CWChandra Wulandari

Chandra Wulandari

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Chandra Wulandari has a total of 36 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Carbon-black-coupled bimetallic CoCu-ZIF composites for monohydroxylated polycyclic aromatic hydrocarbon metabolite sensing

    by Chandra Wulandari, Atqiya Muslihati, Ni Luh Wulan Septiani, Ahmad Nuruddin, Brian Yuliarto, Yusuke Yamauchi, Joel Henzie, Erwin Peiner, Hutomo Suryo Wasisto, Nugraha Nugraha

    Polycyclic aromatic hydrocarbons are hazardous, carcinogenic pollutants produced by the incomplete combustion of organic materials, and their detection remains a technological challenge. Here, we develop bimetallic cobalt-and-copper-based zeolitic imidazolate framework (CoCu-ZIF) particles coupled with carbon black (CB) for highly sensitive and selective electrochemical sensing of 2-Naphthol, a monohydroxylated polycyclic aromatic hydrocarbon. The CoCu-ZIF with dual redox-active sites of Co 3+ /Co 2+ and Cu 2+ /Cu + promotes efficient electron transfer during the oxidation process, thus effectively catalyzing the oxidation of 2-Naphthol. Carbon black provides a conductive network facilitating efficient electron transport between CoCu-ZIF and electrode surface. The fabricated sensors exhibit a sensitivity and limit of detection of 0.98 µA µM⁻¹ and 0.46 µM, respectively, during exposure to 2-Naphthol within a detection range of 1–500 µM. Moreover, due to their excellent sensing performance, selectivity, reproducibility, and recovery rate in non-biological urine, the developed composites offer strong potential for real-time polycyclic aromatic hydrocarbon monitoring and future use in environmental sensor technologies.


  • Open Access

    The utilization of the Taguchi method on microring resonator design parameters to enhance the value of the quality factor

    by Ahmad Aminudin, Lilik Hasanah, Harbi Setyo Nugroho, Chandra Wulandari, Budi Mulyanti, Roer Eka Pawinanto, Ahmad Rifqi Md Zain, Gandi Sugandi, Ida Hamidah, Widyaningrum Indrasari, et al.

    This study uses the Taguchi method to optimize the quality factor (Q-factor) of microring resonators (MRRs) for sensor applications. The MRRs are compact optical components widely used in biosensors and environmental monitoring due to their sensitivity to refractive index changes. The Q-factor, a key performance metric for MRRs, is significantly influenced by structural parameters such as ring radius (R), gap (g), waveguide width (W), and waveguide height (h). We employed a finite difference time domain (FDTD) simulation to model light propagation within the MRR and compute the corresponding Q-factor to identify the optimal combination of these parameters. An L9 orthogonal array (OA) is used in the Taguchi method to analyze each factor's influence with three levels systematically. The optimization resulted in a Q-factor of 6208.44, significantly higher than the baseline value, indicating a substantial improvement. Compared to previous works, this research highlights the advantages of combining FDTD-based electromagnetic modeling with statistical optimization, offering a structured yet efficient approach to MRR design. The proposed method enhances Q-factor performance and provides scalability for practical applications in biomedical and environmental sensing. These findings underscore the utility of Taguchi-based design in advancing the field of photonic sensor optimization.

  • Open Access

    High-performance electrochemical biosensor comprising Mn-ZIF-67 conjugated with anti-O antibody for Escherichia coli detection

    by Atqiya Muslihati, Chandra Wulandari, Ni Luh Wulan Septiani, Gilang Gumilar, Agus Subagio, Ida Hamidah, Nugraha Nugraha, Erwin Peiner, Hutomo Suryo Wasisto, Brian Yuliarto

    The detection of Escherichia coli (E. coli) in food and water is critical for public health, yet existing methods often lack sensitivity, speed, or field applicability. Here, we develop an electrochemical biosensor based on Mn-doped Co zeolitic imidazolate framework (ZIF-67) functionalized with anti-O antibody for sensitive E. coli detection. Mn incorporation induces phase reconstruction, surface area enhancement, and electron transfer. Antibody conjugation modulates wettability, introduces amide I and II vibrational modes, and selectively blocks electron transfer upon bacterial binding. The biosensor exhibits a linear range of 10 to 1010 CFU mL–1 with a 1 CFU mL–1 detection limit, outperforming optical and other metal organic framework-based sensors. It can discriminate non-target bacteria (Salmonella, Pseudomonas aeruginosa, Staphylococcus aureus), maintain >80% sensitivity over 5 weeks, and recover 93.10 –107.52% E. coli spiked in tap water. This work suggests the tremendous potential for on-site pathogen monitoring.


  • Label-free and early detection of HER2 breast cancer biomarker based on UiO-66-NH2 modified gold chip (Au/UiO-66-NH2) using surface plasmon resonance technique

    by Lena Rahmidar, Gilang Gumilar, Ni Luh Wulan Septiani, Chandra Wulandari, Muhammad Iqbal, Nugraha Nugraha, Shofarul Wustoni, Brian Yuliarto


  • Open Access

    SPR-Based Sensor for the Early Detection or Monitoring of Kidney Problems

    by Budi Mulyanti, Harbi Setyo Nugroho, Chandra Wulandari, Yuni Rahmawati, Lilik Hasanah, Ida Hamidah, Roer Eka Pawinanto, Burhanuddin Yeop Majlis

    SPR-based technology has emerged as one of the most versatile optical tools for analyzing the binding mechanism of molecular interaction due to its inherent advantages in sensing applications, such as real-time, label-free, and high sensitivity characteristics. SPR is widely used in various fields, including healthcare, environmental management, and food-borne illness analysis. Meanwhile, kidney disease has grown to be one of the world’s most serious public health problems in recent decades, resulting in physical degeneration and even death. As a result, several studies have published their findings regarding developing of reliable sensor technology based on the SPR phenomenon. However, an integrated and comprehensive discussion regarding the application of SPR-based sensors for detecting of kidney disease has not yet been found. Therefore, this review will discuss the recent advancements in the development of SPR-based sensors for monitoring kidney-related diseases. Numerous SPR configurations will be discussed, including Kretschmann, Otto, optical fiber-based SPR, and LSPR, which are all used to detect analytes associated with kidney disease, including urea, creatinine, glucose, uric acid, and dopamine. This review aims to show the broad application of SPR sensors which encouraged the development of SPR sensors for kidney problems monitoring.


  • Open Access

    Absorption Performance of Doped TiO2-Based Perovskite Solar Cell using FDTD Simulation

    by Budi Mulyanti, Chandra Wulandari, Lilik Hasanah, Roer Eka Pawinanto, Ida Hamidah

    In the third generation of the solar cell era, significant trends in the development of perovskite solar cells (PSC) were observed. Exploring suitable materials for its wafer structure, such as perovskite and electron transport layers (ETL), were a major emphasis of high-performance PSC development. Because of its matching band structure to MaPbI3, TiO2 is the most often utilized material for ETL. However, in the application of TiO2 to PSC, electron trapping and a wide energy gap become a drawback. The goal of this research is to improve the absorption performance of PSC employing ETL with Fe and Ta-doped TiO2 as well as the thickness of the material. The interaction between the electromagnetic waves of light and the solar cell structure was calculated using Finite-Difference Time-Domain (FDTD) simulations, which resulted in the absorption spectra. In comparison to pure TiO2, which absorbs only 79.5 of the incident light, Fe-TiO2 and Ta-TiO2 as ETL in solar cells have increased absorption spectra to 81.7 and 81.2, respectively. Finally, we may conclude that the optimum ETL layer parameters are 0.32 Fe doping and a thickness of 100nm.


  • Open Access

    Dimensional Optimization of TiO2 Nanodisk Photonic Crystals on Lead Iodide (MAPbI3) Perovskite Solar Cells by Using FDTD Simulations

    by Lilik Hasanah, Adryan Ashidiq, Roer Eka Pawinanto, Budi Mulyanti, Chandra Wulandari, Wiendartun, Ahmad Rifqi Md. Zain

    Perovskite solar cells (PSC) are currently exhibiting reproducible high efficiency, low-cost manufacturing, and scalable electron transport layers (ETL), which are becoming increasingly important. The application of photonic crystals (PC) on solar cells has been proven to enhance light harvesting and lead solar cells to adjust the propagation and distribution of photons. In this paper, the optimization of a two-dimensional nanodisk PC introduced in ETL with an organic-inorganic lead-iodide perovskite (methylammonium lead-iodide, MAPbI3) as the absorber layer was studied. A finite-difference time-domain (FDTD) simulation was used to evaluate the optical performance of PSC with various lattice constants and a radius of nanodisk photonic crystals. According to the simulation, the optimum lattice constant and PC radius applied to ETL are 500 nm and 225 nm, respectively. This optimum design enhances PSC absorption performance by more than 94% of incident light.