini, Dino Ienco, Jean-Matthieu Monnet

    Sensitivity of lidar metrics to scan angle can affect the robustness of area-based approach (ABA) models, and modelling the interplay of scan geometry and terrain properties can be complex. The study hypothesises that neural networks can manage the interplay of lidar acquisition parameters, terrain properties, and vegetation characteristics to improve ABA models. The study area is in Massif des Bauges Natural Regional Park, eastern France, comprising 291 field plots in a mountainous environment with broadleaf, coniferous, and mixed forest types. Field plots were scanned with a high overlap from multiple flight lines and the corresponding point clouds were considered independently to expand the standard ABA dataset (291 observations) to create a dataset containing 1095 independent observations. Computation of lidar, terrain and scan metrics for each point cloud associated each observation in the expanded dataset with the scan information in addition to the lidar and terrain information. A multilayer perceptron (MLP) was used to model basal area and total volume to compare the predictions resulting from standard and expanded ABA datasets. With expanded datasets containing lidar, terrain and scan information, the R² for the median predictions per plot were higher (R² of 0.83 and 0.85 for BA and V tot ) than predictions with standard datasets(R² of 0.66(BA) and 0.71( V tot )) containing only lidar metrics. It also outperformed an MLP model for a dataset with lidar and terrain information (R² of 0.77 ( BA and V tot )). The MLP performed better than RF regression, which could not sufficiently exploit additional terrain and scan information.

  • Open Access

    Influence of GEDI Acquisition and Processing Parameters on Canopy Height Estimates over Tropical Forests

    by Kamel Lahssini, Nicolas Baghdadi, Guerric le Maire, Ibrahim Fayad

    LiDAR technology has been widely used to characterize structural parameters of forest ecosystems, which in turn are valuable information for forest monitoring. GEDI is a spaceborne LiDAR system specifically designed to measure vegetation’s vertical structure, and it has been acquiring waveforms on a global scale since April 2019. In particular, canopy height is an important descriptor of forest ecosystems, as it allows for quantifying biomass and other inventory information. This paper analyzes the accuracy of canopy height estimates from GEDI data over tropical forests in French Guiana and Gabon. The influence of various signal acquisition and processing parameters is assessed to highlight how they impact the estimation of canopy heights. Canopy height models derived from airborne LiDAR data are used as reference heights. Several linear and non-linear approaches are tested given the richness of the available GEDI information. The results show that the use of regression models built on multiple GEDI metrics allows for reaching improved accuracies compared to a direct estimation from a single GEDI height metric. In a notable way, random forest improves the canopy height estimation accuracy by almost 80% (in terms of RMSE) compared to the use of rh_95 as a direct proxy of canopy height. Additionally, convolutional neural networks calibrated on GEDI waveforms exhibit similar results to the ones of other regression models. Beam type as well as beam sensitivity, which are related to laser penetration, appear as parameters of major influence on the data derived from GEDI waveforms and used as input for canopy height estimation. Therefore, we recommend the use of only power and high-sensitivity beams when sufficient data are available. Finally, we note that regression models trained on reference data can be transferred across study sites that share identical environmental conditions.


  • Open Access

    An Assessment of the GEDI Lasers’ Capabilities in Detecting Canopy Tops and Their Penetration in a Densely Vegetated, Tropical Area

    by Ibrahim Fayad, Nicolas Baghdadi, Kamel Lahssini

    The Global Ecosystem Dynamics Investigation (GEDI), specifically designed to measure vertical forest structures, has acquired, since April 2019, more than 35 billion waveforms of Earth’s surface on a nearly global scale. GEDI is equipped with 3 identical 1064 nm lasers with a power of 10 mJ per shot, where 1 laser is split into 2 lasers, resulting in two 5 mJ coverage lasers and two 10 mJ full-power lasers. In this study, we evaluate the potential of GEDI’s four lasers to penetrate through canopies and detect the ground, and their capabilities to detect the top of the canopies over a tropical forest (in French Guiana) characterized by a dense canopy cover and tall trees. The accurate detection of both of these surfaces is the first step in characterizing vertical forest structures. The SRTM Digital Elevation Model (DEM) is used as a reference point for elevations while a canopy height model (CHM), derived from airborne and spaceborne LiDAR data, is used as a reference for canopy heights. In addition, the ground and canopy-top elevations estimated from NASA’s Land, Vegetation, and Ice Sensor (LVIS, 1064 nm full-waveform LiDAR, 5 mJ per shot, ~8 km altitude) are used as a benchmark for comparison with GEDI’s lasers. Results indicate that GEDI’s coverage and full-power lasers, even after the application of a preliminary filter that removes around 50% of acquisitions, tend to underestimate tree heights in densely vegetated, tall forests. Moreover, GEDI’s coverage lasers also exhibited a lower level of performance in comparison to both the full-power lasers and LVIS. Overall, the average estimated maximum canopy heights (RH100) for a CHM greater than 30 m was 24.4 m with the coverage lasers, 32.1 m with the full-power lasers, and 36.7 m with LVIS. The analysis of shots with high-beam sensitivity (sensitivity ≥ 98%) showed that they tend to have a better probability of reaching the ground and have better detection of canopy tops for both GEDI laser types. Nonetheless, GEDI’s coverage lasers still showed an underestimation of canopy heights with an average RH100 of 29.8 m, while for GEDI’s full-power lasers and LVIS, the average RH100 was 35.2 m and 37.7 m, respectively. Finally, the assessment of the acquisition time on the detection of the ground return and the top of the canopies showed that, for the coverage lasers, solar noise could affect the detection of the ground return as acquisitions made during early mornings or late afternoons have more penetration than shots acquired between 8 a.m. and 4 p.m. The effect of acquisition time on the detection of the tops of canopies showed that solar noise slightly affected the coverage lasers. Regarding the full-power lasers, the acquisition time of the shots seem to affect neither the penetration of the lasers, nor the detection of the tops of canopies.


  • Joint Use of Airborne LiDAR Metrics and Topography Information to Estimate Forest Parameters via Neural Networks

    by Kamel Lahssini, Karun Reuel Dayal, Sylvie Durrieu, Jean-Matthieu Monnet

    Forest ecosystems play a fundamental role in natural balances and climate mechanisms through their contribution to global carbon storage. They also represent important reservoirs of biodiversity. The sustainable management and conservation of forest resources is, therefore, crucial in the current context of global warming and biodiversity loss. To tackle such challenges, earth observation data has been identified as a valuable source of information capable to provide stakeholders with informative indicators to support the decision making process related to forest ecosystems management. In particular, LiDAR remote sensing has proven to be a powerful tool for the characterization of structural properties of forest ecosystems, which in turn are valuable information for their monitoring. To deal with this particular issue in the context of simultaneous forest variables estimation in a multi-output regression setting, we propose a deep learning based strategy to combine together information coming from metrics derived from high density 3D-point clouds acquired by airborne laser scanning (ALS) and topography descriptors extracted from the same source. The performance of our framework is evaluated on two stand-level forest variables of interest: Total Volume (referring to total wood volume) and Basal Area. It is compared to KNN and Random Forest (RF) algorithms, and also to a single-output version of our framework. As a result, the proposed multi-output framework performed better than KNN and RF and achieved a R2 value of 0.72 and 0.73 for Total Volume and Basal Area, respectively. The obtained results are similar to those obtained when running two single-output deep learning frameworks and underline that the availability of additional topography descriptors to enrich the information provided by standard LiDAR-derived metrics brings interesting performance improvements in the estimation of both forest variables of interest.


  • Open Access

    Combining LiDAR Metrics and Sentinel-2 Imagery to Estimate Basal Area and Wood Volume in Complex Forest Environment via Neural Networks

    by Kamel Lahssini, Florian Teste, Karun Reuel Dayal, Sylvie Durrieu, Dino Ienco, Jean-Matthieu Monnet

    Forest ecosystems play a fundamental role in natural balances and climate mechanisms through their contribution to global carbon storage. Their sustainable management and conservation is crucial in the current context of global warming and biodiversity conservation. To tackle such challenges, earth observation data have been identified as a valuable source of information. While earth observation data constitute an unprecedented opportunity to monitor forest ecosystems, its effective exploitation still poses serious challenges since multimodal information needs to be combined to describe complex natural phenomena. To deal with this particular issue in the context of structure and biophysical variables estimation for forest characterization, we propose a new deep learning-based fusion strategy to combine together high density three-dimensional (3-D) point clouds acquired by airborne laser scanning with high-resolution optical imagery. In order to manage and fully exploit the available multimodal information, we implement a two-branch late fusion deep learning architecture taking advantage of the specificity of each modality. On the one hand, a 2-D CNN branch is devoted to the analysis of Sentinel-2 time series data, and on the other hand, a multilayer perceptron branch is dedicated to the processing of LiDAR-derived information. The performance of our framework is evaluated on two forest variables of interest: total volume and basal area at stand level. The obtained results underline that the availability of multimodal remote sensing data is not a direct synonym of performance improvements but, the way in which they are combined together is of paramount importance.