Yongyao Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yongyao Chen has a total of 55 co-authors. Here are the top co-authors by number of shared publications:
- Wei Gao
College of Underwater Acoustic Engineering, Harbin Engineering University, Harbin 150001, China
5 shared publications - Xiaohuan Li
College of Underwater Acoustic Engineering, Harbin Engineering University, Harbin 150001, China
3 shared publications - Chun Zhao
School of Advanced Technology Xi'an Jiaotong‐Liverpool University Suzhou China
2 shared publications - Lianjia Zhao
College of Underwater Acoustic Engineering, Harbin Engineering University, Harbin 150001, China
2 shared publications Zedong Ma
National Key Laboratory of Underwater Acoustic Technology, Harbin Engineering University 1 , Harbin 150001
2 shared publications- Andrey A. Bogdanov
Harbin Engineering University
1 shared publication
Latest Publications
- Open Access
- 21 October 2026
- Published by MDPI AG in Inventions
- Vol. 11 (5) , 111
Research Progress on Hydrophone Elements and Their Applications in Towed Line Arrays and Imaging Sonar for Underwater Detection
Driven by growing marine exploitation and maritime security demands, underwater detection systems impose stringent performance requirements for deep-sea early warning, seabed resource exploration and underwater infrastructure inspection. This review surveys recent advances in key underwater detection hardware. In terms of hydrophone technologies, this review elaborates the developmental landscape and landmark innovations of piezoelectric, fiber-optic, and micro-electromechanical-system (MEMS) hydrophones. Regarding array architectures, it dissects the core engineering bottlenecks and state-of-the-art evolutionary trends for two representative underwater detection arrays: towed line arrays and imaging sonar. Unresolved technical challenges and prospective research directions are summarized, aiming to provide actionable references for researchers engaged in the design and field deployment of underwater detection hardware and algorithms.
- 21 October 2026
- Published by MDPI AG in Inventions
- Vol. 11 (5) , 111
Open AccessResearch Progress on Hydrophone Elements and Their Applications in Towed Line Arrays and Imaging Sonar for Underwater Detection
Driven by growing marine exploitation and maritime security demands, underwater detection systems impose stringent performance requirements for deep-sea early warning, seabed resource exploration and underwater infrastructure inspection. This review surveys recent advances in key underwater detection hardware. In terms of hydrophone technologies, this review elaborates the developmental landscape and landmark innovations of piezoelectric, fiber-optic, and micro-electromechanical-system (MEMS) hydrophones. Regarding array architectures, it dissects the core engineering bottlenecks and state-of-the-art evolutionary trends for two representative underwater detection arrays: towed line arrays and imaging sonar. Unresolved technical challenges and prospective research directions are summarized, aiming to provide actionable references for researchers engaged in the design and field deployment of underwater detection hardware and algorithms.
- Open Access
- 1 August 2026
- Published by AIP Publishing in AIP Advances
- Vol. 16 (8)
Nonlinear vibration characteristics and noise reduction performance of honeycomb metamaterial structures with hysteretic nonlinearity
Vibration and noise are key factors affecting the technical performance of modern equipment. With the trend toward smarter and more compact marine exploration equipment, there is an urgent need for ultra-thin, lightweight, and pressure-resistant underwater acoustic metamaterials. In this paper, a honeycomb acoustic metamaterial embedded with a hysteretic nonlinear resonator is proposed. Based on the improved Van der Pol method, the dynamic equations of the honeycomb metamaterial with hysteretic nonlinear characteristics are established. Based on the harmonic balancing method, the influence of hysteresis parameters on vibration characteristics and stability characteristics is analyzed under simple harmonic acoustic excitation. Then, the effects of nonlinear parameters on the characteristics of stochastic vibrations are discussed using the maximum Lyapunov exponent and the steady-state probability density function. Finally, the impact of structural dimensional parameters on noise reduction performance is investigated. Three different types of nonlinear resonators are proposed to achieve low-frequency bandgap tuning, and their underwater noise reduction performance is discussed. This study provides a reference for the design of lightweight and thin-walled honeycomb acoustic metamaterial structures, promotes their application in underwater noise reduction, and holds significant academic value and application potential.
- 1 August 2026
- Published by AIP Publishing in AIP Advances
- Vol. 16 (8)
Open AccessNonlinear vibration characteristics and noise reduction performance of honeycomb metamaterial structures with hysteretic nonlinearity
Vibration and noise are key factors affecting the technical performance of modern equipment. With the trend toward smarter and more compact marine exploration equipment, there is an urgent need for ultra-thin, lightweight, and pressure-resistant underwater acoustic metamaterials. In this paper, a honeycomb acoustic metamaterial embedded with a hysteretic nonlinear resonator is proposed. Based on the improved Van der Pol method, the dynamic equations of the honeycomb metamaterial with hysteretic nonlinear characteristics are established. Based on the harmonic balancing method, the influence of hysteresis parameters on vibration characteristics and stability characteristics is analyzed under simple harmonic acoustic excitation. Then, the effects of nonlinear parameters on the characteristics of stochastic vibrations are discussed using the maximum Lyapunov exponent and the steady-state probability density function. Finally, the impact of structural dimensional parameters on noise reduction performance is investigated. Three different types of nonlinear resonators are proposed to achieve low-frequency bandgap tuning, and their underwater noise reduction performance is discussed. This study provides a reference for the design of lightweight and thin-walled honeycomb acoustic metamaterial structures, promotes their application in underwater noise reduction, and holds significant academic value and application potential.
- Open Access
- 19 June 2026
- Published by Elsevier in SSRN Electronic Journal
Nonlinear Vibration Damping Characteristics of Fish-Lip Metamaterials Based on Hysteresis Properties
Addressing the issues of poor low-frequency vibration isolation as well as the high complexity and large thickness dimensions of vibration reduction systems in traditional detection equipment, there is an urgent need to develop ultra-thin, lightweight, low-frequency broadband vibration reduction structures. Nonlinear metamaterials hold immense application potential in low-frequency broadband vibration damping. Based on nonlinear hysteresis theory, the low-frequency vibration damping performance of fish-lip metamaterial structure composed of stacked multi-layer cosine beams is investigated. The influence of hysteretic nonlinear parameters on the vibration damping performance are discussed. By analyzing the influence of structural dimensions on vibration damping characteristics through finite element methods, the optimal strategy for achieving maximum damping performance is derived and verified experimentally. This research provides theoretical guidance and technical support for designing lightweight, low-frequency, broadband nonlinear metamaterial vibration-damping structures, further advancing the engineering application of metamaterial structures in low-frequency vibration reduction.
- 19 June 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessNonlinear Vibration Damping Characteristics of Fish-Lip Metamaterials Based on Hysteresis Properties
Addressing the issues of poor low-frequency vibration isolation as well as the high complexity and large thickness dimensions of vibration reduction systems in traditional detection equipment, there is an urgent need to develop ultra-thin, lightweight, low-frequency broadband vibration reduction structures. Nonlinear metamaterials hold immense application potential in low-frequency broadband vibration damping. Based on nonlinear hysteresis theory, the low-frequency vibration damping performance of fish-lip metamaterial structure composed of stacked multi-layer cosine beams is investigated. The influence of hysteretic nonlinear parameters on the vibration damping performance are discussed. By analyzing the influence of structural dimensions on vibration damping characteristics through finite element methods, the optimal strategy for achieving maximum damping performance is derived and verified experimentally. This research provides theoretical guidance and technical support for designing lightweight, low-frequency, broadband nonlinear metamaterial vibration-damping structures, further advancing the engineering application of metamaterial structures in low-frequency vibration reduction.
- Open Access
- 1 March 2026
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 159 (3) , 1805-1812
Two-dimensional flexural wave vortices based on ring-shaped and partitioned acoustic black hole metasurface
Vortex beams carrying orbital angular momentum have been extensively investigated and applied in acoustics and electromagnetics, but the generation of flexural wave vortices in thin plates still lacks a simple and feasible method. Here, this work proposes an elastic metasurface based on ring-shaped and partitioned acoustic black holes (RPABH). By tailoring the residual thickness of RPABH unit cells, full 0–2π phase shift control with high transmittance is achieved. Numerical and experimental studies confirm that this metasurface converts incident cylindrical waves into flexural wave vortices. The topological charge is linearly related to the number of supercells, and the vortex rotation direction is programmably controllable. This design provides a passive and effective approach for flexural wave vortices generation and may offer new insights into particle manipulation and structural health monitoring.
- 1 March 2026
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 159 (3) , 1805-1812
Open AccessTwo-dimensional flexural wave vortices based on ring-shaped and partitioned acoustic black hole metasurface
Vortex beams carrying orbital angular momentum have been extensively investigated and applied in acoustics and electromagnetics, but the generation of flexural wave vortices in thin plates still lacks a simple and feasible method. Here, this work proposes an elastic metasurface based on ring-shaped and partitioned acoustic black holes (RPABH). By tailoring the residual thickness of RPABH unit cells, full 0–2π phase shift control with high transmittance is achieved. Numerical and experimental studies confirm that this metasurface converts incident cylindrical waves into flexural wave vortices. The topological charge is linearly related to the number of supercells, and the vortex rotation direction is programmably controllable. This design provides a passive and effective approach for flexural wave vortices generation and may offer new insights into particle manipulation and structural health monitoring.
- 18 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-8
Modeling Analysis and Experimental Verification of Tri-Axial Differential Pressure Vector Hydrophones Based on Piezoelectric MEMS Arrayed Sensors
This paper proposes a tri-axial acoustic differential pressure vector hydrophone, which consists of three pairs of piezoelectric MEMS sensors. The presented sensors are designed and fabricated using the AlN-on-CSOI MEMS platform, realizing an improving acoustic pressure sensitivity of 178.5 dB±2 dB (re 1V/μPa)@1kHz. The pressure-gradient receiving model of pairs of symmetrically distributed MEMS sensors in acoustic field is analyzed, guiding the structure design of the tri-axial acoustic differential pressure vector hydrophone. Calibrations in a standing wave tube are conducted. The effectively operating working frequency band for the presented vector hydrophone is within 20–2000 Hz. The acoustic sensitivities of the hydrophone for the three axes are −182.1 dB@ 1000Hz, -182.5 dB@ 1000 Hz and -182.8 dB @1000 Hz (0 dB = 1 V/μPa), respectively, with a maximum error of less than ±1 dB. Moreover, apparent “eight-shape” directivities for the three axes coupled with the concave point depths of 43.2 dB, 42.1 dB and 39.3 dB, and the asymmetries of 1.8 dB, 2 dB and 1.9 dB are demonstrated. The results indicate that the tri-axial differential pressure MEMS vector hydrophone holds promising prospects for low-frequency underwater acoustic detection applications.
- 18 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-8
Modeling Analysis and Experimental Verification of Tri-Axial Differential Pressure Vector Hydrophones Based on Piezoelectric MEMS Arrayed Sensors
This paper proposes a tri-axial acoustic differential pressure vector hydrophone, which consists of three pairs of piezoelectric MEMS sensors. The presented sensors are designed and fabricated using the AlN-on-CSOI MEMS platform, realizing an improving acoustic pressure sensitivity of 178.5 dB±2 dB (re 1V/μPa)@1kHz. The pressure-gradient receiving model of pairs of symmetrically distributed MEMS sensors in acoustic field is analyzed, guiding the structure design of the tri-axial acoustic differential pressure vector hydrophone. Calibrations in a standing wave tube are conducted. The effectively operating working frequency band for the presented vector hydrophone is within 20–2000 Hz. The acoustic sensitivities of the hydrophone for the three axes are −182.1 dB@ 1000Hz, -182.5 dB@ 1000 Hz and -182.8 dB @1000 Hz (0 dB = 1 V/μPa), respectively, with a maximum error of less than ±1 dB. Moreover, apparent “eight-shape” directivities for the three axes coupled with the concave point depths of 43.2 dB, 42.1 dB and 39.3 dB, and the asymmetries of 1.8 dB, 2 dB and 1.9 dB are demonstrated. The results indicate that the tri-axial differential pressure MEMS vector hydrophone holds promising prospects for low-frequency underwater acoustic detection applications.
- 11 November 2025
- Published by Elsevier in Sensors and Actuators A: Physical
- Vol. 397
A lightweight and small moving coil underwater acoustic transducer based on the optimal design of magnetic circuit
- 11 November 2025
- Published by Elsevier in Sensors and Actuators A: Physical
- Vol. 397
A lightweight and small moving coil underwater acoustic transducer based on the optimal design of magnetic circuit
- 1 April 2025
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 157 (4) , 2465-2472
Low frequency tuning of space-folded acoustic metamaterial amplifiers through effective density distribution method
Space-folded acoustic metamaterials (SFAMs) have exceptional low frequency sound control capability in deep sub-wavelength scale, showing significant potential for weak acoustic signal detection. However, lowering the working frequencies of SFAMs may increase the device size, limiting their applications and raising production costs. To address these issues, this study proposes compact SFAM acoustic amplifiers operating in low frequencies, where their working frequencies are flexibly controlled by engineering effective density without increasing device size. Further experiments have demonstrated the capability of wide range frequency control of SFAM through engineering its effective density. The experimental results clearly indicate that the low frequency tuning of SFAMs results from controlling SFAMs' channel width gradients, which is associated with the spatial distribution of metamaterial's effective density. Further studies reveal that compared to the gradient density distribution method in SFAMs, the step density distribution method may have superior low frequency control of acoustic waves, which are capable of frequency tuning of SFAM acoustic amplifier over one octave band. This work provides possibilities for the development of low frequency acoustic amplifiers, where the merits include compact size, lightweight, and low cost, which are highly desirable for acoustics sensing and noise control applications.
- 1 April 2025
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 157 (4) , 2465-2472
Low frequency tuning of space-folded acoustic metamaterial amplifiers through effective density distribution method
Space-folded acoustic metamaterials (SFAMs) have exceptional low frequency sound control capability in deep sub-wavelength scale, showing significant potential for weak acoustic signal detection. However, lowering the working frequencies of SFAMs may increase the device size, limiting their applications and raising production costs. To address these issues, this study proposes compact SFAM acoustic amplifiers operating in low frequencies, where their working frequencies are flexibly controlled by engineering effective density without increasing device size. Further experiments have demonstrated the capability of wide range frequency control of SFAM through engineering its effective density. The experimental results clearly indicate that the low frequency tuning of SFAMs results from controlling SFAMs' channel width gradients, which is associated with the spatial distribution of metamaterial's effective density. Further studies reveal that compared to the gradient density distribution method in SFAMs, the step density distribution method may have superior low frequency control of acoustic waves, which are capable of frequency tuning of SFAM acoustic amplifier over one octave band. This work provides possibilities for the development of low frequency acoustic amplifiers, where the merits include compact size, lightweight, and low cost, which are highly desirable for acoustics sensing and noise control applications.
- 28 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (20) , 33112-33119
Surface-Mountable VZO Film-Based Piezoelectric Sensors Array in Foil for Underwater Fluctuating Pressure Measurements
Wall fluctuating pressure in the boundary layer is critical for physical understanding of the surface flow and detection resolution optimization of the underwater vehicle. In this study, a flexible MEMS vanadium-doped zinc oxide (VZO) film piezoelectric pressure sensor array is developed for underwater applications. 2% vanadium-doped zinc oxide film achieves figure of merit of -54.5, far higher than the previous records of the contemporary thin films, indicating excellent receiving sensitivity. The sensors are designed and fabricated using a 4-mask VZO-on-SOI process. An array of 2×5 sensors is flexibly integrated on a polyimide foil and insulated by a parylene C waterproof cover. Calibrations in a plane wave tube are demonstrated. About 0.64± 0.06 mV/Pa pressure sensitivity at the frequency of 10 Hz to 2 kHz and the maximum nonlinearity of 0.3% from 0 to 50 Pa are achieved. The capabilities of the flexible sensors array in a real-time sensing situation on an underwater vehicle model are validated. The laminar, transition and turbulent flow at different positions of the vehicle model are detected successfully from the sensor outputs. The result shows that the amplitude and power energy of the fluctuation pressure at the transition case are higher than that of the laminar and turbulent flow. The presented sensors array with merits of low power, miniature size and low foot-print, offers a flexible and readily surface-mountable system, exhibiting promising potentials in underwater applications.
- 28 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (20) , 33112-33119
Surface-Mountable VZO Film-Based Piezoelectric Sensors Array in Foil for Underwater Fluctuating Pressure Measurements
Wall fluctuating pressure in the boundary layer is critical for physical understanding of the surface flow and detection resolution optimization of the underwater vehicle. In this study, a flexible MEMS vanadium-doped zinc oxide (VZO) film piezoelectric pressure sensor array is developed for underwater applications. 2% vanadium-doped zinc oxide film achieves figure of merit of -54.5, far higher than the previous records of the contemporary thin films, indicating excellent receiving sensitivity. The sensors are designed and fabricated using a 4-mask VZO-on-SOI process. An array of 2×5 sensors is flexibly integrated on a polyimide foil and insulated by a parylene C waterproof cover. Calibrations in a plane wave tube are demonstrated. About 0.64± 0.06 mV/Pa pressure sensitivity at the frequency of 10 Hz to 2 kHz and the maximum nonlinearity of 0.3% from 0 to 50 Pa are achieved. The capabilities of the flexible sensors array in a real-time sensing situation on an underwater vehicle model are validated. The laminar, transition and turbulent flow at different positions of the vehicle model are detected successfully from the sensor outputs. The result shows that the amplitude and power energy of the fluctuation pressure at the transition case are higher than that of the laminar and turbulent flow. The presented sensors array with merits of low power, miniature size and low foot-print, offers a flexible and readily surface-mountable system, exhibiting promising potentials in underwater applications.
- Open Access
- 1 February 2024
- Published by AIP Publishing in APL Materials
- Vol. 12 (2)
Stacked space-folded acoustic metasurfaces for the flexible control of sound absorption
Sound absorbing materials capable of working in harsh environments (e.g., fire resistance, moisture resistance, and pressure resistance) while having excellent low-frequency sound absorption properties are highly desirable for many practical applications. Recently, a new class of acoustic absorbers based on space coiling and folding metamaterials (SCFMs) has emerged. The SCFMs could be comprised of rigid plastics, ceramics, and metals and could be a good candidate for developing sound-absorbing devices capable of working in harsh environments. The SCFMs also enable flexible control of low-frequency sound with subwavelength structures, addressing the problem of poor absorption of low-frequency noise encountered by conventional acoustic materials. However, the current geometries of SCFM meta-atoms do not take full advantage of the configuration of three-dimensional space, limiting their ability for flexible control of sound absorption properties. Here, we propose an acoustic absorber based on stacked SCFMs with side openings, which could effectively absorb line-spectrum noise as well as broadband noise. The effects associated with the geometry and resonance modes of SCFMs are shown to significantly influence the sound absorption properties. To understand the sound-metamaterial interaction, an analytical model is obtained to study the acoustic response of SCFMs, which is further validated by numerical simulations. Further experiments have demonstrated the acoustic properties of our proposed metamaterial structure and confirmed the capability of stacked SCFMs for flexible control of the acoustic absorption spectrum. This work provides new possibilities for the development of novel sound absorption metamaterials desirable for many practical applications.
- 1 February 2024
- Published by AIP Publishing in APL Materials
- Vol. 12 (2)
Open AccessStacked space-folded acoustic metasurfaces for the flexible control of sound absorption
Sound absorbing materials capable of working in harsh environments (e.g., fire resistance, moisture resistance, and pressure resistance) while having excellent low-frequency sound absorption properties are highly desirable for many practical applications. Recently, a new class of acoustic absorbers based on space coiling and folding metamaterials (SCFMs) has emerged. The SCFMs could be comprised of rigid plastics, ceramics, and metals and could be a good candidate for developing sound-absorbing devices capable of working in harsh environments. The SCFMs also enable flexible control of low-frequency sound with subwavelength structures, addressing the problem of poor absorption of low-frequency noise encountered by conventional acoustic materials. However, the current geometries of SCFM meta-atoms do not take full advantage of the configuration of three-dimensional space, limiting their ability for flexible control of sound absorption properties. Here, we propose an acoustic absorber based on stacked SCFMs with side openings, which could effectively absorb line-spectrum noise as well as broadband noise. The effects associated with the geometry and resonance modes of SCFMs are shown to significantly influence the sound absorption properties. To understand the sound-metamaterial interaction, an analytical model is obtained to study the acoustic response of SCFMs, which is further validated by numerical simulations. Further experiments have demonstrated the acoustic properties of our proposed metamaterial structure and confirmed the capability of stacked SCFMs for flexible control of the acoustic absorption spectrum. This work provides new possibilities for the development of novel sound absorption metamaterials desirable for many practical applications.