Yongming Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yongming Zhang has a total of 264 co-authors. Here are the top co-authors by number of shared publications:
- Wang Zhang Yuan
State Key Laboratory of Synergistic Chem-Bio Synthesis, Frontiers Science Center for Transformative Molecules, School of Chemistry and Chemical Engineering, Shanghai Jiao Tong University, No. 800 Dongchuan Rd., Minhang District, Shanghai 200240, China
25 shared publications - Feng Liu
School of Chemistry and Chemical Engineering Frontiers Science Center for Transformative Molecules Shanghai Key Laboratory of Electrical Insulation and Thermal Aging Shanghai Jiao Tong University Shanghai China
18 shared publications Yecheng Zou
10 shared publicationsHong Li
School of Chemistry and Chemical Engineering, Shanghai Jiao Tong University, Shanghai, China
9 shared publications- Supeng Pei
Faculty of Chemical Engineering and Energy Technology Shanghai Institute of Technology Shanghai 201418 P.R. China
8 shared publications - Ben Zhong Tang
The Hong Kong University of Science and Technology Clear Water Bay
7 shared publications
Latest Publications
- 5 November 2026
- Published by Wiley in Advanced Materials
Rigid Double‐Spiro‐Grid Polymer Regulates Donor Fibrillar Pre‐Assembly and Acceptor Interdiffusion in Layer‐by‐Layer Organic Solar Cells
Layer‐by‐layer (LBL) fabrication of organic solar cells (OSCs) decouples donor and acceptor deposition, which, however, induces difficulties in controlling donor crystallization and acceptor interdiffusion. Here, we introduce NPSG, a fully conjugated double‐spiro‐grid polymer, to regulate donor fibrillar pre‐assembly before acceptor deposition. Morphological results reveal that NPSG shifts D18 assembly from loosely associated aggregates toward pronounced fibrillar pre‐assemblies in solution. Molecular dynamics simulations further suggest that the rigid NPSG backbone provides multiple noncovalent interaction sites that favor anisotropic association between D18 chain segments. During film formation, these fibrillar precursors evolve into a coherent and solvent‐resistant donor framework, which moderates L8‐BO interdiffusion and promotes a vertically graded, double fibrillar heterojunction. The resulting morphology facilitates interfacial charge transfer, improves the balance of electron and hole transport, and suppresses nongeminate recombination. Consequently, the optimized D18+NPSG/L8‐BO devices achieve a power conversion efficiency (PCE) of 21.2%, with a certified value of 20.7%. This strategy also improves device reproducibility, processing tolerance, applicability across different donor/acceptor systems, and operational stability under maximum‐power‐point (MPP) tracking. These findings establish donor‐underlayer pre‐assembly regulation as an effective strategy for efficient and robust sequentially processed OSCs.
- 5 November 2026
- Published by Wiley in Advanced Materials
Rigid Double‐Spiro‐Grid Polymer Regulates Donor Fibrillar Pre‐Assembly and Acceptor Interdiffusion in Layer‐by‐Layer Organic Solar Cells
Layer‐by‐layer (LBL) fabrication of organic solar cells (OSCs) decouples donor and acceptor deposition, which, however, induces difficulties in controlling donor crystallization and acceptor interdiffusion. Here, we introduce NPSG, a fully conjugated double‐spiro‐grid polymer, to regulate donor fibrillar pre‐assembly before acceptor deposition. Morphological results reveal that NPSG shifts D18 assembly from loosely associated aggregates toward pronounced fibrillar pre‐assemblies in solution. Molecular dynamics simulations further suggest that the rigid NPSG backbone provides multiple noncovalent interaction sites that favor anisotropic association between D18 chain segments. During film formation, these fibrillar precursors evolve into a coherent and solvent‐resistant donor framework, which moderates L8‐BO interdiffusion and promotes a vertically graded, double fibrillar heterojunction. The resulting morphology facilitates interfacial charge transfer, improves the balance of electron and hole transport, and suppresses nongeminate recombination. Consequently, the optimized D18+NPSG/L8‐BO devices achieve a power conversion efficiency (PCE) of 21.2%, with a certified value of 20.7%. This strategy also improves device reproducibility, processing tolerance, applicability across different donor/acceptor systems, and operational stability under maximum‐power‐point (MPP) tracking. These findings establish donor‐underlayer pre‐assembly regulation as an effective strategy for efficient and robust sequentially processed OSCs.
- 28 August 2026
- Published by Elsevier in Renewable Energy
- Vol. 276
Correlation of mechanical properties with biaxial and triaxial durability in polymer electrolyte membranes
- 28 August 2026
- Published by Elsevier in Renewable Energy
- Vol. 276
Correlation of mechanical properties with biaxial and triaxial durability in polymer electrolyte membranes
- 5 August 2026
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 8 (16) , 14196-14206
Reconfiguring the Proton Transport Channels in Proton Exchange Membranes via Phytic Acid-Functionalized Graphene Oxide for Enhanced Performance
Precise regulation of the hydrophilic channels within perfluorosulfonic acid (PFSA) proton exchange membranes is critical for their performance. Here, we present a high-performance composite membrane in which phytic acid-functionalized graphene oxide (PhyGO) is introduced into the PFSA matrix to reconfigure the hydrophilic channels. At an optimal loading of 1 wt %, PhyGO nanosheets are well-dispersed in the PFSA matrix, and their phosphate groups establish an additional hydrogen-bonding network. This network bridges and reconfigures the original hydrophilic channels into more continuous pathways for proton transport. Consequently, the composite membranes exhibit enhanced proton conductivity (1.23 times at 80 °C), improved dimensional stability (0.94 times at 80 °C), suppressed hydrogen crossover (0.91 times), and increased power density (1.21 times) compared to pristine PFSA membranes. Furthermore, the composite membrane also demonstrates superior chemical durability, which is attributed to the combined hydrogen-barrier effect and radical-quenching ability of PhyGO nanosheets. In contrast, excessive PhyGO loading leads to severe filler aggregation, disrupting the continuity of proton transport channels and mechanical integrity, thus degrading the overall performance. This work demonstrates that employing functionalized 2D nanomaterials to reconstruct the hydrophilic proton-conducting pathways is an effective strategy for developing high-performance composite membranes.
- 5 August 2026
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 8 (16) , 14196-14206
Reconfiguring the Proton Transport Channels in Proton Exchange Membranes via Phytic Acid-Functionalized Graphene Oxide for Enhanced Performance
Precise regulation of the hydrophilic channels within perfluorosulfonic acid (PFSA) proton exchange membranes is critical for their performance. Here, we present a high-performance composite membrane in which phytic acid-functionalized graphene oxide (PhyGO) is introduced into the PFSA matrix to reconfigure the hydrophilic channels. At an optimal loading of 1 wt %, PhyGO nanosheets are well-dispersed in the PFSA matrix, and their phosphate groups establish an additional hydrogen-bonding network. This network bridges and reconfigures the original hydrophilic channels into more continuous pathways for proton transport. Consequently, the composite membranes exhibit enhanced proton conductivity (1.23 times at 80 °C), improved dimensional stability (0.94 times at 80 °C), suppressed hydrogen crossover (0.91 times), and increased power density (1.21 times) compared to pristine PFSA membranes. Furthermore, the composite membrane also demonstrates superior chemical durability, which is attributed to the combined hydrogen-barrier effect and radical-quenching ability of PhyGO nanosheets. In contrast, excessive PhyGO loading leads to severe filler aggregation, disrupting the continuity of proton transport channels and mechanical integrity, thus degrading the overall performance. This work demonstrates that employing functionalized 2D nanomaterials to reconstruct the hydrophilic proton-conducting pathways is an effective strategy for developing high-performance composite membranes.
- 16 March 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 17 (12) , 3476-3484
Viscoelasticity and Sol–Gel Transition via Multiscale Self-Assembled Nanostructures in Short-Side-Chain PFSA Dispersions
The morphology and property of the high-temperature proton exchange membranes (PEMs) based on short-side-chain perfluorosulfonic acid (SSC-PFSA) are determined by the polymer structure in dispersion during solution casting. In this work, by using rheological analysis and structural characterization techniques, including Cryo-transmission electron microscope (Cryo-TEM) and small-angle X-ray scattering (SAXS), the rheology and microstructure of SSC-PFSA dispersions were collectively studied to spotlight the concentration dependent viscoelasticity across a large scale from dilute solution to gelation. Initially, SSC-PFSA forms rod-like primary aggregates exhibiting a scaling exponent (0.63) that deviates from the theoretical values of 0.5 (for semidilute solutions). As the concentration increases, these primary aggregates assemble into secondary aggregates, where the viscosity-concentration relationship deviates from the predicted scaling behavior. Further increasing the concentration, the secondary aggregates interact to form a percolating network, leading to gelation. This new multiscale self-assembly mechanism elucidates the fundamental connections underlying the gelation process toward membrane formation. It provides the first comprehensive understanding of the nonequilibrium morphology evolution across multiple magnitudes of concentration and length scales and finds the origin of the physical properties for SSC-PFSA electrolyte membranes.
- 16 March 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 17 (12) , 3476-3484
Viscoelasticity and Sol–Gel Transition via Multiscale Self-Assembled Nanostructures in Short-Side-Chain PFSA Dispersions
The morphology and property of the high-temperature proton exchange membranes (PEMs) based on short-side-chain perfluorosulfonic acid (SSC-PFSA) are determined by the polymer structure in dispersion during solution casting. In this work, by using rheological analysis and structural characterization techniques, including Cryo-transmission electron microscope (Cryo-TEM) and small-angle X-ray scattering (SAXS), the rheology and microstructure of SSC-PFSA dispersions were collectively studied to spotlight the concentration dependent viscoelasticity across a large scale from dilute solution to gelation. Initially, SSC-PFSA forms rod-like primary aggregates exhibiting a scaling exponent (0.63) that deviates from the theoretical values of 0.5 (for semidilute solutions). As the concentration increases, these primary aggregates assemble into secondary aggregates, where the viscosity-concentration relationship deviates from the predicted scaling behavior. Further increasing the concentration, the secondary aggregates interact to form a percolating network, leading to gelation. This new multiscale self-assembly mechanism elucidates the fundamental connections underlying the gelation process toward membrane formation. It provides the first comprehensive understanding of the nonequilibrium morphology evolution across multiple magnitudes of concentration and length scales and finds the origin of the physical properties for SSC-PFSA electrolyte membranes.
- 13 May 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 13 (24) , 12451-12459
Enhancing small-area and module device performance in organic photovoltaics through insulating polymer-induced manipulation of active layer morphology
Insulating polymers provide an effective and cost-efficient strategy to enhance organic solar cell (OSC) performance while demonstrating potential for commercial applications. In this study, we systematically explore the incorporation of insulating polymers into the active layer of OSCs, with a particular focus on the effects of polystyrene (PS) on the performance of PM6:Y6BO-based devices. The findings indicate that the addition of PS optimizes phase separation and crystallinity within the active layer, significantly improves exciton separation and charge transport efficiencies, and reduces carrier recombination. In terms of device performance, the addition of PS enhances the short-circuit current density (Jsc) and fill factor (FF), resulting in a notable increase in power conversion efficiency (PCE) from 16.6% to 17.3% for the PM6:Y6BO system. To validate the method's scalability, PS was also incorporated into large-area module devices (17.6 cm2), where a 0.1 mg ml−1 PS addition boosted module efficiency to 15.8%. These findings underscore the crucial role of insulating polymers in manipulating the morphology of the photovoltaic active layer and provide support for their application in the development of high-performance organic solar cell module devices.
- 13 May 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 13 (24) , 12451-12459
Enhancing small-area and module device performance in organic photovoltaics through insulating polymer-induced manipulation of active layer morphology
Insulating polymers provide an effective and cost-efficient strategy to enhance organic solar cell (OSC) performance while demonstrating potential for commercial applications. In this study, we systematically explore the incorporation of insulating polymers into the active layer of OSCs, with a particular focus on the effects of polystyrene (PS) on the performance of PM6:Y6BO-based devices. The findings indicate that the addition of PS optimizes phase separation and crystallinity within the active layer, significantly improves exciton separation and charge transport efficiencies, and reduces carrier recombination. In terms of device performance, the addition of PS enhances the short-circuit current density (Jsc) and fill factor (FF), resulting in a notable increase in power conversion efficiency (PCE) from 16.6% to 17.3% for the PM6:Y6BO system. To validate the method's scalability, PS was also incorporated into large-area module devices (17.6 cm2), where a 0.1 mg ml−1 PS addition boosted module efficiency to 15.8%. These findings underscore the crucial role of insulating polymers in manipulating the morphology of the photovoltaic active layer and provide support for their application in the development of high-performance organic solar cell module devices.
- 17 January 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 103, 111-118
Manganese (Ⅱ)-genistein complex as an efficient radical scavenger for fuel cells and investigation of its antioxidation mechanism
- 17 January 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 103, 111-118
Manganese (Ⅱ)-genistein complex as an efficient radical scavenger for fuel cells and investigation of its antioxidation mechanism
- 15 October 2024
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 91, 310-320
A new insight into the relationship of interface phase between aqueous phase and solid phase on gas permeability below glass transition temperature
- 15 October 2024
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 91, 310-320
A new insight into the relationship of interface phase between aqueous phase and solid phase on gas permeability below glass transition temperature
- Open Access
- 15 August 2024
- Published by Wiley in Advanced Science
- Vol. 11 (39) , e2403647
Transport‐Friendly Microstructure in SSC‐MEA: Unveiling the SSC Ionomer‐Based Membrane Electrode Assemblies for Enhanced Fuel Cell Performance
The significant role of the cathodic binder in modulating mass transport within the catalyst layer (CL) of fuel cells is essential for optimizing cell performance. This investigation focuses on enhancing the membrane electrode assembly (MEA) through the utilization of a short‐side‐chain perfluoro‐sulfonic acid (SSC‐PFSA) ionomer as the cathode binder, referred to as SSC‐MEA. This study meticulously visualizes the distinctive interpenetrating networks of ionomers and catalysts, and explicitly clarifies the triple‐phase interface, unveiling the transport‐friendly microstructure and transport mechanisms inherent in SSC‐MEA. The SSC‐MEA exhibits advantageous microstructural features, including a better‐connected ionomer network and well‐organized hierarchical porous structure, culminating in superior mass transfer properties. Relative to the MEA bonded by long‐side‐chain perfluoro‐sulfonic acid (LSC‐PFSA) ionomer, noted as LSC‐MEA, SSC‐MEA exhibits a notable peak power density (1.23 W cm−2), efficient O2 transport, and remarkable proton conductivity (65% improvement) at 65 °C and 70% relativity humidity (RH). These findings establish crucial insights into the intricate morphology‐transport‐performance relationship in the CL, thereby providing strategic guidance for developing highly efficient MEA.
- 15 August 2024
- Published by Wiley in Advanced Science
- Vol. 11 (39) , e2403647
Open AccessTransport‐Friendly Microstructure in SSC‐MEA: Unveiling the SSC Ionomer‐Based Membrane Electrode Assemblies for Enhanced Fuel Cell Performance
The significant role of the cathodic binder in modulating mass transport within the catalyst layer (CL) of fuel cells is essential for optimizing cell performance. This investigation focuses on enhancing the membrane electrode assembly (MEA) through the utilization of a short‐side‐chain perfluoro‐sulfonic acid (SSC‐PFSA) ionomer as the cathode binder, referred to as SSC‐MEA. This study meticulously visualizes the distinctive interpenetrating networks of ionomers and catalysts, and explicitly clarifies the triple‐phase interface, unveiling the transport‐friendly microstructure and transport mechanisms inherent in SSC‐MEA. The SSC‐MEA exhibits advantageous microstructural features, including a better‐connected ionomer network and well‐organized hierarchical porous structure, culminating in superior mass transfer properties. Relative to the MEA bonded by long‐side‐chain perfluoro‐sulfonic acid (LSC‐PFSA) ionomer, noted as LSC‐MEA, SSC‐MEA exhibits a notable peak power density (1.23 W cm−2), efficient O2 transport, and remarkable proton conductivity (65% improvement) at 65 °C and 70% relativity humidity (RH). These findings establish crucial insights into the intricate morphology‐transport‐performance relationship in the CL, thereby providing strategic guidance for developing highly efficient MEA.