Sivaprakash Srinivasan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sivaprakash Srinivasan has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Shirish Hari Sonawane
Department of Chemical Engineering National Institute of Technology Warangal Warangal India
4 shared publications - Avinash Sonawane
Department of Biosciences and Biomedical Engineering, Indian Institute of Technology Indore, Simrol, India
3 shared publications - Maksim I. Sulatsky
Laboratory of Biomedical Nanotechnologies, Institute of Cytology of the Russian Academy of Sciences (RAS), 194064 Saint Petersburg, Russia
3 shared publications - Natalia Yudintceva
Institute of Cytology of the Russian Academy of Sciences
3 shared publications - Viacheslav Fedorov
Institute of Cytology of the Russian Academy of Sciences
3 shared publications Kahan Bhadani
2 shared publications
Latest Publications
- 30 October 2026
- Published by Wiley in Polymer Engineering & Science
An Approach to Predict Thermal Degradation Characteristics of Ethylene Propylene Diene Monomer and Rocasin Elastomers Under Extreme Heating Rate for High‐Temperature Insulation Application
The thermal degradation behavior of EPDM and Rocasin elastomers at heating rates far exceeding the capability of conventional thermogravimetric analysis (TGA; limited to approximately 200°C/min) remains poorly characterized, despite the critical role of these materials in rocket motor insulation, cable sheathing, and high‐temperature sealing applications. This study addresses that gap by deriving thermal degradation kinetics from TGA experiments at β = 10–150°C/min under a nitrogen atmosphere and extending the validated models to simulate degradation behavior at extreme heating rates of 500–2000°C/min, mainly for rocket motor applications. In this study, EPDM and Rocasin elastomers are heated to 1000°C at different heating rates from 10 to 150°C/min. The degradation mechanisms across various temperature ranges were studied along with the kinetic models to elucidate the kinetic parameters. The degradation pattern of the materials was simulated and compared with the data within the limits of TGA. Furthermore, these parameters were used to construct a preliminary kinetic‐extrapolation framework for predicting degradation behavior beyond the limits of conventional TGA, which may serve as input for subsequent coupled transient heat transfer and ablation modeling of insulation systems.
- 30 October 2026
- Published by Wiley in Polymer Engineering & Science
An Approach to Predict Thermal Degradation Characteristics of Ethylene Propylene Diene Monomer and Rocasin Elastomers Under Extreme Heating Rate for High‐Temperature Insulation Application
The thermal degradation behavior of EPDM and Rocasin elastomers at heating rates far exceeding the capability of conventional thermogravimetric analysis (TGA; limited to approximately 200°C/min) remains poorly characterized, despite the critical role of these materials in rocket motor insulation, cable sheathing, and high‐temperature sealing applications. This study addresses that gap by deriving thermal degradation kinetics from TGA experiments at β = 10–150°C/min under a nitrogen atmosphere and extending the validated models to simulate degradation behavior at extreme heating rates of 500–2000°C/min, mainly for rocket motor applications. In this study, EPDM and Rocasin elastomers are heated to 1000°C at different heating rates from 10 to 150°C/min. The degradation mechanisms across various temperature ranges were studied along with the kinetic models to elucidate the kinetic parameters. The degradation pattern of the materials was simulated and compared with the data within the limits of TGA. Furthermore, these parameters were used to construct a preliminary kinetic‐extrapolation framework for predicting degradation behavior beyond the limits of conventional TGA, which may serve as input for subsequent coupled transient heat transfer and ablation modeling of insulation systems.
- Open Access
- 14 June 2026
- Published by Elsevier in SSRN Electronic Journal
A process intensified approach for continuous production of polymeric nanospheres for potential in drug delivery application
Polymeric nanospheres with narrow size distribution and composition are attractive building blocks for advanced nanomedicine applications, particularly in targeted drug delivery. This work report a continuous and controllable strategy for the synthesis of polymeric nanospheres (PNSs) based on the integration of ultrasound-assisted emulsification with a flow reactor system. Ultrasound irradiation enables the formation of a stable and homogeneous nanoemulsion, while the flow reactor ensures precise control over polymerization conditions. Systematic optimization of key parameters, including temperature, residence time, and monomer concentration, yields narrowly dispersed PNSs with tunable physicochemical properties. The resulting nanospheres were characterized by transmission electron microscopy (TEM) and dynamic light scattering (DLS), confirming their uniform size distribution and well-defined morphology. Furthermore, the PNSs were successfully functionalized with FITC-conjugated monoclonal antibodies targeting plasma membrane-bound Hsp70, generating anti-mHsp70-FITC-mAbs@PNSs. This functionalization tested on mHsp70-positive glioma C6 cells demonstrates the suitability of the platform for bioconjugation and targeted delivery applications. Overall, this study highlights a process intensified approach on ultrasound-assisted continuous flow reactor based synthesis as a scalable and versatile approach for producing functional PNSs for biomedical and drug delivery applications.
- 14 June 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessA process intensified approach for continuous production of polymeric nanospheres for potential in drug delivery application
Polymeric nanospheres with narrow size distribution and composition are attractive building blocks for advanced nanomedicine applications, particularly in targeted drug delivery. This work report a continuous and controllable strategy for the synthesis of polymeric nanospheres (PNSs) based on the integration of ultrasound-assisted emulsification with a flow reactor system. Ultrasound irradiation enables the formation of a stable and homogeneous nanoemulsion, while the flow reactor ensures precise control over polymerization conditions. Systematic optimization of key parameters, including temperature, residence time, and monomer concentration, yields narrowly dispersed PNSs with tunable physicochemical properties. The resulting nanospheres were characterized by transmission electron microscopy (TEM) and dynamic light scattering (DLS), confirming their uniform size distribution and well-defined morphology. Furthermore, the PNSs were successfully functionalized with FITC-conjugated monoclonal antibodies targeting plasma membrane-bound Hsp70, generating anti-mHsp70-FITC-mAbs@PNSs. This functionalization tested on mHsp70-positive glioma C6 cells demonstrates the suitability of the platform for bioconjugation and targeted delivery applications. Overall, this study highlights a process intensified approach on ultrasound-assisted continuous flow reactor based synthesis as a scalable and versatile approach for producing functional PNSs for biomedical and drug delivery applications.
- Open Access
- 27 April 2026
- Published by Elsevier in SSRN Electronic Journal
A process intensified approach for continuous production of polymeric nanospheres for potential in drug delivery application
Polymeric nanospheres with narrow size distribution and composition are attractive building blocks for advanced nanomedicine applications, particularly in targeted drug delivery. This work report a continuous and controllable strategy for the synthesis of polymeric nanospheres (PNSs) based on the integration of ultrasound-assisted emulsification with a flow reactor system. Ultrasound irradiation enables the formation of a stable and homogeneous nanoemulsion, while the flow reactor ensures precise control over polymerization conditions. Systematic optimization of key parameters, including temperature, residence time, and monomer concentration, yields narrowly dispersed PNSs with tunable physicochemical properties. The resulting nanospheres were characterized by transmission electron microscopy (TEM) and dynamic light scattering (DLS), confirming their uniform size distribution and well-defined morphology. Furthermore, the PNSs were successfully functionalized with FITC-conjugated monoclonal antibodies targeting plasma membrane-bound Hsp70, generating anti-mHsp70-FITC-mAbs@PNSs. This functionalization tested on mHsp70-positive glioma C6 cells demonstrates the suitability of the platform for bioconjugation and targeted delivery applications. Overall, this study highlights a process intensified approach on ultrasound-assisted continuous flow reactor based synthesis as a scalable and versatile approach for producing functional PNSs for biomedical and drug delivery applications.
- 27 April 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessA process intensified approach for continuous production of polymeric nanospheres for potential in drug delivery application
Polymeric nanospheres with narrow size distribution and composition are attractive building blocks for advanced nanomedicine applications, particularly in targeted drug delivery. This work report a continuous and controllable strategy for the synthesis of polymeric nanospheres (PNSs) based on the integration of ultrasound-assisted emulsification with a flow reactor system. Ultrasound irradiation enables the formation of a stable and homogeneous nanoemulsion, while the flow reactor ensures precise control over polymerization conditions. Systematic optimization of key parameters, including temperature, residence time, and monomer concentration, yields narrowly dispersed PNSs with tunable physicochemical properties. The resulting nanospheres were characterized by transmission electron microscopy (TEM) and dynamic light scattering (DLS), confirming their uniform size distribution and well-defined morphology. Furthermore, the PNSs were successfully functionalized with FITC-conjugated monoclonal antibodies targeting plasma membrane-bound Hsp70, generating anti-mHsp70-FITC-mAbs@PNSs. This functionalization tested on mHsp70-positive glioma C6 cells demonstrates the suitability of the platform for bioconjugation and targeted delivery applications. Overall, this study highlights a process intensified approach on ultrasound-assisted continuous flow reactor based synthesis as a scalable and versatile approach for producing functional PNSs for biomedical and drug delivery applications.
- 4 July 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 142 (38)
Synergistic Effects of NiZIF67/GO Fillers on Water Vapor Transmission Rate of Waterborne Polyurethane Composite Films
In this study, we investigated the potential of nickel and cobalt‐based Zeolitic Imidazolate framework (ZIF) NiZIF67 with graphene oxide (GO) composite fillers to reduce water vapor transmission rate (WVTR) in waterborne polyurethane (WPU) films. The NiZIF67/GO composite fillers were synthesized and characterized using various techniques like FESEM, XRD, and FTIR. These fillers were then incorporated into a WPU matrix to create composite films. The results suggest that the inter and intramolecular interactions within the NiZIF67/GO fillers effectively hinder water vapor permeation, leading to a significant decrease in WVTR compared to pristine WPU films. Furthermore, differential scanning calorimetry (DSC) analysis revealed an increase in both glass transition temperature (T g) and melting temperature (T m) with increasing filler content, indicating improved thermal stability of the composite films. Thermogravimetric analysis (TGA) confirmed this enhanced thermal stability, showing a higher onset degradation temperature with increased filler concentration. Additionally, X‐ray diffraction (XRD) analysis revealed an increase in the amorphous nature of the films, suggesting strong interactions between the fillers and the WPU matrix. This research demonstrates a promising approach for developing high‐performance barrier membranes using NiZIF67/GO composite fillers in WPU matrices for various applications including packaging films for fuel cells and batteries, electronics and sensors, agricultural packaging of seeds and pesticides.
- 4 July 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 142 (38)
Synergistic Effects of NiZIF67/GO Fillers on Water Vapor Transmission Rate of Waterborne Polyurethane Composite Films
In this study, we investigated the potential of nickel and cobalt‐based Zeolitic Imidazolate framework (ZIF) NiZIF67 with graphene oxide (GO) composite fillers to reduce water vapor transmission rate (WVTR) in waterborne polyurethane (WPU) films. The NiZIF67/GO composite fillers were synthesized and characterized using various techniques like FESEM, XRD, and FTIR. These fillers were then incorporated into a WPU matrix to create composite films. The results suggest that the inter and intramolecular interactions within the NiZIF67/GO fillers effectively hinder water vapor permeation, leading to a significant decrease in WVTR compared to pristine WPU films. Furthermore, differential scanning calorimetry (DSC) analysis revealed an increase in both glass transition temperature (T g) and melting temperature (T m) with increasing filler content, indicating improved thermal stability of the composite films. Thermogravimetric analysis (TGA) confirmed this enhanced thermal stability, showing a higher onset degradation temperature with increased filler concentration. Additionally, X‐ray diffraction (XRD) analysis revealed an increase in the amorphous nature of the films, suggesting strong interactions between the fillers and the WPU matrix. This research demonstrates a promising approach for developing high‐performance barrier membranes using NiZIF67/GO composite fillers in WPU matrices for various applications including packaging films for fuel cells and batteries, electronics and sensors, agricultural packaging of seeds and pesticides.
- Open Access
- 21 March 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (7)
A New Method for Accelerated Aging of Nanoparticles to Assess the Colloidal Stability of Albumin-Coated Magnetic Nanoparticles
The colloidal long-storage stability of nanosized drugs is a crucial factor for pharmacology, as they require much time for robust estimation. The application of bioavailable magnetic nanosuspensions in theranostics is limited by incomplete information about their colloidal stability in the internal media of human organisms. A method for the accelerated temperature stress “aging” of magnetic nanosized suspensions is proposed for the rapid assessment and prediction of the colloidal stability over time of nanosized iron oxide suspensions stabilized by albumin HSA. Colloidal stability is assessed using dynamic light scattering (DLS), fluorescence spectroscopy, electrophoresis, and ion monitoring methods during short- and long-term storage. Rapid assessment is achieved by short high-temperature (70 °C) processing of carboxymethyl-dextran-coated nanosol in the presence of albumin. The role of albumin in the sustained stability of superparamagnetic iron oxide particles (SPIONs) was studied under conditions mimicking blood plasma (pH = 7.4) and endolysosomal cell compartments (pH = 5.5). According to the fluorescence quenching and DLS data, colloidal stability is ensured by the formation of an HSA corona on carboxymethyl-dextran-coated SPIONs and their process of clustering. In the presence of albumin, the colloidal stability of nanoparticles is shown to increase from 80 to 121 days at a storage temperature of 8 °C The prognostic shelf life of magnetic nanosol is estimated by calculating the Van’t Hoff’s relation for the rate of chemical reactions. The validity of using the Van’t Hoff’s rule is confirmed by the agreement of the calculated activation energy at 8 °C and 70 °C. The developed method of the accelerated aging of nanoparticles can not only be employed for the estimation of the shelf life of magnetic nanoparticles coated with HSA in vitro but also for assessing the stability of SPIONs applied in vivo.
- 21 March 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (7)
Open AccessA New Method for Accelerated Aging of Nanoparticles to Assess the Colloidal Stability of Albumin-Coated Magnetic Nanoparticles
The colloidal long-storage stability of nanosized drugs is a crucial factor for pharmacology, as they require much time for robust estimation. The application of bioavailable magnetic nanosuspensions in theranostics is limited by incomplete information about their colloidal stability in the internal media of human organisms. A method for the accelerated temperature stress “aging” of magnetic nanosized suspensions is proposed for the rapid assessment and prediction of the colloidal stability over time of nanosized iron oxide suspensions stabilized by albumin HSA. Colloidal stability is assessed using dynamic light scattering (DLS), fluorescence spectroscopy, electrophoresis, and ion monitoring methods during short- and long-term storage. Rapid assessment is achieved by short high-temperature (70 °C) processing of carboxymethyl-dextran-coated nanosol in the presence of albumin. The role of albumin in the sustained stability of superparamagnetic iron oxide particles (SPIONs) was studied under conditions mimicking blood plasma (pH = 7.4) and endolysosomal cell compartments (pH = 5.5). According to the fluorescence quenching and DLS data, colloidal stability is ensured by the formation of an HSA corona on carboxymethyl-dextran-coated SPIONs and their process of clustering. In the presence of albumin, the colloidal stability of nanoparticles is shown to increase from 80 to 121 days at a storage temperature of 8 °C The prognostic shelf life of magnetic nanosol is estimated by calculating the Van’t Hoff’s relation for the rate of chemical reactions. The validity of using the Van’t Hoff’s rule is confirmed by the agreement of the calculated activation energy at 8 °C and 70 °C. The developed method of the accelerated aging of nanoparticles can not only be employed for the estimation of the shelf life of magnetic nanoparticles coated with HSA in vitro but also for assessing the stability of SPIONs applied in vivo.
- 19 March 2025
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 64 (13) , 7035-7043
A Process-Intensified Approach for Large-Scale Manufacturing of Silver Nanowires Using a Continuous Flow Reactor: Experiments and Application
- 19 March 2025
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 64 (13) , 7035-7043
A Process-Intensified Approach for Large-Scale Manufacturing of Silver Nanowires Using a Continuous Flow Reactor: Experiments and Application
- 6 June 2022
- Published by Wiley in Polymer Composites
- Vol. 43 (10) , 6987-6997
Low‐temperature processable glass fiber reinforced aromatic diamine chain extended bismaleimide composites with improved mechanical properties
The synthesis of 4,4′‐bismaleimido diphenylmethane (BMIM) and modified BMIM by its chain extension using commercially available aromatic diamines like 4,4′‐diamino diphenyl methane (DDM), 4,4′‐diaminodiphenyl sulphone (DDS), and 4,4′‐diamine diphenyl ether (DDE) was done. The synthesized materials have been characterized for structural aspects using Fourier transform infrared spectroscopy (FTIR), differential scanning calorimeter (DSC) and thermogravimetric analysis (TGA). The structure of BMIM was confirmed due to the presence of specific bands at ~1400 and 1705 cm−1 responsible for CC and OCNCO groups, respectively. The reduction in the heat of fusion and enthalpy of curing for chain extended bismaleimides/modified BMIM shows the influence of the swivel group in diamine during curing. The curing window has broadened for BMIM_M and BMIM_E by ~40°C and narrowed for BMIM_S by ~100°C. The mechanical properties and the chemical resistance were studied for the composites made from the BMIM and modified BMIM based composites. Fiber‐enhanced modified bismaleimide resin has improved mechanical properties.
- 6 June 2022
- Published by Wiley in Polymer Composites
- Vol. 43 (10) , 6987-6997
Low‐temperature processable glass fiber reinforced aromatic diamine chain extended bismaleimide composites with improved mechanical properties
The synthesis of 4,4′‐bismaleimido diphenylmethane (BMIM) and modified BMIM by its chain extension using commercially available aromatic diamines like 4,4′‐diamino diphenyl methane (DDM), 4,4′‐diaminodiphenyl sulphone (DDS), and 4,4′‐diamine diphenyl ether (DDE) was done. The synthesized materials have been characterized for structural aspects using Fourier transform infrared spectroscopy (FTIR), differential scanning calorimeter (DSC) and thermogravimetric analysis (TGA). The structure of BMIM was confirmed due to the presence of specific bands at ~1400 and 1705 cm−1 responsible for CC and OCNCO groups, respectively. The reduction in the heat of fusion and enthalpy of curing for chain extended bismaleimides/modified BMIM shows the influence of the swivel group in diamine during curing. The curing window has broadened for BMIM_M and BMIM_E by ~40°C and narrowed for BMIM_S by ~100°C. The mechanical properties and the chemical resistance were studied for the composites made from the BMIM and modified BMIM based composites. Fiber‐enhanced modified bismaleimide resin has improved mechanical properties.