Longyong Chen

Three-dimensional synthetic aperture radar (SAR) point clouds provide valuable geometric observations of urban scenes, but they often suffer from severe noise and layer-like artifacts caused by the low signal-to-noise ratio and tomographic imaging mechanism. These degradations make SAR point cloud denoising significantly more challenging than conventional LiDAR point cloud denoising. In this paper, we propose a Geometry-guided Diffusion SAR Point Cloud Denoising (GDSD) framework to recover geometrically coherent building surfaces from noisy SAR point clouds.The key idea is to exploit relatively clean LiDAR point clouds as geometry priors while avoiding the need for paired SAR–LiDAR supervision or clean SAR ground truth. Specifically, we introduce a Forward Gaussian Noising Process to disrupt the intrinsic layer-like artifacts of SAR point clouds and reduce the input-level discrepancy between SAR and LiDAR domains. We further design a geometry prototype-based alignment module that projects SAR and LiDAR bottleneck features into a shared LiDAR-dominated latent space, enabling geometry-aware conditional reverse diffusion. A DiT-3D-based denoising network is then trained with LiDAR-domain diffusion supervision and applied to SAR point clouds using the aligned SAR geometry condition. To evaluate the proposed method, we construct a SAR point cloud denoising benchmark based on the MV3DSAR dataset with CAD-derived reference surfaces. Experimental results show that GDSD significantly improves the quality of noisy SAR point clouds and clearly outperforms the previous conventional LiDAR point cloud denoising baseline, producing more continuous and geometrically coherent SAR building point clouds.

In ultra-wideband (UWB) synthetic aperture radar (SAR) imaging, in-band antenna standing waves (SW) can generate range ghosts, degrading image quality. To address this issue, an image-domain suppression method is proposed, leveraging the phase symmetry property (PSP) between the SW signal and its mirror SW (MSW) signal. Based on PSP, the MSW signal is rapidly constructed from the SW signal, ensuring that both share the same target region but exhibit different ghost regions. PSP is further extended to the image domain. Specifically, the SW-induced phase is extracted in the wavenumber domain. Based on the PSP, this phase is then used to construct the MSW signal, which exhibits a phase spectrum that is symmetric to that of the SW signal with respect to the origin. The MSW image is subsequently fused with the original SAR image, thereby effectively suppressing SW-induced ghosts. The experimental results demonstrate that the proposed method significantly mitigates ghosting while preserving the amplitude and structural integrity of the main signal, thereby enhancing overall imaging quality.

Aimed at the elevation ambiguity problem in array synthetic aperture radar (SAR) three-dimensional imaging, this paper proposes a novel ambiguity-resolving method based on wavefront modulation. By introducing measured plasma lens modulation phases and constructing an array SAR signal echo model incorporating wavefront modulation, the method effectively overcomes the physical size limitations of traditional array antennas. Theoretical analysis demonstrates that wavefront modulation significantly reduces the grating lobe level of the array pattern, equivalently increasing the number of array channels and thereby shortening the shortest baseline length, which enhances the system’s maximum unambiguous height. At the signal processing level, an observation equation based on compressed sensing is established, and target reconstruction is achieved using the Orthogonal Matching Pursuit (OMP) algorithm. Monte Carlo simulation results indicate that under the same signal-to-noise ratio conditions, when the observation range is extended to twice the theoretical maximum unambiguous height, the proposed method maintains a reconstruction success rate of over 95%, whereas the traditional method’s reconstruction success rate drops rapidly below 40% once the maximum unambiguous range is exceeded. This study also investigates the 3D reconstruction of spatial point targets and a rectangular building, with the analysis of their theoretical ambiguous positions confirming the method’s effectiveness in suppressing ambiguous targets in the vicinity of spatial point targets as well as in front of and behind the structure. This study provides a new technical approach to overcoming antenna size constraints on airborne platforms, with significant application value in fields such as digital elevation model construction and urban 3D imaging.

This study addresses the challenge of suppressing radio frequency interference (RFI) in ultra-wideband (UWB) synthetic aperture radar (SAR) operating within complex electromagnetic environments, and proposes an innovative time–frequency signal extraction method. The proposed approach integrates a low-rank and sparse representation (LRSR) model in the time–frequency domain with a time total variation (TTV) constraint. The core contributions are twofold: (1) constructing a time–frequency LRSR model of frequency modulation continuous wave (FMCW) signal, and (2) incorporating spectral continuity as a prior via TTV regularization into a joint low-rank sparse optimization framework. This effectively reduces the aliasing of RFI components into the target components caused by improper hyperparameters, which is particularly pronounced under low signal-to-interference-plus-noise ratio (SINR) conditions. To enhance robustness, the incoherence of interference across frequency bands is exploited, and a sub-band coherence factor (CF) weighting technique is introduced to further suppress RFI residues in the image domain. Experimental results demonstrate that the proposed method significantly outperforms existing robust principal component analysis (RPCA)-based techniques, offering a more adaptive and robust solution for RFI mitigation in UWB SAR systems.

The Linfen–Yuncheng Basin is located on the southern edge of the Fenwei Fault Zone, influenced by intense tectonic activity, thick Quaternary sedimentation, and anthropogenic disturbance, it exhibits prominent characteristics of ground subsidence and fissure development. However, uncertainties still exist regarding the primary controlling factors of subsidence. This study employs multi-temporal InSAR data, combined with small baseline subset (SBAS–InSAR) technology to invert the high-precision ground line of sight deformation fields, and conducts time-series decomposition analysis using the Seasonal Trend Decomposition (STL) method. The results show that from 2017 to 2025, subsidence was mainly concentrated in the central and southern regions of the basin, with a maximum cumulative subsidence exceeding 200 mm and an average annual subsidence rate of −40 mm/year. Its spatial distribution is highly consistent with major structural zones such as the Zhongtiao Mountain Front Fault and the Linyi Fault, indicating that fault activity exerts a significant controlling effect on subsidence patterns. Groundwater level fluctuations are positively correlated with overall ground subsidence, and the response rate of different monitoring points is constrained by differences in aquifer depth and permeability. Groundwater aquifer points exhibit rapid and reversible subsidence response, while confined aquifer points are affected by low-permeability or compressible layers, showing a significant lag effect. The research results indicate that time-series analysis based on InSAR can not only effectively reveal the subsidence evolution process at different scales, but also provide a scientific basis for groundwater resource regulation, geological disaster prevention and control, and sustainable regional land utilization.

The comprehensive, accurate, and rapid acquisition of large-scale surface deformation using Interferometric Synthetic Aperture Radar (InSAR) technology provides crucial information support for regional eco-geological safety assessments and the rational development and utilization of groundwater resources. The Linfen-Yuncheng Basin in Shanxi Province is one of China’s historically most frequented regions for geological hazards in plain areas, such as land subsidence and ground fissures. This study employed the coherent point targets based Small Baseline Subset (SBAS) time-series InSAR technique to interpret a dataset of 224 scenes of 5 m resolution RADARSAT-2 satellite SAR images acquired from January 2017 to May 2024. This enabled the acquisition of high-resolution spatiotemporal characteristics of surface deformation in the Linfen-Yuncheng Basin during the monitoring period. The results show that the area with a deformation rate exceeding 5 mm/a in the study area accounts for 12.3% of the total area, among which the subsidence area accounts for 11.1% and the uplift area accounts for 1.2%, indicating that the overall surface is relatively stable. There are four relatively significant local subsidence areas in the study area. The total area with a rate exceeding 30 mm/a is 41.12 km², and the maximum cumulative subsidence is close to 810 mm. By combining high-resolution satellite images and field survey data, it is found that the causes of the four subsidence areas are all the extraction of groundwater for production, living, and agricultural irrigation. This conclusion is further confirmed by comparing the InSAR monitoring results with the groundwater level data of monitoring wells. In addition, on-site investigations reveal that there is a mutually promoting and spatially symbiotic relationship between land subsidence and ground fissures in the study area. The non-uniform subsidence areas monitored by InSAR show significant ground fissure activity characteristics. The InSAR monitoring results can be used to guide the identification and analysis of ground fissure disasters. This study also finds that due to the implementation of surface water supply projects, the demand for groundwater in the study area has been continuously decreasing. The problem of ground water over-extraction has been gradually alleviated, which in turn promotes the continuous recovery of the groundwater level and reduces the development intensity of land subsidence and ground fissures.

Real-world environment-derived point clouds invariably exhibit noise across varying modalities and intensities. Hence, point cloud denoising (PCD) is essential as a preprocessing step to improve downstream task performance. Deep learning (DL)-based PCD models, known for their strong representation capabilities and flexible architectures, have surpassed traditional methods in denoising performance. To our best knowledge, despite recent advances in performance, no comprehensive survey systematically summarizes the developments of DL-based PCD. To fill the gap, this paper seeks to identify key challenges in DL-based PCD, summarizes the main contributions of existing methods, and proposes a taxonomy tailored to denoising tasks. To achieve this goal, we formulate PCD as a two-step process: outlier removal and surface noise restoration, encompassing most scenarios and requirements of PCD. Additionally, we compare methods in terms of similarities, differences, and respective advantages. Finally, we discuss research limitations and future directions, offering insights for further advancements in PCD.

In high-resolution and wide-swath (HRWS) synthetic aperture radar (SAR) imaging, the azimuth multi-channel technique effectively suppresses azimuth ambiguity, serving as a reliable approach for achieving wide-swath imaging. However, due to mechanical vibrations of the platform and airflow instabilities, airborne SAR may experience errors in attitude and flight path during operation. Furthermore, errors also exist in the antenna patterns, frequency stability, and phase noise among the azimuth multi-channels. The presence of these errors can cause azimuth multi-channel reconstruction failure, resulting in azimuth ambiguity and significantly degrading the quality of HRWS images. This article presents a novel error correction method for airborne HRWS SAR based on azimuth-variant attitude and range-variant Doppler domain pattern, which simultaneously considers the effects of various errors, including channel attitude errors and Doppler domain antenna pattern errors, on azimuth reconstruction. Attitude errors are the primary cause of azimuth-variant errors between channels. This article uses the vector method and attitude transformation matrix to calculate and compensate for the attitude errors of azimuth multi-channels, and employs the two-dimensional frequency-domain echo interferometry method to calculate the fixed delay errors and fixed phase errors. To better achieve channel error compensation, this scheme also considers the estimation and compensation of Doppler domain antenna pattern errors in wide-swath scenes. Finally, the effectiveness of the proposed scheme is confirmed through simulations and processing of airborne real data.

As a novel system, multi-dimensional space joint-observation SAR (MSJosSAR) can simultaneously acquire target information across multiple dimensions such as frequency, angle, and polarization. This capability facilitates a more comprehensive understanding of the target and enhances subsequent recognition applications. However, current research on the configuration optimization of multi-dimensional SAR systems is limited, particularly in balancing recognition requirements with observation costs. This limitation has become a major bottleneck restricting the development of MSJosSAR. Moreover, studies on the joint utilization of multi-dimensional information at the scattering center level remain insufficient, which constrains the effectiveness of target component recognition. To address these challenges, this paper proposes a configuration optimization method for MSJosSAR based on the separability of scattering mechanisms. The approach transforms the configuration optimization problem into a vector separability problem commonly addressed in machine learning. Experimental results demonstrate that the multi-dimensional configuration obtained by this method significantly improves the classification accuracy of scattering mechanisms. Additionally, we propose a feature extraction and classification method for scattering centers across frequency and angle-polarization dimensions, and validate its effectiveness through electromagnetic simulation experiments. This study offers valuable insights and references for MSJosSAR configuration optimization and joint feature information processing.

Impulse ultrawideband (UWB) synthetic aperture radar (SAR) combines high-azimuth-range resolution with robust penetration capabilities, making it ideal for applications such as through-wall detection and subsurface imaging. In such systems, the performance of UWB antennas is critical for transmitting high-power, large-bandwidth impulse signals. However, two primary factors degrade radar imaging quality: (1) inherent limitations in antenna radiation efficiency, which lead to low-frequency signal loss and subsequent time-domain ringing artifacts; (2) impedance mismatch at the antenna terminals, causing standing wave reflections that exacerbate the ringing phenomenon. This study systematically analyzes the mechanisms of ringing generation, including its physical origins and mathematical modeling in SAR systems. Building on this analysis, we propose a Bayesian ringing suppression algorithm based on sparse optimization. The method effectively enhances imaging quality while balancing the trade-off between ringing suppression and image fidelity. Validation through numerical simulations and experimental measurements demonstrates significant suppression of time-domain ringing and improved target clarity. The proposed approach holds critical importance for advancing impulse UWB SAR systems, particularly in scenarios requiring high-resolution imaging.