Zaisheng Jiang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Zaisheng Jiang has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
- Dongdong Chen
School of Energy and Mining Engineering, China University of Mining and Technology-Beijing, Beijing, China
8 shared publications - Shengrong Xie
School of Energy and Mining Engineering, China University of Mining and Technology-Beijing, Beijing, China
8 shared publications Shengrong Xie
School of Energy and Mining Engineering, China University of Mining and Technology-Beijing, Beijing, China
3 shared publicationsDongdong Chen
School of Energy and Mining Engineering, China University of Mining and Technology-Beijing, Beijing, China
2 shared publications- Dongdong Chen
School of Energy and Mining Engineering, China University of Mining and Technology-Beijing, Beijing 100083, China
2 shared publications - En Wang
School of Mine Safety, North China Institute of Science and Technology, Langfang 065201, China
2 shared publications
Latest Publications
- Open Access
- 10 November 2026
- Published by Springer Nature in Scientific Reports
Coal mine drill pipe detection algorithm integrating large-kernel separation and coordinate locking mechanisms
- 10 November 2026
- Published by Springer Nature in Scientific Reports
Open AccessCoal mine drill pipe detection algorithm integrating large-kernel separation and coordinate locking mechanisms
- 29 July 2026
- Published by Springer Nature in Journal of Mountain Science
- Vol. 23 (7) , 3356-3376
Stability analysis and asymmetric structure control for surrounding rock of deep dynamic pressure weak roadway
- 29 July 2026
- Published by Springer Nature in Journal of Mountain Science
- Vol. 23 (7) , 3356-3376
Stability analysis and asymmetric structure control for surrounding rock of deep dynamic pressure weak roadway
- Open Access
- 23 October 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (21) , 9694
Study on Surrounding Rock Control of Withdrawal Space in Fully Mechanized Caving Mining of a 19 m Extra-Thick Coal Seam
The section span of the withdrawal space of fully mechanized top coal caving in an extra-thick coal seam is large, and with the gradual withdrawal of the hydraulic support, a series of strong dynamic pressure disasters occur in the withdrawal space, and the difficulty of surrounding rock support control increases sharply. In order to study the control mechanism of surrounding rock in the final mining withdrawal space in detail and put forward a reasonable support technology scheme, taking the large-section withdrawal space of an 8309 fully mechanized caving face in an extra-thick coal seam of a mine as the research object—through the theoretical investigation of whether the key blocks of the main roof are stably hinged under varied stopping coal caving distances and fracture locations of the main roof—the reasonable and optimal stopping coal caving distances and roadway formation time are determined. Using numerical simulation and similar simulation methods, the vertical stress and the maximum shear stress research indicators were introduced to verify the accuracy of the theoretical analysis results. The results show the following: (1) The reasonable stopping coal caving span is 1~2 times the cycle weighting interval, the best stopping coal caving distance in this geological condition is 30 m, and the best fracture position of the main roof is located above the goaf. (2) The migration of overlying strata in the withdrawal space has obvious zoning characteristics, and the zoning is as follows: a stopping coal caving area, support area of the hydraulic support, withdrawal channel area, and stopping coal pillar area. (3) According to the zoning characteristics of overlying strata movement, the asymmetric zoning support control scheme of the withdrawal space is proposed. The field monitoring results show that the maximum roof subsidence in the withdrawal space is 151 mm, the maximum internal squeezing amount of the stopping coal pillar is 82 mm, and the supporting and anchoring effect of each partition in the withdrawal space is good. The set of partition asymmetric support control schemes has been successfully applied to field practice.
- 23 October 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (21) , 9694
Open AccessStudy on Surrounding Rock Control of Withdrawal Space in Fully Mechanized Caving Mining of a 19 m Extra-Thick Coal Seam
The section span of the withdrawal space of fully mechanized top coal caving in an extra-thick coal seam is large, and with the gradual withdrawal of the hydraulic support, a series of strong dynamic pressure disasters occur in the withdrawal space, and the difficulty of surrounding rock support control increases sharply. In order to study the control mechanism of surrounding rock in the final mining withdrawal space in detail and put forward a reasonable support technology scheme, taking the large-section withdrawal space of an 8309 fully mechanized caving face in an extra-thick coal seam of a mine as the research object—through the theoretical investigation of whether the key blocks of the main roof are stably hinged under varied stopping coal caving distances and fracture locations of the main roof—the reasonable and optimal stopping coal caving distances and roadway formation time are determined. Using numerical simulation and similar simulation methods, the vertical stress and the maximum shear stress research indicators were introduced to verify the accuracy of the theoretical analysis results. The results show the following: (1) The reasonable stopping coal caving span is 1~2 times the cycle weighting interval, the best stopping coal caving distance in this geological condition is 30 m, and the best fracture position of the main roof is located above the goaf. (2) The migration of overlying strata in the withdrawal space has obvious zoning characteristics, and the zoning is as follows: a stopping coal caving area, support area of the hydraulic support, withdrawal channel area, and stopping coal pillar area. (3) According to the zoning characteristics of overlying strata movement, the asymmetric zoning support control scheme of the withdrawal space is proposed. The field monitoring results show that the maximum roof subsidence in the withdrawal space is 151 mm, the maximum internal squeezing amount of the stopping coal pillar is 82 mm, and the supporting and anchoring effect of each partition in the withdrawal space is good. The set of partition asymmetric support control schemes has been successfully applied to field practice.
- Open Access
Control Study on Surrounding Rock of Gob-Side Entry Retaining below near Distance Goaf
To explore the control technology on surrounding rock of gob-side entry retaining (GSER) below a goaf in a near distance coal seam (NDCS), research was conducted on the floor ruin range, the floor stress distribution features, the layout of the GSER below near distance goaf, the width of the roadside filling wall (RFW), and the control technology of the GSER surrounding rock below the near distance goaf after upper coal seam (UCS) mining. The results show that (1) the stress of the goaf floor has obvious regional features, being divided into stress high value zone (Zone A), stress extremely low zone (Zone B), stress rebound zone (Zone C), stress transition zone (Zone D), and stress recovery zone (Zone E) according to different stress states. The stress distribution features at different depths below the goaf floor in each zone also have differences. (2) Arranging the roadway in Zone A below a coal pillar, the roadway is at high stress levels, which is not conducive to the stability of the surrounding rock. Arranging the roadway in Zone B below the goaf floor, the bearing capacity of the surrounding rock itself is weak, making it difficult to control the surrounding rock. Arranging the roadway in Zone C, the mechanical properties of the surrounding rock are good, and the difficulty of controlling the surrounding rock is relatively low. Arranging the roadway in Zone D and Zone E, there is a relatively small degree of stress concentration in the roadway rib. (3) When the RFW width is 0.5–1.5 m, stress concentration is more pronounced on the solid coal rib, and the overlying rock pressure is mainly borne by the solid coal rib, with less stress on the RFW. When the RFW width is 2~3 m, the stress on the RFW is enhanced, and the bearing capacity is significantly increased compared to RFW of 0.5–1.5 m width. The RFW contributes to supporting the overlying rock layers. (4) A comprehensive control technology for GSER surrounding rock in lower coal seam (LCS) has been proposed, which includes the grouting modification of coal and rock mass on the GSER roof, establishing a composite anchoring structure formed by utilizing bolts (cables); the strong support roof and control floor by one beam + three columns, reinforcing the RFW utilizing tie rods pre-tightening; and the hydraulic prop protection RFW and bolts (cables) protection roof at roadside. This technology has been successfully applied in field practice.
Open AccessControl Study on Surrounding Rock of Gob-Side Entry Retaining below near Distance Goaf
To explore the control technology on surrounding rock of gob-side entry retaining (GSER) below a goaf in a near distance coal seam (NDCS), research was conducted on the floor ruin range, the floor stress distribution features, the layout of the GSER below near distance goaf, the width of the roadside filling wall (RFW), and the control technology of the GSER surrounding rock below the near distance goaf after upper coal seam (UCS) mining. The results show that (1) the stress of the goaf floor has obvious regional features, being divided into stress high value zone (Zone A), stress extremely low zone (Zone B), stress rebound zone (Zone C), stress transition zone (Zone D), and stress recovery zone (Zone E) according to different stress states. The stress distribution features at different depths below the goaf floor in each zone also have differences. (2) Arranging the roadway in Zone A below a coal pillar, the roadway is at high stress levels, which is not conducive to the stability of the surrounding rock. Arranging the roadway in Zone B below the goaf floor, the bearing capacity of the surrounding rock itself is weak, making it difficult to control the surrounding rock. Arranging the roadway in Zone C, the mechanical properties of the surrounding rock are good, and the difficulty of controlling the surrounding rock is relatively low. Arranging the roadway in Zone D and Zone E, there is a relatively small degree of stress concentration in the roadway rib. (3) When the RFW width is 0.5–1.5 m, stress concentration is more pronounced on the solid coal rib, and the overlying rock pressure is mainly borne by the solid coal rib, with less stress on the RFW. When the RFW width is 2~3 m, the stress on the RFW is enhanced, and the bearing capacity is significantly increased compared to RFW of 0.5–1.5 m width. The RFW contributes to supporting the overlying rock layers. (4) A comprehensive control technology for GSER surrounding rock in lower coal seam (LCS) has been proposed, which includes the grouting modification of coal and rock mass on the GSER roof, establishing a composite anchoring structure formed by utilizing bolts (cables); the strong support roof and control floor by one beam + three columns, reinforcing the RFW utilizing tie rods pre-tightening; and the hydraulic prop protection RFW and bolts (cables) protection roof at roadside. This technology has been successfully applied in field practice.
- Open Access
- 28 November 2023
- Published by Springer Nature in International Journal of Coal Science & Technology
- Vol. 10 (1) , 1-20
Mechanism and key parameters of stress load-off by innovative asymmetric hole-constructing on the two sides of deep roadway
Traditional dense large-diameter borehole stress load-off techniques reduce the stress levels in the shallow surrounding rock, weaken the bearing capacity of the shallow surrounding rock, and greatly deteriorate the shallow surrounding rock strength and supporting structure, which is not conducive to maintaining the long-term stability of the roadway. Therefore, to address the control problem for the pronounced extrusion deformation in the two sides of a roadway and the overall outward movement of the shallow surrounding rock supported by the sides bolts and anchor cables, as well as to comprehensively consider the on-site construction conditions of the two sides of a test roadway, stress load-off technology for asymmetric hole construction on the two sides of a roadway is proposed. The asymmetric stress load-off technique is a new method; while the shallow surrounding rock of the roadway sides is strongly anchored via a full anchor cable support form, a group of large stress load-off holes near the deep stress peak line of the roadway sides is excavated to relieve pressure and protect the roadway. This technology can transfer the peak stress area of the roadway side deeper into f the surrounding rock without deteriorating the shallow surrounding rock strength and damaging the supporting structure. A numerical simulation analysis of asymmetric stress load-off on the two sides of the roadway was performed, the stress load-off effect evaluation index was established, and the optimal field construction parameters were obtained. The stress load-off parameters obtained from the study are applicable to field engineering practice. Mine pressure data reveal that the test roadway remains intact and stable during the use period when the asymmetric stress load-off technique is adopted.
- 28 November 2023
- Published by Springer Nature in International Journal of Coal Science & Technology
- Vol. 10 (1) , 1-20
Open AccessMechanism and key parameters of stress load-off by innovative asymmetric hole-constructing on the two sides of deep roadway
Traditional dense large-diameter borehole stress load-off techniques reduce the stress levels in the shallow surrounding rock, weaken the bearing capacity of the shallow surrounding rock, and greatly deteriorate the shallow surrounding rock strength and supporting structure, which is not conducive to maintaining the long-term stability of the roadway. Therefore, to address the control problem for the pronounced extrusion deformation in the two sides of a roadway and the overall outward movement of the shallow surrounding rock supported by the sides bolts and anchor cables, as well as to comprehensively consider the on-site construction conditions of the two sides of a test roadway, stress load-off technology for asymmetric hole construction on the two sides of a roadway is proposed. The asymmetric stress load-off technique is a new method; while the shallow surrounding rock of the roadway sides is strongly anchored via a full anchor cable support form, a group of large stress load-off holes near the deep stress peak line of the roadway sides is excavated to relieve pressure and protect the roadway. This technology can transfer the peak stress area of the roadway side deeper into f the surrounding rock without deteriorating the shallow surrounding rock strength and damaging the supporting structure. A numerical simulation analysis of asymmetric stress load-off on the two sides of the roadway was performed, the stress load-off effect evaluation index was established, and the optimal field construction parameters were obtained. The stress load-off parameters obtained from the study are applicable to field engineering practice. Mine pressure data reveal that the test roadway remains intact and stable during the use period when the asymmetric stress load-off technique is adopted.
- Open Access
- 28 June 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (13) , 10226
Research on J2 Evolution Law and Control under the Condition of Internal Pressure Relief in Surrounding Rock of Deep Roadway
In order to solve the support problem of deep soft crushed coal roadway, a concentrated cavern in a mining station of a mine is taken as the test object. Based on the analysis and summary of the field observation data and the law of rock pressure appearance, a new technology of pressure relief anchoring with the main body of “initiative support + borehole pressure relief” is proposed. This new technology will carry out strong active support in the shallow part of the surrounding rock and excavate a row of low-density large-diameter pressure relief boreholes in the deep coal body of the roadway ribs. The numerical analysis model is established by FLAC3D, and the second invariant of deviatoric stress (J2) is used as the analysis index to elaborate the influence of different borehole parameters on the pressure relief effect of roadway surrounding rock. The results show that different borehole parameters have different effects on roadway pressure relief, that is, borehole depth > borehole length > borehole spacing. After the borehole process is used to relieve the pressure of the surrounding rock, the deformation of the mining roadway side in the subsequent observation process is always controlled within the range of 100 mm, and the shallow surrounding rock support system is effectively protected. The comprehensive control effect is very obvious. Therefore, the field practice proves that the supporting technology can effectively solve the problem of large deformation support of similar roadway surrounding rock.
- 28 June 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (13) , 10226
Open AccessResearch on J2 Evolution Law and Control under the Condition of Internal Pressure Relief in Surrounding Rock of Deep Roadway
In order to solve the support problem of deep soft crushed coal roadway, a concentrated cavern in a mining station of a mine is taken as the test object. Based on the analysis and summary of the field observation data and the law of rock pressure appearance, a new technology of pressure relief anchoring with the main body of “initiative support + borehole pressure relief” is proposed. This new technology will carry out strong active support in the shallow part of the surrounding rock and excavate a row of low-density large-diameter pressure relief boreholes in the deep coal body of the roadway ribs. The numerical analysis model is established by FLAC3D, and the second invariant of deviatoric stress (J2) is used as the analysis index to elaborate the influence of different borehole parameters on the pressure relief effect of roadway surrounding rock. The results show that different borehole parameters have different effects on roadway pressure relief, that is, borehole depth > borehole length > borehole spacing. After the borehole process is used to relieve the pressure of the surrounding rock, the deformation of the mining roadway side in the subsequent observation process is always controlled within the range of 100 mm, and the shallow surrounding rock support system is effectively protected. The comprehensive control effect is very obvious. Therefore, the field practice proves that the supporting technology can effectively solve the problem of large deformation support of similar roadway surrounding rock.
- Open Access
Study on the Stability of Coal Pillars in a Gob-Side Two-Entry Arrangement of Different Layers in Fully Mechanized Caving and the Zonal Linkage Control of “Heteromorphic” Surrounding Rock
To solve the problem of considerable deformation of the tailgate in a fully mechanized caving face, the position of the main roof fracture line is first obtained by theoretical calculation, combined with the results of a similar simulation test and numerical simulation analysis. The width of the section coal pillar in the tailgate is determined to be 11.5 m. Based on the distribution characteristics of deviatoric stress and the plastic zone of surrounding rock, combined with the location characteristics and geological conditions, a new zoning control design approach is proposed, a “two pillars, three zones, and three parts” arrangement for the surrounding rock of the tailgate. The targeted two-entry support design is carried out following common engineering practices. Mine pressure monitoring data were used to verify the results of the new two-entry design. The comparison shows that the supporting technology can effectively control the considerable deformation of the surrounding rock, improving stability for regular mining production.
Open AccessStudy on the Stability of Coal Pillars in a Gob-Side Two-Entry Arrangement of Different Layers in Fully Mechanized Caving and the Zonal Linkage Control of “Heteromorphic” Surrounding Rock
To solve the problem of considerable deformation of the tailgate in a fully mechanized caving face, the position of the main roof fracture line is first obtained by theoretical calculation, combined with the results of a similar simulation test and numerical simulation analysis. The width of the section coal pillar in the tailgate is determined to be 11.5 m. Based on the distribution characteristics of deviatoric stress and the plastic zone of surrounding rock, combined with the location characteristics and geological conditions, a new zoning control design approach is proposed, a “two pillars, three zones, and three parts” arrangement for the surrounding rock of the tailgate. The targeted two-entry support design is carried out following common engineering practices. Mine pressure monitoring data were used to verify the results of the new two-entry design. The comparison shows that the supporting technology can effectively control the considerable deformation of the surrounding rock, improving stability for regular mining production.
- Open Access
Control Mechanism and Support Technology of Deep Roadway Intersection with Large Cross-Section: Case Study
Conventional bolt–shotcrete support technology is usually single-layered, which does not meet the requirements of strength and stiffness for roadway support. Therefore, in this paper, new combined support technology, including a multiple-layered staggered dense arrangement of bolts, multiple-layered laying of steel meshes, multiple-layered pouring of shotcrete, strengthening support of long cables, and full cross-section grouting, is proposed. Specifically, the following new combined support technology process is proposed: first layer of shotcrete (80 mm), first layer of mesh, first layer of bolt, second layer of shotcrete (50 mm), second layer of mesh, second layer of bolt, reinforced cable, third layer of shotcrete (50 mm), and grouting. The results show the following: (1) In the system of a superimposed coupling strengthening bearing arch, compared to a cable bearing arch, changing the support parameters of the bolt bearing arch can significantly vary the bearing capacity. A range of bolt spacing between 0.4 m and 0.7 m is more conducive for a high performance of the bearing capacity of the superimposed coupling strengthening bearing arch. (2) With the increase in the single-layer shotcrete thickness (from 50 mm to 100 mm), the bearing capacity of the shotcrete structure increased rapidly in the form of a power function. (3) After the multi-level bolt–shotcrete support structure was adopted, the ring peak zone of the deviatoric stress of the surrounding rock at the roadway intersection was largely transferred to the shallow part, and the plastic zone of the surrounding rock of the roadway was reduced by 43.3~52.3% compared to that of the conventional bolt–shotcrete support. The field practice model showed that the final roof-to-floor and rib-to-rib convergences of the roadway intersection were 114 mm and 91 mm after 26 days, respectively. The rock mass above the depth of 3 m of the roadway’s roof and sides was complete, the lithology was dense, and there was no obvious crack. The new technology achieves effective control of a deep roadway intersection with a large cross-section.
Open AccessControl Mechanism and Support Technology of Deep Roadway Intersection with Large Cross-Section: Case Study
Conventional bolt–shotcrete support technology is usually single-layered, which does not meet the requirements of strength and stiffness for roadway support. Therefore, in this paper, new combined support technology, including a multiple-layered staggered dense arrangement of bolts, multiple-layered laying of steel meshes, multiple-layered pouring of shotcrete, strengthening support of long cables, and full cross-section grouting, is proposed. Specifically, the following new combined support technology process is proposed: first layer of shotcrete (80 mm), first layer of mesh, first layer of bolt, second layer of shotcrete (50 mm), second layer of mesh, second layer of bolt, reinforced cable, third layer of shotcrete (50 mm), and grouting. The results show the following: (1) In the system of a superimposed coupling strengthening bearing arch, compared to a cable bearing arch, changing the support parameters of the bolt bearing arch can significantly vary the bearing capacity. A range of bolt spacing between 0.4 m and 0.7 m is more conducive for a high performance of the bearing capacity of the superimposed coupling strengthening bearing arch. (2) With the increase in the single-layer shotcrete thickness (from 50 mm to 100 mm), the bearing capacity of the shotcrete structure increased rapidly in the form of a power function. (3) After the multi-level bolt–shotcrete support structure was adopted, the ring peak zone of the deviatoric stress of the surrounding rock at the roadway intersection was largely transferred to the shallow part, and the plastic zone of the surrounding rock of the roadway was reduced by 43.3~52.3% compared to that of the conventional bolt–shotcrete support. The field practice model showed that the final roof-to-floor and rib-to-rib convergences of the roadway intersection were 114 mm and 91 mm after 26 days, respectively. The rock mass above the depth of 3 m of the roadway’s roof and sides was complete, the lithology was dense, and there was no obvious crack. The new technology achieves effective control of a deep roadway intersection with a large cross-section.
- Open Access
New Technology of Pressure Relief Control in Soft Coal Roadways with Deep, Violent Mining and Large Deformation: A Key Study
Previous studies have shown that the influence of deep dynamic pressure on the surrounding rock control of a coal roadway is one of the difficulties in mine roadway support. Based on the investigation of the headgate 11231 in a coal mine, this study analyzes the damage characteristics of coal roadway surrounding rock affected by deep dynamic pressure, expounds on the difficulties of controlling the roadway surrounding rock, and creatively proposes a cooperative control technology of external anchor–internal unloading for regulating large deformation of roadways. The vertical stress distribution and transfer law of surrounding rock with different hole-making depths, spacing, and lengths after roadway excavation were simulated and studied, and an appropriate parameter range of hole-making space in the stage without dynamic pressure influence was obtained. Considering the influence of mining dynamic pressure, the surrounding rock pressure relief effect of each optimized hole-making parameter was analyzed. In addition, the optimal hole-making parameters (the hole-making depth, spacing, and length were 8 m, 3.2 m, and 3 m, respectively) that can effectively reduce the high stress of roadway shallow surrounding rock in two stages (without and with dynamic pressure) and ensure integrity of the shallow surrounding rock were obtained. The actual field application shows that the new technology can reduce the higher rib deformation by approximately 850 mm and achieve a good surrounding rock control effect. The research and practice show that the pressure relief control for soft coal roadways with deep, violent mining and large deformation has achieved success, providing technical support for the maintenance of the same type of roadway.
Open AccessNew Technology of Pressure Relief Control in Soft Coal Roadways with Deep, Violent Mining and Large Deformation: A Key Study
Previous studies have shown that the influence of deep dynamic pressure on the surrounding rock control of a coal roadway is one of the difficulties in mine roadway support. Based on the investigation of the headgate 11231 in a coal mine, this study analyzes the damage characteristics of coal roadway surrounding rock affected by deep dynamic pressure, expounds on the difficulties of controlling the roadway surrounding rock, and creatively proposes a cooperative control technology of external anchor–internal unloading for regulating large deformation of roadways. The vertical stress distribution and transfer law of surrounding rock with different hole-making depths, spacing, and lengths after roadway excavation were simulated and studied, and an appropriate parameter range of hole-making space in the stage without dynamic pressure influence was obtained. Considering the influence of mining dynamic pressure, the surrounding rock pressure relief effect of each optimized hole-making parameter was analyzed. In addition, the optimal hole-making parameters (the hole-making depth, spacing, and length were 8 m, 3.2 m, and 3 m, respectively) that can effectively reduce the high stress of roadway shallow surrounding rock in two stages (without and with dynamic pressure) and ensure integrity of the shallow surrounding rock were obtained. The actual field application shows that the new technology can reduce the higher rib deformation by approximately 850 mm and achieve a good surrounding rock control effect. The research and practice show that the pressure relief control for soft coal roadways with deep, violent mining and large deformation has achieved success, providing technical support for the maintenance of the same type of roadway.
- Open Access
Study on Stability and Control of Surrounding Rock in the Stopping Space with Fully Mechanized Top Coal Caving under Goaf
Under the condition of fully mechanized top coal caving in close-distance coal seams, the surrounding rock of the stopping space easily loses stability during the withdrawal of mining equipment in the working face because the lower coal seam working face is located under the goaf and the overburden rock has a large range of complex interaction. Field investigation, theoretical analysis, laboratory experiment, similar simulation experiment, numerical simulation, and field industrial tests are used to carry out the research on the stability and control of the surrounding rock in the large section stopping space under the goaf in this paper. The research conclusions are as follows. (1) It is determined that the lower coal seam working face can only stop mining under the goaf, and the reasonable stopping position under the goaf should ensure that the key block fracture line of the main roof is behind the support. (2) The interaction law between the main roof’s key blocks of the upper and lower coal seams is analyzed, and the catastrophic conditions for sliding instability and rotary instability of the main roof’s key blocks of the upper and lower coal seams are obtained. (3) “Anchorage with push and pull equipment-Embedded anchorages and trays” integral anchoring technology is developed. The dimensions of the push and pull equipment are determined. (4) Through numerical simulation of the distribution characteristics of the anchor cable pre-stress field, the asymmetric control scheme of “Partition long and short anchor cables + Integral polyurethane mesh + Embedded anchorages and trays for roof protection” is determined. The rock pressure observation shows that the withdrawal of the working face equipment is implemented safely.
Open AccessStudy on Stability and Control of Surrounding Rock in the Stopping Space with Fully Mechanized Top Coal Caving under Goaf
Under the condition of fully mechanized top coal caving in close-distance coal seams, the surrounding rock of the stopping space easily loses stability during the withdrawal of mining equipment in the working face because the lower coal seam working face is located under the goaf and the overburden rock has a large range of complex interaction. Field investigation, theoretical analysis, laboratory experiment, similar simulation experiment, numerical simulation, and field industrial tests are used to carry out the research on the stability and control of the surrounding rock in the large section stopping space under the goaf in this paper. The research conclusions are as follows. (1) It is determined that the lower coal seam working face can only stop mining under the goaf, and the reasonable stopping position under the goaf should ensure that the key block fracture line of the main roof is behind the support. (2) The interaction law between the main roof’s key blocks of the upper and lower coal seams is analyzed, and the catastrophic conditions for sliding instability and rotary instability of the main roof’s key blocks of the upper and lower coal seams are obtained. (3) “Anchorage with push and pull equipment-Embedded anchorages and trays” integral anchoring technology is developed. The dimensions of the push and pull equipment are determined. (4) Through numerical simulation of the distribution characteristics of the anchor cable pre-stress field, the asymmetric control scheme of “Partition long and short anchor cables + Integral polyurethane mesh + Embedded anchorages and trays for roof protection” is determined. The rock pressure observation shows that the withdrawal of the working face equipment is implemented safely.